| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Ethernet LAN device configuration |
| # |
| |
| menuconfig ETHERNET |
| bool "Ethernet driver support" |
| depends on NET |
| default y |
| help |
| This section contains all the Ethernet device drivers. |
| |
| if ETHERNET |
| |
| config MDIO |
| tristate |
| |
| config SUNGEM_PHY |
| tristate |
| |
| source "drivers/net/ethernet/3com/Kconfig" |
| source "drivers/net/ethernet/actions/Kconfig" |
| source "drivers/net/ethernet/adaptec/Kconfig" |
| source "drivers/net/ethernet/aeroflex/Kconfig" |
| source "drivers/net/ethernet/agere/Kconfig" |
| source "drivers/net/ethernet/alacritech/Kconfig" |
| source "drivers/net/ethernet/allwinner/Kconfig" |
| source "drivers/net/ethernet/alteon/Kconfig" |
| source "drivers/net/ethernet/altera/Kconfig" |
| source "drivers/net/ethernet/amazon/Kconfig" |
| source "drivers/net/ethernet/amd/Kconfig" |
| source "drivers/net/ethernet/apm/Kconfig" |
| source "drivers/net/ethernet/apple/Kconfig" |
| source "drivers/net/ethernet/aquantia/Kconfig" |
| source "drivers/net/ethernet/arc/Kconfig" |
| source "drivers/net/ethernet/asix/Kconfig" |
| source "drivers/net/ethernet/atheros/Kconfig" |
| |
| config CX_ECAT |
| tristate "Beckhoff CX5020 EtherCAT master support" |
| depends on PCI |
| depends on X86 || COMPILE_TEST |
| help |
| Driver for EtherCAT master module located on CCAT FPGA |
| that can be found on Beckhoff CX5020, and possibly other of CX |
| Beckhoff CX series industrial PCs. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called ec_bhf. |
| |
| source "drivers/net/ethernet/broadcom/Kconfig" |
| source "drivers/net/ethernet/cadence/Kconfig" |
| source "drivers/net/ethernet/calxeda/Kconfig" |
| source "drivers/net/ethernet/cavium/Kconfig" |
| source "drivers/net/ethernet/chelsio/Kconfig" |
| source "drivers/net/ethernet/cirrus/Kconfig" |
| source "drivers/net/ethernet/cisco/Kconfig" |
| source "drivers/net/ethernet/cortina/Kconfig" |
| source "drivers/net/ethernet/davicom/Kconfig" |
| |
| config DNET |
| tristate "Dave ethernet support (DNET)" |
| depends on HAS_IOMEM |
| select PHYLIB |
| help |
| The Dave ethernet interface (DNET) is found on Qong Board FPGA. |
| Say Y to include support for the DNET chip. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called dnet. |
| |
| source "drivers/net/ethernet/dec/Kconfig" |
| source "drivers/net/ethernet/dlink/Kconfig" |
| source "drivers/net/ethernet/emulex/Kconfig" |
| source "drivers/net/ethernet/engleder/Kconfig" |
| source "drivers/net/ethernet/ezchip/Kconfig" |
| source "drivers/net/ethernet/faraday/Kconfig" |
| source "drivers/net/ethernet/freescale/Kconfig" |
| source "drivers/net/ethernet/fujitsu/Kconfig" |
| source "drivers/net/ethernet/fungible/Kconfig" |
| source "drivers/net/ethernet/google/Kconfig" |
| source "drivers/net/ethernet/hisilicon/Kconfig" |
| source "drivers/net/ethernet/huawei/Kconfig" |
| source "drivers/net/ethernet/i825xx/Kconfig" |
| source "drivers/net/ethernet/ibm/Kconfig" |
| source "drivers/net/ethernet/intel/Kconfig" |
| source "drivers/net/ethernet/xscale/Kconfig" |
| |
| config JME |
| tristate "JMicron(R) PCI-Express Gigabit Ethernet support" |
| depends on PCI |
| select CRC32 |
| select MII |
| help |
| This driver supports the PCI-Express gigabit ethernet adapters |
| based on JMicron JMC250 chipset. |
| |
| To compile this driver as a module, choose M here. The module |
| will be called jme. |
| |
| config KORINA |
| tristate "Korina (IDT RC32434) Ethernet support" |
