| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * TSI driver for Dialog DA9052 |
| * |
| * Copyright(c) 2012 Dialog Semiconductor Ltd. |
| * |
| * Author: David Dajun Chen <dchen@diasemi.com> |
| */ |
| #include <linux/module.h> |
| #include <linux/input.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| |
| #include <linux/mfd/da9052/reg.h> |
| #include <linux/mfd/da9052/da9052.h> |
| |
| #define TSI_PEN_DOWN_STATUS 0x40 |
| |
| struct da9052_tsi { |
| struct da9052 *da9052; |
| struct input_dev *dev; |
| struct delayed_work ts_pen_work; |
| bool stopped; |
| bool adc_on; |
| }; |
| |
| static void da9052_ts_adc_toggle(struct da9052_tsi *tsi, bool on) |
| { |
| da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 0, on); |
| tsi->adc_on = on; |
| } |
| |
| static irqreturn_t da9052_ts_pendwn_irq(int irq, void *data) |
| { |
| struct da9052_tsi *tsi = data; |
| |
| if (!tsi->stopped) { |
| /* Mask PEN_DOWN event and unmask TSI_READY event */ |
| da9052_disable_irq_nosync(tsi->da9052, DA9052_IRQ_PENDOWN); |
| da9052_enable_irq(tsi->da9052, DA9052_IRQ_TSIREADY); |
| |
| da9052_ts_adc_toggle(tsi, true); |
| |
| schedule_delayed_work(&tsi->ts_pen_work, HZ / 50); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void da9052_ts_read(struct da9052_tsi *tsi) |
| { |
| struct input_dev *input = tsi->dev; |
| int ret; |
| u16 x, y, z; |
| u8 v; |
| |
| ret = da9052_reg_read(tsi->da9052, DA9052_TSI_X_MSB_REG); |
| if (ret < 0) |
| return; |
| |
| x = (u16) ret; |
| |
| ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Y_MSB_REG); |
| if (ret < 0) |
| return; |
| |
| y = (u16) ret; |
| |
| ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Z_MSB_REG); |
| if (ret < 0) |
| return; |
| |
| z = (u16) ret; |
| |
| ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG); |
| if (ret < 0) |
| return; |
| |
| v = (u8) ret; |
| |
| x = ((x << 2) & 0x3fc) | (v & 0x3); |
| y = ((y << 2) & 0x3fc) | ((v & 0xc) >> 2); |
| z = ((z << 2) & 0x3fc) | ((v & 0x30) >> 4); |
| |
| input_report_key(input, BTN_TOUCH, 1); |
| input_report_abs(input, ABS_X, x); |
| input_report_abs(input, ABS_Y, y); |
| input_report_abs(input, ABS_PRESSURE, z); |
| input_sync(input); |
| } |
| |
| static irqreturn_t da9052_ts_datardy_irq(int irq, void *data) |
| { |
| struct da9052_tsi *tsi = data; |
| |
| da9052_ts_read(tsi); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void da9052_ts_pen_work(struct work_struct *work) |
| { |
| struct da9052_tsi *tsi = container_of(work, struct da9052_tsi, |
| ts_pen_work.work); |
| if (!tsi->stopped) { |
| int ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG); |
| if (ret < 0 || (ret & TSI_PEN_DOWN_STATUS)) { |
| /* Pen is still DOWN (or read error) */ |
| schedule_delayed_work(&tsi->ts_pen_work, HZ / 50); |
| } else { |
| struct input_dev *input = tsi->dev; |
| |
| /* Pen UP */ |
| da9052_ts_adc_toggle(tsi, false); |
| |
| /* Report Pen UP */ |
| input_report_key(input, BTN_TOUCH, 0); |
| input_report_abs(input, ABS_PRESSURE, 0); |
| input_sync(input); |
| |
| /* |
| * FIXME: Fixes the unhandled irq issue when quick |
| * pen down and pen up events occurs |
| */ |
| ret = da9052_reg_update(tsi->da9052, |
| DA9052_EVENT_B_REG, 0xC0, 0xC0); |
| if (ret < 0) |
| return; |
| |
| /* Mask TSI_READY event and unmask PEN_DOWN event */ |
| da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY); |
| da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN); |
| } |
| } |
| } |
| |
| static int da9052_ts_configure_gpio(struct da9052 *da9052) |
| { |
| int error; |
| |
| error = da9052_reg_update(da9052, DA9052_GPIO_2_3_REG, 0x30, 0); |
| if (error < 0) |
| return error; |
| |
| error = da9052_reg_update(da9052, DA9052_GPIO_4_5_REG, 0x33, 0); |
| if (error < 0) |
| return error; |
| |
| error = da9052_reg_update(da9052, DA9052_GPIO_6_7_REG, 0x33, 0); |
| if (error < 0) |
| return error; |
| |
| return 0; |
| } |
| |
| static int da9052_configure_tsi(struct da9052_tsi *tsi) |
| { |
| int error; |
| |
| error = da9052_ts_configure_gpio(tsi->da9052); |
| if (error) |
| return error; |
| |
| /* Measure TSI sample every 1ms */ |
| error = da9052_reg_update(tsi->da9052, DA9052_ADC_CONT_REG, |
| 1 << 6, 1 << 6); |
| if (error < 0) |
| return error; |
| |
| /* TSI_DELAY: 3 slots, TSI_SKIP: 0 slots, TSI_MODE: XYZP */ |
| error = da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 0xFC, 0xC0); |
| if (error < 0) |
| return error; |
| |
| /* Supply TSIRef through LD09 */ |
| error = da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x59); |
| if (error < 0) |
| return error; |
| |
| return 0; |
| } |
| |
