| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved. |
| */ |
| |
| #define pr_fmt(fmt) "[drm-dp] %s: " fmt, __func__ |
| |
| #include <drm/drm_print.h> |
| |
| #include "dp_reg.h" |
| #include "dp_link.h" |
| #include "dp_panel.h" |
| |
| #define DP_TEST_REQUEST_MASK 0x7F |
| |
| enum audio_sample_rate { |
| AUDIO_SAMPLE_RATE_32_KHZ = 0x00, |
| AUDIO_SAMPLE_RATE_44_1_KHZ = 0x01, |
| AUDIO_SAMPLE_RATE_48_KHZ = 0x02, |
| AUDIO_SAMPLE_RATE_88_2_KHZ = 0x03, |
| AUDIO_SAMPLE_RATE_96_KHZ = 0x04, |
| AUDIO_SAMPLE_RATE_176_4_KHZ = 0x05, |
| AUDIO_SAMPLE_RATE_192_KHZ = 0x06, |
| }; |
| |
| enum audio_pattern_type { |
| AUDIO_TEST_PATTERN_OPERATOR_DEFINED = 0x00, |
| AUDIO_TEST_PATTERN_SAWTOOTH = 0x01, |
| }; |
| |
| struct dp_link_request { |
| u32 test_requested; |
| u32 test_link_rate; |
| u32 test_lane_count; |
| }; |
| |
| struct dp_link_private { |
| u32 prev_sink_count; |
| struct device *dev; |
| struct drm_device *drm_dev; |
| struct drm_dp_aux *aux; |
| struct dp_link dp_link; |
| |
| struct dp_link_request request; |
| struct mutex psm_mutex; |
| u8 link_status[DP_LINK_STATUS_SIZE]; |
| }; |
| |
| static int dp_aux_link_power_up(struct drm_dp_aux *aux, |
| struct dp_link_info *link) |
| { |
| u8 value; |
| ssize_t len; |
| int i; |
| |
| if (link->revision < 0x11) |
| return 0; |
| |
| len = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value); |
| if (len < 0) |
| return len; |
| |
| value &= ~DP_SET_POWER_MASK; |
| value |= DP_SET_POWER_D0; |
| |
| /* retry for 1ms to give the sink time to wake up */ |
| for (i = 0; i < 3; i++) { |
| len = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value); |
| usleep_range(1000, 2000); |
| if (len == 1) |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int dp_aux_link_power_down(struct drm_dp_aux *aux, |
| struct dp_link_info *link) |
| { |
| u8 value; |
| int err; |
| |
| if (link->revision < 0x11) |
| return 0; |
| |
| err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value); |
| if (err < 0) |
| return err; |
| |
| value &= ~DP_SET_POWER_MASK; |
| value |= DP_SET_POWER_D3; |
| |
| err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| static int dp_link_get_period(struct dp_link_private *link, int const addr) |
| { |
| int ret = 0; |
| u8 data; |
| u32 const max_audio_period = 0xA; |
| |
| /* TEST_AUDIO_PERIOD_CH_XX */ |
| if (drm_dp_dpcd_readb(link->aux, addr, &data) < 0) { |
| DRM_ERROR("failed to read test_audio_period (0x%x)\n", addr); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| /* Period - Bits 3:0 */ |
| data = data & 0xF; |
| if ((int)data > max_audio_period) { |
| DRM_ERROR("invalid test_audio_period_ch_1 = 0x%x\n", data); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| ret = data; |
| exit: |
| return ret; |
| } |
| |
| static int dp_link_parse_audio_channel_period(struct dp_link_private *link) |
| { |
| int ret = 0; |
| struct dp_link_test_audio *req = &link->dp_link.test_audio; |
| |
| ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH1); |
| if (ret == -EINVAL) |
| goto exit; |
| |
| req->test_audio_period_ch_1 = ret; |
| drm_dbg_dp(link->drm_dev, "test_audio_period_ch_1 = 0x%x\n", ret); |
| |
| ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH2); |
| if (ret == -EINVAL) |
| goto exit; |
| |
| req->test_audio_period_ch_2 = ret; |
| drm_dbg_dp(link->drm_dev, "test_audio_period_ch_2 = 0x%x\n", ret); |
| |
| /* TEST_AUDIO_PERIOD_CH_3 (Byte 0x275) */ |
| ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH3); |
| if (ret == -EINVAL) |
| goto exit; |
| |
| req->test_audio_period_ch_3 = ret; |
| drm_dbg_dp(link->drm_dev, "test_audio_period_ch_3 = 0x%x\n", ret); |
| |
| ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH4); |
| if (ret == -EINVAL) |
| goto exit; |
| |
| req->test_audio_period_ch_4 = ret; |
| drm_dbg_dp(link->drm_dev, "test_audio_period_ch_4 = 0x%x\n", ret); |
| |
| ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH5); |
| if (ret == -EINVAL) |
| goto exit; |
| |
| req->test_audio_period_ch_5 = ret; |
| drm_dbg_dp(link->drm_dev, "test_audio_period_ch_5 = 0x%x\n", ret); |
| |
| ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH6); |
| if (ret == -EINVAL) |
| goto exit; |
| |
| req->test_audio_period_ch_6 = ret; |
| drm_dbg_dp(link->drm_dev, "test_audio_period_ch_6 = 0x%x\n", ret); |
| |
| ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH7); |
| if (ret == -EINVAL) |
| goto exit; |
| |
| req->test_audio_period_ch_7 = ret; |
