| // SPDX-License-Identifier: MIT |
| /* |
| * Copyright © 2022 Intel Corporation |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/firmware.h> |
| |
| #include <drm/drm_managed.h> |
| |
| #include "regs/xe_guc_regs.h" |
| #include "xe_bo.h" |
| #include "xe_device_types.h" |
| #include "xe_force_wake.h" |
| #include "xe_gsc.h" |
| #include "xe_gt.h" |
| #include "xe_map.h" |
| #include "xe_mmio.h" |
| #include "xe_module.h" |
| #include "xe_uc_fw.h" |
| |
| /* |
| * List of required GuC and HuC binaries per-platform. They must be ordered |
| * based on platform, from newer to older. |
| * |
| * Versioning follows the guidelines from |
| * Documentation/driver-api/firmware/firmware-usage-guidelines.rst. There is a |
| * distinction for platforms being officially supported by the driver or not. |
| * Platforms not available publicly or not yet officially supported by the |
| * driver (under force-probe), use the mmp_ver(): the firmware autoselect logic |
| * will select the firmware from disk with filename that matches the full |
| * "mpp version", i.e. major.minor.patch. mmp_ver() should only be used for |
| * this case. |
| * |
| * For platforms officially supported by the driver, the filename always only |
| * ever contains the major version (GuC) or no version at all (HuC). |
| * |
| * After loading the file, the driver parses the versions embedded in the blob. |
| * The major version needs to match a major version supported by the driver (if |
| * any). The minor version is also checked and a notice emitted to the log if |
| * the version found is smaller than the version wanted. This is done only for |
| * informational purposes so users may have a chance to upgrade, but the driver |
| * still loads and use the older firmware. |
| * |
| * Examples: |
| * |
| * 1) Platform officially supported by i915 - using Tigerlake as example. |
| * Driver loads the following firmware blobs from disk: |
| * |
| * - i915/tgl_guc_<major>.bin |
| * - i915/tgl_huc.bin |
| * |
| * <major> number for GuC is checked that it matches the version inside |
| * the blob. <minor> version is checked and if smaller than the expected |
| * an info message is emitted about that. |
| * |
| * 1) XE_<FUTUREINTELPLATFORM>, still under require_force_probe. Using |
| * "wipplat" as a short-name. Driver loads the following firmware blobs |
| * from disk: |
| * |
| * - xe/wipplat_guc_<major>.<minor>.<patch>.bin |
| * - xe/wipplat_huc_<major>.<minor>.<patch>.bin |
| * |
| * <major> and <minor> are checked that they match the version inside |
| * the blob. Both of them need to match exactly what the driver is |
| * expecting, otherwise it fails. |
| * |
| * 3) Platform officially supported by xe and out of force-probe. Using |
| * "plat" as a short-name. Except for the different directory, the |
| * behavior is the same as (1). Driver loads the following firmware |
| * blobs from disk: |
| * |
| * - xe/plat_guc_<major>.bin |
| * - xe/plat_huc.bin |
| * |
| * <major> number for GuC is checked that it matches the version inside |
| * the blob. <minor> version is checked and if smaller than the expected |
| * an info message is emitted about that. |
| * |
| * For the platforms already released with a major version, they should never be |
| * removed from the table. Instead new entries with newer versions may be added |
| * before them, so they take precedence. |
| * |
| * TODO: Currently there's no fallback on major version. That's because xe |
| * driver only supports the one major version of each firmware in the table. |
| * This needs to be fixed when the major version of GuC is updated. |
