| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2013 Red Hat |
| * Author: Rob Clark <robdclark@gmail.com> |
| */ |
| |
| #include "msm_gpu.h" |
| #include "msm_gpu_trace.h" |
| |
| #include <linux/devfreq.h> |
| #include <linux/devfreq_cooling.h> |
| #include <linux/math64.h> |
| #include <linux/units.h> |
| |
| /* |
| * Power Management: |
| */ |
| |
| static int msm_devfreq_target(struct device *dev, unsigned long *freq, |
| u32 flags) |
| { |
| struct msm_gpu *gpu = dev_to_gpu(dev); |
| struct msm_gpu_devfreq *df = &gpu->devfreq; |
| struct dev_pm_opp *opp; |
| |
| /* |
| * Note that devfreq_recommended_opp() can modify the freq |
| * to something that actually is in the opp table: |
| */ |
| opp = devfreq_recommended_opp(dev, freq, flags); |
| if (IS_ERR(opp)) |
| return PTR_ERR(opp); |
| |
| trace_msm_gpu_freq_change(dev_pm_opp_get_freq(opp)); |
| |
| /* |
| * If the GPU is idle, devfreq is not aware, so just stash |
| * the new target freq (to use when we return to active) |
| */ |
| if (df->idle_freq) { |
| df->idle_freq = *freq; |
| dev_pm_opp_put(opp); |
| return 0; |
| } |
| |
| if (gpu->funcs->gpu_set_freq) { |
| mutex_lock(&df->lock); |
| gpu->funcs->gpu_set_freq(gpu, opp, df->suspended); |
| mutex_unlock(&df->lock); |
| } else { |
| dev_pm_opp_set_rate(dev, *freq); |
| } |
| |
| dev_pm_opp_put(opp); |
| |
| return 0; |
| } |
| |
| static unsigned long get_freq(struct msm_gpu *gpu) |
| { |
| struct msm_gpu_devfreq *df = &gpu->devfreq; |
| |
| /* |
| * If the GPU is idle, use the shadow/saved freq to avoid |
| * confusing devfreq (which is unaware that we are switching |
| * to lowest freq until the device is active again) |
| */ |
| if (df->idle_freq) |
| return df->idle_freq; |
| |
| if (gpu->funcs->gpu_get_freq) |
| return gpu->funcs->gpu_get_freq(gpu); |
| |
| return clk_get_rate(gpu->core_clk); |
| } |
| |
| static int msm_devfreq_get_dev_status(struct device *dev, |
| struct devfreq_dev_status *status) |
| { |
| struct msm_gpu *gpu = dev_to_gpu(dev); |
| struct msm_gpu_devfreq *df = &gpu->devfreq; |
| u64 busy_cycles, busy_time; |
| unsigned long sample_rate; |
| ktime_t time; |
| |
| mutex_lock(&df->lock); |
| |
| status->current_frequency = get_freq(gpu); |
| time = ktime_get(); |
| status->total_time = ktime_us_delta(time, df->time); |
| df->time = time; |
| |
| if (df->suspended) { |
| mutex_unlock(&df->lock); |
| status->busy_time = 0; |
| return 0; |
| } |
| |
| busy_cycles = gpu->funcs->gpu_busy(gpu, &sample_rate); |
| busy_time = busy_cycles - df->busy_cycles; |
| df->busy_cycles = busy_cycles; |
| |
| mutex_unlock(&df->lock); |
| |
| busy_time *= USEC_PER_SEC; |
| busy_time = div64_ul(busy_time, sample_rate); |
| if (WARN_ON(busy_time > ~0LU)) |
| busy_time = ~0LU; |
| |
| status->busy_time = busy_time; |
| |
| return 0; |
| } |
| |
| static int msm_devfreq_get_cur_freq(struct device *dev, unsigned long *freq) |
| { |
| *freq = get_freq(dev_to_gpu(dev)); |
| |
| return 0; |
| } |
| |
| static struct devfreq_dev_profile msm_devfreq_profile = { |
| .timer = DEVFREQ_TIMER_DELAYED, |
| .polling_ms = 50, |
| .target = msm_devfreq_target, |
| .get_dev_status = msm_devfreq_get_dev_status, |
| .get_cur_freq = msm_devfreq_get_cur_freq, |
| }; |
| |
| static void msm_devfreq_boost_work(struct kthread_work *work); |
