| #ifndef DEF_RDMAVT_INCQP_H |
| #define DEF_RDMAVT_INCQP_H |
| |
| /* |
| * Copyright(c) 2016 - 2019 Intel Corporation. |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * BSD LICENSE |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * - Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * - Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * - Neither the name of Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| |
| #include <rdma/rdma_vt.h> |
| #include <rdma/ib_pack.h> |
| #include <rdma/ib_verbs.h> |
| #include <rdma/rdmavt_cq.h> |
| #include <rdma/rvt-abi.h> |
| /* |
| * Atomic bit definitions for r_aflags. |
| */ |
| #define RVT_R_WRID_VALID 0 |
| #define RVT_R_REWIND_SGE 1 |
| |
| /* |
| * Bit definitions for r_flags. |
| */ |
| #define RVT_R_REUSE_SGE 0x01 |
| #define RVT_R_RDMAR_SEQ 0x02 |
| #define RVT_R_RSP_NAK 0x04 |
| #define RVT_R_RSP_SEND 0x08 |
| #define RVT_R_COMM_EST 0x10 |
| |
| /* |
| * Bit definitions for s_flags. |
| * |
| * RVT_S_SIGNAL_REQ_WR - set if QP send WRs contain completion signaled |
| * RVT_S_BUSY - send tasklet is processing the QP |
| * RVT_S_TIMER - the RC retry timer is active |
| * RVT_S_ACK_PENDING - an ACK is waiting to be sent after RDMA read/atomics |
| * RVT_S_WAIT_FENCE - waiting for all prior RDMA read or atomic SWQEs |
| * before processing the next SWQE |
| * RVT_S_WAIT_RDMAR - waiting for a RDMA read or atomic SWQE to complete |
| * before processing the next SWQE |
| * RVT_S_WAIT_RNR - waiting for RNR timeout |
| * RVT_S_WAIT_SSN_CREDIT - waiting for RC credits to process next SWQE |
| * RVT_S_WAIT_DMA - waiting for send DMA queue to drain before generating |
| * next send completion entry not via send DMA |
| * RVT_S_WAIT_PIO - waiting for a send buffer to be available |
| * RVT_S_WAIT_TX - waiting for a struct verbs_txreq to be available |
| * RVT_S_WAIT_DMA_DESC - waiting for DMA descriptors to be available |
| * RVT_S_WAIT_KMEM - waiting for kernel memory to be available |
| * RVT_S_WAIT_PSN - waiting for a packet to exit the send DMA queue |
| * RVT_S_WAIT_ACK - waiting for an ACK packet before sending more requests |
| * RVT_S_SEND_ONE - send one packet, request ACK, then wait for ACK |
| * RVT_S_ECN - a BECN was queued to the send engine |
| * RVT_S_MAX_BIT_MASK - The max bit that can be used by rdmavt |
| */ |
| #define RVT_S_SIGNAL_REQ_WR 0x0001 |
| #define RVT_S_BUSY 0x0002 |
| #define RVT_S_TIMER 0x0004 |
| #define RVT_S_RESP_PENDING 0x0008 |
| #define RVT_S_ACK_PENDING 0x0010 |
| #define RVT_S_WAIT_FENCE 0x0020 |
| #define RVT_S_WAIT_RDMAR 0x0040 |
| #define RVT_S_WAIT_RNR 0x0080 |
| #define RVT_S_WAIT_SSN_CREDIT 0x0100 |
| #define RVT_S_WAIT_DMA 0x0200 |
| #define RVT_S_WAIT_PIO 0x0400 |
| #define RVT_S_WAIT_TX 0x0800 |
| #define RVT_S_WAIT_DMA_DESC 0x1000 |
| #define RVT_S_WAIT_KMEM 0x2000 |
| #define RVT_S_WAIT_PSN 0x4000 |
| #define RVT_S_WAIT_ACK 0x8000 |
| #define RVT_S_SEND_ONE 0x10000 |
| #define RVT_S_UNLIMITED_CREDIT 0x20000 |
| #define RVT_S_ECN 0x40000 |
| #define RVT_S_MAX_BIT_MASK 0x800000 |
| |
| /* |
| * Drivers should use s_flags starting with bit 31 down to the bit next to |
| * RVT_S_MAX_BIT_MASK |
| */ |
| |
| /* |
| * Wait flags that would prevent any packet type from being sent. |
| */ |
| #define RVT_S_ANY_WAIT_IO \ |
| (RVT_S_WAIT_PIO | RVT_S_WAIT_TX | \ |
| RVT_S_WAIT_DMA_DESC | RVT_S_WAIT_KMEM) |
| |
| /* |
| * Wait flags that would prevent send work requests from making progress. |
| */ |
| #define RVT_S_ANY_WAIT_SEND (RVT_S_WAIT_FENCE | RVT_S_WAIT_RDMAR | \ |
| RVT_S_WAIT_RNR | RVT_S_WAIT_SSN_CREDIT | RVT_S_WAIT_DMA | \ |
| RVT_S_WAIT_PSN | RVT_S_WAIT_ACK) |
| |
| #define RVT_S_ANY_WAIT (RVT_S_ANY_WAIT_IO | RVT_S_ANY_WAIT_SEND) |
| |
| /* Number of bits to pay attention to in the opcode for checking qp type */ |
