| // SPDX-License-Identifier: GPL-2.0-only |
| /* drivers/gpu/drm/exynos5433_drm_decon.c |
| * |
| * Copyright (C) 2015 Samsung Electronics Co.Ltd |
| * Authors: |
| * Joonyoung Shim <jy0922.shim@samsung.com> |
| * Hyungwon Hwang <human.hwang@samsung.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/component.h> |
| #include <linux/iopoll.h> |
| #include <linux/irq.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| |
| #include <drm/drm_blend.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_framebuffer.h> |
| #include <drm/drm_vblank.h> |
| |
| #include "exynos_drm_crtc.h" |
| #include "exynos_drm_drv.h" |
| #include "exynos_drm_fb.h" |
| #include "exynos_drm_plane.h" |
| #include "regs-decon5433.h" |
| |
| #define DSD_CFG_MUX 0x1004 |
| #define DSD_CFG_MUX_TE_UNMASK_GLOBAL BIT(13) |
| |
| #define WINDOWS_NR 5 |
| #define PRIMARY_WIN 2 |
| #define CURSON_WIN 4 |
| |
| #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 |
| |
| #define I80_HW_TRG (1 << 0) |
| #define IFTYPE_HDMI (1 << 1) |
| |
| static const char * const decon_clks_name[] = { |
| "pclk", |
| "aclk_decon", |
| "aclk_smmu_decon0x", |
| "aclk_xiu_decon0x", |
| "pclk_smmu_decon0x", |
| "aclk_smmu_decon1x", |
| "aclk_xiu_decon1x", |
| "pclk_smmu_decon1x", |
| "sclk_decon_vclk", |
| "sclk_decon_eclk", |
| }; |
| |
| struct decon_context { |
| struct device *dev; |
| struct drm_device *drm_dev; |
| void *dma_priv; |
| struct exynos_drm_crtc *crtc; |
| struct exynos_drm_plane planes[WINDOWS_NR]; |
| struct exynos_drm_plane_config configs[WINDOWS_NR]; |
| void __iomem *addr; |
| struct regmap *sysreg; |
| struct clk *clks[ARRAY_SIZE(decon_clks_name)]; |
| unsigned int irq; |
| unsigned int irq_vsync; |
| unsigned int irq_lcd_sys; |
| unsigned int te_irq; |
| unsigned long out_type; |
| int first_win; |
| spinlock_t vblank_lock; |
| u32 frame_id; |
| }; |
| |
| static const uint32_t decon_formats[] = { |
| DRM_FORMAT_XRGB1555, |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_ARGB8888, |
| }; |
| |
| static const enum drm_plane_type decon_win_types[WINDOWS_NR] = { |
| [PRIMARY_WIN] = DRM_PLANE_TYPE_PRIMARY, |
| [CURSON_WIN] = DRM_PLANE_TYPE_CURSOR, |
| }; |
| |
| static const unsigned int capabilities[WINDOWS_NR] = { |
| 0, |
| EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND, |
| EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND, |
| EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND, |
| EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND, |
| }; |
| |
| static inline void decon_set_bits(struct decon_context *ctx, u32 reg, u32 mask, |
| u32 val) |
| { |
| val = (val & mask) | (readl(ctx->addr + reg) & ~mask); |
| writel(val, ctx->addr + reg); |
| } |
| |
| static int decon_enable_vblank(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| u32 val; |
| |
| val = VIDINTCON0_INTEN; |
| if (crtc->i80_mode) |
| val |= VIDINTCON0_FRAMEDONE; |
| else |
| val |= VIDINTCON0_INTFRMEN | VIDINTCON0_FRAMESEL_FP; |
| |
| writel(val, ctx->addr + DECON_VIDINTCON0); |
| |
| enable_irq(ctx->irq); |
| if (!(ctx->out_type & I80_HW_TRG)) |