| static void msm_devfreq_idle_work(struct kthread_work *work); |
| |
| static bool has_devfreq(struct msm_gpu *gpu) |
| { |
| struct msm_gpu_devfreq *df = &gpu->devfreq; |
| return !!df->devfreq; |
| } |
| |
| void msm_devfreq_init(struct msm_gpu *gpu) |
| { |
| struct msm_gpu_devfreq *df = &gpu->devfreq; |
| struct msm_drm_private *priv = gpu->dev->dev_private; |
| |
| /* We need target support to do devfreq */ |
| if (!gpu->funcs->gpu_busy) |
| return; |
| |
| /* |
| * Setup default values for simple_ondemand governor tuning. We |
| * want to throttle up at 50% load for the double-buffer case, |
| * where due to stalling waiting for vblank we could get stuck |
| * at (for ex) 30fps at 50% utilization. |
| */ |
| priv->gpu_devfreq_config.upthreshold = 50; |
| priv->gpu_devfreq_config.downdifferential = 10; |
| |
| mutex_init(&df->lock); |
| |
| dev_pm_qos_add_request(&gpu->pdev->dev, &df->boost_freq, |
| DEV_PM_QOS_MIN_FREQUENCY, 0); |
| |
| msm_devfreq_profile.initial_freq = gpu->fast_rate; |
| |
| /* |
| * Don't set the freq_table or max_state and let devfreq build the table |
| * from OPP |
| * After a deferred probe, these may have be left to non-zero values, |
| * so set them back to zero before creating the devfreq device |
| */ |
| msm_devfreq_profile.freq_table = NULL; |
| msm_devfreq_profile.max_state = 0; |
| |
| df->devfreq = devm_devfreq_add_device(&gpu->pdev->dev, |
| &msm_devfreq_profile, DEVFREQ_GOV_SIMPLE_ONDEMAND, |
| &priv->gpu_devfreq_config); |
| |
| if (IS_ERR(df->devfreq)) { |
| DRM_DEV_ERROR(&gpu->pdev->dev, "Couldn't initialize GPU devfreq\n"); |
| dev_pm_qos_remove_request(&df->boost_freq); |
| df->devfreq = NULL; |
| return; |
| } |
| |
| devfreq_suspend_device(df->devfreq); |
| |
| gpu->cooling = of_devfreq_cooling_register(gpu->pdev->dev.of_node, df->devfreq); |
| if (IS_ERR(gpu->cooling)) { |
| DRM_DEV_ERROR(&gpu->pdev->dev, |
| "Couldn't register GPU cooling device\n"); |
| gpu->cooling = NULL; |
| } |
| |
| msm_hrtimer_work_init(&df->boost_work, gpu->worker, msm_devfreq_boost_work, |
| CLOCK_MONOTONIC, HRTIMER_MODE_REL); |
| msm_hrtimer_work_init(&df->idle_work, gpu->worker, msm_devfreq_idle_work, |
| CLOCK_MONOTONIC, HRTIMER_MODE_REL); |
| } |
| |
| static void cancel_idle_work(struct msm_gpu_devfreq *df) |
| { |
| hrtimer_cancel(&df->idle_work.timer); |
| kthread_cancel_work_sync(&df->idle_work.work); |
| } |
| |
| static void cancel_boost_work(struct msm_gpu_devfreq *df) |
| { |
| hrtimer_cancel(&df->boost_work.timer); |
| kthread_cancel_work_sync(&df->boost_work.work); |
| } |
| |
| void msm_devfreq_cleanup(struct msm_gpu *gpu) |
| { |
| struct msm_gpu_devfreq *df = &gpu->devfreq; |
| |
| if (!has_devfreq(gpu)) |
| return; |
| |
| devfreq_cooling_unregister(gpu->cooling); |
| dev_pm_qos_remove_request(&df->boost_freq); |
| } |
| |
| void msm_devfreq_resume(struct msm_gpu *gpu) |
| { |
| struct msm_gpu_devfreq *df = &gpu->devfreq; |
| unsigned long sample_rate; |
| |
| if (!has_devfreq(gpu)) |
| return; |
| |
| mutex_lock(&df->lock); |
| df->busy_cycles = gpu->funcs->gpu_busy(gpu, &sample_rate); |
| df->time = ktime_get(); |
| df->suspended = false; |
| mutex_unlock(&df->lock); |
| |
| devfreq_resume_device(df->devfreq); |
| } |
| |
| void msm_devfreq_suspend(struct msm_gpu *gpu) |
| { |