| #define RVT_OPCODE_QP_MASK 0xE0 |
| |
| /* Flags for checking QP state (see ib_rvt_state_ops[]) */ |
| #define RVT_POST_SEND_OK 0x01 |
| #define RVT_POST_RECV_OK 0x02 |
| #define RVT_PROCESS_RECV_OK 0x04 |
| #define RVT_PROCESS_SEND_OK 0x08 |
| #define RVT_PROCESS_NEXT_SEND_OK 0x10 |
| #define RVT_FLUSH_SEND 0x20 |
| #define RVT_FLUSH_RECV 0x40 |
| #define RVT_PROCESS_OR_FLUSH_SEND \ |
| (RVT_PROCESS_SEND_OK | RVT_FLUSH_SEND) |
| #define RVT_SEND_OR_FLUSH_OR_RECV_OK \ |
| (RVT_PROCESS_SEND_OK | RVT_FLUSH_SEND | RVT_PROCESS_RECV_OK) |
| |
| /* |
| * Internal send flags |
| */ |
| #define RVT_SEND_RESERVE_USED IB_SEND_RESERVED_START |
| #define RVT_SEND_COMPLETION_ONLY (IB_SEND_RESERVED_START << 1) |
| |
| /** |
| * rvt_ud_wr - IB UD work plus AH cache |
| * @wr: valid IB work request |
| * @attr: pointer to an allocated AH attribute |
| * |
| * Special case the UD WR so we can keep track of the AH attributes. |
| * |
| * NOTE: This data structure is stricly ordered wr then attr. I.e the attr |
| * MUST come after wr. The ib_ud_wr is sized and copied in rvt_post_one_wr. |
| * The copy assumes that wr is first. |
| */ |
| struct rvt_ud_wr { |
| struct ib_ud_wr wr; |
| struct rdma_ah_attr *attr; |
| }; |
| |
| /* |
| * Send work request queue entry. |
| * The size of the sg_list is determined when the QP is created and stored |
| * in qp->s_max_sge. |
| */ |
| struct rvt_swqe { |
| union { |
| struct ib_send_wr wr; /* don't use wr.sg_list */ |
| struct rvt_ud_wr ud_wr; |
| struct ib_reg_wr reg_wr; |
| struct ib_rdma_wr rdma_wr; |
| struct ib_atomic_wr atomic_wr; |
| }; |
| u32 psn; /* first packet sequence number */ |
| u32 lpsn; /* last packet sequence number */ |
| u32 ssn; /* send sequence number */ |
| u32 length; /* total length of data in sg_list */ |
| void *priv; /* driver dependent field */ |
| struct rvt_sge sg_list[0]; |
| }; |
| |
| /** |
| * struct rvt_krwq - kernel struct receive work request |
| * @p_lock: lock to protect producer of the kernel buffer |
| * @head: index of next entry to fill |
| * @c_lock:lock to protect consumer of the kernel buffer |
| * @tail: index of next entry to pull |
| * @count: count is aproximate of total receive enteries posted |
| * @rvt_rwqe: struct of receive work request queue entry |
| * |
| * This structure is used to contain the head pointer, |
| * tail pointer and receive work queue entries for kernel |
| * mode user. |
| */ |
| struct rvt_krwq { |
| spinlock_t p_lock; /* protect producer */ |
| u32 head; /* new work requests posted to the head */ |
| |
| /* protect consumer */ |
| spinlock_t c_lock ____cacheline_aligned_in_smp; |
| u32 tail; /* receives pull requests from here. */ |
| u32 count; /* approx count of receive entries posted */ |
| struct rvt_rwqe *curr_wq; |
| struct rvt_rwqe wq[]; |
| }; |
| |
| /* |
| * rvt_get_swqe_ah - Return the pointer to the struct rvt_ah |
| * @swqe: valid Send WQE |
| * |
| */ |
| static inline struct rvt_ah *rvt_get_swqe_ah(struct rvt_swqe *swqe) |
| { |
| return ibah_to_rvtah(swqe->ud_wr.wr.ah); |
| } |
| |
| /** |
| * rvt_get_swqe_ah_attr - Return the cached ah attribute information |
| * @swqe: valid Send WQE |
| * |
| */ |
| static inline struct rdma_ah_attr *rvt_get_swqe_ah_attr(struct rvt_swqe *swqe) |
| { |
| return swqe->ud_wr.attr; |
| } |
| |
| /** |
| * rvt_get_swqe_remote_qpn - Access the remote QPN value |
| * @swqe: valid Send WQE |
| * |
| */ |
| static inline u32 rvt_get_swqe_remote_qpn(struct rvt_swqe *swqe) |
| { |
| return swqe->ud_wr.wr.remote_qpn; |
| } |
| |
| /** |
| * rvt_get_swqe_remote_qkey - Acces the remote qkey value |
| * @swqe: valid Send WQE |
| * |
| */ |
| static inline u32 rvt_get_swqe_remote_qkey(struct rvt_swqe *swqe) |
