| /* |
| * Freescale MPC85xx Memory Controller kernel module |
| * |
| * Parts Copyrighted (c) 2013 by Freescale Semiconductor, Inc. |
| * |
| * Author: Dave Jiang <djiang@mvista.com> |
| * |
| * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/ctype.h> |
| #include <linux/io.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/edac.h> |
| #include <linux/smp.h> |
| #include <linux/gfp.h> |
| #include <linux/fsl/edac.h> |
| |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include "edac_module.h" |
| #include "mpc85xx_edac.h" |
| #include "fsl_ddr_edac.h" |
| |
| static int edac_dev_idx; |
| #ifdef CONFIG_PCI |
| static int edac_pci_idx; |
| #endif |
| |
| /* |
| * PCI Err defines |
| */ |
| #ifdef CONFIG_PCI |
| static u32 orig_pci_err_cap_dr; |
| static u32 orig_pci_err_en; |
| #endif |
| |
| static u32 orig_l2_err_disable; |
| |
| /**************************** PCI Err device ***************************/ |
| #ifdef CONFIG_PCI |
| |
| static void mpc85xx_pci_check(struct edac_pci_ctl_info *pci) |
| { |
| struct mpc85xx_pci_pdata *pdata = pci->pvt_info; |
| u32 err_detect; |
| |
| err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR); |
| |
| /* master aborts can happen during PCI config cycles */ |
| if (!(err_detect & ~(PCI_EDE_MULTI_ERR | PCI_EDE_MST_ABRT))) { |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect); |
| return; |
| } |
| |
| pr_err("PCI error(s) detected\n"); |
| pr_err("PCI/X ERR_DR register: %#08x\n", err_detect); |
| |
| pr_err("PCI/X ERR_ATTRIB register: %#08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ATTRIB)); |
| pr_err("PCI/X ERR_ADDR register: %#08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR)); |
| pr_err("PCI/X ERR_EXT_ADDR register: %#08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EXT_ADDR)); |
| pr_err("PCI/X ERR_DL register: %#08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DL)); |
| pr_err("PCI/X ERR_DH register: %#08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DH)); |
| |
| /* clear error bits */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect); |
| |
| if (err_detect & PCI_EDE_PERR_MASK) |
| edac_pci_handle_pe(pci, pci->ctl_name); |
| |
| if ((err_detect & ~PCI_EDE_MULTI_ERR) & ~PCI_EDE_PERR_MASK) |
| edac_pci_handle_npe(pci, pci->ctl_name); |
| } |
| |
| static void mpc85xx_pcie_check(struct edac_pci_ctl_info *pci) |
| { |
| struct mpc85xx_pci_pdata *pdata = pci->pvt_info; |
| u32 err_detect, err_cap_stat; |
| |
| err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR); |
| err_cap_stat = in_be32(pdata->pci_vbase + MPC85XX_PCI_GAS_TIMR); |
| |
| pr_err("PCIe error(s) detected\n"); |
| pr_err("PCIe ERR_DR register: 0x%08x\n", err_detect); |
| pr_err("PCIe ERR_CAP_STAT register: 0x%08x\n", err_cap_stat); |
| pr_err("PCIe ERR_CAP_R0 register: 0x%08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R0)); |
| pr_err("PCIe ERR_CAP_R1 register: 0x%08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R1)); |
| pr_err("PCIe ERR_CAP_R2 register: 0x%08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R2)); |
| pr_err("PCIe ERR_CAP_R3 register: 0x%08x\n", |
| in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R3)); |
| |
| /* clear error bits */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect); |
| |
| /* reset error capture */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_GAS_TIMR, err_cap_stat | 0x1); |
| } |
| |
| static int mpc85xx_pcie_find_capability(struct device_node *np) |
| { |
| struct pci_controller *hose; |
| |
| if (!np) |
| return -EINVAL; |
| |
