| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2006-2007 PA Semi, Inc |
| * |
| * Authors: Kip Walker, PA Semi |
| * Olof Johansson, PA Semi |
| * |
| * Maintained by: Olof Johansson <olof@lixom.net> |
| * |
| * Based on arch/powerpc/platforms/maple/setup.c |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/console.h> |
| #include <linux/export.h> |
| #include <linux/pci.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/gfp.h> |
| #include <linux/irqdomain.h> |
| |
| #include <asm/iommu.h> |
| #include <asm/machdep.h> |
| #include <asm/i8259.h> |
| #include <asm/mpic.h> |
| #include <asm/smp.h> |
| #include <asm/time.h> |
| #include <asm/mmu.h> |
| #include <asm/debug.h> |
| |
| #include <pcmcia/ss.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/ds.h> |
| |
| #include "pasemi.h" |
| |
| /* SDC reset register, must be pre-mapped at reset time */ |
| static void __iomem *reset_reg; |
| |
| /* Various error status registers, must be pre-mapped at MCE time */ |
| |
| #define MAX_MCE_REGS 32 |
| struct mce_regs { |
| char *name; |
| void __iomem *addr; |
| }; |
| |
| static struct mce_regs mce_regs[MAX_MCE_REGS]; |
| static int num_mce_regs; |
| static int nmi_virq = 0; |
| |
| |
| static void __noreturn pas_restart(char *cmd) |
| { |
| /* Need to put others cpu in hold loop so they're not sleeping */ |
| smp_send_stop(); |
| udelay(10000); |
| printk("Restarting...\n"); |
| while (1) |
| out_le32(reset_reg, 0x6000000); |
| } |
| |
| #ifdef CONFIG_PPC_PASEMI_NEMO |
| static void pas_shutdown(void) |
| { |
| /* Set the PLD bit that makes the SB600 think the power button is being pressed */ |
| void __iomem *pld_map = ioremap(0xf5000000,4096); |
| while (1) |
| out_8(pld_map+7,0x01); |
| } |
| |
| /* RTC platform device structure as is not in device tree */ |
| static struct resource rtc_resource[] = {{ |
| .name = "rtc", |
| .start = 0x70, |
| .end = 0x71, |
| .flags = IORESOURCE_IO, |
| }, { |
| .name = "rtc", |
| .start = 8, |
| .end = 8, |
| .flags = IORESOURCE_IRQ, |
| }}; |
| |
| static inline void nemo_init_rtc(void) |
| { |
| platform_device_register_simple("rtc_cmos", -1, rtc_resource, 2); |
| } |
| |
| #else |
| |
| static inline void nemo_init_rtc(void) |
| { |
| } |
| #endif |
| |
| #ifdef CONFIG_SMP |
| static arch_spinlock_t timebase_lock; |
| static unsigned long timebase; |
| |
| static void pas_give_timebase(void) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| hard_irq_disable(); |
| arch_spin_lock(&timebase_lock); |
| mtspr(SPRN_TBCTL, TBCTL_FREEZE); |
| isync(); |
| timebase = get_tb(); |
| arch_spin_unlock(&timebase_lock); |
| |
| while (timebase) |
| barrier(); |
| mtspr(SPRN_TBCTL, TBCTL_RESTART); |
| local_irq_restore(flags); |
| } |
| |
| static void pas_take_timebase(void) |
| { |
| while (!timebase) |
| smp_rmb(); |
| |
| arch_spin_lock(&timebase_lock); |
| set_tb(timebase >> 32, timebase & 0xffffffff); |
| timebase = 0; |
| arch_spin_unlock(&timebase_lock); |
| } |
| |
| static struct smp_ops_t pas_smp_ops = { |
| .probe = smp_mpic_probe, |
| .message_pass = smp_mpic_message_pass, |
| .kick_cpu = smp_generic_kick_cpu, |
| .setup_cpu = smp_mpic_setup_cpu, |
| .give_timebase = pas_give_timebase, |
| .take_timebase = pas_take_timebase, |
| }; |
| #endif /* CONFIG_SMP */ |
| |
| static void __init pas_setup_arch(void) |
| { |
| #ifdef CONFIG_SMP |
| /* Setup SMP callback */ |
| smp_ops = &pas_smp_ops; |
| #endif |
| |
| /* Remap SDC register for doing reset */ |
| /* XXXOJN This should maybe come out of the device tree */ |
| reset_reg = ioremap(0xfc101100, 4); |
| } |
| |
| static int __init pas_setup_mce_regs(void) |
| { |
| struct pci_dev *dev; |
| int reg; |
| |
| /* Remap various SoC status registers for use by the MCE handler */ |
| |
| reg = 0; |
| |
| dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, NULL); |
| while (dev && reg < MAX_MCE_REGS) { |
| mce_regs[reg].name = kasprintf(GFP_KERNEL, |
| "mc%d_mcdebug_errsta", reg); |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x730); |
| dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, dev); |
| reg++; |
| } |
| |
| dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL); |
| if (dev && reg+4 < MAX_MCE_REGS) { |
| mce_regs[reg].name = "iobdbg_IntStatus1"; |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x438); |
| reg++; |
| mce_regs[reg].name = "iobdbg_IOCTbusIntDbgReg"; |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x454); |
| reg++; |
| mce_regs[reg].name = "iobiom_IntStatus"; |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc10); |
| reg++; |
| mce_regs[reg].name = "iobiom_IntDbgReg"; |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc1c); |
| reg++; |
| } |
| |
| dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa009, NULL); |
| if (dev && reg+2 < MAX_MCE_REGS) { |
| mce_regs[reg].name = "l2csts_IntStatus"; |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x200); |
| reg++; |
| mce_regs[reg].name = "l2csts_Cnt"; |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x214); |
| reg++; |
| } |
| |
| num_mce_regs = reg; |
| |
| return 0; |
| } |
| machine_device_initcall(pasemi, pas_setup_mce_regs); |
| |
| #ifdef CONFIG_PPC_PASEMI_NEMO |
| static void sb600_8259_cascade(struct irq_desc *desc) |
| { |
| struct irq_chip *chip = irq_desc_get_chip(desc); |
| unsigned int cascade_irq = i8259_irq(); |
| |
| if (cascade_irq) |
| generic_handle_irq(cascade_irq); |
| |
| chip->irq_eoi(&desc->irq_data); |
| } |
| |
| static void __init nemo_init_IRQ(struct mpic *mpic) |
| { |
| struct device_node *np; |
| int gpio_virq; |
| /* Connect the SB600's legacy i8259 controller */ |
| np = of_find_node_by_path("/pxp@0,e0000000"); |
| i8259_init(np, 0); |
| of_node_put(np); |
| |
| gpio_virq = irq_create_mapping(NULL, 3); |
| irq_set_irq_type(gpio_virq, IRQ_TYPE_LEVEL_HIGH); |
| irq_set_chained_handler(gpio_virq, sb600_8259_cascade); |
| mpic_unmask_irq(irq_get_irq_data(gpio_virq)); |
| |
| irq_set_default_host(mpic->irqhost); |
| } |
| |
| #else |
| |
| static inline void nemo_init_IRQ(struct mpic *mpic) |
| { |
| } |
| #endif |
| |
| static __init void pas_init_IRQ(void) |
| { |
| struct device_node *np; |
| struct device_node *root, *mpic_node; |
| unsigned long openpic_addr; |
| const unsigned int *opprop; |
| int naddr, opplen; |
| int mpic_flags; |
| const unsigned int *nmiprop; |
| struct mpic *mpic; |
| |
| mpic_node = NULL; |
| |
| for_each_node_by_type(np, "interrupt-controller") |
| if (of_device_is_compatible(np, "open-pic")) { |
| mpic_node = np; |
| break; |
| } |
| if (!mpic_node) |
| for_each_node_by_type(np, "open-pic") { |
| mpic_node = np; |
| break; |
| } |
| if (!mpic_node) { |
| pr_err("Failed to locate the MPIC interrupt controller\n"); |
| return; |
| } |
| |
| /* Find address list in /platform-open-pic */ |
| root = of_find_node_by_path("/"); |
| naddr = of_n_addr_cells(root); |
| opprop = of_get_property(root, "platform-open-pic", &opplen); |
| if (!opprop) { |
| pr_err("No platform-open-pic property.\n"); |
| of_node_put(root); |
| return; |
| } |
| openpic_addr = of_read_number(opprop, naddr); |
| pr_debug("OpenPIC addr: %lx\n", openpic_addr); |
| |
| mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS | MPIC_NO_RESET; |
| |
| nmiprop = of_get_property(mpic_node, "nmi-source", NULL); |
| if (nmiprop) |
| mpic_flags |= MPIC_ENABLE_MCK; |
| |
| mpic = mpic_alloc(mpic_node, openpic_addr, |
| mpic_flags, 0, 0, "PASEMI-OPIC"); |
| BUG_ON(!mpic); |
| |
| mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000); |
| mpic_init(mpic); |
| /* The NMI/MCK source needs to be prio 15 */ |
| if (nmiprop) { |
| nmi_virq = irq_create_mapping(NULL, *nmiprop); |
| mpic_irq_set_priority(nmi_virq, 15); |
| irq_set_irq_type(nmi_virq, IRQ_TYPE_EDGE_RISING); |
| mpic_unmask_irq(irq_get_irq_data(nmi_virq)); |
| } |
| |
| nemo_init_IRQ(mpic); |
| |
| of_node_put(mpic_node); |
| of_node_put(root); |
| } |
| |
| static void __init pas_progress(char *s, unsigned short hex) |
| { |
| printk("[%04x] : %s\n", hex, s ? s : ""); |
