| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2016 Texas Instruments |
| * Author: Jyri Sarha <jsarha@ti.com> |
| */ |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/media-bus-format.h> |
| #include <linux/module.h> |
| #include <linux/of_graph.h> |
| #include <linux/platform_device.h> |
| #include <linux/workqueue.h> |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_bridge.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_print.h> |
| #include <drm/drm_probe_helper.h> |
| |
| #define HOTPLUG_DEBOUNCE_MS 1100 |
| |
| struct tfp410 { |
| struct drm_bridge bridge; |
| struct drm_connector connector; |
| |
| u32 bus_format; |
| struct delayed_work hpd_work; |
| struct gpio_desc *powerdown; |
| |
| struct drm_bridge_timings timings; |
| struct drm_bridge *next_bridge; |
| |
| struct device *dev; |
| }; |
| |
| static inline struct tfp410 * |
| drm_bridge_to_tfp410(struct drm_bridge *bridge) |
| { |
| return container_of(bridge, struct tfp410, bridge); |
| } |
| |
| static inline struct tfp410 * |
| drm_connector_to_tfp410(struct drm_connector *connector) |
| { |
| return container_of(connector, struct tfp410, connector); |
| } |
| |
| static int tfp410_get_modes(struct drm_connector *connector) |
| { |
| struct tfp410 *dvi = drm_connector_to_tfp410(connector); |
| const struct drm_edid *drm_edid; |
| int ret; |
| |
| if (dvi->next_bridge->ops & DRM_BRIDGE_OP_EDID) { |
| drm_edid = drm_bridge_edid_read(dvi->next_bridge, connector); |
| if (!drm_edid) |
| DRM_INFO("EDID read failed. Fallback to standard modes\n"); |
| } else { |
| drm_edid = NULL; |
| } |
| |
| drm_edid_connector_update(connector, drm_edid); |
| |
| if (!drm_edid) { |
| /* |
| * No EDID, fallback on the XGA standard modes and prefer a mode |
| * pretty much anything can handle. |
| */ |
| ret = drm_add_modes_noedid(connector, 1920, 1200); |
| drm_set_preferred_mode(connector, 1024, 768); |
| return ret; |
| } |
| |
| ret = drm_edid_connector_add_modes(connector); |
| |
| drm_edid_free(drm_edid); |
| |
| return ret; |
| } |
| |
| static const struct drm_connector_helper_funcs tfp410_con_helper_funcs = { |
| .get_modes = tfp410_get_modes, |
| }; |
| |
| static enum drm_connector_status |
| tfp410_connector_detect(struct drm_connector *connector, bool force) |
| { |
| struct tfp410 *dvi = drm_connector_to_tfp410(connector); |
| |
| return drm_bridge_detect(dvi->next_bridge); |
| } |
| |
| static const struct drm_connector_funcs tfp410_con_funcs = { |
| .detect = tfp410_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = drm_connector_cleanup, |
| .reset = drm_atomic_helper_connector_reset, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static void tfp410_hpd_work_func(struct work_struct *work) |
| { |
| struct tfp410 *dvi; |
| |
| dvi = container_of(work, struct tfp410, hpd_work.work); |
| |
| if (dvi->bridge.dev) |
| drm_helper_hpd_irq_event(dvi->bridge.dev); |
| } |
| |
| static void tfp410_hpd_callback(void *arg, enum drm_connector_status status) |
| { |
| struct tfp410 *dvi = arg; |
| |
| mod_delayed_work(system_wq, &dvi->hpd_work, |
| msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS)); |
| } |
| |
| static int tfp410_attach(struct drm_bridge *bridge, |
| enum drm_bridge_attach_flags flags) |
| { |
| struct tfp410 *dvi = drm_bridge_to_tfp410(bridge); |
| int ret; |
| |