| drm_dbg_dp(link->drm_dev, "test_audio_period_ch_7 = 0x%x\n", ret); |
| |
| ret = dp_link_get_period(link, DP_TEST_AUDIO_PERIOD_CH8); |
| if (ret == -EINVAL) |
| goto exit; |
| |
| req->test_audio_period_ch_8 = ret; |
| drm_dbg_dp(link->drm_dev, "test_audio_period_ch_8 = 0x%x\n", ret); |
| exit: |
| return ret; |
| } |
| |
| static int dp_link_parse_audio_pattern_type(struct dp_link_private *link) |
| { |
| int ret = 0; |
| u8 data; |
| ssize_t rlen; |
| int const max_audio_pattern_type = 0x1; |
| |
| rlen = drm_dp_dpcd_readb(link->aux, |
| DP_TEST_AUDIO_PATTERN_TYPE, &data); |
| if (rlen < 0) { |
| DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen); |
| return rlen; |
| } |
| |
| /* Audio Pattern Type - Bits 7:0 */ |
| if ((int)data > max_audio_pattern_type) { |
| DRM_ERROR("invalid audio pattern type = 0x%x\n", data); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| link->dp_link.test_audio.test_audio_pattern_type = data; |
| drm_dbg_dp(link->drm_dev, "audio pattern type = 0x%x\n", data); |
| exit: |
| return ret; |
| } |
| |
| static int dp_link_parse_audio_mode(struct dp_link_private *link) |
| { |
| int ret = 0; |
| u8 data; |
| ssize_t rlen; |
| int const max_audio_sampling_rate = 0x6; |
| int const max_audio_channel_count = 0x8; |
| int sampling_rate = 0x0; |
| int channel_count = 0x0; |
| |
| rlen = drm_dp_dpcd_readb(link->aux, DP_TEST_AUDIO_MODE, &data); |
| if (rlen < 0) { |
| DRM_ERROR("failed to read link audio mode. rlen=%zd\n", rlen); |
| return rlen; |
| } |
| |
| /* Sampling Rate - Bits 3:0 */ |
| sampling_rate = data & 0xF; |
| if (sampling_rate > max_audio_sampling_rate) { |
| DRM_ERROR("sampling rate (0x%x) greater than max (0x%x)\n", |
| sampling_rate, max_audio_sampling_rate); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| /* Channel Count - Bits 7:4 */ |
| channel_count = ((data & 0xF0) >> 4) + 1; |
| if (channel_count > max_audio_channel_count) { |
| DRM_ERROR("channel_count (0x%x) greater than max (0x%x)\n", |
| channel_count, max_audio_channel_count); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| link->dp_link.test_audio.test_audio_sampling_rate = sampling_rate; |
| link->dp_link.test_audio.test_audio_channel_count = channel_count; |
| drm_dbg_dp(link->drm_dev, |
| "sampling_rate = 0x%x, channel_count = 0x%x\n", |
| sampling_rate, channel_count); |
| exit: |
| return ret; |
| } |
| |
| static int dp_link_parse_audio_pattern_params(struct dp_link_private *link) |
| { |
| int ret = 0; |
| |
| ret = dp_link_parse_audio_mode(link); |
| if (ret) |
| goto exit; |
| |
| ret = dp_link_parse_audio_pattern_type(link); |
| if (ret) |
| goto exit; |
| |
| ret = dp_link_parse_audio_channel_period(link); |
| |
| exit: |
| return ret; |
| } |
| |
| static bool dp_link_is_video_pattern_valid(u32 pattern) |
| { |
| switch (pattern) { |
| case DP_NO_TEST_PATTERN: |
| case DP_COLOR_RAMP: |
| case DP_BLACK_AND_WHITE_VERTICAL_LINES: |
| case DP_COLOR_SQUARE: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| /** |
| * dp_link_is_bit_depth_valid() - validates the bit depth requested |
| * @tbd: bit depth requested by the sink |
| * |
| * Returns true if the requested bit depth is supported. |
| */ |
| static bool dp_link_is_bit_depth_valid(u32 tbd) |
| { |
| /* DP_TEST_VIDEO_PATTERN_NONE is treated as invalid */ |
| switch (tbd) { |
| case DP_TEST_BIT_DEPTH_6: |
| case DP_TEST_BIT_DEPTH_8: |
| case DP_TEST_BIT_DEPTH_10: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static int dp_link_parse_timing_params1(struct dp_link_private *link, |
| int addr, int len, u32 *val) |
| { |
| u8 bp[2]; |
| int rlen; |
| |
| if (len != 2) |
| return -EINVAL; |
| |
| /* Read the requested video link pattern (Byte 0x221). */ |
| rlen = drm_dp_dpcd_read(link->aux, addr, bp, len); |
| if (rlen < len) { |
| DRM_ERROR("failed to read 0x%x\n", addr); |
| return -EINVAL; |
| } |
| |
| *val = bp[1] | (bp[0] << 8); |
| |
| return 0; |
| } |
| |
| static int dp_link_parse_timing_params2(struct dp_link_private *link, |
| int addr, int len, |
| u32 *val1, u32 *val2) |
| { |
| u8 bp[2]; |
| int rlen; |
| |
| if (len != 2) |
| return -EINVAL; |
| |
| /* Read the requested video link pattern (Byte 0x221). */ |
| rlen = drm_dp_dpcd_read(link->aux, addr, bp, len); |
| if (rlen < len) { |
| DRM_ERROR("failed to read 0x%x\n", addr); |
| return -EINVAL; |
| } |
| |
| *val1 = (bp[0] & BIT(7)) >> 7; |
| *val2 = bp[1] | ((bp[0] & 0x7F) << 8); |