| */ |
| |
| struct uc_fw_entry { |
| enum xe_platform platform; |
| struct { |
| const char *path; |
| u16 major; |
| u16 minor; |
| u16 patch; |
| bool full_ver_required; |
| }; |
| }; |
| |
| struct fw_blobs_by_type { |
| const struct uc_fw_entry *entries; |
| u32 count; |
| }; |
| |
| #define XE_GUC_FIRMWARE_DEFS(fw_def, mmp_ver, major_ver) \ |
| fw_def(LUNARLAKE, major_ver(xe, guc, lnl, 70, 19, 2)) \ |
| fw_def(METEORLAKE, major_ver(i915, guc, mtl, 70, 19, 2)) \ |
| fw_def(DG2, major_ver(i915, guc, dg2, 70, 19, 2)) \ |
| fw_def(DG1, major_ver(i915, guc, dg1, 70, 19, 2)) \ |
| fw_def(ALDERLAKE_N, major_ver(i915, guc, tgl, 70, 19, 2)) \ |
| fw_def(ALDERLAKE_P, major_ver(i915, guc, adlp, 70, 19, 2)) \ |
| fw_def(ALDERLAKE_S, major_ver(i915, guc, tgl, 70, 19, 2)) \ |
| fw_def(ROCKETLAKE, major_ver(i915, guc, tgl, 70, 19, 2)) \ |
| fw_def(TIGERLAKE, major_ver(i915, guc, tgl, 70, 19, 2)) |
| |
| #define XE_HUC_FIRMWARE_DEFS(fw_def, mmp_ver, no_ver) \ |
| fw_def(METEORLAKE, no_ver(i915, huc_gsc, mtl)) \ |
| fw_def(DG1, no_ver(i915, huc, dg1)) \ |
| fw_def(ALDERLAKE_P, no_ver(i915, huc, tgl)) \ |
| fw_def(ALDERLAKE_S, no_ver(i915, huc, tgl)) \ |
| fw_def(ROCKETLAKE, no_ver(i915, huc, tgl)) \ |
| fw_def(TIGERLAKE, no_ver(i915, huc, tgl)) |
| |
| /* for the GSC FW we match the compatibility version and not the release one */ |
| #define XE_GSC_FIRMWARE_DEFS(fw_def, major_ver) \ |
| fw_def(METEORLAKE, major_ver(i915, gsc, mtl, 1, 0, 0)) |
| |
| #define MAKE_FW_PATH(dir__, uc__, shortname__, version__) \ |
| __stringify(dir__) "/" __stringify(shortname__) "_" __stringify(uc__) version__ ".bin" |
| |
| #define fw_filename_mmp_ver(dir_, uc_, shortname_, a, b, c) \ |
| MAKE_FW_PATH(dir_, uc_, shortname_, "_" __stringify(a ## . ## b ## . ## c)) |
| #define fw_filename_major_ver(dir_, uc_, shortname_, a, b, c) \ |
| MAKE_FW_PATH(dir_, uc_, shortname_, "_" __stringify(a)) |
| #define fw_filename_no_ver(dir_, uc_, shortname_) \ |
| MAKE_FW_PATH(dir_, uc_, shortname_, "") |
| |
| #define uc_fw_entry_mmp_ver(dir_, uc_, shortname_, a, b, c) \ |
| { fw_filename_mmp_ver(dir_, uc_, shortname_, a, b, c), \ |
| a, b, c, true } |
| #define uc_fw_entry_major_ver(dir_, uc_, shortname_, a, b, c) \ |
| { fw_filename_major_ver(dir_, uc_, shortname_, a, b, c), \ |
| a, b, c } |
| #define uc_fw_entry_no_ver(dir_, uc_, shortname_) \ |
| { fw_filename_no_ver(dir_, uc_, shortname_), \ |
| 0, 0 } |
| |
| /* All blobs need to be declared via MODULE_FIRMWARE() */ |
| #define XE_UC_MODULE_FIRMWARE(platform__, fw_filename) \ |
| MODULE_FIRMWARE(fw_filename); |
| |
| #define XE_UC_FW_ENTRY(platform__, entry__) \ |
| { \ |
| .platform = XE_ ## platform__, \ |
| entry__, \ |
| }, |
| |
| XE_GUC_FIRMWARE_DEFS(XE_UC_MODULE_FIRMWARE, |
| fw_filename_mmp_ver, fw_filename_major_ver) |
| XE_HUC_FIRMWARE_DEFS(XE_UC_MODULE_FIRMWARE, |
| fw_filename_mmp_ver, fw_filename_no_ver) |
| XE_GSC_FIRMWARE_DEFS(XE_UC_MODULE_FIRMWARE, fw_filename_major_ver) |
| |
| static struct xe_gt * |
| __uc_fw_to_gt(struct xe_uc_fw *uc_fw, enum xe_uc_fw_type type) |
| { |
| XE_WARN_ON(type >= XE_UC_FW_NUM_TYPES); |
| |
| switch (type) { |
| case XE_UC_FW_TYPE_GUC: |
| return container_of(uc_fw, struct xe_gt, uc.guc.fw); |
| case XE_UC_FW_TYPE_HUC: |
| return container_of(uc_fw, struct xe_gt, uc.huc.fw); |
| case XE_UC_FW_TYPE_GSC: |
| return container_of(uc_fw, struct xe_gt, uc.gsc.fw); |
| default: |
| return NULL; |
| } |
| } |
| |
| static struct xe_gt *uc_fw_to_gt(struct xe_uc_fw *uc_fw) |
| { |
| return __uc_fw_to_gt(uc_fw, uc_fw->type); |
| } |
| |
| static struct xe_device *uc_fw_to_xe(struct xe_uc_fw *uc_fw) |
