| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ZynqMP DisplayPort Subsystem Driver |
| * |
| * Copyright (C) 2017 - 2020 Xilinx, Inc. |
| * |
| * Authors: |
| * - Hyun Woo Kwon <hyun.kwon@xilinx.com> |
| * - Laurent Pinchart <laurent.pinchart@ideasonboard.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/module.h> |
| #include <linux/of_graph.h> |
| #include <linux/of_reserved_mem.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_bridge.h> |
| #include <drm/drm_modeset_helper.h> |
| #include <drm/drm_module.h> |
| |
| #include "zynqmp_disp.h" |
| #include "zynqmp_dp.h" |
| #include "zynqmp_dpsub.h" |
| #include "zynqmp_kms.h" |
| |
| /* ----------------------------------------------------------------------------- |
| * Power Management |
| */ |
| |
| static int __maybe_unused zynqmp_dpsub_suspend(struct device *dev) |
| { |
| struct zynqmp_dpsub *dpsub = dev_get_drvdata(dev); |
| |
| if (!dpsub->drm) |
| return 0; |
| |
| return drm_mode_config_helper_suspend(&dpsub->drm->dev); |
| } |
| |
| static int __maybe_unused zynqmp_dpsub_resume(struct device *dev) |
| { |
| struct zynqmp_dpsub *dpsub = dev_get_drvdata(dev); |
| |
| if (!dpsub->drm) |
| return 0; |
| |
| return drm_mode_config_helper_resume(&dpsub->drm->dev); |
| } |
| |
| static const struct dev_pm_ops zynqmp_dpsub_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(zynqmp_dpsub_suspend, zynqmp_dpsub_resume) |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * DPSUB Configuration |
| */ |
| |
| /** |
| * zynqmp_dpsub_audio_enabled - If the audio is enabled |
| * @dpsub: DisplayPort subsystem |
| * |
| * Return if the audio is enabled depending on the audio clock. |
| * |
| * Return: true if audio is enabled, or false. |
| */ |
| bool zynqmp_dpsub_audio_enabled(struct zynqmp_dpsub *dpsub) |
| { |
| return !!dpsub->aud_clk; |
| } |
| |
| /** |
| * zynqmp_dpsub_get_audio_clk_rate - Get the current audio clock rate |
| * @dpsub: DisplayPort subsystem |
| * |
| * Return: the current audio clock rate. |
| */ |
| unsigned int zynqmp_dpsub_get_audio_clk_rate(struct zynqmp_dpsub *dpsub) |
| { |
| if (zynqmp_dpsub_audio_enabled(dpsub)) |
| return 0; |
| return clk_get_rate(dpsub->aud_clk); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Probe & Remove |
| */ |
| |
| static int zynqmp_dpsub_init_clocks(struct zynqmp_dpsub *dpsub) |
| { |
| int ret; |
| |
| dpsub->apb_clk = devm_clk_get(dpsub->dev, "dp_apb_clk"); |
| if (IS_ERR(dpsub->apb_clk)) |
| return PTR_ERR(dpsub->apb_clk); |
| |
| ret = clk_prepare_enable(dpsub->apb_clk); |
| if (ret) { |
| dev_err(dpsub->dev, "failed to enable the APB clock\n"); |
| return ret; |
| } |
| |
| /* |
| * Try the live PL video clock, and fall back to the PS clock if the |
| * live PL video clock isn't valid. |
| */ |
| dpsub->vid_clk = devm_clk_get(dpsub->dev, "dp_live_video_in_clk"); |
| if (!IS_ERR(dpsub->vid_clk)) |
| dpsub->vid_clk_from_ps = false; |
| else if (PTR_ERR(dpsub->vid_clk) == -EPROBE_DEFER) |
| return PTR_ERR(dpsub->vid_clk); |
| |
