| // SPDX-License-Identifier: GPL-2.0 |
| |
| /* |
| * Copyright 2016-2021 HabanaLabs, Ltd. |
| * All Rights Reserved. |
| * |
| */ |
| |
| #define pr_fmt(fmt) "habanalabs: " fmt |
| |
| #include "habanalabs.h" |
| #include "../include/hw_ip/pci/pci_general.h" |
| |
| #include <linux/pci.h> |
| #include <linux/module.h> |
| #include <linux/vmalloc.h> |
| #include <linux/version.h> |
| |
| #include <drm/drm_accel.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_ioctl.h> |
| |
| #define CREATE_TRACE_POINTS |
| #include <trace/events/habanalabs.h> |
| |
| #define HL_DRIVER_AUTHOR "HabanaLabs Kernel Driver Team" |
| |
| #define HL_DRIVER_DESC "Driver for HabanaLabs's AI Accelerators" |
| |
| MODULE_AUTHOR(HL_DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(HL_DRIVER_DESC); |
| MODULE_LICENSE("GPL v2"); |
| |
| static int hl_major; |
| static DEFINE_IDR(hl_devs_idr); |
| static DEFINE_MUTEX(hl_devs_idr_lock); |
| |
| #define HL_DEFAULT_TIMEOUT_LOCKED 30 /* 30 seconds */ |
| #define GAUDI_DEFAULT_TIMEOUT_LOCKED 600 /* 10 minutes */ |
| |
| static int timeout_locked = HL_DEFAULT_TIMEOUT_LOCKED; |
| static int reset_on_lockup = 1; |
| static int memory_scrub; |
| static ulong boot_error_status_mask = ULONG_MAX; |
| |
| module_param(timeout_locked, int, 0444); |
| MODULE_PARM_DESC(timeout_locked, |
| "Device lockup timeout in seconds (0 = disabled, default 30s)"); |
| |
| module_param(reset_on_lockup, int, 0444); |
| MODULE_PARM_DESC(reset_on_lockup, |
| "Do device reset on lockup (0 = no, 1 = yes, default yes)"); |
| |
| module_param(memory_scrub, int, 0444); |
| MODULE_PARM_DESC(memory_scrub, |
| "Scrub device memory in various states (0 = no, 1 = yes, default no)"); |
| |
| module_param(boot_error_status_mask, ulong, 0444); |
| MODULE_PARM_DESC(boot_error_status_mask, |
| "Mask of the error status during device CPU boot (If bitX is cleared then error X is masked. Default all 1's)"); |
| |
| #define PCI_IDS_GOYA 0x0001 |
| #define PCI_IDS_GAUDI 0x1000 |
| #define PCI_IDS_GAUDI_SEC 0x1010 |
| |
| #define PCI_IDS_GAUDI2 0x1020 |
| |
| static const struct pci_device_id ids[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GOYA), }, |
| { PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GAUDI), }, |
| { PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GAUDI_SEC), }, |
| { PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GAUDI2), }, |
| { 0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, ids); |
| |
| static const struct drm_ioctl_desc hl_drm_ioctls[] = { |
| DRM_IOCTL_DEF_DRV(HL_INFO, hl_info_ioctl, 0), |
| DRM_IOCTL_DEF_DRV(HL_CB, hl_cb_ioctl, 0), |
| DRM_IOCTL_DEF_DRV(HL_CS, hl_cs_ioctl, 0), |
| DRM_IOCTL_DEF_DRV(HL_WAIT_CS, hl_wait_ioctl, 0), |
| DRM_IOCTL_DEF_DRV(HL_MEMORY, hl_mem_ioctl, 0), |
| DRM_IOCTL_DEF_DRV(HL_DEBUG, hl_debug_ioctl, 0), |
| }; |
| |
| static const struct file_operations hl_fops = { |
| .owner = THIS_MODULE, |
| .open = accel_open, |
| .release = drm_release, |