| { |
| return gt_to_xe(uc_fw_to_gt(uc_fw)); |
| } |
| |
| static void |
| uc_fw_auto_select(struct xe_device *xe, struct xe_uc_fw *uc_fw) |
| { |
| static const struct uc_fw_entry entries_guc[] = { |
| XE_GUC_FIRMWARE_DEFS(XE_UC_FW_ENTRY, |
| uc_fw_entry_mmp_ver, |
| uc_fw_entry_major_ver) |
| }; |
| static const struct uc_fw_entry entries_huc[] = { |
| XE_HUC_FIRMWARE_DEFS(XE_UC_FW_ENTRY, |
| uc_fw_entry_mmp_ver, |
| uc_fw_entry_no_ver) |
| }; |
| static const struct uc_fw_entry entries_gsc[] = { |
| XE_GSC_FIRMWARE_DEFS(XE_UC_FW_ENTRY, uc_fw_entry_major_ver) |
| }; |
| static const struct fw_blobs_by_type blobs_all[XE_UC_FW_NUM_TYPES] = { |
| [XE_UC_FW_TYPE_GUC] = { entries_guc, ARRAY_SIZE(entries_guc) }, |
| [XE_UC_FW_TYPE_HUC] = { entries_huc, ARRAY_SIZE(entries_huc) }, |
| [XE_UC_FW_TYPE_GSC] = { entries_gsc, ARRAY_SIZE(entries_gsc) }, |
| }; |
| static const struct uc_fw_entry *entries; |
| enum xe_platform p = xe->info.platform; |
| u32 count; |
| int i; |
| |
| xe_assert(xe, uc_fw->type < ARRAY_SIZE(blobs_all)); |
| entries = blobs_all[uc_fw->type].entries; |
| count = blobs_all[uc_fw->type].count; |
| |
| for (i = 0; i < count && p <= entries[i].platform; i++) { |
| if (p == entries[i].platform) { |
| uc_fw->path = entries[i].path; |
| uc_fw->versions.wanted.major = entries[i].major; |
| uc_fw->versions.wanted.minor = entries[i].minor; |
| uc_fw->versions.wanted.patch = entries[i].patch; |
| uc_fw->full_ver_required = entries[i].full_ver_required; |
| |
| if (uc_fw->type == XE_UC_FW_TYPE_GSC) |
| uc_fw->versions.wanted_type = XE_UC_FW_VER_COMPATIBILITY; |
| else |
| uc_fw->versions.wanted_type = XE_UC_FW_VER_RELEASE; |
| |
| break; |
| } |
| } |
| } |
| |
| static void |
| uc_fw_override(struct xe_uc_fw *uc_fw) |
| { |
| char *path_override = NULL; |
| |
| /* empty string disables, but it's not allowed for GuC */ |
| switch (uc_fw->type) { |
| case XE_UC_FW_TYPE_GUC: |
| if (xe_modparam.guc_firmware_path && *xe_modparam.guc_firmware_path) |
| path_override = xe_modparam.guc_firmware_path; |
| break; |
| case XE_UC_FW_TYPE_HUC: |
| path_override = xe_modparam.huc_firmware_path; |
| break; |
| case XE_UC_FW_TYPE_GSC: |
| path_override = xe_modparam.gsc_firmware_path; |
| break; |
| default: |
| break; |
| } |
| |
| if (path_override) { |
| uc_fw->path = path_override; |
| uc_fw->user_overridden = true; |
| } |
| } |
| |
| /** |
| * xe_uc_fw_copy_rsa - copy fw RSA to buffer |
| * |
| * @uc_fw: uC firmware |
| * @dst: dst buffer |
| * @max_len: max number of bytes to copy |
| * |
| * Return: number of copied bytes. |
| */ |
| size_t xe_uc_fw_copy_rsa(struct xe_uc_fw *uc_fw, void *dst, u32 max_len) |
| { |
| struct xe_device *xe = uc_fw_to_xe(uc_fw); |
| u32 size = min_t(u32, uc_fw->rsa_size, max_len); |
| |
| xe_assert(xe, !(size % 4)); |
| xe_assert(xe, xe_uc_fw_is_available(uc_fw)); |
| |
| xe_map_memcpy_from(xe, dst, &uc_fw->bo->vmap, |
| xe_uc_fw_rsa_offset(uc_fw), size); |
| |
| return size; |
| } |
| |
| static void uc_fw_fini(struct drm_device *drm, void *arg) |
| { |
| struct xe_uc_fw *uc_fw = arg; |
| |
| if (!xe_uc_fw_is_available(uc_fw)) |
| return; |
| |
| xe_uc_fw_change_status(uc_fw, XE_UC_FIRMWARE_SELECTED); |
| } |
| |
| static void guc_read_css_info(struct xe_uc_fw *uc_fw, struct uc_css_header *css) |
| { |
| struct xe_gt *gt = uc_fw_to_gt(uc_fw); |
| struct xe_uc_fw_version *release = &uc_fw->versions.found[XE_UC_FW_VER_RELEASE]; |
| struct xe_uc_fw_version *compatibility = &uc_fw->versions.found[XE_UC_FW_VER_COMPATIBILITY]; |
| |
| xe_gt_assert(gt, uc_fw->type == XE_UC_FW_TYPE_GUC); |
| xe_gt_assert(gt, release->major >= 70); |