| enable_irq(ctx->te_irq); |
| |
| return 0; |
| } |
| |
| static void decon_disable_vblank(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| |
| if (!(ctx->out_type & I80_HW_TRG)) |
| disable_irq_nosync(ctx->te_irq); |
| disable_irq_nosync(ctx->irq); |
| |
| writel(0, ctx->addr + DECON_VIDINTCON0); |
| } |
| |
| /* return number of starts/ends of frame transmissions since reset */ |
| static u32 decon_get_frame_count(struct decon_context *ctx, bool end) |
| { |
| u32 frm, pfrm, status, cnt = 2; |
| |
| /* To get consistent result repeat read until frame id is stable. |
| * Usually the loop will be executed once, in rare cases when the loop |
| * is executed at frame change time 2nd pass will be needed. |
| */ |
| frm = readl(ctx->addr + DECON_CRFMID); |
| do { |
| status = readl(ctx->addr + DECON_VIDCON1); |
| pfrm = frm; |
| frm = readl(ctx->addr + DECON_CRFMID); |
| } while (frm != pfrm && --cnt); |
| |
| /* CRFMID is incremented on BPORCH in case of I80 and on VSYNC in case |
| * of RGB, it should be taken into account. |
| */ |
| if (!frm) |
| return 0; |
| |
| switch (status & (VIDCON1_VSTATUS_MASK | VIDCON1_I80_ACTIVE)) { |
| case VIDCON1_VSTATUS_VS: |
| if (!(ctx->crtc->i80_mode)) |
| --frm; |
| break; |
| case VIDCON1_VSTATUS_BP: |
| --frm; |
| break; |
| case VIDCON1_I80_ACTIVE: |
| case VIDCON1_VSTATUS_AC: |
| if (end) |
| --frm; |
| break; |
| default: |
| break; |
| } |
| |
| return frm; |
| } |
| |
| static void decon_setup_trigger(struct decon_context *ctx) |
| { |
| if (!ctx->crtc->i80_mode && !(ctx->out_type & I80_HW_TRG)) |
| return; |
| |
| if (!(ctx->out_type & I80_HW_TRG)) { |
| writel(TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | |
| TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN, |
| ctx->addr + DECON_TRIGCON); |
| return; |
| } |
| |
| writel(TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | TRIGCON_HWTRIGMASK |
| | TRIGCON_HWTRIGEN, ctx->addr + DECON_TRIGCON); |
| |
| if (regmap_update_bits(ctx->sysreg, DSD_CFG_MUX, |
| DSD_CFG_MUX_TE_UNMASK_GLOBAL, ~0)) |
| DRM_DEV_ERROR(ctx->dev, "Cannot update sysreg.\n"); |
| } |
| |
| static void decon_commit(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| struct drm_display_mode *m = &crtc->base.mode; |
| bool interlaced = false; |
| u32 val; |
| |
| if (ctx->out_type & IFTYPE_HDMI) { |
| m->crtc_hsync_start = m->crtc_hdisplay + 10; |
| m->crtc_hsync_end = m->crtc_htotal - 92; |
| m->crtc_vsync_start = m->crtc_vdisplay + 1; |
| m->crtc_vsync_end = m->crtc_vsync_start + 1; |
| if (m->flags & DRM_MODE_FLAG_INTERLACE) |
| interlaced = true; |
| } |
| |
| decon_setup_trigger(ctx); |
| |
| /* lcd on and use command if */ |
| val = VIDOUT_LCD_ON; |
| if (interlaced) |
| val |= VIDOUT_INTERLACE_EN_F; |
| if (crtc->i80_mode) { |
| val |= VIDOUT_COMMAND_IF; |
| } else { |
| val |= VIDOUT_RGB_IF; |
| } |
| |
| writel(val, ctx->addr + DECON_VIDOUTCON0); |
| |
| if (interlaced) |
| val = VIDTCON2_LINEVAL(m->vdisplay / 2 - 1) | |
| VIDTCON2_HOZVAL(m->hdisplay - 1); |
| else |
| val = VIDTCON2_LINEVAL(m->vdisplay - 1) | |
| VIDTCON2_HOZVAL(m->hdisplay - 1); |