| .unlocked_ioctl = drm_ioctl, |
| .compat_ioctl = drm_compat_ioctl, |
| .llseek = noop_llseek, |
| .mmap = hl_mmap |
| }; |
| |
| static const struct drm_driver hl_driver = { |
| .driver_features = DRIVER_COMPUTE_ACCEL, |
| |
| .name = HL_NAME, |
| .desc = HL_DRIVER_DESC, |
| .major = LINUX_VERSION_MAJOR, |
| .minor = LINUX_VERSION_PATCHLEVEL, |
| .patchlevel = LINUX_VERSION_SUBLEVEL, |
| .date = "20190505", |
| |
| .fops = &hl_fops, |
| .open = hl_device_open, |
| .postclose = hl_device_release, |
| .ioctls = hl_drm_ioctls, |
| .num_ioctls = ARRAY_SIZE(hl_drm_ioctls) |
| }; |
| |
| /* |
| * get_asic_type - translate device id to asic type |
| * |
| * @hdev: pointer to habanalabs device structure. |
| * |
| * Translate device id and revision id to asic type. |
| * In case of unidentified device, return -1 |
| */ |
| static enum hl_asic_type get_asic_type(struct hl_device *hdev) |
| { |
| struct pci_dev *pdev = hdev->pdev; |
| enum hl_asic_type asic_type = ASIC_INVALID; |
| |
| switch (pdev->device) { |
| case PCI_IDS_GOYA: |
| asic_type = ASIC_GOYA; |
| break; |
| case PCI_IDS_GAUDI: |
| asic_type = ASIC_GAUDI; |
| break; |
| case PCI_IDS_GAUDI_SEC: |
| asic_type = ASIC_GAUDI_SEC; |
| break; |
| case PCI_IDS_GAUDI2: |
| switch (pdev->revision) { |
| case REV_ID_A: |
| asic_type = ASIC_GAUDI2; |
| break; |
| case REV_ID_B: |
| asic_type = ASIC_GAUDI2B; |
| break; |
| case REV_ID_C: |
| asic_type = ASIC_GAUDI2C; |
| break; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return asic_type; |
| } |
| |
| static bool is_asic_secured(enum hl_asic_type asic_type) |
| { |
| switch (asic_type) { |
| case ASIC_GAUDI_SEC: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| /* |
| * hl_device_open() - open function for habanalabs device. |
| * @ddev: pointer to DRM device structure. |
| * @file: pointer to DRM file private data structure. |
| * |
| * Called when process opens an habanalabs device. |
| */ |
| int hl_device_open(struct drm_device *ddev, struct drm_file *file_priv) |
| { |
| struct hl_device *hdev = to_hl_device(ddev); |
| enum hl_device_status status; |
| struct hl_fpriv *hpriv; |
| int rc; |
| |
| hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); |
| if (!hpriv) |
| return -ENOMEM; |
| |
| hpriv->hdev = hdev; |
| mutex_init(&hpriv->notifier_event.lock); |
| mutex_init(&hpriv->restore_phase_mutex); |
| mutex_init(&hpriv->ctx_lock); |
| kref_init(&hpriv->refcount); |
| |
| hl_ctx_mgr_init(&hpriv->ctx_mgr); |
| hl_mem_mgr_init(hpriv->hdev->dev, &hpriv->mem_mgr); |
| |
| hpriv->taskpid = get_task_pid(current, PIDTYPE_PID); |
| |
| mutex_lock(&hdev->fpriv_list_lock); |
| |
| if (!hl_device_operational(hdev, &status)) { |
| dev_dbg_ratelimited(hdev->dev, |
| "Can't open %s because it is %s\n", |
| dev_name(hdev->dev), hdev->status[status]); |
| |
| if (status == HL_DEVICE_STATUS_IN_RESET || |
| status == HL_DEVICE_STATUS_IN_RESET_AFTER_DEVICE_RELEASE) |
| rc = -EAGAIN; |
| else |