| |
| if (release->major > 70 || release->minor >= 6) { |
| /* v70.6.0 adds CSS header support */ |
| compatibility->major = FIELD_GET(CSS_SW_VERSION_UC_MAJOR, |
| css->submission_version); |
| compatibility->minor = FIELD_GET(CSS_SW_VERSION_UC_MINOR, |
| css->submission_version); |
| compatibility->patch = FIELD_GET(CSS_SW_VERSION_UC_PATCH, |
| css->submission_version); |
| } else if (release->minor >= 3) { |
| /* v70.3.0 introduced v1.1.0 */ |
| compatibility->major = 1; |
| compatibility->minor = 1; |
| compatibility->patch = 0; |
| } else { |
| /* v70.0.0 introduced v1.0.0 */ |
| compatibility->major = 1; |
| compatibility->minor = 0; |
| compatibility->patch = 0; |
| } |
| |
| uc_fw->private_data_size = css->private_data_size; |
| } |
| |
| int xe_uc_fw_check_version_requirements(struct xe_uc_fw *uc_fw) |
| { |
| struct xe_device *xe = uc_fw_to_xe(uc_fw); |
| struct xe_uc_fw_version *wanted = &uc_fw->versions.wanted; |
| struct xe_uc_fw_version *found = &uc_fw->versions.found[uc_fw->versions.wanted_type]; |
| |
| /* Driver has no requirement on any version, any is good. */ |
| if (!wanted->major) |
| return 0; |
| |
| /* |
| * If full version is required, both major and minor should match. |
| * Otherwise, at least the major version. |
| */ |
| if (wanted->major != found->major || |
| (uc_fw->full_ver_required && |
| ((wanted->minor != found->minor) || |
| (wanted->patch != found->patch)))) { |
| drm_notice(&xe->drm, "%s firmware %s: unexpected version: %u.%u.%u != %u.%u.%u\n", |
| xe_uc_fw_type_repr(uc_fw->type), uc_fw->path, |
| found->major, found->minor, found->patch, |
| wanted->major, wanted->minor, wanted->patch); |
| goto fail; |
| } |
| |
| if (wanted->minor > found->minor || |
| (wanted->minor == found->minor && wanted->patch > found->patch)) { |
| drm_notice(&xe->drm, "%s firmware (%u.%u.%u) is recommended, but only (%u.%u.%u) was found in %s\n", |
| xe_uc_fw_type_repr(uc_fw->type), |
| wanted->major, wanted->minor, wanted->patch, |
| found->major, found->minor, found->patch, |
| uc_fw->path); |
| drm_info(&xe->drm, "Consider updating your linux-firmware pkg or downloading from %s\n", |
| XE_UC_FIRMWARE_URL); |
| } |
| |
| return 0; |
| |
| fail: |
| if (xe_uc_fw_is_overridden(uc_fw)) |
| return 0; |
| |
| return -ENOEXEC; |
| } |
| |
| /* Refer to the "CSS-based Firmware Layout" documentation entry for details */ |
| static int parse_css_header(struct xe_uc_fw *uc_fw, const void *fw_data, size_t fw_size) |
| { |
| struct xe_device *xe = uc_fw_to_xe(uc_fw); |
| struct xe_uc_fw_version *release = &uc_fw->versions.found[XE_UC_FW_VER_RELEASE]; |
| struct uc_css_header *css; |
| size_t size; |
| |
| /* Check the size of the blob before examining buffer contents */ |
| if (unlikely(fw_size < sizeof(struct uc_css_header))) { |
| drm_warn(&xe->drm, "%s firmware %s: invalid size: %zu < %zu\n", |
| xe_uc_fw_type_repr(uc_fw->type), uc_fw->path, |
| fw_size, sizeof(struct uc_css_header)); |
| return -ENODATA; |
| } |
| |
| css = (struct uc_css_header *)fw_data; |
| |
| /* Check integrity of size values inside CSS header */ |
| size = (css->header_size_dw - css->key_size_dw - css->modulus_size_dw - |
| css->exponent_size_dw) * sizeof(u32); |
| if (unlikely(size != sizeof(struct uc_css_header))) { |
| drm_warn(&xe->drm, |
| "%s firmware %s: unexpected header size: %zu != %zu\n", |
| xe_uc_fw_type_repr(uc_fw->type), uc_fw->path, |
| fw_size, sizeof(struct uc_css_header)); |
| return -EPROTO; |
| } |
| |
| /* uCode size must calculated from other sizes */ |
| uc_fw->ucode_size = (css->size_dw - css->header_size_dw) * sizeof(u32); |