| if (IS_ERR_OR_NULL(dpsub->vid_clk)) { |
| dpsub->vid_clk = devm_clk_get(dpsub->dev, "dp_vtc_pixel_clk_in"); |
| if (IS_ERR(dpsub->vid_clk)) { |
| dev_err(dpsub->dev, "failed to init any video clock\n"); |
| return PTR_ERR(dpsub->vid_clk); |
| } |
| dpsub->vid_clk_from_ps = true; |
| } |
| |
| /* |
| * Try the live PL audio clock, and fall back to the PS clock if the |
| * live PL audio clock isn't valid. Missing audio clock disables audio |
| * but isn't an error. |
| */ |
| dpsub->aud_clk = devm_clk_get(dpsub->dev, "dp_live_audio_aclk"); |
| if (!IS_ERR(dpsub->aud_clk)) { |
| dpsub->aud_clk_from_ps = false; |
| return 0; |
| } |
| |
| dpsub->aud_clk = devm_clk_get(dpsub->dev, "dp_aud_clk"); |
| if (!IS_ERR(dpsub->aud_clk)) { |
| dpsub->aud_clk_from_ps = true; |
| return 0; |
| } |
| |
| dev_info(dpsub->dev, "audio disabled due to missing clock\n"); |
| return 0; |
| } |
| |
| static int zynqmp_dpsub_parse_dt(struct zynqmp_dpsub *dpsub) |
| { |
| struct device_node *np; |
| unsigned int i; |
| |
| /* |
| * For backward compatibility with old device trees that don't contain |
| * ports, consider that only the DP output port is connected if no |
| * ports child no exists. |
| */ |
| np = of_get_child_by_name(dpsub->dev->of_node, "ports"); |
| of_node_put(np); |
| if (!np) { |
| dev_warn(dpsub->dev, "missing ports, update DT bindings\n"); |
| dpsub->connected_ports = BIT(ZYNQMP_DPSUB_PORT_OUT_DP); |
| dpsub->dma_enabled = true; |
| return 0; |
| } |
| |
| /* Check which ports are connected. */ |
| for (i = 0; i < ZYNQMP_DPSUB_NUM_PORTS; ++i) { |
| struct device_node *np; |
| |
| np = of_graph_get_remote_node(dpsub->dev->of_node, i, -1); |
| if (np) { |
| dpsub->connected_ports |= BIT(i); |
| of_node_put(np); |
| } |
| } |
| |
| /* Sanity checks. */ |
| if ((dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_LIVE_VIDEO)) && |
| (dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_LIVE_GFX))) { |
| dev_err(dpsub->dev, "only one live video input is supported\n"); |
| return -EINVAL; |
| } |
| |
| if ((dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_LIVE_VIDEO)) || |
| (dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_LIVE_GFX))) { |
| if (dpsub->vid_clk_from_ps) { |
| dev_err(dpsub->dev, |
| "live video input requires PL clock\n"); |
| return -EINVAL; |
| } |
| } else { |
| dpsub->dma_enabled = true; |
| } |
| |
| if (dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_LIVE_AUDIO)) |
| dev_warn(dpsub->dev, "live audio unsupported, ignoring\n"); |
| |
| if ((dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_OUT_VIDEO)) || |
| (dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_OUT_AUDIO))) |
| dev_warn(dpsub->dev, "output to PL unsupported, ignoring\n"); |
| |
| if (!(dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_OUT_DP))) { |
| dev_err(dpsub->dev, "DP output port not connected\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| void zynqmp_dpsub_release(struct zynqmp_dpsub *dpsub) |
| { |
| kfree(dpsub->disp); |
| kfree(dpsub->dp); |