| rc = -EPERM; |
| |
| goto out_err; |
| } |
| |
| if (hdev->is_in_dram_scrub) { |
| dev_dbg_ratelimited(hdev->dev, |
| "Can't open %s during dram scrub\n", |
| dev_name(hdev->dev)); |
| rc = -EAGAIN; |
| goto out_err; |
| } |
| |
| if (hdev->compute_ctx_in_release) { |
| dev_dbg_ratelimited(hdev->dev, |
| "Can't open %s because another user is still releasing it\n", |
| dev_name(hdev->dev)); |
| rc = -EAGAIN; |
| goto out_err; |
| } |
| |
| if (hdev->is_compute_ctx_active) { |
| dev_dbg_ratelimited(hdev->dev, |
| "Can't open %s because another user is working on it\n", |
| dev_name(hdev->dev)); |
| rc = -EBUSY; |
| goto out_err; |
| } |
| |
| rc = hl_ctx_create(hdev, hpriv); |
| if (rc) { |
| dev_err(hdev->dev, "Failed to create context %d\n", rc); |
| goto out_err; |
| } |
| |
| list_add(&hpriv->dev_node, &hdev->fpriv_list); |
| mutex_unlock(&hdev->fpriv_list_lock); |
| |
| hdev->asic_funcs->send_device_activity(hdev, true); |
| |
| hl_debugfs_add_file(hpriv); |
| |
| hl_enable_err_info_capture(&hdev->captured_err_info); |
| |
| hdev->open_counter++; |
| hdev->last_successful_open_jif = jiffies; |
| hdev->last_successful_open_ktime = ktime_get(); |
| |
| file_priv->driver_priv = hpriv; |
| hpriv->file_priv = file_priv; |
| |
| return 0; |
| |
| out_err: |
| mutex_unlock(&hdev->fpriv_list_lock); |
| hl_mem_mgr_fini(&hpriv->mem_mgr); |
| hl_mem_mgr_idr_destroy(&hpriv->mem_mgr); |
| hl_ctx_mgr_fini(hpriv->hdev, &hpriv->ctx_mgr); |
| mutex_destroy(&hpriv->ctx_lock); |
| mutex_destroy(&hpriv->restore_phase_mutex); |
| mutex_destroy(&hpriv->notifier_event.lock); |
| put_pid(hpriv->taskpid); |
| |
| kfree(hpriv); |
| |
| return rc; |
| } |
| |
| int hl_device_open_ctrl(struct inode *inode, struct file *filp) |
| { |
| struct hl_device *hdev; |
| struct hl_fpriv *hpriv; |
| int rc; |
| |
| mutex_lock(&hl_devs_idr_lock); |
| hdev = idr_find(&hl_devs_idr, iminor(inode)); |
| mutex_unlock(&hl_devs_idr_lock); |
| |
| if (!hdev) { |
| pr_err("Couldn't find device %d:%d\n", |
| imajor(inode), iminor(inode)); |
| return -ENXIO; |
| } |
| |
| hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); |
| if (!hpriv) |
| return -ENOMEM; |
| |
| /* Prevent other routines from reading partial hpriv data by |
| * initializing hpriv fields before inserting it to the list |
| */ |
| hpriv->hdev = hdev; |
| filp->private_data = hpriv; |
| |
| nonseekable_open(inode, filp); |
| |
| hpriv->taskpid = get_task_pid(current, PIDTYPE_PID); |
| |
| mutex_lock(&hdev->fpriv_ctrl_list_lock); |
| |
| if (!hl_ctrl_device_operational(hdev, NULL)) { |
| dev_dbg_ratelimited(hdev->dev_ctrl, |
| "Can't open %s because it is disabled\n", |
| dev_name(hdev->dev_ctrl)); |
| rc = -EPERM; |
| goto out_err; |
| } |
| |
| list_add(&hpriv->dev_node, &hdev->fpriv_ctrl_list); |
| mutex_unlock(&hdev->fpriv_ctrl_list_lock); |
| |
| return 0; |
| |
| out_err: |
| mutex_unlock(&hdev->fpriv_ctrl_list_lock); |
| filp->private_data = NULL; |