| writel(val, ctx->addr + DECON_VIDTCON2); |
| |
| if (!crtc->i80_mode) { |
| int vbp = m->crtc_vtotal - m->crtc_vsync_end; |
| int vfp = m->crtc_vsync_start - m->crtc_vdisplay; |
| |
| if (interlaced) |
| vbp = vbp / 2 - 1; |
| val = VIDTCON00_VBPD_F(vbp - 1) | VIDTCON00_VFPD_F(vfp - 1); |
| writel(val, ctx->addr + DECON_VIDTCON00); |
| |
| val = VIDTCON01_VSPW_F( |
| m->crtc_vsync_end - m->crtc_vsync_start - 1); |
| writel(val, ctx->addr + DECON_VIDTCON01); |
| |
| val = VIDTCON10_HBPD_F( |
| m->crtc_htotal - m->crtc_hsync_end - 1) | |
| VIDTCON10_HFPD_F( |
| m->crtc_hsync_start - m->crtc_hdisplay - 1); |
| writel(val, ctx->addr + DECON_VIDTCON10); |
| |
| val = VIDTCON11_HSPW_F( |
| m->crtc_hsync_end - m->crtc_hsync_start - 1); |
| writel(val, ctx->addr + DECON_VIDTCON11); |
| } |
| |
| /* enable output and display signal */ |
| decon_set_bits(ctx, DECON_VIDCON0, VIDCON0_ENVID | VIDCON0_ENVID_F, ~0); |
| |
| decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0); |
| } |
| |
| static void decon_win_set_bldeq(struct decon_context *ctx, unsigned int win, |
| unsigned int alpha, unsigned int pixel_alpha) |
| { |
| u32 mask = BLENDERQ_A_FUNC_F(0xf) | BLENDERQ_B_FUNC_F(0xf); |
| u32 val = 0; |
| |
| switch (pixel_alpha) { |
| case DRM_MODE_BLEND_PIXEL_NONE: |
| case DRM_MODE_BLEND_COVERAGE: |
| val |= BLENDERQ_A_FUNC_F(BLENDERQ_ALPHA_A); |
| val |= BLENDERQ_B_FUNC_F(BLENDERQ_ONE_MINUS_ALPHA_A); |
| break; |
| case DRM_MODE_BLEND_PREMULTI: |
| default: |
| if (alpha != DRM_BLEND_ALPHA_OPAQUE) { |
| val |= BLENDERQ_A_FUNC_F(BLENDERQ_ALPHA0); |
| val |= BLENDERQ_B_FUNC_F(BLENDERQ_ONE_MINUS_ALPHA_A); |
| } else { |
| val |= BLENDERQ_A_FUNC_F(BLENDERQ_ONE); |
| val |= BLENDERQ_B_FUNC_F(BLENDERQ_ONE_MINUS_ALPHA_A); |
| } |
| break; |
| } |
| decon_set_bits(ctx, DECON_BLENDERQx(win), mask, val); |
| } |
| |
| static void decon_win_set_bldmod(struct decon_context *ctx, unsigned int win, |
| unsigned int alpha, unsigned int pixel_alpha) |
| { |
| u32 win_alpha = alpha >> 8; |
| u32 val = 0; |
| |
| switch (pixel_alpha) { |
| case DRM_MODE_BLEND_PIXEL_NONE: |
| break; |
| case DRM_MODE_BLEND_COVERAGE: |
| case DRM_MODE_BLEND_PREMULTI: |
| default: |
| val |= WINCONx_ALPHA_SEL_F; |
| val |= WINCONx_BLD_PIX_F; |
| val |= WINCONx_ALPHA_MUL_F; |
| break; |
| } |
| decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_BLEND_MODE_MASK, val); |
| |
| if (alpha != DRM_BLEND_ALPHA_OPAQUE) { |
| val = VIDOSD_Wx_ALPHA_R_F(win_alpha) | |
| VIDOSD_Wx_ALPHA_G_F(win_alpha) | |
| VIDOSD_Wx_ALPHA_B_F(win_alpha); |
| decon_set_bits(ctx, DECON_VIDOSDxC(win), |
| VIDOSDxC_ALPHA0_RGB_MASK, val); |
| decon_set_bits(ctx, DECON_BLENDCON, BLEND_NEW, BLEND_NEW); |
| } |
| } |
| |
| static void decon_win_set_pixfmt(struct decon_context *ctx, unsigned int win, |
| struct drm_framebuffer *fb) |
| { |
| struct exynos_drm_plane *plane = &ctx->planes[win]; |
| struct exynos_drm_plane_state *state = |
| to_exynos_plane_state(plane->base.state); |
| unsigned int alpha = state->base.alpha; |
| unsigned int pixel_alpha; |
| unsigned long val; |
| |
| if (fb->format->has_alpha) |
