| /* |
| * Copyright 2012 Red Hat Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, |
| * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR |
| * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE |
| * USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| */ |
| /* |
| * Authors: Dave Airlie <airlied@redhat.com> |
| */ |
| |
| #include <linux/pci.h> |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_gem.h> |
| #include <drm/drm_managed.h> |
| |
| #include "ast_drv.h" |
| |
| static void ast_detect_widescreen(struct ast_device *ast) |
| { |
| u8 jreg; |
| |
| /* Check if we support wide screen */ |
| switch (AST_GEN(ast)) { |
| case 1: |
| ast->support_wide_screen = false; |
| break; |
| default: |
| jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd0, 0xff); |
| if (!(jreg & 0x80)) |
| ast->support_wide_screen = true; |
| else if (jreg & 0x01) |
| ast->support_wide_screen = true; |
| else { |
| ast->support_wide_screen = false; |
| if (ast->chip == AST1300) |
| ast->support_wide_screen = true; |
| if (ast->chip == AST1400) |
| ast->support_wide_screen = true; |
| if (ast->chip == AST2510) |
| ast->support_wide_screen = true; |
| if (IS_AST_GEN7(ast)) |
| ast->support_wide_screen = true; |
| } |
| break; |
| } |
| } |
| |
| static void ast_detect_tx_chip(struct ast_device *ast, bool need_post) |
| { |
| struct drm_device *dev = &ast->base; |
| u8 jreg; |
| |
| /* Check 3rd Tx option (digital output afaik) */ |
| ast->tx_chip_types |= AST_TX_NONE_BIT; |
| |
| /* |
| * VGACRA3 Enhanced Color Mode Register, check if DVO is already |
| * enabled, in that case, assume we have a SIL164 TMDS transmitter |
| * |
| * Don't make that assumption if we the chip wasn't enabled and |
| * is at power-on reset, otherwise we'll incorrectly "detect" a |
| * SIL164 when there is none. |
| */ |
| if (!need_post) { |
| jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xa3, 0xff); |
| if (jreg & 0x80) |
| ast->tx_chip_types = AST_TX_SIL164_BIT; |
| } |
| |
| if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast) || IS_AST_GEN6(ast)) { |
| /* |
| * On AST GEN4+, look the configuration set by the SoC in |
| * the SOC scratch register #1 bits 11:8 (interestingly marked |
| * as "reserved" in the spec) |
| */ |
| jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1, 0xff); |
| switch (jreg) { |
| case 0x04: |
| ast->tx_chip_types = AST_TX_SIL164_BIT; |
| break; |
| case 0x08: |
| ast->dp501_fw_addr = drmm_kzalloc(dev, 32*1024, GFP_KERNEL); |
| if (ast->dp501_fw_addr) { |
| /* backup firmware */ |
| if (ast_backup_fw(dev, ast->dp501_fw_addr, 32*1024)) { |
| drmm_kfree(dev, ast->dp501_fw_addr); |
| ast->dp501_fw_addr = NULL; |
| } |
| } |
| fallthrough; |
| case 0x0c: |
| ast->tx_chip_types = AST_TX_DP501_BIT; |
| } |
| } else if (IS_AST_GEN7(ast)) { |
| if (ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xD1, TX_TYPE_MASK) == |
| ASTDP_DPMCU_TX) { |
| ast->tx_chip_types = AST_TX_ASTDP_BIT; |
| ast_dp_launch(&ast->base); |
| } |
| } |
| |
| /* Print stuff for diagnostic purposes */ |
| if (ast->tx_chip_types & AST_TX_NONE_BIT) |
| drm_info(dev, "Using analog VGA\n"); |
| if (ast->tx_chip_types & AST_TX_SIL164_BIT) |
| drm_info(dev, "Using Sil164 TMDS transmitter\n"); |
| if (ast->tx_chip_types & AST_TX_DP501_BIT) |
| drm_info(dev, "Using DP501 DisplayPort transmitter\n"); |
| if (ast->tx_chip_types & AST_TX_ASTDP_BIT) |
| drm_info(dev, "Using ASPEED DisplayPort transmitter\n"); |
| } |
| |
| static int ast_get_dram_info(struct drm_device *dev) |
| { |
| struct device_node *np = dev->dev->of_node; |
| struct ast_device *ast = to_ast_device(dev); |
| uint32_t mcr_cfg, mcr_scu_mpll, mcr_scu_strap; |
| uint32_t denum, num, div, ref_pll, dsel; |
| |
| switch (ast->config_mode) { |
| case ast_use_dt: |