| kfree(dpsub); |
| } |
| |
| static int zynqmp_dpsub_probe(struct platform_device *pdev) |
| { |
| struct zynqmp_dpsub *dpsub; |
| int ret; |
| |
| /* Allocate private data. */ |
| dpsub = kzalloc(sizeof(*dpsub), GFP_KERNEL); |
| if (!dpsub) |
| return -ENOMEM; |
| |
| dpsub->dev = &pdev->dev; |
| platform_set_drvdata(pdev, dpsub); |
| |
| ret = dma_set_mask(dpsub->dev, DMA_BIT_MASK(ZYNQMP_DISP_MAX_DMA_BIT)); |
| if (ret) |
| return ret; |
| |
| /* Try the reserved memory. Proceed if there's none. */ |
| of_reserved_mem_device_init(&pdev->dev); |
| |
| ret = zynqmp_dpsub_init_clocks(dpsub); |
| if (ret < 0) |
| goto err_mem; |
| |
| ret = zynqmp_dpsub_parse_dt(dpsub); |
| if (ret < 0) |
| goto err_mem; |
| |
| pm_runtime_enable(&pdev->dev); |
| |
| /* |
| * DP should be probed first so that the zynqmp_disp can set the output |
| * format accordingly. |
| */ |
| ret = zynqmp_dp_probe(dpsub); |
| if (ret) |
| goto err_pm; |
| |
| ret = zynqmp_disp_probe(dpsub); |
| if (ret) |
| goto err_dp; |
| |
| if (dpsub->dma_enabled) { |
| ret = zynqmp_dpsub_drm_init(dpsub); |
| if (ret) |
| goto err_disp; |
| } else { |
| drm_bridge_add(dpsub->bridge); |
| } |
| |
| dev_info(&pdev->dev, "ZynqMP DisplayPort Subsystem driver probed"); |
| |
| return 0; |
| |
| err_disp: |
| zynqmp_disp_remove(dpsub); |
| err_dp: |
| zynqmp_dp_remove(dpsub); |
| err_pm: |
| pm_runtime_disable(&pdev->dev); |
| clk_disable_unprepare(dpsub->apb_clk); |
| err_mem: |
| of_reserved_mem_device_release(&pdev->dev); |
| if (!dpsub->drm) |
| zynqmp_dpsub_release(dpsub); |
| return ret; |
| } |
| |
| static void zynqmp_dpsub_remove(struct platform_device *pdev) |
| { |
| struct zynqmp_dpsub *dpsub = platform_get_drvdata(pdev); |
| |
| if (dpsub->drm) |
| zynqmp_dpsub_drm_cleanup(dpsub); |
| else |
| drm_bridge_remove(dpsub->bridge); |
| |
| zynqmp_disp_remove(dpsub); |
| zynqmp_dp_remove(dpsub); |
| |
| pm_runtime_disable(&pdev->dev); |
| clk_disable_unprepare(dpsub->apb_clk); |
| of_reserved_mem_device_release(&pdev->dev); |
| |
| if (!dpsub->drm) |
| zynqmp_dpsub_release(dpsub); |
| } |
| |
| static void zynqmp_dpsub_shutdown(struct platform_device *pdev) |
| { |
| struct zynqmp_dpsub *dpsub = platform_get_drvdata(pdev); |
| |
| if (!dpsub->drm) |
| return; |
| |
| drm_atomic_helper_shutdown(&dpsub->drm->dev); |
| } |
| |
| static const struct of_device_id zynqmp_dpsub_of_match[] = { |
| { .compatible = "xlnx,zynqmp-dpsub-1.7", }, |
| { /* end of table */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, zynqmp_dpsub_of_match); |
| |
| static struct platform_driver zynqmp_dpsub_driver = { |
| .probe = zynqmp_dpsub_probe, |
| .remove_new = zynqmp_dpsub_remove, |
| .shutdown = zynqmp_dpsub_shutdown, |
| .driver = { |
| .name = "zynqmp-dpsub", |
| .pm = &zynqmp_dpsub_pm_ops, |
| .of_match_table = zynqmp_dpsub_of_match, |
| }, |
| }; |
| |
| drm_module_platform_driver(zynqmp_dpsub_driver); |
| |
| MODULE_AUTHOR("Xilinx, Inc."); |
| MODULE_DESCRIPTION("ZynqMP DP Subsystem Driver"); |
| MODULE_LICENSE("GPL v2"); |