| pixel_alpha = state->base.pixel_blend_mode; |
| else |
| pixel_alpha = DRM_MODE_BLEND_PIXEL_NONE; |
| |
| val = readl(ctx->addr + DECON_WINCONx(win)); |
| val &= WINCONx_ENWIN_F; |
| |
| switch (fb->format->format) { |
| case DRM_FORMAT_XRGB1555: |
| val |= WINCONx_BPPMODE_16BPP_I1555; |
| val |= WINCONx_HAWSWP_F; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case DRM_FORMAT_RGB565: |
| val |= WINCONx_BPPMODE_16BPP_565; |
| val |= WINCONx_HAWSWP_F; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| val |= WINCONx_BPPMODE_24BPP_888; |
| val |= WINCONx_WSWP_F; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case DRM_FORMAT_ARGB8888: |
| default: |
| val |= WINCONx_BPPMODE_32BPP_A8888; |
| val |= WINCONx_WSWP_F; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| } |
| |
| DRM_DEV_DEBUG_KMS(ctx->dev, "cpp = %u\n", fb->format->cpp[0]); |
| |
| /* |
| * In case of exynos, setting dma-burst to 16Word causes permanent |
| * tearing for very small buffers, e.g. cursor buffer. Burst Mode |
| * switching which is based on plane size is not recommended as |
| * plane size varies a lot towards the end of the screen and rapid |
| * movement causes unstable DMA which results into iommu crash/tear. |
| */ |
| |
| if (fb->width < MIN_FB_WIDTH_FOR_16WORD_BURST) { |
| val &= ~WINCONx_BURSTLEN_MASK; |
| val |= WINCONx_BURSTLEN_8WORD; |
| } |
| decon_set_bits(ctx, DECON_WINCONx(win), ~WINCONx_BLEND_MODE_MASK, val); |
| |
| if (win > 0) { |
| decon_win_set_bldmod(ctx, win, alpha, pixel_alpha); |
| decon_win_set_bldeq(ctx, win, alpha, pixel_alpha); |
| } |
| } |
| |
| static void decon_shadow_protect(struct decon_context *ctx, bool protect) |
| { |
| decon_set_bits(ctx, DECON_SHADOWCON, SHADOWCON_PROTECT_MASK, |
| protect ? ~0 : 0); |
| } |
| |
| static void decon_atomic_begin(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| |
| decon_shadow_protect(ctx, true); |
| } |
| |
| #define BIT_VAL(x, e, s) (((x) & ((1 << ((e) - (s) + 1)) - 1)) << (s)) |
| #define COORDINATE_X(x) BIT_VAL((x), 23, 12) |
| #define COORDINATE_Y(x) BIT_VAL((x), 11, 0) |
| |
| static void decon_update_plane(struct exynos_drm_crtc *crtc, |
| struct exynos_drm_plane *plane) |
| { |
| struct exynos_drm_plane_state *state = |
| to_exynos_plane_state(plane->base.state); |
| struct decon_context *ctx = crtc->ctx; |
| struct drm_framebuffer *fb = state->base.fb; |
| unsigned int win = plane->index; |
| unsigned int cpp = fb->format->cpp[0]; |
| unsigned int pitch = fb->pitches[0]; |
| dma_addr_t dma_addr = exynos_drm_fb_dma_addr(fb, 0); |
| u32 val; |
| |
| if (crtc->base.mode.flags & DRM_MODE_FLAG_INTERLACE) { |
| val = COORDINATE_X(state->crtc.x) | |
| COORDINATE_Y(state->crtc.y / 2); |
| writel(val, ctx->addr + DECON_VIDOSDxA(win)); |
| |
| val = COORDINATE_X(state->crtc.x + state->crtc.w - 1) | |
| COORDINATE_Y((state->crtc.y + state->crtc.h) / 2 - 1); |
| writel(val, ctx->addr + DECON_VIDOSDxB(win)); |
| } else { |
| val = COORDINATE_X(state->crtc.x) | COORDINATE_Y(state->crtc.y); |
| writel(val, ctx->addr + DECON_VIDOSDxA(win)); |
| |