| ret = drm_bridge_attach(bridge->encoder, dvi->next_bridge, bridge, |
| DRM_BRIDGE_ATTACH_NO_CONNECTOR); |
| if (ret < 0) |
| return ret; |
| |
| if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) |
| return 0; |
| |
| if (!bridge->encoder) { |
| dev_err(dvi->dev, "Missing encoder\n"); |
| return -ENODEV; |
| } |
| |
| if (dvi->next_bridge->ops & DRM_BRIDGE_OP_DETECT) |
| dvi->connector.polled = DRM_CONNECTOR_POLL_HPD; |
| else |
| dvi->connector.polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; |
| |
| if (dvi->next_bridge->ops & DRM_BRIDGE_OP_HPD) { |
| INIT_DELAYED_WORK(&dvi->hpd_work, tfp410_hpd_work_func); |
| drm_bridge_hpd_enable(dvi->next_bridge, tfp410_hpd_callback, |
| dvi); |
| } |
| |
| drm_connector_helper_add(&dvi->connector, |
| &tfp410_con_helper_funcs); |
| ret = drm_connector_init_with_ddc(bridge->dev, &dvi->connector, |
| &tfp410_con_funcs, |
| dvi->next_bridge->type, |
| dvi->next_bridge->ddc); |
| if (ret) { |
| dev_err(dvi->dev, "drm_connector_init_with_ddc() failed: %d\n", |
| ret); |
| return ret; |
| } |
| |
| drm_display_info_set_bus_formats(&dvi->connector.display_info, |
| &dvi->bus_format, 1); |
| |
| drm_connector_attach_encoder(&dvi->connector, bridge->encoder); |
| |
| return 0; |
| } |
| |
| static void tfp410_detach(struct drm_bridge *bridge) |
| { |
| struct tfp410 *dvi = drm_bridge_to_tfp410(bridge); |
| |
| if (dvi->connector.dev && dvi->next_bridge->ops & DRM_BRIDGE_OP_HPD) { |
| drm_bridge_hpd_disable(dvi->next_bridge); |
| cancel_delayed_work_sync(&dvi->hpd_work); |
| } |
| } |
| |
| static void tfp410_enable(struct drm_bridge *bridge) |
| { |
| struct tfp410 *dvi = drm_bridge_to_tfp410(bridge); |
| |
| gpiod_set_value_cansleep(dvi->powerdown, 0); |
| } |
| |
| static void tfp410_disable(struct drm_bridge *bridge) |
| { |
| struct tfp410 *dvi = drm_bridge_to_tfp410(bridge); |
| |
| gpiod_set_value_cansleep(dvi->powerdown, 1); |
| } |
| |
| static enum drm_mode_status tfp410_mode_valid(struct drm_bridge *bridge, |
| const struct drm_display_info *info, |
| const struct drm_display_mode *mode) |
| { |
| if (mode->clock < 25000) |
| return MODE_CLOCK_LOW; |
| |
| if (mode->clock > 165000) |
| return MODE_CLOCK_HIGH; |
| |
| return MODE_OK; |
| } |
| |
| static u32 *tfp410_get_input_bus_fmts(struct drm_bridge *bridge, |
| struct drm_bridge_state *bridge_state, |
| struct drm_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state, |
| u32 output_fmt, |
| unsigned int *num_input_fmts) |
| { |
| struct tfp410 *dvi = drm_bridge_to_tfp410(bridge); |
| u32 *input_fmts; |
| |
| *num_input_fmts = 0; |
| |
| input_fmts = kzalloc(sizeof(*input_fmts), GFP_KERNEL); |
| if (!input_fmts) |
| return NULL; |
| |
| *num_input_fmts = 1; |
| input_fmts[0] = dvi->bus_format; |
| |
| return input_fmts; |
| } |
| |
| static int tfp410_atomic_check(struct drm_bridge *bridge, |
| struct drm_bridge_state *bridge_state, |
| struct drm_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct tfp410 *dvi = drm_bridge_to_tfp410(bridge); |
| |
| /* |
| * There might be flags negotiation supported in future. |
| * Set the bus flags in atomic_check statically for now. |
| */ |
| bridge_state->input_bus_cfg.flags = dvi->timings.input_bus_flags; |
| |
| return 0; |
| } |
| |
| static const struct drm_bridge_funcs tfp410_bridge_funcs = { |
| .attach = tfp410_attach, |
| .detach = tfp410_detach, |