| |
| return 0; |
| } |
| |
| static int dp_link_parse_timing_params3(struct dp_link_private *link, |
| int addr, u32 *val) |
| { |
| u8 bp; |
| u32 len = 1; |
| int rlen; |
| |
| rlen = drm_dp_dpcd_read(link->aux, addr, &bp, len); |
| if (rlen < 1) { |
| DRM_ERROR("failed to read 0x%x\n", addr); |
| return -EINVAL; |
| } |
| *val = bp; |
| |
| return 0; |
| } |
| |
| /** |
| * dp_link_parse_video_pattern_params() - parses video pattern parameters from DPCD |
| * @link: Display Port Driver data |
| * |
| * Returns 0 if it successfully parses the video link pattern and the link |
| * bit depth requested by the sink and, and if the values parsed are valid. |
| */ |
| static int dp_link_parse_video_pattern_params(struct dp_link_private *link) |
| { |
| int ret = 0; |
| ssize_t rlen; |
| u8 bp; |
| |
| rlen = drm_dp_dpcd_readb(link->aux, DP_TEST_PATTERN, &bp); |
| if (rlen < 0) { |
| DRM_ERROR("failed to read link video pattern. rlen=%zd\n", |
| rlen); |
| return rlen; |
| } |
| |
| if (!dp_link_is_video_pattern_valid(bp)) { |
| DRM_ERROR("invalid link video pattern = 0x%x\n", bp); |
| ret = -EINVAL; |
| return ret; |
| } |
| |
| link->dp_link.test_video.test_video_pattern = bp; |
| |
| /* Read the requested color bit depth and dynamic range (Byte 0x232) */ |
| rlen = drm_dp_dpcd_readb(link->aux, DP_TEST_MISC0, &bp); |
| if (rlen < 0) { |
| DRM_ERROR("failed to read link bit depth. rlen=%zd\n", rlen); |
| return rlen; |
| } |
| |
| /* Dynamic Range */ |
| link->dp_link.test_video.test_dyn_range = |
| (bp & DP_TEST_DYNAMIC_RANGE_CEA); |
| |
| /* Color bit depth */ |
| bp &= DP_TEST_BIT_DEPTH_MASK; |
| if (!dp_link_is_bit_depth_valid(bp)) { |
| DRM_ERROR("invalid link bit depth = 0x%x\n", bp); |
| ret = -EINVAL; |
| return ret; |
| } |
| |
| link->dp_link.test_video.test_bit_depth = bp; |
| |
| /* resolution timing params */ |
| ret = dp_link_parse_timing_params1(link, DP_TEST_H_TOTAL_HI, 2, |
| &link->dp_link.test_video.test_h_total); |
| if (ret) { |
| DRM_ERROR("failed to parse test_htotal(DP_TEST_H_TOTAL_HI)\n"); |
| return ret; |
| } |
| |
| ret = dp_link_parse_timing_params1(link, DP_TEST_V_TOTAL_HI, 2, |
| &link->dp_link.test_video.test_v_total); |
| if (ret) { |
| DRM_ERROR("failed to parse test_v_total(DP_TEST_V_TOTAL_HI)\n"); |
| return ret; |
| } |
| |
| ret = dp_link_parse_timing_params1(link, DP_TEST_H_START_HI, 2, |
| &link->dp_link.test_video.test_h_start); |
| if (ret) { |
| DRM_ERROR("failed to parse test_h_start(DP_TEST_H_START_HI)\n"); |
| return ret; |
| } |
| |
| ret = dp_link_parse_timing_params1(link, DP_TEST_V_START_HI, 2, |
| &link->dp_link.test_video.test_v_start); |
| if (ret) { |
| DRM_ERROR("failed to parse test_v_start(DP_TEST_V_START_HI)\n"); |
| return ret; |
| } |
| |
| ret = dp_link_parse_timing_params2(link, DP_TEST_HSYNC_HI, 2, |
| &link->dp_link.test_video.test_hsync_pol, |
| &link->dp_link.test_video.test_hsync_width); |
| if (ret) { |
| DRM_ERROR("failed to parse (DP_TEST_HSYNC_HI)\n"); |
| return ret; |
| } |
| |
| ret = dp_link_parse_timing_params2(link, DP_TEST_VSYNC_HI, 2, |
| &link->dp_link.test_video.test_vsync_pol, |
| &link->dp_link.test_video.test_vsync_width); |
| if (ret) { |
| DRM_ERROR("failed to parse (DP_TEST_VSYNC_HI)\n"); |
| return ret; |
| } |
| |
| ret = dp_link_parse_timing_params1(link, DP_TEST_H_WIDTH_HI, 2, |
| &link->dp_link.test_video.test_h_width); |
| if (ret) { |
| DRM_ERROR("failed to parse test_h_width(DP_TEST_H_WIDTH_HI)\n"); |
| return ret; |
| } |
| |
| ret = dp_link_parse_timing_params1(link, DP_TEST_V_HEIGHT_HI, 2, |
| &link->dp_link.test_video.test_v_height); |
| if (ret) { |
| DRM_ERROR("failed to parse test_v_height\n"); |
| return ret; |
| } |
| |
| ret = dp_link_parse_timing_params3(link, DP_TEST_MISC1, |
| &link->dp_link.test_video.test_rr_d); |
| link->dp_link.test_video.test_rr_d &= DP_TEST_REFRESH_DENOMINATOR; |
| if (ret) { |
| DRM_ERROR("failed to parse test_rr_d (DP_TEST_MISC1)\n"); |
| return ret; |
| } |
| |
| ret = dp_link_parse_timing_params3(link, DP_TEST_REFRESH_RATE_NUMERATOR, |
| &link->dp_link.test_video.test_rr_n); |
| if (ret) { |
| DRM_ERROR("failed to parse test_rr_n\n"); |
| return ret; |
| } |
| |
| drm_dbg_dp(link->drm_dev, |
| "link video pattern = 0x%x\n" |
| "link dynamic range = 0x%x\n" |
| "link bit depth = 0x%x\n" |
| "TEST_H_TOTAL = %d, TEST_V_TOTAL = %d\n" |
| "TEST_H_START = %d, TEST_V_START = %d\n" |
| "TEST_HSYNC_POL = %d\n" |