| val = COORDINATE_X(state->crtc.x + state->crtc.w - 1) | |
| COORDINATE_Y(state->crtc.y + state->crtc.h - 1); |
| writel(val, ctx->addr + DECON_VIDOSDxB(win)); |
| } |
| |
| val = VIDOSD_Wx_ALPHA_R_F(0xff) | VIDOSD_Wx_ALPHA_G_F(0xff) | |
| VIDOSD_Wx_ALPHA_B_F(0xff); |
| writel(val, ctx->addr + DECON_VIDOSDxC(win)); |
| |
| val = VIDOSD_Wx_ALPHA_R_F(0x0) | VIDOSD_Wx_ALPHA_G_F(0x0) | |
| VIDOSD_Wx_ALPHA_B_F(0x0); |
| writel(val, ctx->addr + DECON_VIDOSDxD(win)); |
| |
| writel(dma_addr, ctx->addr + DECON_VIDW0xADD0B0(win)); |
| |
| val = dma_addr + pitch * state->src.h; |
| writel(val, ctx->addr + DECON_VIDW0xADD1B0(win)); |
| |
| if (!(ctx->out_type & IFTYPE_HDMI)) |
| val = BIT_VAL(pitch - state->crtc.w * cpp, 27, 14) |
| | BIT_VAL(state->crtc.w * cpp, 13, 0); |
| else |
| val = BIT_VAL(pitch - state->crtc.w * cpp, 29, 15) |
| | BIT_VAL(state->crtc.w * cpp, 14, 0); |
| writel(val, ctx->addr + DECON_VIDW0xADD2(win)); |
| |
| decon_win_set_pixfmt(ctx, win, fb); |
| |
| /* window enable */ |
| decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_ENWIN_F, ~0); |
| } |
| |
| static void decon_disable_plane(struct exynos_drm_crtc *crtc, |
| struct exynos_drm_plane *plane) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| unsigned int win = plane->index; |
| |
| decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_ENWIN_F, 0); |
| } |
| |
| static void decon_atomic_flush(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ctx->vblank_lock, flags); |
| |
| decon_shadow_protect(ctx, false); |
| |
| decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0); |
| |
| ctx->frame_id = decon_get_frame_count(ctx, true); |
| |
| exynos_crtc_handle_event(crtc); |
| |
| spin_unlock_irqrestore(&ctx->vblank_lock, flags); |
| } |
| |
| static void decon_swreset(struct decon_context *ctx) |
| { |
| unsigned long flags; |
| u32 val; |
| int ret; |
| |
| writel(0, ctx->addr + DECON_VIDCON0); |
| readl_poll_timeout(ctx->addr + DECON_VIDCON0, val, |
| ~val & VIDCON0_STOP_STATUS, 12, 20000); |
| |
| writel(VIDCON0_SWRESET, ctx->addr + DECON_VIDCON0); |
| ret = readl_poll_timeout(ctx->addr + DECON_VIDCON0, val, |
| ~val & VIDCON0_SWRESET, 12, 20000); |
| |
| WARN(ret < 0, "failed to software reset DECON\n"); |
| |
| spin_lock_irqsave(&ctx->vblank_lock, flags); |
| ctx->frame_id = 0; |
| spin_unlock_irqrestore(&ctx->vblank_lock, flags); |
| |
| if (!(ctx->out_type & IFTYPE_HDMI)) |
| return; |
| |
| writel(VIDCON0_CLKVALUP | VIDCON0_VLCKFREE, ctx->addr + DECON_VIDCON0); |
| decon_set_bits(ctx, DECON_CMU, |
| CMU_CLKGAGE_MODE_SFR_F | CMU_CLKGAGE_MODE_MEM_F, ~0); |
| writel(VIDCON1_VCLK_RUN_VDEN_DISABLE, ctx->addr + DECON_VIDCON1); |
| writel(CRCCTRL_CRCEN | CRCCTRL_CRCSTART_F | CRCCTRL_CRCCLKEN, |
| ctx->addr + DECON_CRCCTRL); |
| } |
| |
| static void decon_atomic_enable(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| int ret; |
| |
| ret = pm_runtime_resume_and_get(ctx->dev); |
| if (ret < 0) { |
| DRM_DEV_ERROR(ctx->dev, "failed to enable DECON device.\n"); |
| return; |
| } |
| |
| exynos_drm_pipe_clk_enable(crtc, true); |
| |
| decon_swreset(ctx); |
| |
