| /* |
| tm6000-input.c - driver for TM5600/TM6000/TM6010 USB video capture devices |
| |
| Copyright (C) 2010 Stefan Ringel <stefan.ringel@arcor.de> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation version 2 |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| |
| #include <linux/input.h> |
| #include <linux/usb.h> |
| |
| #include <media/ir-core.h> |
| #include <media/ir-common.h> |
| |
| #include "tm6000.h" |
| #include "tm6000-regs.h" |
| |
| static unsigned int ir_debug; |
| module_param(ir_debug, int, 0644); |
| MODULE_PARM_DESC(ir_debug, "enable debug message [IR]"); |
| |
| static unsigned int enable_ir = 1; |
| module_param(enable_ir, int, 0644); |
| MODULE_PARM_DESC(enable_ir, "enable ir (default is enable"); |
| |
| #undef dprintk |
| |
| #define dprintk(fmt, arg...) \ |
| if (ir_debug) { \ |
| printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \ |
| } |
| |
| struct tm6000_ir_poll_result { |
| u16 rc_data; |
| }; |
| |
| struct tm6000_IR { |
| struct tm6000_core *dev; |
| struct ir_input_dev *input; |
| struct ir_input_state ir; |
| char name[32]; |
| char phys[32]; |
| |
| /* poll expernal decoder */ |
| int polling; |
| struct delayed_work work; |
| u8 wait:1; |
| u8 key:1; |
| struct urb *int_urb; |
| u8 *urb_data; |
| |
| int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *); |
| |
| /* IR device properties */ |
| struct ir_dev_props props; |
| }; |
| |
| |
| void tm6000_ir_wait(struct tm6000_core *dev, u8 state) |
| { |
| struct tm6000_IR *ir = dev->ir; |
| |
| if (!dev->ir) |
| return; |
| |
| if (state) |
| ir->wait = 1; |
| else |
| ir->wait = 0; |
| } |
| |
| |
| static int tm6000_ir_config(struct tm6000_IR *ir) |
| { |
| struct tm6000_core *dev = ir->dev; |
| u8 buf[10]; |
| int rc; |
| |
| /* hack */ |
| buf[0] = 0xff; |
| buf[1] = 0xff; |
| buf[2] = 0xf2; |
| buf[3] = 0x2b; |
| buf[4] = 0x20; |
| buf[5] = 0x35; |
| buf[6] = 0x60; |
| buf[7] = 0x04; |
| buf[8] = 0xc0; |
| buf[9] = 0x08; |
| |
| rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR | |
| USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a); |
| msleep(100); |
| |
| if (rc < 0) { |
| printk(KERN_INFO "IR configuration failed"); |
| return rc; |
| } |
| return 0; |
| } |
| |
| static void tm6000_ir_urb_received(struct urb *urb) |
| { |
| struct tm6000_core *dev = urb->context; |
| struct tm6000_IR *ir = dev->ir; |
| int rc; |
| |
| if (urb->status != 0) |
| printk(KERN_INFO "not ready\n"); |
| else if (urb->actual_length > 0) { |
| memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length); |
| |
| dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0], |
| ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]); |
| |
| ir->key = 1; |
| } |
| |
| rc = usb_submit_urb(urb, GFP_ATOMIC); |
| } |
| |
| static int default_polling_getkey(struct tm6000_IR *ir, |
| struct tm6000_ir_poll_result *poll_result) |
| { |
| struct tm6000_core *dev = ir->dev; |
| int rc; |
| u8 buf[2]; |
| |
| if (ir->wait && !&dev->int_in) |
| return 0; |
| |
| if (&dev->int_in) { |
| if (ir->ir.ir_type == IR_TYPE_RC5) |
| poll_result->rc_data = ir->urb_data[0]; |
| else |
| poll_result->rc_data = ir->urb_data[0] | ir->urb_data[1] << 8; |
| } else { |
| tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0); |
| msleep(10); |
| tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1); |
| msleep(10); |
| |
| if (ir->ir.ir_type == IR_TYPE_RC5) { |
| rc = tm6000_read_write_usb(dev, USB_DIR_IN | |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| REQ_02_GET_IR_CODE, 0, 0, buf, 1); |
| |
| msleep(10); |
| |
| dprintk("read data=%02x\n", buf[0]); |
| if (rc < 0) |
| return rc; |
| |
| poll_result->rc_data = buf[0]; |
| } else { |
| rc = tm6000_read_write_usb(dev, USB_DIR_IN | |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| REQ_02_GET_IR_CODE, 0, 0, buf, 2); |
| |
| msleep(10); |
| |
| dprintk("read data=%04x\n", buf[0] | buf[1] << 8); |
| if (rc < 0) |
| return rc; |
| |
| poll_result->rc_data = buf[0] | buf[1] << 8; |
| } |
| if ((poll_result->rc_data & 0x00ff) != 0xff) |
| ir->key = 1; |
| } |
| return 0; |
| } |
| |
| static void tm6000_ir_handle_key(struct tm6000_IR *ir) |
| { |
| int result; |
| struct tm6000_ir_poll_result poll_result; |
| |
| /* read the registers containing the IR status */ |
| result = ir->get_key(ir, &poll_result); |
| if (result < 0) { |
| printk(KERN_INFO "ir->get_key() failed %d\n", result); |
| return; |
| } |
| |
| dprintk("ir->get_key result data=%04x\n", poll_result.rc_data); |
| |
| if (ir->key) { |