| struct msm_gpu_devfreq *df = &gpu->devfreq; |
| |
| if (!has_devfreq(gpu)) |
| return; |
| |
| mutex_lock(&df->lock); |
| df->suspended = true; |
| mutex_unlock(&df->lock); |
| |
| devfreq_suspend_device(df->devfreq); |
| |
| cancel_idle_work(df); |
| cancel_boost_work(df); |
| } |
| |
| static void msm_devfreq_boost_work(struct kthread_work *work) |
| { |
| struct msm_gpu_devfreq *df = container_of(work, |
| struct msm_gpu_devfreq, boost_work.work); |
| |
| dev_pm_qos_update_request(&df->boost_freq, 0); |
| } |
| |
| void msm_devfreq_boost(struct msm_gpu *gpu, unsigned factor) |
| { |
| struct msm_gpu_devfreq *df = &gpu->devfreq; |
| uint64_t freq; |
| |
| if (!has_devfreq(gpu)) |
| return; |
| |
| freq = get_freq(gpu); |
| freq *= factor; |
| |
| /* |
| * A nice little trap is that PM QoS operates in terms of KHz, |
| * while devfreq operates in terms of Hz: |
| */ |
| do_div(freq, HZ_PER_KHZ); |
| |
| dev_pm_qos_update_request(&df->boost_freq, freq); |
| |
| msm_hrtimer_queue_work(&df->boost_work, |
| ms_to_ktime(msm_devfreq_profile.polling_ms), |
| HRTIMER_MODE_REL); |
| } |
| |
| void msm_devfreq_active(struct msm_gpu *gpu) |
| { |
| struct msm_gpu_devfreq *df = &gpu->devfreq; |
| unsigned int idle_time; |
| unsigned long target_freq; |
| |
| if (!has_devfreq(gpu)) |
| return; |
| |
| /* |
| * Cancel any pending transition to idle frequency: |
| */ |
| cancel_idle_work(df); |
| |
| /* |
| * Hold devfreq lock to synchronize with get_dev_status()/ |
| * target() callbacks |
| */ |
| mutex_lock(&df->devfreq->lock); |
| |
| target_freq = df->idle_freq; |
| |
| idle_time = ktime_to_ms(ktime_sub(ktime_get(), df->idle_time)); |
| |
| df->idle_freq = 0; |
| |
| /* |
| * We could have become active again before the idle work had a |
| * chance to run, in which case the df->idle_freq would have |
| * still been zero. In this case, no need to change freq. |
| */ |
| if (target_freq) |
| msm_devfreq_target(&gpu->pdev->dev, &target_freq, 0); |
| |
| mutex_unlock(&df->devfreq->lock); |
| |
| /* |
| * If we've been idle for a significant fraction of a polling |
| * interval, then we won't meet the threshold of busyness for |
| * the governor to ramp up the freq.. so give some boost |
| */ |
| if (idle_time > msm_devfreq_profile.polling_ms) { |
| msm_devfreq_boost(gpu, 2); |
| } |
| } |
| |
| |
| static void msm_devfreq_idle_work(struct kthread_work *work) |
| { |
| struct msm_gpu_devfreq *df = container_of(work, |
| struct msm_gpu_devfreq, idle_work.work); |
| struct msm_gpu *gpu = container_of(df, struct msm_gpu, devfreq); |
| struct msm_drm_private *priv = gpu->dev->dev_private; |
| unsigned long idle_freq, target_freq = 0; |
| |
| /* |
| * Hold devfreq lock to synchronize with get_dev_status()/ |
| * target() callbacks |
| */ |
| mutex_lock(&df->devfreq->lock); |
| |
| idle_freq = get_freq(gpu); |
| |
| if (priv->gpu_clamp_to_idle) |
| msm_devfreq_target(&gpu->pdev->dev, &target_freq, 0); |
| |
| df->idle_time = ktime_get(); |
| df->idle_freq = idle_freq; |
| |
| mutex_unlock(&df->devfreq->lock); |
| } |
| |
| void msm_devfreq_idle(struct msm_gpu *gpu) |
| { |
| struct msm_gpu_devfreq *df = &gpu->devfreq; |
| |
| if (!has_devfreq(gpu)) |
| return; |
| |
| msm_hrtimer_queue_work(&df->idle_work, ms_to_ktime(1), |
| HRTIMER_MODE_REL); |
| } |