| |
| /* now RSA */ |
| uc_fw->rsa_size = css->key_size_dw * sizeof(u32); |
| |
| /* At least, it should have header, uCode and RSA. Size of all three. */ |
| size = sizeof(struct uc_css_header) + uc_fw->ucode_size + |
| uc_fw->rsa_size; |
| if (unlikely(fw_size < size)) { |
| drm_warn(&xe->drm, "%s firmware %s: invalid size: %zu < %zu\n", |
| xe_uc_fw_type_repr(uc_fw->type), uc_fw->path, |
| fw_size, size); |
| return -ENOEXEC; |
| } |
| |
| /* Get version numbers from the CSS header */ |
| release->major = FIELD_GET(CSS_SW_VERSION_UC_MAJOR, css->sw_version); |
| release->minor = FIELD_GET(CSS_SW_VERSION_UC_MINOR, css->sw_version); |
| release->patch = FIELD_GET(CSS_SW_VERSION_UC_PATCH, css->sw_version); |
| |
| if (uc_fw->type == XE_UC_FW_TYPE_GUC) |
| guc_read_css_info(uc_fw, css); |
| |
| return 0; |
| } |
| |
| static bool is_cpd_header(const void *data) |
| { |
| const u32 *marker = data; |
| |
| return *marker == GSC_CPD_HEADER_MARKER; |
| } |
| |
| static u32 entry_offset(const struct gsc_cpd_header_v2 *header, const char *name) |
| { |
| const struct gsc_cpd_entry *entry; |
| int i; |
| |
| entry = (void *)header + header->header_length; |
| |
| for (i = 0; i < header->num_of_entries; i++, entry++) |
| if (strcmp(entry->name, name) == 0) |
| return entry->offset & GSC_CPD_ENTRY_OFFSET_MASK; |
| |
| return 0; |
| } |
| |
| /* Refer to the "GSC-based Firmware Layout" documentation entry for details */ |
| static int parse_cpd_header(struct xe_uc_fw *uc_fw, const void *data, size_t size, |
| const char *manifest_entry, const char *css_entry) |
| { |
| struct xe_gt *gt = uc_fw_to_gt(uc_fw); |
| struct xe_device *xe = gt_to_xe(gt); |
| const struct gsc_cpd_header_v2 *header = data; |
| struct xe_uc_fw_version *release = &uc_fw->versions.found[XE_UC_FW_VER_RELEASE]; |
| const struct gsc_manifest_header *manifest; |
| size_t min_size = sizeof(*header); |
| u32 offset; |
| |
| /* manifest_entry is mandatory, css_entry is optional */ |
| xe_assert(xe, manifest_entry); |
| |
| if (size < min_size || !is_cpd_header(header)) |
| return -ENOENT; |
| |
| if (header->header_length < sizeof(struct gsc_cpd_header_v2)) { |
| xe_gt_err(gt, "invalid CPD header length %u!\n", header->header_length); |
| return -EINVAL; |
| } |
| |
| min_size = header->header_length + sizeof(struct gsc_cpd_entry) * header->num_of_entries; |
| if (size < min_size) { |
| xe_gt_err(gt, "FW too small! %zu < %zu\n", size, min_size); |
| return -ENODATA; |
| } |
| |
| /* Look for the manifest first */ |
| offset = entry_offset(header, manifest_entry); |
| if (!offset) { |
| xe_gt_err(gt, "Failed to find %s manifest!\n", |
| xe_uc_fw_type_repr(uc_fw->type)); |
| return -ENODATA; |
| } |
| |
| min_size = offset + sizeof(struct gsc_manifest_header); |
| if (size < min_size) { |
| xe_gt_err(gt, "FW too small! %zu < %zu\n", size, min_size); |
| return -ENODATA; |
| } |
| |
| manifest = data + offset; |
| |
| release->major = manifest->fw_version.major; |
| release->minor = manifest->fw_version.minor; |
| release->patch = manifest->fw_version.hotfix; |
| |
| if (uc_fw->type == XE_UC_FW_TYPE_GSC) { |
| struct xe_gsc *gsc = container_of(uc_fw, struct xe_gsc, fw); |
| |
| release->build = manifest->fw_version.build; |
| gsc->security_version = manifest->security_version; |
| } |
| |
| /* then optionally look for the css header */ |
| if (css_entry) { |
| int ret; |
| |
| /* |
| * This section does not contain a CSS entry on DG2. We |
| * don't support DG2 HuC right now, so no need to handle |
| * it, just add a reminder in case that changes. |
| */ |
| xe_assert(xe, xe->info.platform != XE_DG2); |
