| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Touchkey driver for MELFAS MCS5000/5080 controller |
| * |
| * Copyright (C) 2010 Samsung Electronics Co.Ltd |
| * Author: HeungJun Kim <riverful.kim@samsung.com> |
| * Author: Joonyoung Shim <jy0922.shim@samsung.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/input.h> |
| #include <linux/irq.h> |
| #include <linux/slab.h> |
| #include <linux/platform_data/mcs.h> |
| #include <linux/pm.h> |
| |
| /* MCS5000 Touchkey */ |
| #define MCS5000_TOUCHKEY_STATUS 0x04 |
| #define MCS5000_TOUCHKEY_STATUS_PRESS 7 |
| #define MCS5000_TOUCHKEY_FW 0x0a |
| #define MCS5000_TOUCHKEY_BASE_VAL 0x61 |
| |
| /* MCS5080 Touchkey */ |
| #define MCS5080_TOUCHKEY_STATUS 0x00 |
| #define MCS5080_TOUCHKEY_STATUS_PRESS 3 |
| #define MCS5080_TOUCHKEY_FW 0x01 |
| #define MCS5080_TOUCHKEY_BASE_VAL 0x1 |
| |
| enum mcs_touchkey_type { |
| MCS5000_TOUCHKEY, |
| MCS5080_TOUCHKEY, |
| }; |
| |
| struct mcs_touchkey_chip { |
| unsigned int status_reg; |
| unsigned int pressbit; |
| unsigned int press_invert; |
| unsigned int baseval; |
| }; |
| |
| struct mcs_touchkey_data { |
| void (*poweron)(bool); |
| |
| struct i2c_client *client; |
| struct input_dev *input_dev; |
| struct mcs_touchkey_chip chip; |
| unsigned int key_code; |
| unsigned int key_val; |
| unsigned short keycodes[]; |
| }; |
| |
| static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id) |
| { |
| struct mcs_touchkey_data *data = dev_id; |
| struct mcs_touchkey_chip *chip = &data->chip; |
| struct i2c_client *client = data->client; |
| struct input_dev *input = data->input_dev; |
| unsigned int key_val; |
| unsigned int pressed; |
| int val; |
| |
| val = i2c_smbus_read_byte_data(client, chip->status_reg); |
| if (val < 0) { |
| dev_err(&client->dev, "i2c read error [%d]\n", val); |
| goto out; |
| } |
| |
| pressed = (val & (1 << chip->pressbit)) >> chip->pressbit; |
| if (chip->press_invert) |
| pressed ^= chip->press_invert; |
| |
| /* key_val is 0 when released, so we should use key_val of press. */ |
| if (pressed) { |
| key_val = val & (0xff >> (8 - chip->pressbit)); |
| if (!key_val) |
| goto out; |
| key_val -= chip->baseval; |
| data->key_code = data->keycodes[key_val]; |
| data->key_val = key_val; |
| } |
| |
| input_event(input, EV_MSC, MSC_SCAN, data->key_val); |
| input_report_key(input, data->key_code, pressed); |
| input_sync(input); |
| |
| dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code, |
| pressed ? "pressed" : "released"); |
| |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| static void mcs_touchkey_poweroff(void *data) |
| { |
| struct mcs_touchkey_data *touchkey = data; |
| |
| touchkey->poweron(false); |
| } |
| |
| static int mcs_touchkey_probe(struct i2c_client *client) |
| { |
| const struct i2c_device_id *id = i2c_client_get_device_id(client); |
| const struct mcs_platform_data *pdata; |
| struct mcs_touchkey_data *data; |
| struct input_dev *input_dev; |
| unsigned int fw_reg; |
| int fw_ver; |
| int error; |
| int i; |
| |
| pdata = dev_get_platdata(&client->dev); |
| if (!pdata) { |
| dev_err(&client->dev, "no platform data defined\n"); |
| return -EINVAL; |
| } |
| |
| data = devm_kzalloc(&client->dev, |
| struct_size(data, keycodes, pdata->key_maxval + 1), |
| GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| input_dev = devm_input_allocate_device(&client->dev); |
| if (!input_dev) { |
| dev_err(&client->dev, "Failed to allocate input device\n"); |
| return -ENOMEM; |
| } |
| |
| data->client = client; |
| data->input_dev = input_dev; |
| |
| if (id->driver_data == MCS5000_TOUCHKEY) { |
| data->chip.status_reg = MCS5000_TOUCHKEY_STATUS; |
