| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Zoran ZR36050 basic configuration functions |
| * |
| * Copyright (C) 2001 Wolfgang Scherr <scherr@net4you.at> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| |
| #include <linux/types.h> |
| #include <linux/wait.h> |
| |
| /* I/O commands, error codes */ |
| #include <linux/io.h> |
| |
| /* headerfile of this module */ |
| #include "zr36050.h" |
| |
| /* codec io API */ |
| #include "videocodec.h" |
| |
| /* |
| * it doesn't make sense to have more than 20 or so, |
| * just to prevent some unwanted loops |
| */ |
| #define MAX_CODECS 20 |
| |
| /* amount of chips attached via this driver */ |
| static int zr36050_codecs; |
| |
| /* |
| * Local hardware I/O functions: |
| * |
| * read/write via codec layer (registers are located in the master device) |
| */ |
| |
| /* read and write functions */ |
| static u8 zr36050_read(struct zr36050 *ptr, u16 reg) |
| { |
| struct zoran *zr = videocodec_to_zoran(ptr->codec); |
| u8 value = 0; |
| |
| /* just in case something is wrong... */ |
| if (ptr->codec->master_data->readreg) |
| value = (ptr->codec->master_data->readreg(ptr->codec, reg)) & 0xFF; |
| else |
| zrdev_err(zr, "%s: invalid I/O setup, nothing read!\n", ptr->name); |
| |
| zrdev_dbg(zr, "%s: reading from 0x%04x: %02x\n", ptr->name, reg, value); |
| |
| return value; |
| } |
| |
| static void zr36050_write(struct zr36050 *ptr, u16 reg, u8 value) |
| { |
| struct zoran *zr = videocodec_to_zoran(ptr->codec); |
| |
| zrdev_dbg(zr, "%s: writing 0x%02x to 0x%04x\n", ptr->name, value, reg); |
| |
| /* just in case something is wrong... */ |
| if (ptr->codec->master_data->writereg) |
| ptr->codec->master_data->writereg(ptr->codec, reg, value); |
| else |
| zrdev_err(zr, "%s: invalid I/O setup, nothing written!\n", |
| ptr->name); |
| } |
| |
| /* status is kept in datastructure */ |
| static u8 zr36050_read_status1(struct zr36050 *ptr) |
| { |
| ptr->status1 = zr36050_read(ptr, ZR050_STATUS_1); |
| |
| zr36050_read(ptr, 0); |
| return ptr->status1; |
| } |
| |
| /* scale factor is kept in datastructure */ |
| static u16 zr36050_read_scalefactor(struct zr36050 *ptr) |
| { |
| ptr->scalefact = (zr36050_read(ptr, ZR050_SF_HI) << 8) | |
| (zr36050_read(ptr, ZR050_SF_LO) & 0xFF); |
| |
| /* leave 0 selected for an eventually GO from master */ |
| zr36050_read(ptr, 0); |
| return ptr->scalefact; |
| } |
| |
| /* |
| * Local helper function: |
| * |
| * wait if codec is ready to proceed (end of processing) or time is over |
| */ |
| |
| static void zr36050_wait_end(struct zr36050 *ptr) |
| { |
| struct zoran *zr = videocodec_to_zoran(ptr->codec); |
| int i = 0; |
| |
| while (!(zr36050_read_status1(ptr) & 0x4)) { |
| udelay(1); |
| if (i++ > 200000) { // 200ms, there is for sure something wrong!!! |
| zrdev_err(zr, |
| "%s: timeout at wait_end (last status: 0x%02x)\n", |
| ptr->name, ptr->status1); |
| break; |
| } |
| } |
| } |
| |
| /* |
| * Local helper function: basic test of "connectivity", writes/reads |
| * to/from memory the SOF marker |
| */ |
| |
| static int zr36050_basic_test(struct zr36050 *ptr) |
| { |
| struct zoran *zr = videocodec_to_zoran(ptr->codec); |
| |
| zr36050_write(ptr, ZR050_SOF_IDX, 0x00); |
| zr36050_write(ptr, ZR050_SOF_IDX + 1, 0x00); |
| if ((zr36050_read(ptr, ZR050_SOF_IDX) | |
| zr36050_read(ptr, ZR050_SOF_IDX + 1)) != 0x0000) { |
| zrdev_err(zr, |
| "%s: attach failed, can't connect to jpeg processor!\n", |
| ptr->name); |
| return -ENXIO; |
| } |
| zr36050_write(ptr, ZR050_SOF_IDX, 0xff); |
| zr36050_write(ptr, ZR050_SOF_IDX + 1, 0xc0); |
| if (((zr36050_read(ptr, ZR050_SOF_IDX) << 8) | |
| zr36050_read(ptr, ZR050_SOF_IDX + 1)) != 0xffc0) { |
| zrdev_err(zr, |
| "%s: attach failed, can't connect to jpeg processor!\n", |
| ptr->name); |
| return -ENXIO; |
| } |
| |
| zr36050_wait_end(ptr); |