| /* |
| * If some properties are missing, use reasonable |
| * defaults for GEN5 |
| */ |
| if (of_property_read_u32(np, "aspeed,mcr-configuration", |
| &mcr_cfg)) |
| mcr_cfg = 0x00000577; |
| if (of_property_read_u32(np, "aspeed,mcr-scu-mpll", |
| &mcr_scu_mpll)) |
| mcr_scu_mpll = 0x000050C0; |
| if (of_property_read_u32(np, "aspeed,mcr-scu-strap", |
| &mcr_scu_strap)) |
| mcr_scu_strap = 0; |
| break; |
| case ast_use_p2a: |
| ast_write32(ast, 0xf004, 0x1e6e0000); |
| ast_write32(ast, 0xf000, 0x1); |
| mcr_cfg = ast_read32(ast, 0x10004); |
| mcr_scu_mpll = ast_read32(ast, 0x10120); |
| mcr_scu_strap = ast_read32(ast, 0x10170); |
| break; |
| case ast_use_defaults: |
| default: |
| ast->dram_bus_width = 16; |
| ast->dram_type = AST_DRAM_1Gx16; |
| if (IS_AST_GEN6(ast)) |
| ast->mclk = 800; |
| else |
| ast->mclk = 396; |
| return 0; |
| } |
| |
| if (mcr_cfg & 0x40) |
| ast->dram_bus_width = 16; |
| else |
| ast->dram_bus_width = 32; |
| |
| if (IS_AST_GEN6(ast)) { |
| switch (mcr_cfg & 0x03) { |
| case 0: |
| ast->dram_type = AST_DRAM_1Gx16; |
| break; |
| default: |
| case 1: |
| ast->dram_type = AST_DRAM_2Gx16; |
| break; |
| case 2: |
| ast->dram_type = AST_DRAM_4Gx16; |
| break; |
| case 3: |
| ast->dram_type = AST_DRAM_8Gx16; |
| break; |
| } |
| } else if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast)) { |
| switch (mcr_cfg & 0x03) { |
| case 0: |
| ast->dram_type = AST_DRAM_512Mx16; |
| break; |
| default: |
| case 1: |
| ast->dram_type = AST_DRAM_1Gx16; |
| break; |
| case 2: |
| ast->dram_type = AST_DRAM_2Gx16; |
| break; |
| case 3: |
| ast->dram_type = AST_DRAM_4Gx16; |
| break; |
| } |
| } else { |
| switch (mcr_cfg & 0x0c) { |
| case 0: |
| case 4: |
| ast->dram_type = AST_DRAM_512Mx16; |
| break; |
| case 8: |
| if (mcr_cfg & 0x40) |
| ast->dram_type = AST_DRAM_1Gx16; |
| else |
| ast->dram_type = AST_DRAM_512Mx32; |
| break; |
| case 0xc: |
| ast->dram_type = AST_DRAM_1Gx32; |
| break; |
| } |
| } |
| |
| if (mcr_scu_strap & 0x2000) |
| ref_pll = 14318; |
| else |
| ref_pll = 12000; |
| |
| denum = mcr_scu_mpll & 0x1f; |
| num = (mcr_scu_mpll & 0x3fe0) >> 5; |
| dsel = (mcr_scu_mpll & 0xc000) >> 14; |
| switch (dsel) { |
| case 3: |
| div = 0x4; |
| break; |
| case 2: |
| case 1: |
| div = 0x2; |
| break; |
| default: |
| div = 0x1; |
| break; |
| } |
| ast->mclk = ref_pll * (num + 2) / ((denum + 2) * (div * 1000)); |
| return 0; |
| } |
| |
| struct drm_device *ast_device_create(struct pci_dev *pdev, |
| const struct drm_driver *drv, |
| enum ast_chip chip, |
| enum ast_config_mode config_mode, |
| void __iomem *regs, |
| void __iomem *ioregs, |
| bool need_post) |
| { |
| struct drm_device *dev; |
| struct ast_device *ast; |
| int ret; |
| |
| ast = devm_drm_dev_alloc(&pdev->dev, drv, struct ast_device, base); |
| if (IS_ERR(ast)) |
| return ERR_CAST(ast); |
| dev = &ast->base; |
| |
| ast->chip = chip; |
| ast->config_mode = config_mode; |
| ast->regs = regs; |
| ast->ioregs = ioregs; |
| |
| ast_detect_widescreen(ast); |
| ast_detect_tx_chip(ast, need_post); |
| |
| ret = ast_get_dram_info(dev); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| drm_info(dev, "dram MCLK=%u Mhz type=%d bus_width=%d\n", |
| ast->mclk, ast->dram_type, ast->dram_bus_width); |
| |
| if (need_post) |
| ast_post_gpu(dev); |
| |
| ret = ast_mm_init(ast); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| /* map reserved buffer */ |
| ast->dp501_fw_buf = NULL; |
| if (ast->vram_size < pci_resource_len(pdev, 0)) { |
| ast->dp501_fw_buf = pci_iomap_range(pdev, 0, ast->vram_size, 0); |
| if (!ast->dp501_fw_buf) |
| drm_info(dev, "failed to map reserved buffer!\n"); |
| } |
| |
| ret = ast_mode_config_init(ast); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| return dev; |
| } |