| hose = pci_find_hose_for_OF_device(np); |
| |
| return early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP); |
| } |
| |
| static irqreturn_t mpc85xx_pci_isr(int irq, void *dev_id) |
| { |
| struct edac_pci_ctl_info *pci = dev_id; |
| struct mpc85xx_pci_pdata *pdata = pci->pvt_info; |
| u32 err_detect; |
| |
| err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR); |
| |
| if (!err_detect) |
| return IRQ_NONE; |
| |
| if (pdata->is_pcie) |
| mpc85xx_pcie_check(pci); |
| else |
| mpc85xx_pci_check(pci); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int mpc85xx_pci_err_probe(struct platform_device *op) |
| { |
| struct edac_pci_ctl_info *pci; |
| struct mpc85xx_pci_pdata *pdata; |
| struct mpc85xx_edac_pci_plat_data *plat_data; |
| struct device_node *of_node; |
| struct resource r; |
| int res = 0; |
| |
| if (!devres_open_group(&op->dev, mpc85xx_pci_err_probe, GFP_KERNEL)) |
| return -ENOMEM; |
| |
| pci = edac_pci_alloc_ctl_info(sizeof(*pdata), "mpc85xx_pci_err"); |
| if (!pci) |
| return -ENOMEM; |
| |
| /* make sure error reporting method is sane */ |
| switch (edac_op_state) { |
| case EDAC_OPSTATE_POLL: |
| case EDAC_OPSTATE_INT: |
| break; |
| default: |
| edac_op_state = EDAC_OPSTATE_INT; |
| break; |
| } |
| |
| pdata = pci->pvt_info; |
| pdata->name = "mpc85xx_pci_err"; |
| |
| plat_data = op->dev.platform_data; |
| if (!plat_data) { |
| dev_err(&op->dev, "no platform data"); |
| res = -ENXIO; |
| goto err; |
| } |
| of_node = plat_data->of_node; |
| |
| if (mpc85xx_pcie_find_capability(of_node) > 0) |
| pdata->is_pcie = true; |
| |
| dev_set_drvdata(&op->dev, pci); |
| pci->dev = &op->dev; |
| pci->mod_name = EDAC_MOD_STR; |
| pci->ctl_name = pdata->name; |
| pci->dev_name = dev_name(&op->dev); |
| |
| if (edac_op_state == EDAC_OPSTATE_POLL) { |
| if (pdata->is_pcie) |
| pci->edac_check = mpc85xx_pcie_check; |
| else |
| pci->edac_check = mpc85xx_pci_check; |
| } |
| |
| pdata->edac_idx = edac_pci_idx++; |
| |
| res = of_address_to_resource(of_node, 0, &r); |
| if (res) { |
| pr_err("%s: Unable to get resource for PCI err regs\n", __func__); |
| goto err; |
| } |
| |
| /* we only need the error registers */ |
| r.start += 0xe00; |
| |
| if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r), |
| pdata->name)) { |
| pr_err("%s: Error while requesting mem region\n", __func__); |
| res = -EBUSY; |
| goto err; |
| } |
| |
| pdata->pci_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r)); |
| if (!pdata->pci_vbase) { |
| pr_err("%s: Unable to setup PCI err regs\n", __func__); |
| res = -ENOMEM; |
| goto err; |
| } |
| |
| if (pdata->is_pcie) { |
| orig_pci_err_cap_dr = |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR); |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR, ~0); |
| orig_pci_err_en = |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN); |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, 0); |
| } else { |
| orig_pci_err_cap_dr = |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR); |
| |
| /* PCI master abort is expected during config cycles */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR, 0x40); |
| |
| orig_pci_err_en = |
| in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN); |
| |
| /* disable master abort reporting */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, ~0x40); |
| } |
| |
| /* clear error bits */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, ~0); |
| |
| /* reset error capture */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_GAS_TIMR, 0x1); |
| |
| if (edac_pci_add_device(pci, pdata->edac_idx) > 0) { |