| } |
| |
| |
| static int pas_machine_check_handler(struct pt_regs *regs) |
| { |
| int cpu = smp_processor_id(); |
| unsigned long srr0, srr1, dsisr; |
| int dump_slb = 0; |
| int i; |
| |
| srr0 = regs->nip; |
| srr1 = regs->msr; |
| |
| if (nmi_virq && mpic_get_mcirq() == nmi_virq) { |
| pr_err("NMI delivered\n"); |
| debugger(regs); |
| mpic_end_irq(irq_get_irq_data(nmi_virq)); |
| goto out; |
| } |
| |
| dsisr = mfspr(SPRN_DSISR); |
| pr_err("Machine Check on CPU %d\n", cpu); |
| pr_err("SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1); |
| pr_err("DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar); |
| pr_err("BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER), |
| mfspr(SPRN_PA6T_MER)); |
| pr_err("IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER), |
| mfspr(SPRN_PA6T_DER)); |
| pr_err("Cause:\n"); |
| |
| if (srr1 & 0x200000) |
| pr_err("Signalled by SDC\n"); |
| |
| if (srr1 & 0x100000) { |
| pr_err("Load/Store detected error:\n"); |
| if (dsisr & 0x8000) |
| pr_err("D-cache ECC double-bit error or bus error\n"); |
| if (dsisr & 0x4000) |
| pr_err("LSU snoop response error\n"); |
| if (dsisr & 0x2000) { |
| pr_err("MMU SLB multi-hit or invalid B field\n"); |
| dump_slb = 1; |
| } |
| if (dsisr & 0x1000) |
| pr_err("Recoverable Duptags\n"); |
| if (dsisr & 0x800) |
| pr_err("Recoverable D-cache parity error count overflow\n"); |
| if (dsisr & 0x400) |
| pr_err("TLB parity error count overflow\n"); |
| } |
| |
| if (srr1 & 0x80000) |
| pr_err("Bus Error\n"); |
| |
| if (srr1 & 0x40000) { |
| pr_err("I-side SLB multiple hit\n"); |
| dump_slb = 1; |
| } |
| |
| if (srr1 & 0x20000) |
| pr_err("I-cache parity error hit\n"); |
| |
| if (num_mce_regs == 0) |
| pr_err("No MCE registers mapped yet, can't dump\n"); |
| else |
| pr_err("SoC debug registers:\n"); |
| |
| for (i = 0; i < num_mce_regs; i++) |
| pr_err("%s: 0x%08x\n", mce_regs[i].name, |
| in_le32(mce_regs[i].addr)); |
| |
| if (dump_slb) { |
| unsigned long e, v; |
| int i; |
| |
| pr_err("slb contents:\n"); |
| for (i = 0; i < mmu_slb_size; i++) { |
| asm volatile("slbmfee %0,%1" : "=r" (e) : "r" (i)); |
| asm volatile("slbmfev %0,%1" : "=r" (v) : "r" (i)); |
| pr_err("%02d %016lx %016lx\n", i, e, v); |
| } |
| } |
| |
| out: |
| /* SRR1[62] is from MSR[62] if recoverable, so pass that back */ |
| return !!(srr1 & 0x2); |
| } |
| |
| static const struct of_device_id pasemi_bus_ids[] = { |
| /* Unfortunately needed for legacy firmwares */ |
| { .type = "localbus", }, |
| { .type = "sdc", }, |
| /* These are the proper entries, which newer firmware uses */ |
| { .compatible = "pasemi,localbus", }, |
| { .compatible = "pasemi,sdc", }, |
| {}, |
| }; |
| |
| static int __init pasemi_publish_devices(void) |
| { |
| /* Publish OF platform devices for SDC and other non-PCI devices */ |
| of_platform_bus_probe(NULL, pasemi_bus_ids, NULL); |
| |
| nemo_init_rtc(); |
| |
| return 0; |
| } |
| machine_device_initcall(pasemi, pasemi_publish_devices); |
| |
| |
| /* |
| * Called very early, MMU is off, device-tree isn't unflattened |
| */ |
| static int __init pas_probe(void) |
| { |
| if (!of_machine_is_compatible("PA6T-1682M") && |
| !of_machine_is_compatible("pasemi,pwrficient")) |
| return 0; |
| |
| #ifdef CONFIG_PPC_PASEMI_NEMO |
| /* |
| * Check for the Nemo motherboard here, if we are running on one |
| * change the machine definition to fit |
| */ |
| if (of_machine_is_compatible("pasemi,nemo")) { |
| pm_power_off = pas_shutdown; |
| ppc_md.name = "A-EON Amigaone X1000"; |
| } |
| #endif |
| |
| iommu_init_early_pasemi(); |
| |
| return 1; |
| } |
| |
| define_machine(pasemi) { |
| .name = "PA Semi PWRficient", |
| .probe = pas_probe, |
| .setup_arch = pas_setup_arch, |
| .discover_phbs = pas_pci_init, |
| .init_IRQ = pas_init_IRQ, |
| .get_irq = mpic_get_irq, |
| .restart = pas_restart, |
| .get_boot_time = pas_get_boot_time, |
| .progress = pas_progress, |
| .machine_check_exception = pas_machine_check_handler, |
| }; |