| if ((ptr->status1 & 0x4) == 0) { |
| zrdev_err(zr, |
| "%s: attach failed, jpeg processor failed (end flag)!\n", |
| ptr->name); |
| return -EBUSY; |
| } |
| |
| return 0; /* looks good! */ |
| } |
| |
| /* Local helper function: simple loop for pushing the init datasets */ |
| |
| static int zr36050_pushit(struct zr36050 *ptr, u16 startreg, u16 len, const char *data) |
| { |
| struct zoran *zr = videocodec_to_zoran(ptr->codec); |
| int i = 0; |
| |
| zrdev_dbg(zr, "%s: write data block to 0x%04x (len=%d)\n", ptr->name, |
| startreg, len); |
| while (i < len) |
| zr36050_write(ptr, startreg++, data[i++]); |
| |
| return i; |
| } |
| |
| /* |
| * Basic datasets: |
| * |
| * jpeg baseline setup data (you find it on lots places in internet, or just |
| * extract it from any regular .jpg image...) |
| * |
| * Could be variable, but until it's not needed it they are just fixed to save |
| * memory. Otherwise expand zr36050 structure with arrays, push the values to |
| * it and initialize from there, as e.g. the linux zr36057/60 driver does it. |
| */ |
| |
| static const char zr36050_dqt[0x86] = { |
| 0xff, 0xdb, //Marker: DQT |
| 0x00, 0x84, //Length: 2*65+2 |
| 0x00, //Pq,Tq first table |
| 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, |
| 0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, |
| 0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25, |
| 0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33, |
| 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44, |
| 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, |
| 0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, |
| 0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63, |
| 0x01, //Pq,Tq second table |
| 0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a, |
| 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63, |
| 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, |
| 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, |
| 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, |
| 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, |
| 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, |
| 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63 |
| }; |
| |
| static const char zr36050_dht[0x1a4] = { |
| 0xff, 0xc4, //Marker: DHT |
| 0x01, 0xa2, //Length: 2*AC, 2*DC |
| 0x00, //DC first table |
| 0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01, |
| 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, |
| 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, |
| 0x01, //DC second table |
| 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, |
| 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, |
| 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, |
| 0x10, //AC first table |
| 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03, |
| 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, |
| 0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, |
| 0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, |
| 0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1, |
| 0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24, |
| 0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17, |
| 0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34, |
| 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, |
| 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, |
| 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, |
| 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, |
| 0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, |
| 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, |
| 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, |
| 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9, |
| 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, |
| 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9, |