| edac_dbg(3, "failed edac_pci_add_device()\n"); |
| goto err; |
| } |
| |
| if (edac_op_state == EDAC_OPSTATE_INT) { |
| pdata->irq = irq_of_parse_and_map(of_node, 0); |
| res = devm_request_irq(&op->dev, pdata->irq, |
| mpc85xx_pci_isr, |
| IRQF_SHARED, |
| "[EDAC] PCI err", pci); |
| if (res < 0) { |
| pr_err("%s: Unable to request irq %d for MPC85xx PCI err\n", |
| __func__, pdata->irq); |
| irq_dispose_mapping(pdata->irq); |
| res = -ENODEV; |
| goto err2; |
| } |
| |
| pr_info(EDAC_MOD_STR " acquired irq %d for PCI Err\n", |
| pdata->irq); |
| } |
| |
| if (pdata->is_pcie) { |
| /* |
| * Enable all PCIe error interrupt & error detect except invalid |
| * PEX_CONFIG_ADDR/PEX_CONFIG_DATA access interrupt generation |
| * enable bit and invalid PEX_CONFIG_ADDR/PEX_CONFIG_DATA access |
| * detection enable bit. Because PCIe bus code to initialize and |
| * configure these PCIe devices on booting will use some invalid |
| * PEX_CONFIG_ADDR/PEX_CONFIG_DATA, edac driver prints the much |
| * notice information. So disable this detect to fix ugly print. |
| */ |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, ~0 |
| & ~PEX_ERR_ICCAIE_EN_BIT); |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR, 0 |
| | PEX_ERR_ICCAD_DISR_BIT); |
| } |
| |
| devres_remove_group(&op->dev, mpc85xx_pci_err_probe); |
| edac_dbg(3, "success\n"); |
| pr_info(EDAC_MOD_STR " PCI err registered\n"); |
| |
| return 0; |
| |
| err2: |
| edac_pci_del_device(&op->dev); |
| err: |
| edac_pci_free_ctl_info(pci); |
| devres_release_group(&op->dev, mpc85xx_pci_err_probe); |
| return res; |
| } |
| |
| static void mpc85xx_pci_err_remove(struct platform_device *op) |
| { |
| struct edac_pci_ctl_info *pci = dev_get_drvdata(&op->dev); |
| struct mpc85xx_pci_pdata *pdata = pci->pvt_info; |
| |
| edac_dbg(0, "\n"); |
| |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR, orig_pci_err_cap_dr); |
| out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, orig_pci_err_en); |
| |
| edac_pci_del_device(&op->dev); |
| edac_pci_free_ctl_info(pci); |
| } |
| |
| static const struct platform_device_id mpc85xx_pci_err_match[] = { |
| { |
| .name = "mpc85xx-pci-edac" |
| }, |
| {} |
| }; |
| |
| static struct platform_driver mpc85xx_pci_err_driver = { |
| .probe = mpc85xx_pci_err_probe, |
| .remove_new = mpc85xx_pci_err_remove, |
| .id_table = mpc85xx_pci_err_match, |
| .driver = { |
| .name = "mpc85xx_pci_err", |
| .suppress_bind_attrs = true, |
| }, |
| }; |
| #endif /* CONFIG_PCI */ |
| |
| /**************************** L2 Err device ***************************/ |
| |
| /************************ L2 SYSFS parts ***********************************/ |
| |
| static ssize_t mpc85xx_l2_inject_data_hi_show(struct edac_device_ctl_info |
| *edac_dev, char *data) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| return sprintf(data, "0x%08x", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJHI)); |
| } |
| |
| static ssize_t mpc85xx_l2_inject_data_lo_show(struct edac_device_ctl_info |
| *edac_dev, char *data) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| return sprintf(data, "0x%08x", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJLO)); |
| } |
| |
| static ssize_t mpc85xx_l2_inject_ctrl_show(struct edac_device_ctl_info |
| *edac_dev, char *data) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| return sprintf(data, "0x%08x", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJCTL)); |
| } |
| |
| static ssize_t mpc85xx_l2_inject_data_hi_store(struct edac_device_ctl_info |