| { |
| return swqe->ud_wr.wr.remote_qkey; |
| } |
| |
| /** |
| * rvt_get_swqe_pkey_index - Access the pkey index |
| * @swqe: valid Send WQE |
| * |
| */ |
| static inline u16 rvt_get_swqe_pkey_index(struct rvt_swqe *swqe) |
| { |
| return swqe->ud_wr.wr.pkey_index; |
| } |
| |
| struct rvt_rq { |
| struct rvt_rwq *wq; |
| struct rvt_krwq *kwq; |
| u32 size; /* size of RWQE array */ |
| u8 max_sge; |
| /* protect changes in this struct */ |
| spinlock_t lock ____cacheline_aligned_in_smp; |
| }; |
| |
| /* |
| * This structure holds the information that the send tasklet needs |
| * to send a RDMA read response or atomic operation. |
| */ |
| struct rvt_ack_entry { |
| struct rvt_sge rdma_sge; |
| u64 atomic_data; |
| u32 psn; |
| u32 lpsn; |
| u8 opcode; |
| u8 sent; |
| void *priv; |
| }; |
| |
| #define RC_QP_SCALING_INTERVAL 5 |
| |
| #define RVT_OPERATION_PRIV 0x00000001 |
| #define RVT_OPERATION_ATOMIC 0x00000002 |
| #define RVT_OPERATION_ATOMIC_SGE 0x00000004 |
| #define RVT_OPERATION_LOCAL 0x00000008 |
| #define RVT_OPERATION_USE_RESERVE 0x00000010 |
| #define RVT_OPERATION_IGN_RNR_CNT 0x00000020 |
| |
| #define RVT_OPERATION_MAX (IB_WR_RESERVED10 + 1) |
| |
| /** |
| * rvt_operation_params - op table entry |
| * @length - the length to copy into the swqe entry |
| * @qpt_support - a bit mask indicating QP type support |
| * @flags - RVT_OPERATION flags (see above) |
| * |
| * This supports table driven post send so that |
| * the driver can have differing an potentially |
| * different sets of operations. |
| * |
| **/ |
| |
| struct rvt_operation_params { |
| size_t length; |
| u32 qpt_support; |
| u32 flags; |
| }; |
| |
| /* |
| * Common variables are protected by both r_rq.lock and s_lock in that order |
| * which only happens in modify_qp() or changing the QP 'state'. |
| */ |
| struct rvt_qp { |
| struct ib_qp ibqp; |
| void *priv; /* Driver private data */ |
| /* read mostly fields above and below */ |
| struct rdma_ah_attr remote_ah_attr; |
| struct rdma_ah_attr alt_ah_attr; |
| struct rvt_qp __rcu *next; /* link list for QPN hash table */ |
| struct rvt_swqe *s_wq; /* send work queue */ |
| struct rvt_mmap_info *ip; |
| |
| unsigned long timeout_jiffies; /* computed from timeout */ |
| |
| int srate_mbps; /* s_srate (below) converted to Mbit/s */ |
| pid_t pid; /* pid for user mode QPs */ |
| u32 remote_qpn; |
| u32 qkey; /* QKEY for this QP (for UD or RD) */ |
| u32 s_size; /* send work queue size */ |
| |
| u16 pmtu; /* decoded from path_mtu */ |
| u8 log_pmtu; /* shift for pmtu */ |
| u8 state; /* QP state */ |
| u8 allowed_ops; /* high order bits of allowed opcodes */ |
| u8 qp_access_flags; |
| u8 alt_timeout; /* Alternate path timeout for this QP */ |
| u8 timeout; /* Timeout for this QP */ |
| u8 s_srate; |
| u8 s_mig_state; |
| u8 port_num; |
| u8 s_pkey_index; /* PKEY index to use */ |
| u8 s_alt_pkey_index; /* Alternate path PKEY index to use */ |
| u8 r_max_rd_atomic; /* max number of RDMA read/atomic to receive */ |
| u8 s_max_rd_atomic; /* max number of RDMA read/atomic to send */ |
| u8 s_retry_cnt; /* number of times to retry */ |
| u8 s_rnr_retry_cnt; |
| u8 r_min_rnr_timer; /* retry timeout value for RNR NAKs */ |
| u8 s_max_sge; /* size of s_wq->sg_list */ |
| u8 s_draining; |
| |
| /* start of read/write fields */ |
| atomic_t refcount ____cacheline_aligned_in_smp; |
| wait_queue_head_t wait; |
| |
| struct rvt_ack_entry *s_ack_queue; |
| struct rvt_sge_state s_rdma_read_sge; |
| |
| spinlock_t r_lock ____cacheline_aligned_in_smp; /* used for APM */ |
| u32 r_psn; /* expected rcv packet sequence number */ |
| unsigned long r_aflags; |
| u64 r_wr_id; /* ID for current receive WQE */ |
| u32 r_ack_psn; /* PSN for next ACK or atomic ACK */ |