| 0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, |
| 0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, |
| 0xF8, 0xF9, 0xFA, |
| 0x11, //AC second table |
| 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04, |
| 0x07, 0x05, 0x04, 0x04, 0x00, 0x01, |
| 0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, |
| 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, |
| 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, |
| 0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62, |
| 0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25, |
| 0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A, |
| 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44, |
| 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56, |
| 0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66, |
| 0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, |
| 0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, |
| 0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, |
| 0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, |
| 0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, |
| 0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, |
| 0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, |
| 0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, |
| 0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8, |
| 0xF9, 0xFA |
| }; |
| |
| /* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */ |
| #define NO_OF_COMPONENTS 0x3 //Y,U,V |
| #define BASELINE_PRECISION 0x8 //MCU size (?) |
| static const char zr36050_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's QT |
| static const char zr36050_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's DC |
| static const char zr36050_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 }; //table idx's AC |
| |
| /* horizontal 422 decimation setup (maybe we support 411 or so later, too) */ |
| static const char zr36050_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 }; |
| static const char zr36050_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 }; |
| |
| /* |
| * Local helper functions: |
| * |
| * calculation and setup of parameter-dependent JPEG baseline segments |
| * (needed for compression only) |
| */ |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* |
| * SOF (start of frame) segment depends on width, height and sampling ratio |
| * of each color component |
| */ |
| static int zr36050_set_sof(struct zr36050 *ptr) |
| { |
| struct zoran *zr = videocodec_to_zoran(ptr->codec); |
| char sof_data[34]; // max. size of register set |
| int i; |
| |
| zrdev_dbg(zr, "%s: write SOF (%dx%d, %d components)\n", ptr->name, |
| ptr->width, ptr->height, NO_OF_COMPONENTS); |
| sof_data[0] = 0xff; |
| sof_data[1] = 0xc0; |
| sof_data[2] = 0x00; |
| sof_data[3] = (3 * NO_OF_COMPONENTS) + 8; |
| sof_data[4] = BASELINE_PRECISION; // only '8' possible with zr36050 |
| sof_data[5] = (ptr->height) >> 8; |
| sof_data[6] = (ptr->height) & 0xff; |
| sof_data[7] = (ptr->width) >> 8; |
| sof_data[8] = (ptr->width) & 0xff; |
| sof_data[9] = NO_OF_COMPONENTS; |
| for (i = 0; i < NO_OF_COMPONENTS; i++) { |
| sof_data[10 + (i * 3)] = i; // index identifier |
| sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) | |
| (ptr->v_samp_ratio[i]); // sampling ratios |
| sof_data[12 + (i * 3)] = zr36050_tq[i]; // Q table selection |
| } |
| return zr36050_pushit(ptr, ZR050_SOF_IDX, |
| (3 * NO_OF_COMPONENTS) + 10, sof_data); |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* |
| * SOS (start of scan) segment depends on the used scan components |
| * of each color component |
| */ |
| |
| static int zr36050_set_sos(struct zr36050 *ptr) |
| { |
| struct zoran *zr = videocodec_to_zoran(ptr->codec); |
| char sos_data[16]; // max. size of register set |
| int i; |
| |