| .enable = tfp410_enable, |
| .disable = tfp410_disable, |
| .mode_valid = tfp410_mode_valid, |
| .atomic_reset = drm_atomic_helper_bridge_reset, |
| .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, |
| .atomic_get_input_bus_fmts = tfp410_get_input_bus_fmts, |
| .atomic_check = tfp410_atomic_check, |
| }; |
| |
| static const struct drm_bridge_timings tfp410_default_timings = { |
| .input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE |
| | DRM_BUS_FLAG_DE_HIGH, |
| .setup_time_ps = 1200, |
| .hold_time_ps = 1300, |
| }; |
| |
| static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c) |
| { |
| struct drm_bridge_timings *timings = &dvi->timings; |
| struct device_node *ep; |
| u32 pclk_sample = 0; |
| u32 bus_width = 24; |
| u32 deskew = 0; |
| |
| /* Start with defaults. */ |
| *timings = tfp410_default_timings; |
| |
| if (i2c) |
| /* |
| * In I2C mode timings are configured through the I2C interface. |
| * As the driver doesn't support I2C configuration yet, we just |
| * go with the defaults (BSEL=1, DSEL=1, DKEN=0, EDGE=1). |
| */ |
| return 0; |
| |
| /* |
| * In non-I2C mode, timings are configured through the BSEL, DSEL, DKEN |
| * and EDGE pins. They are specified in DT through endpoint properties |
| * and vendor-specific properties. |
| */ |
| ep = of_graph_get_endpoint_by_regs(dvi->dev->of_node, 0, 0); |
| if (!ep) |
| return -EINVAL; |
| |
| /* Get the sampling edge from the endpoint. */ |
| of_property_read_u32(ep, "pclk-sample", &pclk_sample); |
| of_property_read_u32(ep, "bus-width", &bus_width); |
| of_node_put(ep); |
| |
| timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH; |
| |
| switch (pclk_sample) { |
| case 0: |
| timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
| | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE; |
| break; |
| case 1: |
| timings->input_bus_flags |= DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE |
| | DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (bus_width) { |
| case 12: |
| dvi->bus_format = MEDIA_BUS_FMT_RGB888_2X12_LE; |
| break; |
| case 24: |
| dvi->bus_format = MEDIA_BUS_FMT_RGB888_1X24; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Get the setup and hold time from vendor-specific properties. */ |
| of_property_read_u32(dvi->dev->of_node, "ti,deskew", &deskew); |
| if (deskew > 7) |
| return -EINVAL; |
| |
| timings->setup_time_ps = 1200 - 350 * ((s32)deskew - 4); |
| timings->hold_time_ps = max(0, 1300 + 350 * ((s32)deskew - 4)); |
| |
| return 0; |
| } |
| |
| static int tfp410_init(struct device *dev, bool i2c) |
| { |
| struct device_node *node; |
| struct tfp410 *dvi; |
| int ret; |
| |
| if (!dev->of_node) { |
| dev_err(dev, "device-tree data is missing\n"); |
| return -ENXIO; |
| } |
| |
| dvi = devm_kzalloc(dev, sizeof(*dvi), GFP_KERNEL); |
| if (!dvi) |
| return -ENOMEM; |
| |
| dvi->dev = dev; |
| dev_set_drvdata(dev, dvi); |
| |
| dvi->bridge.funcs = &tfp410_bridge_funcs; |
| dvi->bridge.of_node = dev->of_node; |
| dvi->bridge.timings = &dvi->timings; |
| dvi->bridge.type = DRM_MODE_CONNECTOR_DVID; |
| |
| ret = tfp410_parse_timings(dvi, i2c); |
| if (ret) |
| return ret; |
| |
| /* Get the next bridge, connected to port@1. */ |
| node = of_graph_get_remote_node(dev->of_node, 1, -1); |
| if (!node) |
| return -ENODEV; |
| |
| dvi->next_bridge = of_drm_find_bridge(node); |