| u32 r_len; /* total length of r_sge */ |
| u32 r_rcv_len; /* receive data len processed */ |
| u32 r_msn; /* message sequence number */ |
| |
| u8 r_state; /* opcode of last packet received */ |
| u8 r_flags; |
| u8 r_head_ack_queue; /* index into s_ack_queue[] */ |
| u8 r_adefered; /* defered ack count */ |
| |
| struct list_head rspwait; /* link for waiting to respond */ |
| |
| struct rvt_sge_state r_sge; /* current receive data */ |
| struct rvt_rq r_rq; /* receive work queue */ |
| |
| /* post send line */ |
| spinlock_t s_hlock ____cacheline_aligned_in_smp; |
| u32 s_head; /* new entries added here */ |
| u32 s_next_psn; /* PSN for next request */ |
| u32 s_avail; /* number of entries avail */ |
| u32 s_ssn; /* SSN of tail entry */ |
| atomic_t s_reserved_used; /* reserved entries in use */ |
| |
| spinlock_t s_lock ____cacheline_aligned_in_smp; |
| u32 s_flags; |
| struct rvt_sge_state *s_cur_sge; |
| struct rvt_swqe *s_wqe; |
| struct rvt_sge_state s_sge; /* current send request data */ |
| struct rvt_mregion *s_rdma_mr; |
| u32 s_len; /* total length of s_sge */ |
| u32 s_rdma_read_len; /* total length of s_rdma_read_sge */ |
| u32 s_last_psn; /* last response PSN processed */ |
| u32 s_sending_psn; /* lowest PSN that is being sent */ |
| u32 s_sending_hpsn; /* highest PSN that is being sent */ |
| u32 s_psn; /* current packet sequence number */ |
| u32 s_ack_rdma_psn; /* PSN for sending RDMA read responses */ |
| u32 s_ack_psn; /* PSN for acking sends and RDMA writes */ |
| u32 s_tail; /* next entry to process */ |
| u32 s_cur; /* current work queue entry */ |
| u32 s_acked; /* last un-ACK'ed entry */ |
| u32 s_last; /* last completed entry */ |
| u32 s_lsn; /* limit sequence number (credit) */ |
| u32 s_ahgpsn; /* set to the psn in the copy of the header */ |
| u16 s_cur_size; /* size of send packet in bytes */ |
| u16 s_rdma_ack_cnt; |
| u8 s_hdrwords; /* size of s_hdr in 32 bit words */ |
| s8 s_ahgidx; |
| u8 s_state; /* opcode of last packet sent */ |
| u8 s_ack_state; /* opcode of packet to ACK */ |
| u8 s_nak_state; /* non-zero if NAK is pending */ |
| u8 r_nak_state; /* non-zero if NAK is pending */ |
| u8 s_retry; /* requester retry counter */ |
| u8 s_rnr_retry; /* requester RNR retry counter */ |
| u8 s_num_rd_atomic; /* number of RDMA read/atomic pending */ |
| u8 s_tail_ack_queue; /* index into s_ack_queue[] */ |
| u8 s_acked_ack_queue; /* index into s_ack_queue[] */ |
| |
| struct rvt_sge_state s_ack_rdma_sge; |
| struct timer_list s_timer; |
| struct hrtimer s_rnr_timer; |
| |
| atomic_t local_ops_pending; /* number of fast_reg/local_inv reqs */ |
| |
| /* |
| * This sge list MUST be last. Do not add anything below here. |
| */ |
| struct rvt_sge r_sg_list[0] /* verified SGEs */ |
| ____cacheline_aligned_in_smp; |
| }; |
| |
| struct rvt_srq { |
| struct ib_srq ibsrq; |
| struct rvt_rq rq; |
| struct rvt_mmap_info *ip; |
| /* send signal when number of RWQEs < limit */ |
| u32 limit; |
| }; |
| |
| static inline struct rvt_srq *ibsrq_to_rvtsrq(struct ib_srq *ibsrq) |
| { |
| return container_of(ibsrq, struct rvt_srq, ibsrq); |
| } |
| |
| static inline struct rvt_qp *ibqp_to_rvtqp(struct ib_qp *ibqp) |
| { |
| return container_of(ibqp, struct rvt_qp, ibqp); |
| } |
| |
| #define RVT_QPN_MAX BIT(24) |
| #define RVT_QPNMAP_ENTRIES (RVT_QPN_MAX / PAGE_SIZE / BITS_PER_BYTE) |
| #define RVT_BITS_PER_PAGE (PAGE_SIZE * BITS_PER_BYTE) |
| #define RVT_BITS_PER_PAGE_MASK (RVT_BITS_PER_PAGE - 1) |
| #define RVT_QPN_MASK IB_QPN_MASK |
| |
| /* |
| * QPN-map pages start out as NULL, they get allocated upon |
| * first use and are never deallocated. This way, |
| * large bitmaps are not allocated unless large numbers of QPs are used. |
| */ |
| struct rvt_qpn_map { |