| *edac_dev, const char *data, |
| size_t count) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| if (isdigit(*data)) { |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJHI, |
| simple_strtoul(data, NULL, 0)); |
| return count; |
| } |
| return 0; |
| } |
| |
| static ssize_t mpc85xx_l2_inject_data_lo_store(struct edac_device_ctl_info |
| *edac_dev, const char *data, |
| size_t count) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| if (isdigit(*data)) { |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJLO, |
| simple_strtoul(data, NULL, 0)); |
| return count; |
| } |
| return 0; |
| } |
| |
| static ssize_t mpc85xx_l2_inject_ctrl_store(struct edac_device_ctl_info |
| *edac_dev, const char *data, |
| size_t count) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| if (isdigit(*data)) { |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJCTL, |
| simple_strtoul(data, NULL, 0)); |
| return count; |
| } |
| return 0; |
| } |
| |
| static struct edac_dev_sysfs_attribute mpc85xx_l2_sysfs_attributes[] = { |
| { |
| .attr = { |
| .name = "inject_data_hi", |
| .mode = (S_IRUGO | S_IWUSR) |
| }, |
| .show = mpc85xx_l2_inject_data_hi_show, |
| .store = mpc85xx_l2_inject_data_hi_store}, |
| { |
| .attr = { |
| .name = "inject_data_lo", |
| .mode = (S_IRUGO | S_IWUSR) |
| }, |
| .show = mpc85xx_l2_inject_data_lo_show, |
| .store = mpc85xx_l2_inject_data_lo_store}, |
| { |
| .attr = { |
| .name = "inject_ctrl", |
| .mode = (S_IRUGO | S_IWUSR) |
| }, |
| .show = mpc85xx_l2_inject_ctrl_show, |
| .store = mpc85xx_l2_inject_ctrl_store}, |
| |
| /* End of list */ |
| { |
| .attr = {.name = NULL} |
| } |
| }; |
| |
| static void mpc85xx_set_l2_sysfs_attributes(struct edac_device_ctl_info |
| *edac_dev) |
| { |
| edac_dev->sysfs_attributes = mpc85xx_l2_sysfs_attributes; |
| } |
| |
| /***************************** L2 ops ***********************************/ |
| |
| static void mpc85xx_l2_check(struct edac_device_ctl_info *edac_dev) |
| { |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| u32 err_detect; |
| |
| err_detect = in_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET); |
| |
| if (!(err_detect & L2_EDE_MASK)) |
| return; |
| |
| pr_err("ECC Error in CPU L2 cache\n"); |
| pr_err("L2 Error Detect Register: 0x%08x\n", err_detect); |
| pr_err("L2 Error Capture Data High Register: 0x%08x\n", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_CAPTDATAHI)); |
| pr_err("L2 Error Capture Data Lo Register: 0x%08x\n", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_CAPTDATALO)); |
| pr_err("L2 Error Syndrome Register: 0x%08x\n", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_CAPTECC)); |
| pr_err("L2 Error Attributes Capture Register: 0x%08x\n", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_ERRATTR)); |
| pr_err("L2 Error Address Capture Register: 0x%08x\n", |
| in_be32(pdata->l2_vbase + MPC85XX_L2_ERRADDR)); |
| |
| /* clear error detect register */ |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET, err_detect); |
| |
| if (err_detect & L2_EDE_CE_MASK) |
| edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); |
| |
| if (err_detect & L2_EDE_UE_MASK) |
| edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); |
| } |
| |
| static irqreturn_t mpc85xx_l2_isr(int irq, void *dev_id) |
| { |
| struct edac_device_ctl_info *edac_dev = dev_id; |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| u32 err_detect; |
| |
| err_detect = in_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET); |
| |
| if (!(err_detect & L2_EDE_MASK)) |
| return IRQ_NONE; |