| data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS; |
| data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL; |
| fw_reg = MCS5000_TOUCHKEY_FW; |
| } else { |
| data->chip.status_reg = MCS5080_TOUCHKEY_STATUS; |
| data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS; |
| data->chip.press_invert = 1; |
| data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL; |
| fw_reg = MCS5080_TOUCHKEY_FW; |
| } |
| |
| fw_ver = i2c_smbus_read_byte_data(client, fw_reg); |
| if (fw_ver < 0) { |
| dev_err(&client->dev, "i2c read error[%d]\n", fw_ver); |
| return fw_ver; |
| } |
| dev_info(&client->dev, "Firmware version: %d\n", fw_ver); |
| |
| input_dev->name = "MELFAS MCS Touchkey"; |
| input_dev->id.bustype = BUS_I2C; |
| input_dev->evbit[0] = BIT_MASK(EV_KEY); |
| if (!pdata->no_autorepeat) |
| input_dev->evbit[0] |= BIT_MASK(EV_REP); |
| input_dev->keycode = data->keycodes; |
| input_dev->keycodesize = sizeof(data->keycodes[0]); |
| input_dev->keycodemax = pdata->key_maxval + 1; |
| |
| for (i = 0; i < pdata->keymap_size; i++) { |
| unsigned int val = MCS_KEY_VAL(pdata->keymap[i]); |
| unsigned int code = MCS_KEY_CODE(pdata->keymap[i]); |
| |
| data->keycodes[val] = code; |
| __set_bit(code, input_dev->keybit); |
| } |
| |
| input_set_capability(input_dev, EV_MSC, MSC_SCAN); |
| input_set_drvdata(input_dev, data); |
| |
| if (pdata->cfg_pin) |
| pdata->cfg_pin(); |
| |
| if (pdata->poweron) { |
| data->poweron = pdata->poweron; |
| data->poweron(true); |
| |
| error = devm_add_action_or_reset(&client->dev, |
| mcs_touchkey_poweroff, data); |
| if (error) |
| return error; |
| } |
| |
| error = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, mcs_touchkey_interrupt, |
| IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| client->dev.driver->name, data); |
| if (error) { |
| dev_err(&client->dev, "Failed to register interrupt\n"); |
| return error; |
| } |
| |
| error = input_register_device(input_dev); |
| if (error) |
| return error; |
| |
| i2c_set_clientdata(client, data); |
| return 0; |
| } |
| |
| static void mcs_touchkey_shutdown(struct i2c_client *client) |
| { |
| struct mcs_touchkey_data *data = i2c_get_clientdata(client); |
| |
| if (data->poweron) |
| data->poweron(false); |
| } |
| |
| static int mcs_touchkey_suspend(struct device *dev) |
| { |
| struct mcs_touchkey_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| |
| /* Disable the work */ |
| disable_irq(client->irq); |
| |
| /* Finally turn off the power */ |
| if (data->poweron) |
| data->poweron(false); |
| |
| return 0; |
| } |
| |
| static int mcs_touchkey_resume(struct device *dev) |
| { |
| struct mcs_touchkey_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| |
| /* Enable the device first */ |
| if (data->poweron) |
| data->poweron(true); |
| |
| /* Enable irq again */ |
| enable_irq(client->irq); |
| |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(mcs_touchkey_pm_ops, |
| mcs_touchkey_suspend, mcs_touchkey_resume); |
| |
| static const struct i2c_device_id mcs_touchkey_id[] = { |
| { "mcs5000_touchkey", MCS5000_TOUCHKEY }, |
| { "mcs5080_touchkey", MCS5080_TOUCHKEY }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id); |
| |
| static struct i2c_driver mcs_touchkey_driver = { |
| .driver = { |
| .name = "mcs_touchkey", |
| .pm = pm_sleep_ptr(&mcs_touchkey_pm_ops), |
| }, |
| .probe = mcs_touchkey_probe, |
| .shutdown = mcs_touchkey_shutdown, |
| .id_table = mcs_touchkey_id, |
| }; |
| |
| module_i2c_driver(mcs_touchkey_driver); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); |
| MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); |
| MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller"); |
| MODULE_LICENSE("GPL"); |