| void *page; |
| }; |
| |
| struct rvt_qpn_table { |
| spinlock_t lock; /* protect changes to the qp table */ |
| unsigned flags; /* flags for QP0/1 allocated for each port */ |
| u32 last; /* last QP number allocated */ |
| u32 nmaps; /* size of the map table */ |
| u16 limit; |
| u8 incr; |
| /* bit map of free QP numbers other than 0/1 */ |
| struct rvt_qpn_map map[RVT_QPNMAP_ENTRIES]; |
| }; |
| |
| struct rvt_qp_ibdev { |
| u32 qp_table_size; |
| u32 qp_table_bits; |
| struct rvt_qp __rcu **qp_table; |
| spinlock_t qpt_lock; /* qptable lock */ |
| struct rvt_qpn_table qpn_table; |
| }; |
| |
| /* |
| * There is one struct rvt_mcast for each multicast GID. |
| * All attached QPs are then stored as a list of |
| * struct rvt_mcast_qp. |
| */ |
| struct rvt_mcast_qp { |
| struct list_head list; |
| struct rvt_qp *qp; |
| }; |
| |
| struct rvt_mcast_addr { |
| union ib_gid mgid; |
| u16 lid; |
| }; |
| |
| struct rvt_mcast { |
| struct rb_node rb_node; |
| struct rvt_mcast_addr mcast_addr; |
| struct list_head qp_list; |
| wait_queue_head_t wait; |
| atomic_t refcount; |
| int n_attached; |
| }; |
| |
| /* |
| * Since struct rvt_swqe is not a fixed size, we can't simply index into |
| * struct rvt_qp.s_wq. This function does the array index computation. |
| */ |
| static inline struct rvt_swqe *rvt_get_swqe_ptr(struct rvt_qp *qp, |
| unsigned n) |
| { |
| return (struct rvt_swqe *)((char *)qp->s_wq + |
| (sizeof(struct rvt_swqe) + |
| qp->s_max_sge * |
| sizeof(struct rvt_sge)) * n); |
| } |
| |
| /* |
| * Since struct rvt_rwqe is not a fixed size, we can't simply index into |
| * struct rvt_rwq.wq. This function does the array index computation. |
| */ |
| static inline struct rvt_rwqe *rvt_get_rwqe_ptr(struct rvt_rq *rq, unsigned n) |
| { |
| return (struct rvt_rwqe *) |
| ((char *)rq->kwq->curr_wq + |
| (sizeof(struct rvt_rwqe) + |
| rq->max_sge * sizeof(struct ib_sge)) * n); |
| } |
| |
| /** |
| * rvt_is_user_qp - return if this is user mode QP |
| * @qp - the target QP |
| */ |
| static inline bool rvt_is_user_qp(struct rvt_qp *qp) |
| { |
| return !!qp->pid; |
| } |
| |
| /** |
| * rvt_get_qp - get a QP reference |
| * @qp - the QP to hold |
| */ |
| static inline void rvt_get_qp(struct rvt_qp *qp) |
| { |
| atomic_inc(&qp->refcount); |
| } |
| |
| /** |
| * rvt_put_qp - release a QP reference |
| * @qp - the QP to release |
| */ |
| static inline void rvt_put_qp(struct rvt_qp *qp) |
| { |
| if (qp && atomic_dec_and_test(&qp->refcount)) |
| wake_up(&qp->wait); |
| } |
| |
| /** |
| * rvt_put_swqe - drop mr refs held by swqe |
| * @wqe - the send wqe |
| * |
| * This drops any mr references held by the swqe |
| */ |
| static inline void rvt_put_swqe(struct rvt_swqe *wqe) |
| { |
| int i; |
| |
| for (i = 0; i < wqe->wr.num_sge; i++) { |
| struct rvt_sge *sge = &wqe->sg_list[i]; |
| |
| rvt_put_mr(sge->mr); |
| } |
| } |
| |
| /** |
| * rvt_qp_wqe_reserve - reserve operation |
| * @qp - the rvt qp |
| * @wqe - the send wqe |
| * |
| * This routine used in post send to record |
| * a wqe relative reserved operation use. |
| */ |
| static inline void rvt_qp_wqe_reserve( |
| struct rvt_qp *qp, |
| struct rvt_swqe *wqe) |
| { |
| atomic_inc(&qp->s_reserved_used); |
| } |
| |
| /** |
| * rvt_qp_wqe_unreserve - clean reserved operation |
| * @qp - the rvt qp |
| * @flags - send wqe flags |
| * |
| * This decrements the reserve use count. |
| * |
| * This call MUST precede the change to |
| * s_last to insure that post send sees a stable |
| * s_avail. |
| * |
| * An smp_mp__after_atomic() is used to insure |
| * the compiler does not juggle the order of the s_last |
| * ring index and the decrementing of s_reserved_used. |
| */ |
| static inline void rvt_qp_wqe_unreserve(struct rvt_qp *qp, int flags) |