| decon_commit(ctx->crtc); |
| } |
| |
| static void decon_atomic_disable(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| int i; |
| |
| if (!(ctx->out_type & I80_HW_TRG)) |
| synchronize_irq(ctx->te_irq); |
| synchronize_irq(ctx->irq); |
| |
| /* |
| * We need to make sure that all windows are disabled before we |
| * suspend that connector. Otherwise we might try to scan from |
| * a destroyed buffer later. |
| */ |
| for (i = ctx->first_win; i < WINDOWS_NR; i++) |
| decon_disable_plane(crtc, &ctx->planes[i]); |
| |
| decon_swreset(ctx); |
| |
| exynos_drm_pipe_clk_enable(crtc, false); |
| |
| pm_runtime_put_sync(ctx->dev); |
| } |
| |
| static irqreturn_t decon_te_irq_handler(int irq, void *dev_id) |
| { |
| struct decon_context *ctx = dev_id; |
| |
| decon_set_bits(ctx, DECON_TRIGCON, TRIGCON_SWTRIGCMD, ~0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void decon_clear_channels(struct exynos_drm_crtc *crtc) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| int win, i, ret; |
| |
| for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { |
| ret = clk_prepare_enable(ctx->clks[i]); |
| if (ret < 0) |
| goto err; |
| } |
| |
| decon_shadow_protect(ctx, true); |
| for (win = 0; win < WINDOWS_NR; win++) |
| decon_set_bits(ctx, DECON_WINCONx(win), WINCONx_ENWIN_F, 0); |
| decon_shadow_protect(ctx, false); |
| |
| decon_set_bits(ctx, DECON_UPDATE, STANDALONE_UPDATE_F, ~0); |
| |
| /* TODO: wait for possible vsync */ |
| msleep(50); |
| |
| err: |
| while (--i >= 0) |
| clk_disable_unprepare(ctx->clks[i]); |
| } |
| |
| static enum drm_mode_status decon_mode_valid(struct exynos_drm_crtc *crtc, |
| const struct drm_display_mode *mode) |
| { |
| struct decon_context *ctx = crtc->ctx; |
| |
| ctx->irq = crtc->i80_mode ? ctx->irq_lcd_sys : ctx->irq_vsync; |
| |
| if (ctx->irq) |
| return MODE_OK; |
| |
| dev_info(ctx->dev, "Sink requires %s mode, but appropriate interrupt is not provided.\n", |
| crtc->i80_mode ? "command" : "video"); |
| |
| return MODE_BAD; |
| } |
| |
| static const struct exynos_drm_crtc_ops decon_crtc_ops = { |
| .atomic_enable = decon_atomic_enable, |
| .atomic_disable = decon_atomic_disable, |
| .enable_vblank = decon_enable_vblank, |
| .disable_vblank = decon_disable_vblank, |
| .atomic_begin = decon_atomic_begin, |
| .update_plane = decon_update_plane, |
| .disable_plane = decon_disable_plane, |
| .mode_valid = decon_mode_valid, |
| .atomic_flush = decon_atomic_flush, |
| }; |
| |
| static int decon_bind(struct device *dev, struct device *master, void *data) |
| { |
| struct decon_context *ctx = dev_get_drvdata(dev); |
| struct drm_device *drm_dev = data; |
| struct exynos_drm_plane *exynos_plane; |
| enum exynos_drm_output_type out_type; |
| unsigned int win; |
| int ret; |
| |
| ctx->drm_dev = drm_dev; |
| |
| for (win = ctx->first_win; win < WINDOWS_NR; win++) { |
| ctx->configs[win].pixel_formats = decon_formats; |
| ctx->configs[win].num_pixel_formats = ARRAY_SIZE(decon_formats); |
| ctx->configs[win].zpos = win - ctx->first_win; |
| ctx->configs[win].type = decon_win_types[win]; |