| depends on MIKROTIK_RB532 || COMPILE_TEST |
| select CRC32 |
| select MII |
| help |
| If you have a Mikrotik RouterBoard 500 or IDT RC32434 |
| based system say Y. Otherwise say N. |
| |
| config LANTIQ_ETOP |
| tristate "Lantiq SoC ETOP driver" |
| depends on SOC_TYPE_XWAY |
| help |
| Support for the MII0 inside the Lantiq SoC |
| |
| config LANTIQ_XRX200 |
| tristate "Lantiq / Intel xRX200 PMAC network driver" |
| depends on SOC_TYPE_XWAY |
| help |
| Support for the PMAC of the Gigabit switch (GSWIP) inside the |
| Lantiq / Intel VRX200 VDSL SoC |
| |
| source "drivers/net/ethernet/litex/Kconfig" |
| source "drivers/net/ethernet/marvell/Kconfig" |
| source "drivers/net/ethernet/mediatek/Kconfig" |
| source "drivers/net/ethernet/mellanox/Kconfig" |
| source "drivers/net/ethernet/micrel/Kconfig" |
| source "drivers/net/ethernet/microchip/Kconfig" |
| source "drivers/net/ethernet/mscc/Kconfig" |
| source "drivers/net/ethernet/microsoft/Kconfig" |
| source "drivers/net/ethernet/moxa/Kconfig" |
| source "drivers/net/ethernet/myricom/Kconfig" |
| |
| config FEALNX |
| tristate "Myson MTD-8xx PCI Ethernet support" |
| depends on PCI |
| select CRC32 |
| select MII |
| help |
| Say Y here to support the Myson MTD-800 family of PCI-based Ethernet |
| cards. <http://www.myson.com.tw/> |
| |
| source "drivers/net/ethernet/ni/Kconfig" |
| source "drivers/net/ethernet/natsemi/Kconfig" |
| source "drivers/net/ethernet/neterion/Kconfig" |
| source "drivers/net/ethernet/netronome/Kconfig" |
| source "drivers/net/ethernet/8390/Kconfig" |
| source "drivers/net/ethernet/nvidia/Kconfig" |
| source "drivers/net/ethernet/nxp/Kconfig" |
| source "drivers/net/ethernet/oki-semi/Kconfig" |
| |
| config ETHOC |
| tristate "OpenCores 10/100 Mbps Ethernet MAC support" |
| depends on HAS_IOMEM && HAS_DMA |
| select MII |
| select PHYLIB |
| select CRC32 |
| select BITREVERSE |
| help |
| Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC. |
| |
| source "drivers/net/ethernet/packetengines/Kconfig" |
| source "drivers/net/ethernet/pasemi/Kconfig" |
| source "drivers/net/ethernet/pensando/Kconfig" |
| source "drivers/net/ethernet/qlogic/Kconfig" |
| source "drivers/net/ethernet/brocade/Kconfig" |
| source "drivers/net/ethernet/qualcomm/Kconfig" |
| source "drivers/net/ethernet/rdc/Kconfig" |
| source "drivers/net/ethernet/realtek/Kconfig" |
| source "drivers/net/ethernet/renesas/Kconfig" |
| source "drivers/net/ethernet/rocker/Kconfig" |
| source "drivers/net/ethernet/samsung/Kconfig" |
| source "drivers/net/ethernet/seeq/Kconfig" |
| source "drivers/net/ethernet/sgi/Kconfig" |
| source "drivers/net/ethernet/silan/Kconfig" |
| source "drivers/net/ethernet/sis/Kconfig" |
| source "drivers/net/ethernet/sfc/Kconfig" |
| source "drivers/net/ethernet/smsc/Kconfig" |
| source "drivers/net/ethernet/socionext/Kconfig" |
| source "drivers/net/ethernet/stmicro/Kconfig" |
| source "drivers/net/ethernet/sun/Kconfig" |
| source "drivers/net/ethernet/sunplus/Kconfig" |
| source "drivers/net/ethernet/synopsys/Kconfig" |
| source "drivers/net/ethernet/tehuti/Kconfig" |
| source "drivers/net/ethernet/ti/Kconfig" |
| source "drivers/net/ethernet/toshiba/Kconfig" |
| source "drivers/net/ethernet/tundra/Kconfig" |
| source "drivers/net/ethernet/vertexcom/Kconfig" |
| source "drivers/net/ethernet/via/Kconfig" |
| source "drivers/net/ethernet/wiznet/Kconfig" |
| source "drivers/net/ethernet/xilinx/Kconfig" |
| source "drivers/net/ethernet/xircom/Kconfig" |
| |
| endif # ETHERNET |