| { |
| if (unlikely(flags & RVT_SEND_RESERVE_USED)) { |
| atomic_dec(&qp->s_reserved_used); |
| /* insure no compiler re-order up to s_last change */ |
| smp_mb__after_atomic(); |
| } |
| } |
| |
| extern const enum ib_wc_opcode ib_rvt_wc_opcode[]; |
| |
| /* |
| * Compare the lower 24 bits of the msn values. |
| * Returns an integer <, ==, or > than zero. |
| */ |
| static inline int rvt_cmp_msn(u32 a, u32 b) |
| { |
| return (((int)a) - ((int)b)) << 8; |
| } |
| |
| /** |
| * rvt_compute_aeth - compute the AETH (syndrome + MSN) |
| * @qp: the queue pair to compute the AETH for |
| * |
| * Returns the AETH. |
| */ |
| __be32 rvt_compute_aeth(struct rvt_qp *qp); |
| |
| /** |
| * rvt_get_credit - flush the send work queue of a QP |
| * @qp: the qp who's send work queue to flush |
| * @aeth: the Acknowledge Extended Transport Header |
| * |
| * The QP s_lock should be held. |
| */ |
| void rvt_get_credit(struct rvt_qp *qp, u32 aeth); |
| |
| /** |
| * rvt_restart_sge - rewind the sge state for a wqe |
| * @ss: the sge state pointer |
| * @wqe: the wqe to rewind |
| * @len: the data length from the start of the wqe in bytes |
| * |
| * Returns the remaining data length. |
| */ |
| u32 rvt_restart_sge(struct rvt_sge_state *ss, struct rvt_swqe *wqe, u32 len); |
| |
| /** |
| * @qp - the qp pair |
| * @len - the length |
| * |
| * Perform a shift based mtu round up divide |
| */ |
| static inline u32 rvt_div_round_up_mtu(struct rvt_qp *qp, u32 len) |
| { |
| return (len + qp->pmtu - 1) >> qp->log_pmtu; |
| } |
| |
| /** |
| * @qp - the qp pair |
| * @len - the length |
| * |
| * Perform a shift based mtu divide |
| */ |
| static inline u32 rvt_div_mtu(struct rvt_qp *qp, u32 len) |
| { |
| return len >> qp->log_pmtu; |
| } |
| |
| /** |
| * rvt_timeout_to_jiffies - Convert a ULP timeout input into jiffies |
| * @timeout - timeout input(0 - 31). |
| * |
| * Return a timeout value in jiffies. |
| */ |
| static inline unsigned long rvt_timeout_to_jiffies(u8 timeout) |
| { |
| if (timeout > 31) |
| timeout = 31; |
| |
| return usecs_to_jiffies(1U << timeout) * 4096UL / 1000UL; |
| } |
| |
| /** |
| * rvt_lookup_qpn - return the QP with the given QPN |
| * @ibp: the ibport |
| * @qpn: the QP number to look up |
| * |
| * The caller must hold the rcu_read_lock(), and keep the lock until |
| * the returned qp is no longer in use. |
| */ |
| static inline struct rvt_qp *rvt_lookup_qpn(struct rvt_dev_info *rdi, |
| struct rvt_ibport *rvp, |
| u32 qpn) __must_hold(RCU) |
| { |
| struct rvt_qp *qp = NULL; |
| |
| if (unlikely(qpn <= 1)) { |
| qp = rcu_dereference(rvp->qp[qpn]); |
| } else { |
| u32 n = hash_32(qpn, rdi->qp_dev->qp_table_bits); |
| |
| for (qp = rcu_dereference(rdi->qp_dev->qp_table[n]); qp; |
| qp = rcu_dereference(qp->next)) |
| if (qp->ibqp.qp_num == qpn) |
| break; |
| } |
| return qp; |
| } |
| |
| /** |
| * rvt_mod_retry_timer - mod a retry timer |
| * @qp - the QP |
| * @shift - timeout shift to wait for multiple packets |
| * Modify a potentially already running retry timer |
| */ |
| static inline void rvt_mod_retry_timer_ext(struct rvt_qp *qp, u8 shift) |
| { |
| struct ib_qp *ibqp = &qp->ibqp; |
| struct rvt_dev_info *rdi = ib_to_rvt(ibqp->device); |
| |
| lockdep_assert_held(&qp->s_lock); |
| qp->s_flags |= RVT_S_TIMER; |
| /* 4.096 usec. * (1 << qp->timeout) */ |
| mod_timer(&qp->s_timer, jiffies + rdi->busy_jiffies + |
| (qp->timeout_jiffies << shift)); |
| } |
| |
| static inline void rvt_mod_retry_timer(struct rvt_qp *qp) |
| { |
| return rvt_mod_retry_timer_ext(qp, 0); |
| } |
| |
| /** |
| * rvt_put_qp_swqe - drop refs held by swqe |
| * @qp: the send qp |
| * @wqe: the send wqe |
| * |
| * This drops any references held by the swqe |