| |
| offset = entry_offset(header, css_entry); |
| |
| /* the CSS header parser will check that the CSS header fits */ |
| if (offset > size) { |
| xe_gt_err(gt, "FW too small! %zu < %u\n", size, offset); |
| return -ENODATA; |
| } |
| |
| ret = parse_css_header(uc_fw, data + offset, size - offset); |
| if (ret) |
| return ret; |
| |
| uc_fw->css_offset = offset; |
| } |
| |
| uc_fw->has_gsc_headers = true; |
| |
| return 0; |
| } |
| |
| static int parse_gsc_layout(struct xe_uc_fw *uc_fw, const void *data, size_t size) |
| { |
| struct xe_gt *gt = uc_fw_to_gt(uc_fw); |
| const struct gsc_layout_pointers *layout = data; |
| const struct gsc_bpdt_header *bpdt_header = NULL; |
| const struct gsc_bpdt_entry *bpdt_entry = NULL; |
| size_t min_size = sizeof(*layout); |
| int i; |
| |
| if (size < min_size) { |
| xe_gt_err(gt, "GSC FW too small! %zu < %zu\n", size, min_size); |
| return -ENODATA; |
| } |
| |
| min_size = layout->boot1.offset + layout->boot1.size; |
| if (size < min_size) { |
| xe_gt_err(gt, "GSC FW too small for boot section! %zu < %zu\n", |
| size, min_size); |
| return -ENODATA; |
| } |
| |
| min_size = sizeof(*bpdt_header); |
| if (layout->boot1.size < min_size) { |
| xe_gt_err(gt, "GSC FW boot section too small for BPDT header: %u < %zu\n", |
| layout->boot1.size, min_size); |
| return -ENODATA; |
| } |
| |
| bpdt_header = data + layout->boot1.offset; |
| if (bpdt_header->signature != GSC_BPDT_HEADER_SIGNATURE) { |
| xe_gt_err(gt, "invalid signature for BPDT header: 0x%08x!\n", |
| bpdt_header->signature); |
| return -EINVAL; |
| } |
| |
| min_size += sizeof(*bpdt_entry) * bpdt_header->descriptor_count; |
| if (layout->boot1.size < min_size) { |
| xe_gt_err(gt, "GSC FW boot section too small for BPDT entries: %u < %zu\n", |
| layout->boot1.size, min_size); |
| return -ENODATA; |
| } |
| |
| bpdt_entry = (void *)bpdt_header + sizeof(*bpdt_header); |
| for (i = 0; i < bpdt_header->descriptor_count; i++, bpdt_entry++) { |
| if ((bpdt_entry->type & GSC_BPDT_ENTRY_TYPE_MASK) != |
| GSC_BPDT_ENTRY_TYPE_GSC_RBE) |
| continue; |
| |
| min_size = bpdt_entry->sub_partition_offset; |
| |
| /* the CPD header parser will check that the CPD header fits */ |
| if (layout->boot1.size < min_size) { |
| xe_gt_err(gt, "GSC FW boot section too small for CPD offset: %u < %zu\n", |
| layout->boot1.size, min_size); |
| return -ENODATA; |
| } |
| |
| return parse_cpd_header(uc_fw, |
| (void *)bpdt_header + min_size, |
| layout->boot1.size - min_size, |
| "RBEP.man", NULL); |
| } |
| |
| xe_gt_err(gt, "couldn't find CPD header in GSC binary!\n"); |
| return -ENODATA; |
| } |
| |
| static int parse_headers(struct xe_uc_fw *uc_fw, const struct firmware *fw) |
| { |
| int ret; |
| |
| /* |
| * All GuC releases and older HuC ones use CSS headers, while newer HuC |
| * releases use GSC CPD headers. |
| */ |
| switch (uc_fw->type) { |
| case XE_UC_FW_TYPE_GSC: |
| return parse_gsc_layout(uc_fw, fw->data, fw->size); |
| case XE_UC_FW_TYPE_HUC: |
| ret = parse_cpd_header(uc_fw, fw->data, fw->size, "HUCP.man", "huc_fw"); |
| if (!ret || ret != -ENOENT) |
| return ret; |
| fallthrough; |
| case XE_UC_FW_TYPE_GUC: |
| return parse_css_header(uc_fw, fw->data, fw->size); |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| #define print_uc_fw_version(p_, version_, prefix_, ...) \ |
| do { \ |
| struct xe_uc_fw_version *ver_ = (version_); \ |
| if (ver_->build) \ |
| drm_printf(p_, prefix_ " version %u.%u.%u.%u\n", ##__VA_ARGS__, \ |
| ver_->major, ver_->minor, \ |
| ver_->patch, ver_->build); \ |
| else \ |
| drm_printf(p_, prefix_ " version %u.%u.%u\n", ##__VA_ARGS__, \ |