| |
| mpc85xx_l2_check(edac_dev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int mpc85xx_l2_err_probe(struct platform_device *op) |
| { |
| struct edac_device_ctl_info *edac_dev; |
| struct mpc85xx_l2_pdata *pdata; |
| struct resource r; |
| int res; |
| |
| if (!devres_open_group(&op->dev, mpc85xx_l2_err_probe, GFP_KERNEL)) |
| return -ENOMEM; |
| |
| edac_dev = edac_device_alloc_ctl_info(sizeof(*pdata), |
| "cpu", 1, "L", 1, 2, NULL, 0, |
| edac_dev_idx); |
| if (!edac_dev) { |
| devres_release_group(&op->dev, mpc85xx_l2_err_probe); |
| return -ENOMEM; |
| } |
| |
| pdata = edac_dev->pvt_info; |
| pdata->name = "mpc85xx_l2_err"; |
| edac_dev->dev = &op->dev; |
| dev_set_drvdata(edac_dev->dev, edac_dev); |
| edac_dev->ctl_name = pdata->name; |
| edac_dev->dev_name = pdata->name; |
| |
| res = of_address_to_resource(op->dev.of_node, 0, &r); |
| if (res) { |
| pr_err("%s: Unable to get resource for L2 err regs\n", __func__); |
| goto err; |
| } |
| |
| /* we only need the error registers */ |
| r.start += 0xe00; |
| |
| if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r), |
| pdata->name)) { |
| pr_err("%s: Error while requesting mem region\n", __func__); |
| res = -EBUSY; |
| goto err; |
| } |
| |
| pdata->l2_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r)); |
| if (!pdata->l2_vbase) { |
| pr_err("%s: Unable to setup L2 err regs\n", __func__); |
| res = -ENOMEM; |
| goto err; |
| } |
| |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET, ~0); |
| |
| orig_l2_err_disable = in_be32(pdata->l2_vbase + MPC85XX_L2_ERRDIS); |
| |
| /* clear the err_dis */ |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDIS, 0); |
| |
| edac_dev->mod_name = EDAC_MOD_STR; |
| |
| if (edac_op_state == EDAC_OPSTATE_POLL) |
| edac_dev->edac_check = mpc85xx_l2_check; |
| |
| mpc85xx_set_l2_sysfs_attributes(edac_dev); |
| |
| pdata->edac_idx = edac_dev_idx++; |
| |
| if (edac_device_add_device(edac_dev) > 0) { |
| edac_dbg(3, "failed edac_device_add_device()\n"); |
| goto err; |
| } |
| |
| if (edac_op_state == EDAC_OPSTATE_INT) { |
| pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0); |
| res = devm_request_irq(&op->dev, pdata->irq, |
| mpc85xx_l2_isr, IRQF_SHARED, |
| "[EDAC] L2 err", edac_dev); |
| if (res < 0) { |
| pr_err("%s: Unable to request irq %d for MPC85xx L2 err\n", |
| __func__, pdata->irq); |
| irq_dispose_mapping(pdata->irq); |
| res = -ENODEV; |
| goto err2; |
| } |
| |
| pr_info(EDAC_MOD_STR " acquired irq %d for L2 Err\n", pdata->irq); |
| |
| edac_dev->op_state = OP_RUNNING_INTERRUPT; |
| |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINTEN, L2_EIE_MASK); |
| } |
| |
| devres_remove_group(&op->dev, mpc85xx_l2_err_probe); |
| |
| edac_dbg(3, "success\n"); |
| pr_info(EDAC_MOD_STR " L2 err registered\n"); |
| |
| return 0; |
| |
| err2: |
| edac_device_del_device(&op->dev); |
| err: |
| devres_release_group(&op->dev, mpc85xx_l2_err_probe); |
| edac_device_free_ctl_info(edac_dev); |
| return res; |
| } |
| |
| static void mpc85xx_l2_err_remove(struct platform_device *op) |
| { |
| struct edac_device_ctl_info *edac_dev = dev_get_drvdata(&op->dev); |
| struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; |
| |
| edac_dbg(0, "\n"); |
| |
| if (edac_op_state == EDAC_OPSTATE_INT) { |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINTEN, 0); |
| irq_dispose_mapping(pdata->irq); |
| } |
| |
| out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDIS, orig_l2_err_disable); |
| edac_device_del_device(&op->dev); |
| edac_device_free_ctl_info(edac_dev); |