| ctx->configs[win].capabilities = capabilities[win]; |
| |
| ret = exynos_plane_init(drm_dev, &ctx->planes[win], win, |
| &ctx->configs[win]); |
| if (ret) |
| return ret; |
| } |
| |
| exynos_plane = &ctx->planes[PRIMARY_WIN]; |
| out_type = (ctx->out_type & IFTYPE_HDMI) ? EXYNOS_DISPLAY_TYPE_HDMI |
| : EXYNOS_DISPLAY_TYPE_LCD; |
| ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base, |
| out_type, &decon_crtc_ops, ctx); |
| if (IS_ERR(ctx->crtc)) |
| return PTR_ERR(ctx->crtc); |
| |
| decon_clear_channels(ctx->crtc); |
| |
| return exynos_drm_register_dma(drm_dev, dev, &ctx->dma_priv); |
| } |
| |
| static void decon_unbind(struct device *dev, struct device *master, void *data) |
| { |
| struct decon_context *ctx = dev_get_drvdata(dev); |
| |
| decon_atomic_disable(ctx->crtc); |
| |
| /* detach this sub driver from iommu mapping if supported. */ |
| exynos_drm_unregister_dma(ctx->drm_dev, ctx->dev, &ctx->dma_priv); |
| } |
| |
| static const struct component_ops decon_component_ops = { |
| .bind = decon_bind, |
| .unbind = decon_unbind, |
| }; |
| |
| static void decon_handle_vblank(struct decon_context *ctx) |
| { |
| u32 frm; |
| |
| spin_lock(&ctx->vblank_lock); |
| |
| frm = decon_get_frame_count(ctx, true); |
| |
| if (frm != ctx->frame_id) { |
| /* handle only if incremented, take care of wrap-around */ |
| if ((s32)(frm - ctx->frame_id) > 0) |
| drm_crtc_handle_vblank(&ctx->crtc->base); |
| ctx->frame_id = frm; |
| } |
| |
| spin_unlock(&ctx->vblank_lock); |
| } |
| |
| static irqreturn_t decon_irq_handler(int irq, void *dev_id) |
| { |
| struct decon_context *ctx = dev_id; |
| u32 val; |
| |
| val = readl(ctx->addr + DECON_VIDINTCON1); |
| val &= VIDINTCON1_INTFRMDONEPEND | VIDINTCON1_INTFRMPEND; |
| |
| if (val) { |
| writel(val, ctx->addr + DECON_VIDINTCON1); |
| if (ctx->out_type & IFTYPE_HDMI) { |
| val = readl(ctx->addr + DECON_VIDOUTCON0); |
| val &= VIDOUT_INTERLACE_EN_F | VIDOUT_INTERLACE_FIELD_F; |
| if (val == |
| (VIDOUT_INTERLACE_EN_F | VIDOUT_INTERLACE_FIELD_F)) |
| return IRQ_HANDLED; |
| } |
| decon_handle_vblank(ctx); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int exynos5433_decon_suspend(struct device *dev) |
| { |
| struct decon_context *ctx = dev_get_drvdata(dev); |
| int i = ARRAY_SIZE(decon_clks_name); |
| |
| while (--i >= 0) |
| clk_disable_unprepare(ctx->clks[i]); |
| |
| return 0; |
| } |
| |
| static int exynos5433_decon_resume(struct device *dev) |
| { |
| struct decon_context *ctx = dev_get_drvdata(dev); |
| int i, ret; |
| |
| for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { |
| ret = clk_prepare_enable(ctx->clks[i]); |
| if (ret < 0) |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| while (--i >= 0) |
| clk_disable_unprepare(ctx->clks[i]); |
| |
| return ret; |
| } |
| |
| static DEFINE_RUNTIME_DEV_PM_OPS(exynos5433_decon_pm_ops, |
| exynos5433_decon_suspend, |
| exynos5433_decon_resume, NULL); |
| |
| static const struct of_device_id exynos5433_decon_driver_dt_match[] = { |
| { |
| .compatible = "samsung,exynos5433-decon", |
| .data = (void *)I80_HW_TRG |
| }, |
| { |