| of_node_put(node); |
| |
| if (!dvi->next_bridge) |
| return -EPROBE_DEFER; |
| |
| /* Get the powerdown GPIO. */ |
| dvi->powerdown = devm_gpiod_get_optional(dev, "powerdown", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(dvi->powerdown)) { |
| dev_err(dev, "failed to parse powerdown gpio\n"); |
| return PTR_ERR(dvi->powerdown); |
| } |
| |
| /* Register the DRM bridge. */ |
| drm_bridge_add(&dvi->bridge); |
| |
| return 0; |
| } |
| |
| static void tfp410_fini(struct device *dev) |
| { |
| struct tfp410 *dvi = dev_get_drvdata(dev); |
| |
| drm_bridge_remove(&dvi->bridge); |
| } |
| |
| static int tfp410_probe(struct platform_device *pdev) |
| { |
| return tfp410_init(&pdev->dev, false); |
| } |
| |
| static void tfp410_remove(struct platform_device *pdev) |
| { |
| tfp410_fini(&pdev->dev); |
| } |
| |
| static const struct of_device_id tfp410_match[] = { |
| { .compatible = "ti,tfp410" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, tfp410_match); |
| |
| static struct platform_driver tfp410_platform_driver = { |
| .probe = tfp410_probe, |
| .remove_new = tfp410_remove, |
| .driver = { |
| .name = "tfp410-bridge", |
| .of_match_table = tfp410_match, |
| }, |
| }; |
| |
| #if IS_ENABLED(CONFIG_I2C) |
| /* There is currently no i2c functionality. */ |
| static int tfp410_i2c_probe(struct i2c_client *client) |
| { |
| int reg; |
| |
| if (!client->dev.of_node || |
| of_property_read_u32(client->dev.of_node, "reg", ®)) { |
| dev_err(&client->dev, |
| "Can't get i2c reg property from device-tree\n"); |
| return -ENXIO; |
| } |
| |
| return tfp410_init(&client->dev, true); |
| } |
| |
| static void tfp410_i2c_remove(struct i2c_client *client) |
| { |
| tfp410_fini(&client->dev); |
| } |
| |
| static const struct i2c_device_id tfp410_i2c_ids[] = { |
| { "tfp410", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, tfp410_i2c_ids); |
| |
| static struct i2c_driver tfp410_i2c_driver = { |
| .driver = { |
| .name = "tfp410", |
| .of_match_table = tfp410_match, |
| }, |
| .id_table = tfp410_i2c_ids, |
| .probe = tfp410_i2c_probe, |
| .remove = tfp410_i2c_remove, |
| }; |
| #endif /* IS_ENABLED(CONFIG_I2C) */ |
| |
| static struct { |
| uint i2c:1; |
| uint platform:1; |
| } tfp410_registered_driver; |
| |
| static int __init tfp410_module_init(void) |
| { |
| int ret; |
| |
| #if IS_ENABLED(CONFIG_I2C) |
| ret = i2c_add_driver(&tfp410_i2c_driver); |
| if (ret) |
| pr_err("%s: registering i2c driver failed: %d", |
| __func__, ret); |
| else |
| tfp410_registered_driver.i2c = 1; |
| #endif |
| |
| ret = platform_driver_register(&tfp410_platform_driver); |
| if (ret) |
| pr_err("%s: registering platform driver failed: %d", |
| __func__, ret); |
| else |
| tfp410_registered_driver.platform = 1; |
| |
| if (tfp410_registered_driver.i2c || |
| tfp410_registered_driver.platform) |
| return 0; |
| |
| return ret; |
| } |
| module_init(tfp410_module_init); |
| |
| static void __exit tfp410_module_exit(void) |
| { |
| #if IS_ENABLED(CONFIG_I2C) |
| if (tfp410_registered_driver.i2c) |
| i2c_del_driver(&tfp410_i2c_driver); |
| #endif |
| if (tfp410_registered_driver.platform) |
| platform_driver_unregister(&tfp410_platform_driver); |
| } |
| module_exit(tfp410_module_exit); |
| |
| MODULE_AUTHOR("Jyri Sarha <jsarha@ti.com>"); |
| MODULE_DESCRIPTION("TI TFP410 DVI bridge driver"); |
| MODULE_LICENSE("GPL"); |