| ver_->major, ver_->minor, ver_->patch); \ |
| } while (0) |
| |
| static int uc_fw_request(struct xe_uc_fw *uc_fw, const struct firmware **firmware_p) |
| { |
| struct xe_device *xe = uc_fw_to_xe(uc_fw); |
| struct device *dev = xe->drm.dev; |
| struct drm_printer p = drm_info_printer(dev); |
| const struct firmware *fw = NULL; |
| int err; |
| |
| /* |
| * we use FIRMWARE_UNINITIALIZED to detect checks against uc_fw->status |
| * before we're looked at the HW caps to see if we have uc support |
| */ |
| BUILD_BUG_ON(XE_UC_FIRMWARE_UNINITIALIZED); |
| xe_assert(xe, !uc_fw->status); |
| xe_assert(xe, !uc_fw->path); |
| |
| uc_fw_auto_select(xe, uc_fw); |
| uc_fw_override(uc_fw); |
| xe_uc_fw_change_status(uc_fw, uc_fw->path ? |
| XE_UC_FIRMWARE_SELECTED : |
| XE_UC_FIRMWARE_NOT_SUPPORTED); |
| |
| if (!xe_uc_fw_is_supported(uc_fw)) { |
| if (uc_fw->type == XE_UC_FW_TYPE_GUC) { |
| drm_err(&xe->drm, "No GuC firmware defined for platform\n"); |
| return -ENOENT; |
| } |
| return 0; |
| } |
| |
| /* an empty path means the firmware is disabled */ |
| if (!xe_device_uc_enabled(xe) || !(*uc_fw->path)) { |
| xe_uc_fw_change_status(uc_fw, XE_UC_FIRMWARE_DISABLED); |
| drm_dbg(&xe->drm, "%s disabled", xe_uc_fw_type_repr(uc_fw->type)); |
| return 0; |
| } |
| |
| err = request_firmware(&fw, uc_fw->path, dev); |
| if (err) |
| goto fail; |
| |
| err = parse_headers(uc_fw, fw); |
| if (err) |
| goto fail; |
| |
| print_uc_fw_version(&p, |
| &uc_fw->versions.found[XE_UC_FW_VER_RELEASE], |
| "Using %s firmware from %s", |
| xe_uc_fw_type_repr(uc_fw->type), uc_fw->path); |
| |
| /* for GSC FW we want the compatibility version, which we query after load */ |
| if (uc_fw->type != XE_UC_FW_TYPE_GSC) { |
| err = xe_uc_fw_check_version_requirements(uc_fw); |
| if (err) |
| goto fail; |
| } |
| |
| *firmware_p = fw; |
| |
| return 0; |
| |
| fail: |
| xe_uc_fw_change_status(uc_fw, err == -ENOENT ? |
| XE_UC_FIRMWARE_MISSING : |
| XE_UC_FIRMWARE_ERROR); |
| |
| drm_notice(&xe->drm, "%s firmware %s: fetch failed with error %d\n", |
| xe_uc_fw_type_repr(uc_fw->type), uc_fw->path, err); |
| drm_info(&xe->drm, "%s firmware(s) can be downloaded from %s\n", |
| xe_uc_fw_type_repr(uc_fw->type), XE_UC_FIRMWARE_URL); |
| |
| release_firmware(fw); /* OK even if fw is NULL */ |
| |
| return err; |
| } |
| |
| static void uc_fw_release(const struct firmware *fw) |
| { |
| release_firmware(fw); |
| } |
| |
| static int uc_fw_copy(struct xe_uc_fw *uc_fw, const void *data, size_t size, u32 flags) |
| { |
| struct xe_device *xe = uc_fw_to_xe(uc_fw); |
| struct xe_gt *gt = uc_fw_to_gt(uc_fw); |
| struct xe_tile *tile = gt_to_tile(gt); |
| struct xe_bo *obj; |
| int err; |
| |
| obj = xe_managed_bo_create_from_data(xe, tile, data, size, flags); |
| if (IS_ERR(obj)) { |
| drm_notice(&xe->drm, "%s firmware %s: failed to create / populate bo", |
| xe_uc_fw_type_repr(uc_fw->type), uc_fw->path); |
| err = PTR_ERR(obj); |
| goto fail; |
| } |
| |
| uc_fw->bo = obj; |
| uc_fw->size = size; |
| |
| xe_uc_fw_change_status(uc_fw, XE_UC_FIRMWARE_AVAILABLE); |
| |
| err = drmm_add_action_or_reset(&xe->drm, uc_fw_fini, uc_fw); |
| if (err) |
| goto fail; |
| |
| return 0; |
| |
| fail: |
| xe_uc_fw_change_status(uc_fw, XE_UC_FIRMWARE_ERROR); |
| drm_notice(&xe->drm, "%s firmware %s: copy failed with error %d\n", |
| xe_uc_fw_type_repr(uc_fw->type), uc_fw->path, err); |
| |
| return err; |
| } |
| |
| int xe_uc_fw_init(struct xe_uc_fw *uc_fw) |
| { |
| const struct firmware *fw = NULL; |
| int err; |
| |
| err = uc_fw_request(uc_fw, &fw); |
| if (err) |
| return err; |
| |