| zrdev_dbg(zr, "%s: write SOS\n", ptr->name); |
| sos_data[0] = 0xff; |
| sos_data[1] = 0xda; |
| sos_data[2] = 0x00; |
| sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3; |
| sos_data[4] = NO_OF_COMPONENTS; |
| for (i = 0; i < NO_OF_COMPONENTS; i++) { |
| sos_data[5 + (i * 2)] = i; // index |
| sos_data[6 + (i * 2)] = (zr36050_td[i] << 4) | zr36050_ta[i]; // AC/DC tbl.sel. |
| } |
| sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00; // scan start |
| sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3F; |
| sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00; |
| return zr36050_pushit(ptr, ZR050_SOS1_IDX, |
| 4 + 1 + (2 * NO_OF_COMPONENTS) + 3, |
| sos_data); |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* DRI (define restart interval) */ |
| |
| static int zr36050_set_dri(struct zr36050 *ptr) |
| { |
| struct zoran *zr = videocodec_to_zoran(ptr->codec); |
| char dri_data[6]; // max. size of register set |
| |
| zrdev_dbg(zr, "%s: write DRI\n", ptr->name); |
| dri_data[0] = 0xff; |
| dri_data[1] = 0xdd; |
| dri_data[2] = 0x00; |
| dri_data[3] = 0x04; |
| dri_data[4] = ptr->dri >> 8; |
| dri_data[5] = ptr->dri & 0xff; |
| return zr36050_pushit(ptr, ZR050_DRI_IDX, 6, dri_data); |
| } |
| |
| /* |
| * Setup function: |
| * |
| * Setup compression/decompression of Zoran's JPEG processor |
| * ( see also zoran 36050 manual ) |
| * |
| * ... sorry for the spaghetti code ... |
| */ |
| static void zr36050_init(struct zr36050 *ptr) |
| { |
| int sum = 0; |
| long bitcnt, tmp; |
| struct zoran *zr = videocodec_to_zoran(ptr->codec); |
| |
| if (ptr->mode == CODEC_DO_COMPRESSION) { |
| zrdev_dbg(zr, "%s: COMPRESSION SETUP\n", ptr->name); |
| |
| /* 050 communicates with 057 in master mode */ |
| zr36050_write(ptr, ZR050_HARDWARE, ZR050_HW_MSTR); |
| |
| /* encoding table preload for compression */ |
| zr36050_write(ptr, ZR050_MODE, |
| ZR050_MO_COMP | ZR050_MO_TLM); |
| zr36050_write(ptr, ZR050_OPTIONS, 0); |
| |
| /* disable all IRQs */ |
| zr36050_write(ptr, ZR050_INT_REQ_0, 0); |
| zr36050_write(ptr, ZR050_INT_REQ_1, 3); // low 2 bits always 1 |
| |
| /* volume control settings */ |
| /*zr36050_write(ptr, ZR050_MBCV, ptr->max_block_vol);*/ |
| zr36050_write(ptr, ZR050_SF_HI, ptr->scalefact >> 8); |
| zr36050_write(ptr, ZR050_SF_LO, ptr->scalefact & 0xff); |
| |
| zr36050_write(ptr, ZR050_AF_HI, 0xff); |
| zr36050_write(ptr, ZR050_AF_M, 0xff); |
| zr36050_write(ptr, ZR050_AF_LO, 0xff); |
| |
| /* setup the variable jpeg tables */ |
| sum += zr36050_set_sof(ptr); |
| sum += zr36050_set_sos(ptr); |
| sum += zr36050_set_dri(ptr); |
| |
| /* |
| * setup the fixed jpeg tables - maybe variable, though - |
| * (see table init section above) |
| */ |
| zrdev_dbg(zr, "%s: write DQT, DHT, APP\n", ptr->name); |
| sum += zr36050_pushit(ptr, ZR050_DQT_IDX, |
| sizeof(zr36050_dqt), zr36050_dqt); |
| sum += zr36050_pushit(ptr, ZR050_DHT_IDX, |
| sizeof(zr36050_dht), zr36050_dht); |
| zr36050_write(ptr, ZR050_APP_IDX, 0xff); |
| zr36050_write(ptr, ZR050_APP_IDX + 1, 0xe0 + ptr->app.appn); |
| zr36050_write(ptr, ZR050_APP_IDX + 2, 0x00); |
| zr36050_write(ptr, ZR050_APP_IDX + 3, ptr->app.len + 2); |
| sum += zr36050_pushit(ptr, ZR050_APP_IDX + 4, 60, |
| ptr->app.data) + 4; |
| zr36050_write(ptr, ZR050_COM_IDX, 0xff); |
| zr36050_write(ptr, ZR050_COM_IDX + 1, 0xfe); |
| zr36050_write(ptr, ZR050_COM_IDX + 2, 0x00); |
| zr36050_write(ptr, ZR050_COM_IDX + 3, ptr->com.len + 2); |
| sum += zr36050_pushit(ptr, ZR050_COM_IDX + 4, 60, |
| ptr->com.data) + 4; |
| |
| /* do the internal huffman table preload */ |
| zr36050_write(ptr, ZR050_MARKERS_EN, ZR050_ME_DHTI); |
| |
| zr36050_write(ptr, ZR050_GO, 1); // launch codec |
| zr36050_wait_end(ptr); |
| zrdev_dbg(zr, "%s: Status after table preload: 0x%02x\n", |
| ptr->name, ptr->status1); |
| |
| if ((ptr->status1 & 0x4) == 0) { |