| ir_input_keydown(ir->input->input_dev, &ir->ir, |
| (u32)poll_result.rc_data); |
| |
| ir_input_nokey(ir->input->input_dev, &ir->ir); |
| ir->key = 0; |
| } |
| return; |
| } |
| |
| static void tm6000_ir_work(struct work_struct *work) |
| { |
| struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work); |
| |
| tm6000_ir_handle_key(ir); |
| schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling)); |
| } |
| |
| static int tm6000_ir_start(void *priv) |
| { |
| struct tm6000_IR *ir = priv; |
| |
| INIT_DELAYED_WORK(&ir->work, tm6000_ir_work); |
| schedule_delayed_work(&ir->work, 0); |
| |
| return 0; |
| } |
| |
| static void tm6000_ir_stop(void *priv) |
| { |
| struct tm6000_IR *ir = priv; |
| |
| cancel_delayed_work_sync(&ir->work); |
| } |
| |
| int tm6000_ir_change_protocol(void *priv, u64 ir_type) |
| { |
| struct tm6000_IR *ir = priv; |
| |
| ir->get_key = default_polling_getkey; |
| |
| tm6000_ir_config(ir); |
| /* TODO */ |
| return 0; |
| } |
| |
| int tm6000_ir_init(struct tm6000_core *dev) |
| { |
| struct tm6000_IR *ir; |
| struct ir_input_dev *ir_input_dev; |
| int err = -ENOMEM; |
| int pipe, size, rc; |
| |
| if (!enable_ir) |
| return -ENODEV; |
| |
| if (!dev->caps.has_remote) |
| return 0; |
| |
| if (!dev->ir_codes) |
| return 0; |
| |
| ir = kzalloc(sizeof(*ir), GFP_KERNEL); |
| ir_input_dev = kzalloc(sizeof(*ir_input_dev), GFP_KERNEL); |
| ir_input_dev->input_dev = input_allocate_device(); |
| if (!ir || !ir_input_dev || !ir_input_dev->input_dev) |
| goto err_out_free; |
| |
| /* record handles to ourself */ |
| ir->dev = dev; |
| dev->ir = ir; |
| |
| ir->input = ir_input_dev; |
| |
| /* input einrichten */ |
| ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC; |
| ir->props.priv = ir; |
| ir->props.change_protocol = tm6000_ir_change_protocol; |
| ir->props.open = tm6000_ir_start; |
| ir->props.close = tm6000_ir_stop; |
| ir->props.driver_type = RC_DRIVER_SCANCODE; |
| |
| ir->polling = 50; |
| |
| snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)", |
| dev->name); |
| |
| usb_make_path(dev->udev, ir->phys, sizeof(ir->phys)); |
| strlcat(ir->phys, "/input0", sizeof(ir->phys)); |
| |
| tm6000_ir_change_protocol(ir, IR_TYPE_UNKNOWN); |
| err = ir_input_init(ir_input_dev->input_dev, &ir->ir, IR_TYPE_OTHER); |
| if (err < 0) |
| goto err_out_free; |
| |
| ir_input_dev->input_dev->name = ir->name; |
| ir_input_dev->input_dev->phys = ir->phys; |
| ir_input_dev->input_dev->id.bustype = BUS_USB; |
| ir_input_dev->input_dev->id.version = 1; |
| ir_input_dev->input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor); |
| ir_input_dev->input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct); |
| |
| ir_input_dev->input_dev->dev.parent = &dev->udev->dev; |
| |
| if (&dev->int_in) { |
| dprintk("IR over int\n"); |
| |
| ir->int_urb = usb_alloc_urb(0, GFP_KERNEL); |
| |
| pipe = usb_rcvintpipe(dev->udev, |
| dev->int_in.endp->desc.bEndpointAddress |
| & USB_ENDPOINT_NUMBER_MASK); |
| |
| size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe)); |
| dprintk("IR max size: %d\n", size); |
| |
| ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL); |
| if (ir->int_urb->transfer_buffer == NULL) { |
| usb_free_urb(ir->int_urb); |
| goto err_out_stop; |
| } |
| dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval); |
| usb_fill_int_urb(ir->int_urb, dev->udev, pipe, |
| ir->int_urb->transfer_buffer, size, |
| tm6000_ir_urb_received, dev, |
| dev->int_in.endp->desc.bInterval); |
| rc = usb_submit_urb(ir->int_urb, GFP_KERNEL); |
| if (rc) { |
| kfree(ir->int_urb->transfer_buffer); |
| usb_free_urb(ir->int_urb); |
| err = rc; |
| goto err_out_stop; |
| } |
| ir->urb_data = kzalloc(size, GFP_KERNEL); |
| } |
| |
| /* ir register */ |
| err = ir_input_register(ir->input->input_dev, dev->ir_codes, |
| &ir->props, "tm6000"); |
| if (err) |
| goto err_out_stop; |
| |
| return 0; |
| |
| err_out_stop: |
| dev->ir = NULL; |
| err_out_free: |
| kfree(ir_input_dev); |
| kfree(ir); |
| return err; |
| } |
| |
| int tm6000_ir_fini(struct tm6000_core *dev) |
| { |
| struct tm6000_IR *ir = dev->ir; |
| |
| /* skip detach on non attached board */ |
| |
| if (!ir) |
| return 0; |
| |
| ir_input_unregister(ir->input->input_dev); |
| |
| if (ir->int_urb) { |
| usb_kill_urb(ir->int_urb); |
| kfree(ir->int_urb->transfer_buffer); |
| usb_free_urb(ir->int_urb); |
| ir->int_urb = NULL; |
| kfree(ir->urb_data); |
| ir->urb_data = NULL; |
| } |
| |
| kfree(ir->input); |
| ir->input = NULL; |
| kfree(ir); |
| dev->ir = NULL; |
| |
| return 0; |
| } |