| put_pid(hpriv->taskpid); |
| |
| kfree(hpriv); |
| |
| return rc; |
| } |
| |
| static void set_driver_behavior_per_device(struct hl_device *hdev) |
| { |
| hdev->nic_ports_mask = 0; |
| hdev->fw_components = FW_TYPE_ALL_TYPES; |
| hdev->cpu_queues_enable = 1; |
| hdev->pldm = 0; |
| hdev->hard_reset_on_fw_events = 1; |
| hdev->bmc_enable = 1; |
| hdev->reset_on_preboot_fail = 1; |
| hdev->heartbeat = 1; |
| } |
| |
| static void copy_kernel_module_params_to_device(struct hl_device *hdev) |
| { |
| hdev->asic_prop.fw_security_enabled = is_asic_secured(hdev->asic_type); |
| |
| hdev->major = hl_major; |
| hdev->memory_scrub = memory_scrub; |
| hdev->reset_on_lockup = reset_on_lockup; |
| hdev->boot_error_status_mask = boot_error_status_mask; |
| } |
| |
| static void fixup_device_params_per_asic(struct hl_device *hdev, int timeout) |
| { |
| switch (hdev->asic_type) { |
| case ASIC_GAUDI: |
| case ASIC_GAUDI_SEC: |
| /* If user didn't request a different timeout than the default one, we have |
| * a different default timeout for Gaudi |
| */ |
| if (timeout == HL_DEFAULT_TIMEOUT_LOCKED) |
| hdev->timeout_jiffies = msecs_to_jiffies(GAUDI_DEFAULT_TIMEOUT_LOCKED * |
| MSEC_PER_SEC); |
| |
| hdev->reset_upon_device_release = 0; |
| break; |
| |
| case ASIC_GOYA: |
| hdev->reset_upon_device_release = 0; |
| break; |
| |
| default: |
| hdev->reset_upon_device_release = 1; |
| break; |
| } |
| } |
| |
| static int fixup_device_params(struct hl_device *hdev) |
| { |
| int tmp_timeout; |
| |
| tmp_timeout = timeout_locked; |
| |
| hdev->fw_poll_interval_usec = HL_FW_STATUS_POLL_INTERVAL_USEC; |
| hdev->fw_comms_poll_interval_usec = HL_FW_STATUS_POLL_INTERVAL_USEC; |
| |
| if (tmp_timeout) |
| hdev->timeout_jiffies = msecs_to_jiffies(tmp_timeout * MSEC_PER_SEC); |
| else |
| hdev->timeout_jiffies = MAX_SCHEDULE_TIMEOUT; |
| |
| hdev->stop_on_err = true; |
| hdev->reset_info.curr_reset_cause = HL_RESET_CAUSE_UNKNOWN; |
| hdev->reset_info.prev_reset_trigger = HL_RESET_TRIGGER_DEFAULT; |
| |
| /* Enable only after the initialization of the device */ |
| hdev->disabled = true; |
| |
| if (!(hdev->fw_components & FW_TYPE_PREBOOT_CPU) && |
| (hdev->fw_components & ~FW_TYPE_PREBOOT_CPU)) { |
| pr_err("Preboot must be set along with other components"); |
| return -EINVAL; |
| } |
| |
| /* If CPU queues not enabled, no way to do heartbeat */ |
| if (!hdev->cpu_queues_enable) |
| hdev->heartbeat = 0; |
| fixup_device_params_per_asic(hdev, tmp_timeout); |
| |
| return 0; |
| } |
| |
| static int allocate_device_id(struct hl_device *hdev) |
| { |
| int id; |
| |
| mutex_lock(&hl_devs_idr_lock); |
| id = idr_alloc(&hl_devs_idr, hdev, 0, HL_MAX_MINORS, GFP_KERNEL); |
| mutex_unlock(&hl_devs_idr_lock); |
| |
| if (id < 0) { |
| if (id == -ENOSPC) |
| pr_err("too many devices in the system\n"); |
| return -EBUSY; |
| } |
| |
| hdev->id = id; |
| |
| /* |
| * Firstly initialized with the internal device ID. |