| "TEST_HSYNC_WIDTH = %d\n" |
| "TEST_VSYNC_POL = %d\n" |
| "TEST_VSYNC_WIDTH = %d\n" |
| "TEST_H_WIDTH = %d\n" |
| "TEST_V_HEIGHT = %d\n" |
| "TEST_REFRESH_DENOMINATOR = %d\n" |
| "TEST_REFRESH_NUMERATOR = %d\n", |
| link->dp_link.test_video.test_video_pattern, |
| link->dp_link.test_video.test_dyn_range, |
| link->dp_link.test_video.test_bit_depth, |
| link->dp_link.test_video.test_h_total, |
| link->dp_link.test_video.test_v_total, |
| link->dp_link.test_video.test_h_start, |
| link->dp_link.test_video.test_v_start, |
| link->dp_link.test_video.test_hsync_pol, |
| link->dp_link.test_video.test_hsync_width, |
| link->dp_link.test_video.test_vsync_pol, |
| link->dp_link.test_video.test_vsync_width, |
| link->dp_link.test_video.test_h_width, |
| link->dp_link.test_video.test_v_height, |
| link->dp_link.test_video.test_rr_d, |
| link->dp_link.test_video.test_rr_n); |
| |
| return ret; |
| } |
| |
| /** |
| * dp_link_parse_link_training_params() - parses link training parameters from |
| * DPCD |
| * @link: Display Port Driver data |
| * |
| * Returns 0 if it successfully parses the link rate (Byte 0x219) and lane |
| * count (Byte 0x220), and if these values parse are valid. |
| */ |
| static int dp_link_parse_link_training_params(struct dp_link_private *link) |
| { |
| u8 bp; |
| ssize_t rlen; |
| |
| rlen = drm_dp_dpcd_readb(link->aux, DP_TEST_LINK_RATE, &bp); |
| if (rlen < 0) { |
| DRM_ERROR("failed to read link rate. rlen=%zd\n", rlen); |
| return rlen; |
| } |
| |
| if (!is_link_rate_valid(bp)) { |
| DRM_ERROR("invalid link rate = 0x%x\n", bp); |
| return -EINVAL; |
| } |
| |
| link->request.test_link_rate = bp; |
| drm_dbg_dp(link->drm_dev, "link rate = 0x%x\n", |
| link->request.test_link_rate); |
| |
| rlen = drm_dp_dpcd_readb(link->aux, DP_TEST_LANE_COUNT, &bp); |
| if (rlen < 0) { |
| DRM_ERROR("failed to read lane count. rlen=%zd\n", rlen); |
| return rlen; |
| } |
| bp &= DP_MAX_LANE_COUNT_MASK; |
| |
| if (!is_lane_count_valid(bp)) { |
| DRM_ERROR("invalid lane count = 0x%x\n", bp); |
| return -EINVAL; |
| } |
| |
| link->request.test_lane_count = bp; |
| drm_dbg_dp(link->drm_dev, "lane count = 0x%x\n", |
| link->request.test_lane_count); |
| return 0; |
| } |
| |
| /** |
| * dp_link_parse_phy_test_params() - parses the phy link parameters |
| * @link: Display Port Driver data |
| * |
| * Parses the DPCD (Byte 0x248) for the DP PHY link pattern that is being |
| * requested. |
| */ |
| static int dp_link_parse_phy_test_params(struct dp_link_private *link) |
| { |
| u8 data; |
| ssize_t rlen; |
| |
| rlen = drm_dp_dpcd_readb(link->aux, DP_PHY_TEST_PATTERN, |
| &data); |
| if (rlen < 0) { |
| DRM_ERROR("failed to read phy link pattern. rlen=%zd\n", rlen); |
| return rlen; |
| } |
| |
| link->dp_link.phy_params.phy_test_pattern_sel = data & 0x07; |
| |
| drm_dbg_dp(link->drm_dev, "phy_test_pattern_sel = 0x%x\n", data); |
| |
| switch (data) { |
| case DP_PHY_TEST_PATTERN_SEL_MASK: |
| case DP_PHY_TEST_PATTERN_NONE: |
| case DP_PHY_TEST_PATTERN_D10_2: |
| case DP_PHY_TEST_PATTERN_ERROR_COUNT: |
| case DP_PHY_TEST_PATTERN_PRBS7: |
| case DP_PHY_TEST_PATTERN_80BIT_CUSTOM: |
| case DP_PHY_TEST_PATTERN_CP2520: |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| /** |
| * dp_link_is_video_audio_test_requested() - checks for audio/video link request |
| * @link: link requested by the sink |
| * |
| * Returns true if the requested link is a permitted audio/video link. |
| */ |
| static bool dp_link_is_video_audio_test_requested(u32 link) |
| { |
| u8 video_audio_test = (DP_TEST_LINK_VIDEO_PATTERN | |
| DP_TEST_LINK_AUDIO_PATTERN | |
| DP_TEST_LINK_AUDIO_DISABLED_VIDEO); |
| |
| return ((link & video_audio_test) && |
| !(link & ~video_audio_test)); |
| } |
| |
| /** |
| * dp_link_parse_request() - parses link request parameters from sink |
| * @link: Display Port Driver data |
| * |
| * Parses the DPCD to check if an automated link is requested (Byte 0x201), |
| * and what type of link automation is being requested (Byte 0x218). |
| */ |
| static int dp_link_parse_request(struct dp_link_private *link) |
| { |
| int ret = 0; |
| u8 data; |
| ssize_t rlen; |
| |
| /** |
| * Read the device service IRQ vector (Byte 0x201) to determine |
| * whether an automated link has been requested by the sink. |
| */ |
| rlen = drm_dp_dpcd_readb(link->aux, |
| DP_DEVICE_SERVICE_IRQ_VECTOR, &data); |
| if (rlen < 0) { |
| DRM_ERROR("aux read failed. rlen=%zd\n", rlen); |