| } |
| |
| static const struct of_device_id mpc85xx_l2_err_of_match[] = { |
| { .compatible = "fsl,mpc8536-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8540-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8541-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8544-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8548-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8555-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8560-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8568-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8569-l2-cache-controller", }, |
| { .compatible = "fsl,mpc8572-l2-cache-controller", }, |
| { .compatible = "fsl,p1020-l2-cache-controller", }, |
| { .compatible = "fsl,p1021-l2-cache-controller", }, |
| { .compatible = "fsl,p2020-l2-cache-controller", }, |
| { .compatible = "fsl,t2080-l2-cache-controller", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mpc85xx_l2_err_of_match); |
| |
| static struct platform_driver mpc85xx_l2_err_driver = { |
| .probe = mpc85xx_l2_err_probe, |
| .remove_new = mpc85xx_l2_err_remove, |
| .driver = { |
| .name = "mpc85xx_l2_err", |
| .of_match_table = mpc85xx_l2_err_of_match, |
| }, |
| }; |
| |
| static const struct of_device_id mpc85xx_mc_err_of_match[] = { |
| { .compatible = "fsl,mpc8536-memory-controller", }, |
| { .compatible = "fsl,mpc8540-memory-controller", }, |
| { .compatible = "fsl,mpc8541-memory-controller", }, |
| { .compatible = "fsl,mpc8544-memory-controller", }, |
| { .compatible = "fsl,mpc8548-memory-controller", }, |
| { .compatible = "fsl,mpc8555-memory-controller", }, |
| { .compatible = "fsl,mpc8560-memory-controller", }, |
| { .compatible = "fsl,mpc8568-memory-controller", }, |
| { .compatible = "fsl,mpc8569-memory-controller", }, |
| { .compatible = "fsl,mpc8572-memory-controller", }, |
| { .compatible = "fsl,mpc8349-memory-controller", }, |
| { .compatible = "fsl,p1020-memory-controller", }, |
| { .compatible = "fsl,p1021-memory-controller", }, |
| { .compatible = "fsl,p2020-memory-controller", }, |
| { .compatible = "fsl,qoriq-memory-controller", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match); |
| |
| static struct platform_driver mpc85xx_mc_err_driver = { |
| .probe = fsl_mc_err_probe, |
| .remove_new = fsl_mc_err_remove, |
| .driver = { |
| .name = "mpc85xx_mc_err", |
| .of_match_table = mpc85xx_mc_err_of_match, |
| }, |
| }; |
| |
| static struct platform_driver * const drivers[] = { |
| &mpc85xx_mc_err_driver, |
| &mpc85xx_l2_err_driver, |
| #ifdef CONFIG_PCI |
| &mpc85xx_pci_err_driver, |
| #endif |
| }; |
| |
| static int __init mpc85xx_mc_init(void) |
| { |
| int res = 0; |
| u32 __maybe_unused pvr = 0; |
| |
| pr_info("Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software\n"); |
| |
| /* make sure error reporting method is sane */ |
| switch (edac_op_state) { |
| case EDAC_OPSTATE_POLL: |
| case EDAC_OPSTATE_INT: |
| break; |
| default: |
| edac_op_state = EDAC_OPSTATE_INT; |
| break; |
| } |
| |
| res = platform_register_drivers(drivers, ARRAY_SIZE(drivers)); |
| if (res) |
| pr_warn(EDAC_MOD_STR "drivers fail to register\n"); |
| |
| return 0; |
| } |
| |
| module_init(mpc85xx_mc_init); |
| |
| static void __exit mpc85xx_mc_exit(void) |
| { |
| platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); |
| } |
| |
| module_exit(mpc85xx_mc_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Montavista Software, Inc."); |
| module_param(edac_op_state, int, 0444); |
| MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll, 2=Interrupt"); |