| * Will be updated later after the DRM device registration to hold the minor ID. |
| */ |
| hdev->cdev_idx = hdev->id; |
| |
| return 0; |
| } |
| |
| /** |
| * create_hdev - create habanalabs device instance |
| * |
| * @dev: will hold the pointer to the new habanalabs device structure |
| * @pdev: pointer to the pci device |
| * |
| * Allocate memory for habanalabs device and initialize basic fields |
| * Identify the ASIC type |
| * Allocate ID (minor) for the device (only for real devices) |
| */ |
| static int create_hdev(struct hl_device **dev, struct pci_dev *pdev) |
| { |
| struct hl_device *hdev; |
| int rc; |
| |
| *dev = NULL; |
| |
| hdev = devm_drm_dev_alloc(&pdev->dev, &hl_driver, struct hl_device, drm); |
| if (IS_ERR(hdev)) |
| return PTR_ERR(hdev); |
| |
| hdev->dev = hdev->drm.dev; |
| |
| /* Will be NULL in case of simulator device */ |
| hdev->pdev = pdev; |
| |
| /* Assign status description string */ |
| strscpy(hdev->status[HL_DEVICE_STATUS_OPERATIONAL], "operational", HL_STR_MAX); |
| strscpy(hdev->status[HL_DEVICE_STATUS_IN_RESET], "in reset", HL_STR_MAX); |
| strscpy(hdev->status[HL_DEVICE_STATUS_MALFUNCTION], "disabled", HL_STR_MAX); |
| strscpy(hdev->status[HL_DEVICE_STATUS_NEEDS_RESET], "needs reset", HL_STR_MAX); |
| strscpy(hdev->status[HL_DEVICE_STATUS_IN_DEVICE_CREATION], |
| "in device creation", HL_STR_MAX); |
| strscpy(hdev->status[HL_DEVICE_STATUS_IN_RESET_AFTER_DEVICE_RELEASE], |
| "in reset after device release", HL_STR_MAX); |
| |
| |
| /* First, we must find out which ASIC are we handling. This is needed |
| * to configure the behavior of the driver (kernel parameters) |
| */ |
| hdev->asic_type = get_asic_type(hdev); |
| if (hdev->asic_type == ASIC_INVALID) { |
| dev_err(&pdev->dev, "Unsupported ASIC\n"); |
| rc = -ENODEV; |
| goto out_err; |
| } |
| |
| copy_kernel_module_params_to_device(hdev); |
| |
| set_driver_behavior_per_device(hdev); |
| |
| fixup_device_params(hdev); |
| |
| rc = allocate_device_id(hdev); |
| if (rc) |
| goto out_err; |
| |
| *dev = hdev; |
| |
| return 0; |
| |
| out_err: |
| return rc; |
| } |
| |
| /* |
| * destroy_hdev - destroy habanalabs device instance |
| * |
| * @dev: pointer to the habanalabs device structure |
| * |
| */ |
| static void destroy_hdev(struct hl_device *hdev) |
| { |
| /* Remove device from the device list */ |
| mutex_lock(&hl_devs_idr_lock); |
| idr_remove(&hl_devs_idr, hdev->id); |
| mutex_unlock(&hl_devs_idr_lock); |
| |
| } |
| |
| static int hl_pmops_suspend(struct device *dev) |
| { |
| struct hl_device *hdev = dev_get_drvdata(dev); |
| |
| pr_debug("Going to suspend PCI device\n"); |
| |
| if (!hdev) { |
| pr_err("device pointer is NULL in suspend\n"); |
| return 0; |
| } |
| |
| return hl_device_suspend(hdev); |
| } |
| |
| static int hl_pmops_resume(struct device *dev) |
| { |
| struct hl_device *hdev = dev_get_drvdata(dev); |
| |
| pr_debug("Going to resume PCI device\n"); |
| |
| if (!hdev) { |
| pr_err("device pointer is NULL in resume\n"); |