| */ |
| static inline void rvt_put_qp_swqe(struct rvt_qp *qp, struct rvt_swqe *wqe) |
| { |
| rvt_put_swqe(wqe); |
| if (qp->allowed_ops == IB_OPCODE_UD) |
| rdma_destroy_ah_attr(wqe->ud_wr.attr); |
| } |
| |
| /** |
| * rvt_qp_sqwe_incr - increment ring index |
| * @qp: the qp |
| * @val: the starting value |
| * |
| * Return: the new value wrapping as appropriate |
| */ |
| static inline u32 |
| rvt_qp_swqe_incr(struct rvt_qp *qp, u32 val) |
| { |
| if (++val >= qp->s_size) |
| val = 0; |
| return val; |
| } |
| |
| int rvt_error_qp(struct rvt_qp *qp, enum ib_wc_status err); |
| |
| /** |
| * rvt_recv_cq - add a new entry to completion queue |
| * by receive queue |
| * @qp: receive queue |
| * @wc: work completion entry to add |
| * @solicited: true if @entry is solicited |
| * |
| * This is wrapper function for rvt_enter_cq function call by |
| * receive queue. If rvt_cq_enter return false, it means cq is |
| * full and the qp is put into error state. |
| */ |
| static inline void rvt_recv_cq(struct rvt_qp *qp, struct ib_wc *wc, |
| bool solicited) |
| { |
| struct rvt_cq *cq = ibcq_to_rvtcq(qp->ibqp.recv_cq); |
| |
| if (unlikely(!rvt_cq_enter(cq, wc, solicited))) |
| rvt_error_qp(qp, IB_WC_LOC_QP_OP_ERR); |
| } |
| |
| /** |
| * rvt_send_cq - add a new entry to completion queue |
| * by send queue |
| * @qp: send queue |
| * @wc: work completion entry to add |
| * @solicited: true if @entry is solicited |
| * |
| * This is wrapper function for rvt_enter_cq function call by |
| * send queue. If rvt_cq_enter return false, it means cq is |
| * full and the qp is put into error state. |
| */ |
| static inline void rvt_send_cq(struct rvt_qp *qp, struct ib_wc *wc, |
| bool solicited) |
| { |
| struct rvt_cq *cq = ibcq_to_rvtcq(qp->ibqp.send_cq); |
| |
| if (unlikely(!rvt_cq_enter(cq, wc, solicited))) |
| rvt_error_qp(qp, IB_WC_LOC_QP_OP_ERR); |
| } |
| |
| /** |
| * rvt_qp_complete_swqe - insert send completion |
| * @qp - the qp |
| * @wqe - the send wqe |
| * @opcode - wc operation (driver dependent) |
| * @status - completion status |
| * |
| * Update the s_last information, and then insert a send |
| * completion into the completion |
| * queue if the qp indicates it should be done. |
| * |
| * See IBTA 10.7.3.1 for info on completion |
| * control. |
| * |
| * Return: new last |
| */ |
| static inline u32 |
| rvt_qp_complete_swqe(struct rvt_qp *qp, |
| struct rvt_swqe *wqe, |
| enum ib_wc_opcode opcode, |
| enum ib_wc_status status) |
| { |
| bool need_completion; |
| u64 wr_id; |
| u32 byte_len, last; |
| int flags = wqe->wr.send_flags; |
| |
| rvt_qp_wqe_unreserve(qp, flags); |
| rvt_put_qp_swqe(qp, wqe); |
| |
| need_completion = |
| !(flags & RVT_SEND_RESERVE_USED) && |
| (!(qp->s_flags & RVT_S_SIGNAL_REQ_WR) || |
| (flags & IB_SEND_SIGNALED) || |
| status != IB_WC_SUCCESS); |
| if (need_completion) { |
| wr_id = wqe->wr.wr_id; |
| byte_len = wqe->length; |
| /* above fields required before writing s_last */ |
| } |
| last = rvt_qp_swqe_incr(qp, qp->s_last); |
| /* see rvt_qp_is_avail() */ |
| smp_store_release(&qp->s_last, last); |
| if (need_completion) { |
| struct ib_wc w = { |
| .wr_id = wr_id, |
| .status = status, |
| .opcode = opcode, |
| .qp = &qp->ibqp, |
| .byte_len = byte_len, |
| }; |
| rvt_send_cq(qp, &w, status != IB_WC_SUCCESS); |
| } |
| return last; |
| } |
| |
| extern const int ib_rvt_state_ops[]; |
| |
| struct rvt_dev_info; |
| int rvt_get_rwqe(struct rvt_qp *qp, bool wr_id_only); |
| void rvt_comm_est(struct rvt_qp *qp); |
| void rvt_rc_error(struct rvt_qp *qp, enum ib_wc_status err); |
| unsigned long rvt_rnr_tbl_to_usec(u32 index); |
| enum hrtimer_restart rvt_rc_rnr_retry(struct hrtimer *t); |
| void rvt_add_rnr_timer(struct rvt_qp *qp, u32 aeth); |