| /* no error and no firmware means nothing to copy */ |
| if (!fw) |
| return 0; |
| |
| err = uc_fw_copy(uc_fw, fw->data, fw->size, |
| XE_BO_CREATE_SYSTEM_BIT | XE_BO_CREATE_GGTT_BIT); |
| |
| uc_fw_release(fw); |
| |
| return err; |
| } |
| |
| static u32 uc_fw_ggtt_offset(struct xe_uc_fw *uc_fw) |
| { |
| return xe_bo_ggtt_addr(uc_fw->bo); |
| } |
| |
| static int uc_fw_xfer(struct xe_uc_fw *uc_fw, u32 offset, u32 dma_flags) |
| { |
| struct xe_device *xe = uc_fw_to_xe(uc_fw); |
| struct xe_gt *gt = uc_fw_to_gt(uc_fw); |
| u32 src_offset, dma_ctrl; |
| int ret; |
| |
| xe_force_wake_assert_held(gt_to_fw(gt), XE_FW_GT); |
| |
| /* Set the source address for the uCode */ |
| src_offset = uc_fw_ggtt_offset(uc_fw) + uc_fw->css_offset; |
| xe_mmio_write32(gt, DMA_ADDR_0_LOW, lower_32_bits(src_offset)); |
| xe_mmio_write32(gt, DMA_ADDR_0_HIGH, |
| upper_32_bits(src_offset) | DMA_ADDRESS_SPACE_GGTT); |
| |
| /* Set the DMA destination */ |
| xe_mmio_write32(gt, DMA_ADDR_1_LOW, offset); |
| xe_mmio_write32(gt, DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM); |
| |
| /* |
| * Set the transfer size. The header plus uCode will be copied to WOPCM |
| * via DMA, excluding any other components |
| */ |
| xe_mmio_write32(gt, DMA_COPY_SIZE, |
| sizeof(struct uc_css_header) + uc_fw->ucode_size); |
| |
| /* Start the DMA */ |
| xe_mmio_write32(gt, DMA_CTRL, |
| _MASKED_BIT_ENABLE(dma_flags | START_DMA)); |
| |
| /* Wait for DMA to finish */ |
| ret = xe_mmio_wait32(gt, DMA_CTRL, START_DMA, 0, 100000, &dma_ctrl, |
| false); |
| if (ret) |
| drm_err(&xe->drm, "DMA for %s fw failed, DMA_CTRL=%u\n", |
| xe_uc_fw_type_repr(uc_fw->type), dma_ctrl); |
| |
| /* Disable the bits once DMA is over */ |
| xe_mmio_write32(gt, DMA_CTRL, _MASKED_BIT_DISABLE(dma_flags)); |
| |
| return ret; |
| } |
| |
| int xe_uc_fw_upload(struct xe_uc_fw *uc_fw, u32 offset, u32 dma_flags) |
| { |
| struct xe_device *xe = uc_fw_to_xe(uc_fw); |
| int err; |
| |
| /* make sure the status was cleared the last time we reset the uc */ |
| xe_assert(xe, !xe_uc_fw_is_loaded(uc_fw)); |
| |
| if (!xe_uc_fw_is_loadable(uc_fw)) |
| return -ENOEXEC; |
| |
| /* Call custom loader */ |
| err = uc_fw_xfer(uc_fw, offset, dma_flags); |
| if (err) |
| goto fail; |
| |
| xe_uc_fw_change_status(uc_fw, XE_UC_FIRMWARE_TRANSFERRED); |
| return 0; |
| |
| fail: |
| drm_err(&xe->drm, "Failed to load %s firmware %s (%d)\n", |
| xe_uc_fw_type_repr(uc_fw->type), uc_fw->path, |
| err); |
| xe_uc_fw_change_status(uc_fw, XE_UC_FIRMWARE_LOAD_FAIL); |
| return err; |
| } |
| |
| static const char *version_type_repr(enum xe_uc_fw_version_types type) |
| { |
| switch (type) { |
| case XE_UC_FW_VER_RELEASE: |
| return "release"; |
| case XE_UC_FW_VER_COMPATIBILITY: |
| return "compatibility"; |
| default: |
| return "Unknown version type"; |
| } |
| } |
| |
| void xe_uc_fw_print(struct xe_uc_fw *uc_fw, struct drm_printer *p) |
| { |
| int i; |
| |
| drm_printf(p, "%s firmware: %s\n", |
| xe_uc_fw_type_repr(uc_fw->type), uc_fw->path); |
| drm_printf(p, "\tstatus: %s\n", |
| xe_uc_fw_status_repr(uc_fw->status)); |
| |
| print_uc_fw_version(p, &uc_fw->versions.wanted, "\twanted %s", |
| version_type_repr(uc_fw->versions.wanted_type)); |
| |
| for (i = 0; i < XE_UC_FW_VER_TYPE_COUNT; i++) { |
| struct xe_uc_fw_version *ver = &uc_fw->versions.found[i]; |
| |
| if (ver->major) |
| print_uc_fw_version(p, ver, "\tfound %s", |
| version_type_repr(i)); |
| } |
| |
| if (uc_fw->ucode_size) |
| drm_printf(p, "\tuCode: %u bytes\n", uc_fw->ucode_size); |
| if (uc_fw->rsa_size) |
| drm_printf(p, "\tRSA: %u bytes\n", uc_fw->rsa_size); |
| } |