| return 0; |
| } |
| |
| return hl_device_resume(hdev); |
| } |
| |
| /** |
| * hl_pci_probe - probe PCI habanalabs devices |
| * |
| * @pdev: pointer to pci device |
| * @id: pointer to pci device id structure |
| * |
| * Standard PCI probe function for habanalabs device. |
| * Create a new habanalabs device and initialize it according to the |
| * device's type |
| */ |
| static int hl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct hl_device *hdev; |
| int rc; |
| |
| dev_info(&pdev->dev, HL_NAME |
| " device found [%04x:%04x] (rev %x)\n", |
| (int)pdev->vendor, (int)pdev->device, (int)pdev->revision); |
| |
| rc = create_hdev(&hdev, pdev); |
| if (rc) |
| return rc; |
| |
| pci_set_drvdata(pdev, hdev); |
| |
| rc = hl_device_init(hdev); |
| if (rc) { |
| dev_err(&pdev->dev, "Fatal error during habanalabs device init\n"); |
| rc = -ENODEV; |
| goto disable_device; |
| } |
| |
| return 0; |
| |
| disable_device: |
| pci_set_drvdata(pdev, NULL); |
| destroy_hdev(hdev); |
| |
| return rc; |
| } |
| |
| /* |
| * hl_pci_remove - remove PCI habanalabs devices |
| * |
| * @pdev: pointer to pci device |
| * |
| * Standard PCI remove function for habanalabs device |
| */ |
| static void hl_pci_remove(struct pci_dev *pdev) |
| { |
| struct hl_device *hdev; |
| |
| hdev = pci_get_drvdata(pdev); |
| if (!hdev) |
| return; |
| |
| hl_device_fini(hdev); |
| pci_set_drvdata(pdev, NULL); |
| destroy_hdev(hdev); |
| } |
| |
| /** |
| * hl_pci_err_detected - a PCI bus error detected on this device |
| * |
| * @pdev: pointer to pci device |
| * @state: PCI error type |
| * |
| * Called by the PCI subsystem whenever a non-correctable |
| * PCI bus error is detected |
| */ |
| static pci_ers_result_t |
| hl_pci_err_detected(struct pci_dev *pdev, pci_channel_state_t state) |
| { |
| struct hl_device *hdev = pci_get_drvdata(pdev); |
| enum pci_ers_result result; |
| |
| switch (state) { |
| case pci_channel_io_normal: |
| dev_warn(hdev->dev, "PCI normal state error detected\n"); |
| return PCI_ERS_RESULT_CAN_RECOVER; |
| |
| case pci_channel_io_frozen: |
| dev_warn(hdev->dev, "PCI frozen state error detected\n"); |
| result = PCI_ERS_RESULT_NEED_RESET; |
| break; |
| |
| case pci_channel_io_perm_failure: |
| dev_warn(hdev->dev, "PCI failure state error detected\n"); |
| result = PCI_ERS_RESULT_DISCONNECT; |
| break; |
| |
| default: |
| result = PCI_ERS_RESULT_NONE; |
| } |
| |
| hdev->asic_funcs->halt_engines(hdev, true, false); |
| |
| return result; |
| } |
| |
| /** |
| * hl_pci_err_resume - resume after a PCI slot reset |
| * |
| * @pdev: pointer to pci device |
| * |
| */ |
| static void hl_pci_err_resume(struct pci_dev *pdev) |
| { |
| struct hl_device *hdev = pci_get_drvdata(pdev); |
| |
| dev_warn(hdev->dev, "Resuming device after PCI slot reset\n"); |
| hl_device_resume(hdev); |
| } |
| |
| /** |
| * hl_pci_err_slot_reset - a PCI slot reset has just happened |
| * |