| return rlen; |
| } |
| |
| drm_dbg_dp(link->drm_dev, "device service irq vector = 0x%x\n", data); |
| |
| if (!(data & DP_AUTOMATED_TEST_REQUEST)) { |
| drm_dbg_dp(link->drm_dev, "no test requested\n"); |
| return 0; |
| } |
| |
| /** |
| * Read the link request byte (Byte 0x218) to determine what type |
| * of automated link has been requested by the sink. |
| */ |
| rlen = drm_dp_dpcd_readb(link->aux, DP_TEST_REQUEST, &data); |
| if (rlen < 0) { |
| DRM_ERROR("aux read failed. rlen=%zd\n", rlen); |
| return rlen; |
| } |
| |
| if (!data || (data == DP_TEST_LINK_FAUX_PATTERN)) { |
| drm_dbg_dp(link->drm_dev, "link 0x%x not supported\n", data); |
| goto end; |
| } |
| |
| drm_dbg_dp(link->drm_dev, "Test:(0x%x) requested\n", data); |
| link->request.test_requested = data; |
| if (link->request.test_requested == DP_TEST_LINK_PHY_TEST_PATTERN) { |
| ret = dp_link_parse_phy_test_params(link); |
| if (ret) |
| goto end; |
| ret = dp_link_parse_link_training_params(link); |
| if (ret) |
| goto end; |
| } |
| |
| if (link->request.test_requested == DP_TEST_LINK_TRAINING) { |
| ret = dp_link_parse_link_training_params(link); |
| if (ret) |
| goto end; |
| } |
| |
| if (dp_link_is_video_audio_test_requested( |
| link->request.test_requested)) { |
| ret = dp_link_parse_video_pattern_params(link); |
| if (ret) |
| goto end; |
| |
| ret = dp_link_parse_audio_pattern_params(link); |
| } |
| end: |
| /* |
| * Send a DP_TEST_ACK if all link parameters are valid, otherwise send |
| * a DP_TEST_NAK. |
| */ |
| if (ret) { |
| link->dp_link.test_response = DP_TEST_NAK; |
| } else { |
| if (link->request.test_requested != DP_TEST_LINK_EDID_READ) |
| link->dp_link.test_response = DP_TEST_ACK; |
| else |
| link->dp_link.test_response = |
| DP_TEST_EDID_CHECKSUM_WRITE; |
| } |
| |
| return ret; |
| } |
| |
| static int dp_link_parse_sink_status_field(struct dp_link_private *link) |
| { |
| int len; |
| |
| link->prev_sink_count = link->dp_link.sink_count; |
| len = drm_dp_read_sink_count(link->aux); |
| if (len < 0) { |
| DRM_ERROR("DP parse sink count failed\n"); |
| return len; |
| } |
| link->dp_link.sink_count = len; |
| |
| len = drm_dp_dpcd_read_link_status(link->aux, |
| link->link_status); |
| if (len < DP_LINK_STATUS_SIZE) { |
| DRM_ERROR("DP link status read failed\n"); |
| return len; |
| } |
| |
| return dp_link_parse_request(link); |
| } |
| |
| /** |
| * dp_link_process_link_training_request() - processes new training requests |
| * @link: Display Port link data |
| * |
| * This function will handle new link training requests that are initiated by |
| * the sink. In particular, it will update the requested lane count and link |
| * rate, and then trigger the link retraining procedure. |
| * |
| * The function will return 0 if a link training request has been processed, |
| * otherwise it will return -EINVAL. |
| */ |
| static int dp_link_process_link_training_request(struct dp_link_private *link) |
| { |
| if (link->request.test_requested != DP_TEST_LINK_TRAINING) |
| return -EINVAL; |
| |
| drm_dbg_dp(link->drm_dev, |
| "Test:0x%x link rate = 0x%x, lane count = 0x%x\n", |
| DP_TEST_LINK_TRAINING, |
| link->request.test_link_rate, |
| link->request.test_lane_count); |
| |
| link->dp_link.link_params.num_lanes = link->request.test_lane_count; |
| link->dp_link.link_params.rate = |
| drm_dp_bw_code_to_link_rate(link->request.test_link_rate); |
| |
| return 0; |
| } |
| |
| bool dp_link_send_test_response(struct dp_link *dp_link) |
| { |
| struct dp_link_private *link = NULL; |
| int ret = 0; |
| |
| if (!dp_link) { |
| DRM_ERROR("invalid input\n"); |
| return false; |
| } |
| |
| link = container_of(dp_link, struct dp_link_private, dp_link); |
| |
| ret = drm_dp_dpcd_writeb(link->aux, DP_TEST_RESPONSE, |
| dp_link->test_response); |
| |
| return ret == 1; |
| } |
| |
| int dp_link_psm_config(struct dp_link *dp_link, |
| struct dp_link_info *link_info, bool enable) |
| { |
| struct dp_link_private *link = NULL; |
| int ret = 0; |
| |
| if (!dp_link) { |
| DRM_ERROR("invalid params\n"); |
| return -EINVAL; |
| } |
| |
| link = container_of(dp_link, struct dp_link_private, dp_link); |
| |
| mutex_lock(&link->psm_mutex); |
| if (enable) |
| ret = dp_aux_link_power_down(link->aux, link_info); |
| else |
| ret = dp_aux_link_power_up(link->aux, link_info); |
| |
| if (ret) |
| DRM_ERROR("Failed to %s low power mode\n", enable ? |