| void rvt_del_timers_sync(struct rvt_qp *qp); |
| void rvt_stop_rc_timers(struct rvt_qp *qp); |
| void rvt_add_retry_timer_ext(struct rvt_qp *qp, u8 shift); |
| static inline void rvt_add_retry_timer(struct rvt_qp *qp) |
| { |
| rvt_add_retry_timer_ext(qp, 0); |
| } |
| |
| void rvt_copy_sge(struct rvt_qp *qp, struct rvt_sge_state *ss, |
| void *data, u32 length, |
| bool release, bool copy_last); |
| void rvt_send_complete(struct rvt_qp *qp, struct rvt_swqe *wqe, |
| enum ib_wc_status status); |
| void rvt_ruc_loopback(struct rvt_qp *qp); |
| |
| /** |
| * struct rvt_qp_iter - the iterator for QPs |
| * @qp - the current QP |
| * |
| * This structure defines the current iterator |
| * state for sequenced access to all QPs relative |
| * to an rvt_dev_info. |
| */ |
| struct rvt_qp_iter { |
| struct rvt_qp *qp; |
| /* private: backpointer */ |
| struct rvt_dev_info *rdi; |
| /* private: callback routine */ |
| void (*cb)(struct rvt_qp *qp, u64 v); |
| /* private: for arg to callback routine */ |
| u64 v; |
| /* private: number of SMI,GSI QPs for device */ |
| int specials; |
| /* private: current iterator index */ |
| int n; |
| }; |
| |
| /** |
| * ib_cq_tail - Return tail index of cq buffer |
| * @send_cq - The cq for send |
| * |
| * This is called in qp_iter_print to get tail |
| * of cq buffer. |
| */ |
| static inline u32 ib_cq_tail(struct ib_cq *send_cq) |
| { |
| struct rvt_cq *cq = ibcq_to_rvtcq(send_cq); |
| |
| return ibcq_to_rvtcq(send_cq)->ip ? |
| RDMA_READ_UAPI_ATOMIC(cq->queue->tail) : |
| ibcq_to_rvtcq(send_cq)->kqueue->tail; |
| } |
| |
| /** |
| * ib_cq_head - Return head index of cq buffer |
| * @send_cq - The cq for send |
| * |
| * This is called in qp_iter_print to get head |
| * of cq buffer. |
| */ |
| static inline u32 ib_cq_head(struct ib_cq *send_cq) |
| { |
| struct rvt_cq *cq = ibcq_to_rvtcq(send_cq); |
| |
| return ibcq_to_rvtcq(send_cq)->ip ? |
| RDMA_READ_UAPI_ATOMIC(cq->queue->head) : |
| ibcq_to_rvtcq(send_cq)->kqueue->head; |
| } |
| |
| /** |
| * rvt_free_rq - free memory allocated for rvt_rq struct |
| * @rvt_rq: request queue data structure |
| * |
| * This function should only be called if the rvt_mmap_info() |
| * has not succeeded. |
| */ |
| static inline void rvt_free_rq(struct rvt_rq *rq) |
| { |
| kvfree(rq->kwq); |
| rq->kwq = NULL; |
| vfree(rq->wq); |
| rq->wq = NULL; |
| } |
| |
| /** |
| * rvt_to_iport - Get the ibport pointer |
| * @qp: the qp pointer |
| * |
| * This function returns the ibport pointer from the qp pointer. |
| */ |
| static inline struct rvt_ibport *rvt_to_iport(struct rvt_qp *qp) |
| { |
| struct rvt_dev_info *rdi = ib_to_rvt(qp->ibqp.device); |
| |
| return rdi->ports[qp->port_num - 1]; |
| } |
| |
| /** |
| * rvt_rc_credit_avail - Check if there are enough RC credits for the request |
| * @qp: the qp |
| * @wqe: the request |
| * |
| * This function returns false when there are not enough credits for the given |
| * request and true otherwise. |
| */ |
| static inline bool rvt_rc_credit_avail(struct rvt_qp *qp, struct rvt_swqe *wqe) |
| { |
| lockdep_assert_held(&qp->s_lock); |
| if (!(qp->s_flags & RVT_S_UNLIMITED_CREDIT) && |
| rvt_cmp_msn(wqe->ssn, qp->s_lsn + 1) > 0) { |
| struct rvt_ibport *rvp = rvt_to_iport(qp); |
| |
| qp->s_flags |= RVT_S_WAIT_SSN_CREDIT; |
| rvp->n_rc_crwaits++; |
| return false; |
| } |
| return true; |
| } |
| |
| struct rvt_qp_iter *rvt_qp_iter_init(struct rvt_dev_info *rdi, |
| u64 v, |
| void (*cb)(struct rvt_qp *qp, u64 v)); |
| int rvt_qp_iter_next(struct rvt_qp_iter *iter); |
| void rvt_qp_iter(struct rvt_dev_info *rdi, |
| u64 v, |
| void (*cb)(struct rvt_qp *qp, u64 v)); |
| void rvt_qp_mr_clean(struct rvt_qp *qp, u32 lkey); |
| #endif /* DEF_RDMAVT_INCQP_H */ |