| * @pdev: pointer to pci device |
| * |
| * Determine if the driver can recover from the PCI slot reset |
| */ |
| static pci_ers_result_t hl_pci_err_slot_reset(struct pci_dev *pdev) |
| { |
| struct hl_device *hdev = pci_get_drvdata(pdev); |
| |
| dev_warn(hdev->dev, "PCI slot reset detected\n"); |
| |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| static void hl_pci_reset_prepare(struct pci_dev *pdev) |
| { |
| struct hl_device *hdev; |
| |
| hdev = pci_get_drvdata(pdev); |
| if (!hdev) |
| return; |
| |
| hdev->disabled = true; |
| } |
| |
| static void hl_pci_reset_done(struct pci_dev *pdev) |
| { |
| struct hl_device *hdev; |
| u32 flags; |
| |
| hdev = pci_get_drvdata(pdev); |
| if (!hdev) |
| return; |
| |
| /* |
| * Schedule a thread to trigger hard reset. |
| * The reason for this handler, is for rare cases where the driver is up |
| * and FLR occurs. This is valid only when working with no VM, so FW handles FLR |
| * and resets the device. FW will go back preboot stage, so driver needs to perform |
| * hard reset in order to load FW fit again. |
| */ |
| flags = HL_DRV_RESET_HARD | HL_DRV_RESET_BYPASS_REQ_TO_FW; |
| |
| hl_device_reset(hdev, flags); |
| } |
| |
| static const struct dev_pm_ops hl_pm_ops = { |
| .suspend = hl_pmops_suspend, |
| .resume = hl_pmops_resume, |
| }; |
| |
| static const struct pci_error_handlers hl_pci_err_handler = { |
| .error_detected = hl_pci_err_detected, |
| .slot_reset = hl_pci_err_slot_reset, |
| .resume = hl_pci_err_resume, |
| .reset_prepare = hl_pci_reset_prepare, |
| .reset_done = hl_pci_reset_done, |
| }; |
| |
| static struct pci_driver hl_pci_driver = { |
| .name = HL_NAME, |
| .id_table = ids, |
| .probe = hl_pci_probe, |
| .remove = hl_pci_remove, |
| .shutdown = hl_pci_remove, |
| .driver = { |
| .name = HL_NAME, |
| .pm = &hl_pm_ops, |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| .err_handler = &hl_pci_err_handler, |
| }; |
| |
| /* |
| * hl_init - Initialize the habanalabs kernel driver |
| */ |
| static int __init hl_init(void) |
| { |
| int rc; |
| dev_t dev; |
| |
| pr_info("loading driver\n"); |
| |
| rc = alloc_chrdev_region(&dev, 0, HL_MAX_MINORS, HL_NAME); |
| if (rc < 0) { |
| pr_err("unable to get major\n"); |
| return rc; |
| } |
| |
| hl_major = MAJOR(dev); |
| |
| rc = pci_register_driver(&hl_pci_driver); |
| if (rc) { |
| pr_err("failed to register pci device\n"); |
| goto remove_major; |
| } |
| |
| pr_debug("driver loaded\n"); |
| |
| return 0; |
| |
| remove_major: |
| unregister_chrdev_region(MKDEV(hl_major, 0), HL_MAX_MINORS); |
| return rc; |
| } |
| |
| /* |
| * hl_exit - Release all resources of the habanalabs kernel driver |
| */ |
| static void __exit hl_exit(void) |
| { |
| pci_unregister_driver(&hl_pci_driver); |
| |
| unregister_chrdev_region(MKDEV(hl_major, 0), HL_MAX_MINORS); |
| |
| idr_destroy(&hl_devs_idr); |
| |
| pr_debug("driver removed\n"); |
| } |
| |
| module_init(hl_init); |
| module_exit(hl_exit); |