| .compatible = "samsung,exynos5433-decon-tv", |
| .data = (void *)(I80_HW_TRG | IFTYPE_HDMI) |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos5433_decon_driver_dt_match); |
| |
| static int decon_conf_irq(struct decon_context *ctx, const char *name, |
| irq_handler_t handler, unsigned long int flags) |
| { |
| struct platform_device *pdev = to_platform_device(ctx->dev); |
| int ret, irq = platform_get_irq_byname(pdev, name); |
| |
| if (irq < 0) { |
| switch (irq) { |
| case -EPROBE_DEFER: |
| return irq; |
| case -ENODATA: |
| case -ENXIO: |
| return 0; |
| default: |
| dev_err(ctx->dev, "IRQ %s get failed, %d\n", name, irq); |
| return irq; |
| } |
| } |
| ret = devm_request_irq(ctx->dev, irq, handler, |
| flags | IRQF_NO_AUTOEN, "drm_decon", ctx); |
| if (ret < 0) { |
| dev_err(ctx->dev, "IRQ %s request failed\n", name); |
| return ret; |
| } |
| |
| return irq; |
| } |
| |
| static int exynos5433_decon_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct decon_context *ctx; |
| int ret; |
| int i; |
| |
| ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| ctx->dev = dev; |
| ctx->out_type = (unsigned long)of_device_get_match_data(dev); |
| spin_lock_init(&ctx->vblank_lock); |
| |
| if (ctx->out_type & IFTYPE_HDMI) |
| ctx->first_win = 1; |
| |
| for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) { |
| struct clk *clk; |
| |
| clk = devm_clk_get(ctx->dev, decon_clks_name[i]); |
| if (IS_ERR(clk)) |
| return PTR_ERR(clk); |
| |
| ctx->clks[i] = clk; |
| } |
| |
| ctx->addr = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(ctx->addr)) |
| return PTR_ERR(ctx->addr); |
| |
| ret = decon_conf_irq(ctx, "vsync", decon_irq_handler, 0); |
| if (ret < 0) |
| return ret; |
| ctx->irq_vsync = ret; |
| |
| ret = decon_conf_irq(ctx, "lcd_sys", decon_irq_handler, 0); |
| if (ret < 0) |
| return ret; |
| ctx->irq_lcd_sys = ret; |
| |
| ret = decon_conf_irq(ctx, "te", decon_te_irq_handler, |
| IRQF_TRIGGER_RISING); |
| if (ret < 0) |
| return ret; |
| if (ret) { |
| ctx->te_irq = ret; |
| ctx->out_type &= ~I80_HW_TRG; |
| } |
| |
| if (ctx->out_type & I80_HW_TRG) { |
| ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node, |
| "samsung,disp-sysreg"); |
| if (IS_ERR(ctx->sysreg)) { |
| dev_err(dev, "failed to get system register\n"); |
| return PTR_ERR(ctx->sysreg); |
| } |
| } |
| |
| platform_set_drvdata(pdev, ctx); |
| |
| pm_runtime_enable(dev); |
| |
| ret = component_add(dev, &decon_component_ops); |
| if (ret) |
| goto err_disable_pm_runtime; |
| |
| return 0; |
| |
| err_disable_pm_runtime: |
| pm_runtime_disable(dev); |
| |
| return ret; |
| } |
| |
| static void exynos5433_decon_remove(struct platform_device *pdev) |
| { |
| pm_runtime_disable(&pdev->dev); |
| |
| component_del(&pdev->dev, &decon_component_ops); |
| } |
| |
| struct platform_driver exynos5433_decon_driver = { |
| .probe = exynos5433_decon_probe, |
| .remove_new = exynos5433_decon_remove, |
| .driver = { |
| .name = "exynos5433-decon", |
| .pm = pm_ptr(&exynos5433_decon_pm_ops), |
| .of_match_table = exynos5433_decon_driver_dt_match, |
| }, |
| }; |