| "enter" : "exit"); |
| else |
| dp_link->psm_enabled = enable; |
| |
| mutex_unlock(&link->psm_mutex); |
| return ret; |
| } |
| |
| bool dp_link_send_edid_checksum(struct dp_link *dp_link, u8 checksum) |
| { |
| struct dp_link_private *link = NULL; |
| int ret = 0; |
| |
| if (!dp_link) { |
| DRM_ERROR("invalid input\n"); |
| return false; |
| } |
| |
| link = container_of(dp_link, struct dp_link_private, dp_link); |
| |
| ret = drm_dp_dpcd_writeb(link->aux, DP_TEST_EDID_CHECKSUM, |
| checksum); |
| return ret == 1; |
| } |
| |
| static void dp_link_parse_vx_px(struct dp_link_private *link) |
| { |
| drm_dbg_dp(link->drm_dev, "vx: 0=%d, 1=%d, 2=%d, 3=%d\n", |
| drm_dp_get_adjust_request_voltage(link->link_status, 0), |
| drm_dp_get_adjust_request_voltage(link->link_status, 1), |
| drm_dp_get_adjust_request_voltage(link->link_status, 2), |
| drm_dp_get_adjust_request_voltage(link->link_status, 3)); |
| |
| drm_dbg_dp(link->drm_dev, "px: 0=%d, 1=%d, 2=%d, 3=%d\n", |
| drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0), |
| drm_dp_get_adjust_request_pre_emphasis(link->link_status, 1), |
| drm_dp_get_adjust_request_pre_emphasis(link->link_status, 2), |
| drm_dp_get_adjust_request_pre_emphasis(link->link_status, 3)); |
| |
| /** |
| * Update the voltage and pre-emphasis levels as per DPCD request |
| * vector. |
| */ |
| drm_dbg_dp(link->drm_dev, |
| "Current: v_level = 0x%x, p_level = 0x%x\n", |
| link->dp_link.phy_params.v_level, |
| link->dp_link.phy_params.p_level); |
| link->dp_link.phy_params.v_level = |
| drm_dp_get_adjust_request_voltage(link->link_status, 0); |
| link->dp_link.phy_params.p_level = |
| drm_dp_get_adjust_request_pre_emphasis(link->link_status, 0); |
| |
| link->dp_link.phy_params.p_level >>= DP_TRAIN_PRE_EMPHASIS_SHIFT; |
| |
| drm_dbg_dp(link->drm_dev, |
| "Requested: v_level = 0x%x, p_level = 0x%x\n", |
| link->dp_link.phy_params.v_level, |
| link->dp_link.phy_params.p_level); |
| } |
| |
| /** |
| * dp_link_process_phy_test_pattern_request() - process new phy link requests |
| * @link: Display Port Driver data |
| * |
| * This function will handle new phy link pattern requests that are initiated |
| * by the sink. The function will return 0 if a phy link pattern has been |
| * processed, otherwise it will return -EINVAL. |
| */ |
| static int dp_link_process_phy_test_pattern_request( |
| struct dp_link_private *link) |
| { |
| if (!(link->request.test_requested & DP_TEST_LINK_PHY_TEST_PATTERN)) { |
| drm_dbg_dp(link->drm_dev, "no phy test\n"); |
| return -EINVAL; |
| } |
| |
| if (!is_link_rate_valid(link->request.test_link_rate) || |
| !is_lane_count_valid(link->request.test_lane_count)) { |
| DRM_ERROR("Invalid: link rate = 0x%x,lane count = 0x%x\n", |
| link->request.test_link_rate, |
| link->request.test_lane_count); |
| return -EINVAL; |
| } |
| |
| drm_dbg_dp(link->drm_dev, |
| "Current: rate = 0x%x, lane count = 0x%x\n", |
| link->dp_link.link_params.rate, |
| link->dp_link.link_params.num_lanes); |
| |
| drm_dbg_dp(link->drm_dev, |
| "Requested: rate = 0x%x, lane count = 0x%x\n", |
| link->request.test_link_rate, |
| link->request.test_lane_count); |
| |
| link->dp_link.link_params.num_lanes = link->request.test_lane_count; |
| link->dp_link.link_params.rate = |
| drm_dp_bw_code_to_link_rate(link->request.test_link_rate); |
| |
| dp_link_parse_vx_px(link); |
| |
| return 0; |
| } |
| |
| static bool dp_link_read_psr_error_status(struct dp_link_private *link) |
| { |
| u8 status; |
| |
| drm_dp_dpcd_read(link->aux, DP_PSR_ERROR_STATUS, &status, 1); |
| |
| if (status & DP_PSR_LINK_CRC_ERROR) |
| DRM_ERROR("PSR LINK CRC ERROR\n"); |
| else if (status & DP_PSR_RFB_STORAGE_ERROR) |
| DRM_ERROR("PSR RFB STORAGE ERROR\n"); |
| else if (status & DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR) |
| DRM_ERROR("PSR VSC SDP UNCORRECTABLE ERROR\n"); |
| else |
| return false; |
| |
| return true; |
| } |
| |
| static bool dp_link_psr_capability_changed(struct dp_link_private *link) |
| { |
| u8 status; |
| |
| drm_dp_dpcd_read(link->aux, DP_PSR_ESI, &status, 1); |
| |
| if (status & DP_PSR_CAPS_CHANGE) { |
| drm_dbg_dp(link->drm_dev, "PSR Capability Change\n"); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static u8 get_link_status(const u8 link_status[DP_LINK_STATUS_SIZE], int r) |
| { |
| return link_status[r - DP_LANE0_1_STATUS]; |
| } |
| |
| /** |
| * dp_link_process_link_status_update() - processes link status updates |