| static int da9052_ts_input_open(struct input_dev *input_dev) |
| { |
| struct da9052_tsi *tsi = input_get_drvdata(input_dev); |
| |
| tsi->stopped = false; |
| mb(); |
| |
| /* Unmask PEN_DOWN event */ |
| da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN); |
| |
| /* Enable Pen Detect Circuit */ |
| return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, |
| 1 << 1, 1 << 1); |
| } |
| |
| static void da9052_ts_input_close(struct input_dev *input_dev) |
| { |
| struct da9052_tsi *tsi = input_get_drvdata(input_dev); |
| |
| tsi->stopped = true; |
| mb(); |
| da9052_disable_irq(tsi->da9052, DA9052_IRQ_PENDOWN); |
| cancel_delayed_work_sync(&tsi->ts_pen_work); |
| |
| if (tsi->adc_on) { |
| da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY); |
| da9052_ts_adc_toggle(tsi, false); |
| |
| /* |
| * If ADC was on that means that pendwn IRQ was disabled |
| * twice and we need to enable it to keep enable/disable |
| * counter balanced. IRQ is still off though. |
| */ |
| da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN); |
| } |
| |
| /* Disable Pen Detect Circuit */ |
| da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0); |
| } |
| |
| static int da9052_ts_probe(struct platform_device *pdev) |
| { |
| struct da9052 *da9052; |
| struct da9052_tsi *tsi; |
| struct input_dev *input_dev; |
| int error; |
| |
| da9052 = dev_get_drvdata(pdev->dev.parent); |
| if (!da9052) |
| return -EINVAL; |
| |
| tsi = kzalloc(sizeof(struct da9052_tsi), GFP_KERNEL); |
| input_dev = input_allocate_device(); |
| if (!tsi || !input_dev) { |
| error = -ENOMEM; |
| goto err_free_mem; |
| } |
| |
| tsi->da9052 = da9052; |
| tsi->dev = input_dev; |
| tsi->stopped = true; |
| INIT_DELAYED_WORK(&tsi->ts_pen_work, da9052_ts_pen_work); |
| |
| input_dev->id.version = 0x0101; |
| input_dev->id.vendor = 0x15B6; |
| input_dev->id.product = 0x9052; |
| input_dev->name = "Dialog DA9052 TouchScreen Driver"; |
| input_dev->dev.parent = &pdev->dev; |
| input_dev->open = da9052_ts_input_open; |
| input_dev->close = da9052_ts_input_close; |
| |
| __set_bit(EV_ABS, input_dev->evbit); |
| __set_bit(EV_KEY, input_dev->evbit); |
| __set_bit(BTN_TOUCH, input_dev->keybit); |
| |
| input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0); |
| input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0); |
| input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1023, 0, 0); |
| |
| input_set_drvdata(input_dev, tsi); |
| |
| /* Disable Pen Detect Circuit */ |
| da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0); |
| |
| /* Disable ADC */ |
| da9052_ts_adc_toggle(tsi, false); |
| |
| error = da9052_request_irq(tsi->da9052, DA9052_IRQ_PENDOWN, |
| "pendown-irq", da9052_ts_pendwn_irq, tsi); |
| if (error) { |
| dev_err(tsi->da9052->dev, |
| "Failed to register PENDWN IRQ: %d\n", error); |
| goto err_free_mem; |
| } |
| |
| error = da9052_request_irq(tsi->da9052, DA9052_IRQ_TSIREADY, |
| "tsiready-irq", da9052_ts_datardy_irq, tsi); |
| if (error) { |
| dev_err(tsi->da9052->dev, |
| "Failed to register TSIRDY IRQ :%d\n", error); |
| goto err_free_pendwn_irq; |
| } |
| |
| /* Mask PEN_DOWN and TSI_READY events */ |
| da9052_disable_irq(tsi->da9052, DA9052_IRQ_PENDOWN); |
| da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY); |
| |
| error = da9052_configure_tsi(tsi); |
| if (error) |
| goto err_free_datardy_irq; |
| |
| error = input_register_device(tsi->dev); |
| if (error) |
| goto err_free_datardy_irq; |
| |
| platform_set_drvdata(pdev, tsi); |
| |
| return 0; |
| |
| err_free_datardy_irq: |
| da9052_free_irq(tsi->da9052, DA9052_IRQ_TSIREADY, tsi); |
| err_free_pendwn_irq: |
| da9052_free_irq(tsi->da9052, DA9052_IRQ_PENDOWN, tsi); |
| err_free_mem: |
| kfree(tsi); |
| input_free_device(input_dev); |
| |
| return error; |
| } |
| |
| static void da9052_ts_remove(struct platform_device *pdev) |
| { |
| struct da9052_tsi *tsi = platform_get_drvdata(pdev); |
| |
| da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x19); |
| |
| da9052_free_irq(tsi->da9052, DA9052_IRQ_TSIREADY, tsi); |
| da9052_free_irq(tsi->da9052, DA9052_IRQ_PENDOWN, tsi); |
| |
| input_unregister_device(tsi->dev); |
| kfree(tsi); |
| } |
| |
| static struct platform_driver da9052_tsi_driver = { |
| .probe = da9052_ts_probe, |
| .remove_new = da9052_ts_remove, |
| .driver = { |
| .name = "da9052-tsi", |
| }, |
| }; |
| |
| module_platform_driver(da9052_tsi_driver); |
| |
| MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9052"); |
| MODULE_AUTHOR("Anthony Olech <Anthony.Olech@diasemi.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:da9052-tsi"); |