| * @link: Display Port link module data |
| * |
| * This function will check for changes in the link status, e.g. clock |
| * recovery done on all lanes, and trigger link training if there is a |
| * failure/error on the link. |
| * |
| * The function will return 0 if the a link status update has been processed, |
| * otherwise it will return -EINVAL. |
| */ |
| static int dp_link_process_link_status_update(struct dp_link_private *link) |
| { |
| bool channel_eq_done = drm_dp_channel_eq_ok(link->link_status, |
| link->dp_link.link_params.num_lanes); |
| |
| bool clock_recovery_done = drm_dp_clock_recovery_ok(link->link_status, |
| link->dp_link.link_params.num_lanes); |
| |
| drm_dbg_dp(link->drm_dev, |
| "channel_eq_done = %d, clock_recovery_done = %d\n", |
| channel_eq_done, clock_recovery_done); |
| |
| if (channel_eq_done && clock_recovery_done) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /** |
| * dp_link_process_ds_port_status_change() - process port status changes |
| * @link: Display Port Driver data |
| * |
| * This function will handle downstream port updates that are initiated by |
| * the sink. If the downstream port status has changed, the EDID is read via |
| * AUX. |
| * |
| * The function will return 0 if a downstream port update has been |
| * processed, otherwise it will return -EINVAL. |
| */ |
| static int dp_link_process_ds_port_status_change(struct dp_link_private *link) |
| { |
| if (get_link_status(link->link_status, DP_LANE_ALIGN_STATUS_UPDATED) & |
| DP_DOWNSTREAM_PORT_STATUS_CHANGED) |
| goto reset; |
| |
| if (link->prev_sink_count == link->dp_link.sink_count) |
| return -EINVAL; |
| |
| reset: |
| /* reset prev_sink_count */ |
| link->prev_sink_count = link->dp_link.sink_count; |
| |
| return 0; |
| } |
| |
| static bool dp_link_is_video_pattern_requested(struct dp_link_private *link) |
| { |
| return (link->request.test_requested & DP_TEST_LINK_VIDEO_PATTERN) |
| && !(link->request.test_requested & |
| DP_TEST_LINK_AUDIO_DISABLED_VIDEO); |
| } |
| |
| static bool dp_link_is_audio_pattern_requested(struct dp_link_private *link) |
| { |
| return (link->request.test_requested & DP_TEST_LINK_AUDIO_PATTERN); |
| } |
| |
| static void dp_link_reset_data(struct dp_link_private *link) |
| { |
| link->request = (const struct dp_link_request){ 0 }; |
| link->dp_link.test_video = (const struct dp_link_test_video){ 0 }; |
| link->dp_link.test_video.test_bit_depth = DP_TEST_BIT_DEPTH_UNKNOWN; |
| link->dp_link.test_audio = (const struct dp_link_test_audio){ 0 }; |
| link->dp_link.phy_params.phy_test_pattern_sel = 0; |
| link->dp_link.sink_request = 0; |
| link->dp_link.test_response = 0; |
| } |
| |
| /** |
| * dp_link_process_request() - handle HPD IRQ transition to HIGH |
| * @dp_link: pointer to link module data |
| * |
| * This function will handle the HPD IRQ state transitions from LOW to HIGH |
| * (including cases when there are back to back HPD IRQ HIGH) indicating |
| * the start of a new link training request or sink status update. |
| */ |
| int dp_link_process_request(struct dp_link *dp_link) |
| { |
| int ret = 0; |
| struct dp_link_private *link; |
| |
| if (!dp_link) { |
| DRM_ERROR("invalid input\n"); |
| return -EINVAL; |
| } |
| |
| link = container_of(dp_link, struct dp_link_private, dp_link); |
| |
| dp_link_reset_data(link); |
| |
| ret = dp_link_parse_sink_status_field(link); |
| if (ret) |
| return ret; |
| |
| if (link->request.test_requested == DP_TEST_LINK_EDID_READ) { |
| dp_link->sink_request |= DP_TEST_LINK_EDID_READ; |
| } else if (!dp_link_process_ds_port_status_change(link)) { |
| dp_link->sink_request |= DS_PORT_STATUS_CHANGED; |
| } else if (!dp_link_process_link_training_request(link)) { |
| dp_link->sink_request |= DP_TEST_LINK_TRAINING; |
| } else if (!dp_link_process_phy_test_pattern_request(link)) { |
| dp_link->sink_request |= DP_TEST_LINK_PHY_TEST_PATTERN; |
| } else if (dp_link_read_psr_error_status(link)) { |
| DRM_ERROR("PSR IRQ_HPD received\n"); |
| } else if (dp_link_psr_capability_changed(link)) { |
| drm_dbg_dp(link->drm_dev, "PSR Capability changed\n"); |
| } else { |
| ret = dp_link_process_link_status_update(link); |
| if (!ret) { |
| dp_link->sink_request |= DP_LINK_STATUS_UPDATED; |
| } else { |
| if (dp_link_is_video_pattern_requested(link)) { |
| ret = 0; |
| dp_link->sink_request |= DP_TEST_LINK_VIDEO_PATTERN; |
| } |
| if (dp_link_is_audio_pattern_requested(link)) { |
| dp_link->sink_request |= DP_TEST_LINK_AUDIO_PATTERN; |
| ret = -EINVAL; |
| } |
| } |
| } |
| |
| drm_dbg_dp(link->drm_dev, "sink request=%#x\n", |
| dp_link->sink_request); |
| return ret; |
| } |
| |
| int dp_link_get_colorimetry_config(struct dp_link *dp_link) |
| { |
| u32 cc = DP_MISC0_COLORIMERY_CFG_LEGACY_RGB; |
| struct dp_link_private *link; |
| |
| if (!dp_link) { |
| DRM_ERROR("invalid input\n"); |
| return -EINVAL; |
| } |
| |
| link = container_of(dp_link, struct dp_link_private, dp_link); |
| |
| /* |
| * Unless a video pattern CTS test is ongoing, use RGB_VESA |
| * Only RGB_VESA and RGB_CEA supported for now |
| */ |
| if (dp_link_is_video_pattern_requested(link)) { |
| if (link->dp_link.test_video.test_dyn_range & |
| DP_TEST_DYNAMIC_RANGE_CEA) |
| cc = DP_MISC0_COLORIMERY_CFG_CEA_RGB; |
| } |
| |
| return cc; |
| } |
| |
| int dp_link_adjust_levels(struct dp_link *dp_link, u8 *link_status) |
| { |
| int i; |
| int v_max = 0, p_max = 0; |
| struct dp_link_private *link; |
| |
| if (!dp_link) { |
| DRM_ERROR("invalid input\n"); |
| return -EINVAL; |
| } |
| |
| link = container_of(dp_link, struct dp_link_private, dp_link); |
| |
| /* use the max level across lanes */ |
| for (i = 0; i < dp_link->link_params.num_lanes; i++) { |
| u8 data_v = drm_dp_get_adjust_request_voltage(link_status, i); |
| u8 data_p = drm_dp_get_adjust_request_pre_emphasis(link_status, |
| i); |
| drm_dbg_dp(link->drm_dev, |
| "lane=%d req_vol_swing=%d req_pre_emphasis=%d\n", |
| i, data_v, data_p); |
| if (v_max < data_v) |
| v_max = data_v; |
| if (p_max < data_p) |
| p_max = data_p; |
| } |
| |
| dp_link->phy_params.v_level = v_max >> DP_TRAIN_VOLTAGE_SWING_SHIFT; |
| dp_link->phy_params.p_level = p_max >> DP_TRAIN_PRE_EMPHASIS_SHIFT; |
| |
| /** |
| * Adjust the voltage swing and pre-emphasis level combination to within |
| * the allowable range. |
| */ |
| if (dp_link->phy_params.v_level > DP_TRAIN_VOLTAGE_SWING_MAX) { |
| drm_dbg_dp(link->drm_dev, |
| "Requested vSwingLevel=%d, change to %d\n", |
| dp_link->phy_params.v_level, |
| DP_TRAIN_VOLTAGE_SWING_MAX); |
| dp_link->phy_params.v_level = DP_TRAIN_VOLTAGE_SWING_MAX; |
| } |
| |
| if (dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_MAX) { |
| drm_dbg_dp(link->drm_dev, |
| "Requested preEmphasisLevel=%d, change to %d\n", |
| dp_link->phy_params.p_level, |
| DP_TRAIN_PRE_EMPHASIS_MAX); |
| dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_MAX; |
| } |
| |
| if ((dp_link->phy_params.p_level > DP_TRAIN_PRE_EMPHASIS_LVL_1) |
| && (dp_link->phy_params.v_level == |
| DP_TRAIN_VOLTAGE_SWING_LVL_2)) { |
| drm_dbg_dp(link->drm_dev, |
| "Requested preEmphasisLevel=%d, change to %d\n", |
| dp_link->phy_params.p_level, |
| DP_TRAIN_PRE_EMPHASIS_LVL_1); |
| dp_link->phy_params.p_level = DP_TRAIN_PRE_EMPHASIS_LVL_1; |
| } |
| |
| drm_dbg_dp(link->drm_dev, "adjusted: v_level=%d, p_level=%d\n", |
| dp_link->phy_params.v_level, dp_link->phy_params.p_level); |
| |
| return 0; |
| } |
| |
| void dp_link_reset_phy_params_vx_px(struct dp_link *dp_link) |
| { |
| dp_link->phy_params.v_level = 0; |
| dp_link->phy_params.p_level = 0; |
| } |
| |
| u32 dp_link_get_test_bits_depth(struct dp_link *dp_link, u32 bpp) |
| { |
| u32 tbd; |
| struct dp_link_private *link; |
| |
| link = container_of(dp_link, struct dp_link_private, dp_link); |
| |
| /* |
| * Few simplistic rules and assumptions made here: |
| * 1. Test bit depth is bit depth per color component |
| * 2. Assume 3 color components |
| */ |
| switch (bpp) { |
| case 18: |
| tbd = DP_TEST_BIT_DEPTH_6; |
| break; |
| case 24: |
| tbd = DP_TEST_BIT_DEPTH_8; |
| break; |
| case 30: |
| tbd = DP_TEST_BIT_DEPTH_10; |
| break; |
| default: |
| drm_dbg_dp(link->drm_dev, "bpp=%d not supported, use bpc=8\n", |
| bpp); |
| tbd = DP_TEST_BIT_DEPTH_8; |
| break; |
| } |
| |
| tbd = (tbd >> DP_TEST_BIT_DEPTH_SHIFT); |
| |
| return tbd; |
| } |
| |
| struct dp_link *dp_link_get(struct device *dev, struct drm_dp_aux *aux) |
| { |
| struct dp_link_private *link; |
| struct dp_link *dp_link; |
| |
| if (!dev || !aux) { |
| DRM_ERROR("invalid input\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| link = devm_kzalloc(dev, sizeof(*link), GFP_KERNEL); |
| if (!link) |
| return ERR_PTR(-ENOMEM); |
| |
| link->dev = dev; |
| link->aux = aux; |
| |
| mutex_init(&link->psm_mutex); |
| dp_link = &link->dp_link; |
| |
| return dp_link; |
| } |