| zrdev_err(zr, "%s: init aborted!\n", ptr->name); |
| return; // something is wrong, its timed out!!!! |
| } |
| |
| /* setup misc. data for compression (target code sizes) */ |
| |
| /* size of compressed code to reach without header data */ |
| sum = ptr->real_code_vol - sum; |
| bitcnt = sum << 3; /* need the size in bits */ |
| |
| tmp = bitcnt >> 16; |
| zrdev_dbg(zr, |
| "%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n", |
| ptr->name, sum, ptr->real_code_vol, bitcnt, tmp); |
| zr36050_write(ptr, ZR050_TCV_NET_HI, tmp >> 8); |
| zr36050_write(ptr, ZR050_TCV_NET_MH, tmp & 0xff); |
| tmp = bitcnt & 0xffff; |
| zr36050_write(ptr, ZR050_TCV_NET_ML, tmp >> 8); |
| zr36050_write(ptr, ZR050_TCV_NET_LO, tmp & 0xff); |
| |
| bitcnt -= bitcnt >> 7; // bits without stuffing |
| bitcnt -= ((bitcnt * 5) >> 6); // bits without eob |
| |
| tmp = bitcnt >> 16; |
| zrdev_dbg(zr, "%s: code: nettobit=%ld, highnettobits=%ld\n", |
| ptr->name, bitcnt, tmp); |
| zr36050_write(ptr, ZR050_TCV_DATA_HI, tmp >> 8); |
| zr36050_write(ptr, ZR050_TCV_DATA_MH, tmp & 0xff); |
| tmp = bitcnt & 0xffff; |
| zr36050_write(ptr, ZR050_TCV_DATA_ML, tmp >> 8); |
| zr36050_write(ptr, ZR050_TCV_DATA_LO, tmp & 0xff); |
| |
| /* compression setup with or without bitrate control */ |
| zr36050_write(ptr, ZR050_MODE, |
| ZR050_MO_COMP | ZR050_MO_PASS2 | |
| (ptr->bitrate_ctrl ? ZR050_MO_BRC : 0)); |
| |
| /* this headers seem to deliver "valid AVI" jpeg frames */ |
| zr36050_write(ptr, ZR050_MARKERS_EN, |
| ZR050_ME_DQT | ZR050_ME_DHT | |
| ((ptr->app.len > 0) ? ZR050_ME_APP : 0) | |
| ((ptr->com.len > 0) ? ZR050_ME_COM : 0)); |
| } else { |
| zrdev_dbg(zr, "%s: EXPANSION SETUP\n", ptr->name); |
| |
| /* 050 communicates with 055 in master mode */ |
| zr36050_write(ptr, ZR050_HARDWARE, |
| ZR050_HW_MSTR | ZR050_HW_CFIS_2_CLK); |
| |
| /* encoding table preload */ |
| zr36050_write(ptr, ZR050_MODE, ZR050_MO_TLM); |
| |
| /* disable all IRQs */ |
| zr36050_write(ptr, ZR050_INT_REQ_0, 0); |
| zr36050_write(ptr, ZR050_INT_REQ_1, 3); // low 2 bits always 1 |
| |
| zrdev_dbg(zr, "%s: write DHT\n", ptr->name); |
| zr36050_pushit(ptr, ZR050_DHT_IDX, sizeof(zr36050_dht), |
| zr36050_dht); |
| |
| /* do the internal huffman table preload */ |
| zr36050_write(ptr, ZR050_MARKERS_EN, ZR050_ME_DHTI); |
| |
| zr36050_write(ptr, ZR050_GO, 1); // launch codec |
| zr36050_wait_end(ptr); |
| zrdev_dbg(zr, "%s: Status after table preload: 0x%02x\n", |
| ptr->name, ptr->status1); |
| |
| if ((ptr->status1 & 0x4) == 0) { |
| zrdev_err(zr, "%s: init aborted!\n", ptr->name); |
| return; // something is wrong, its timed out!!!! |
| } |
| |
| /* setup misc. data for expansion */ |
| zr36050_write(ptr, ZR050_MODE, 0); |
| zr36050_write(ptr, ZR050_MARKERS_EN, 0); |
| } |
| |
| /* adr on selected, to allow GO from master */ |
| zr36050_read(ptr, 0); |
| } |
| |
| /* |
| * CODEC API FUNCTIONS |
| * |
| * this functions are accessed by the master via the API structure |
| */ |
| |
| /* |
| * set compression/expansion mode and launches codec - |
| * this should be the last call from the master before starting processing |
| */ |
| static int zr36050_set_mode(struct videocodec *codec, int mode) |
| { |
| struct zr36050 *ptr = (struct zr36050 *)codec->data; |
| struct zoran *zr = videocodec_to_zoran(codec); |
| |
| zrdev_dbg(zr, "%s: set_mode %d call\n", ptr->name, mode); |
| |
| if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION)) |
| return -EINVAL; |
| |
| ptr->mode = mode; |
| zr36050_init(ptr); |
| |
| return 0; |
| } |
| |
| /* set picture size (norm is ignored as the codec doesn't know about it) */ |
| static int zr36050_set_video(struct videocodec *codec, const struct tvnorm *norm, |
| struct vfe_settings *cap, struct vfe_polarity *pol) |
| { |
| struct zr36050 *ptr = (struct zr36050 *)codec->data; |
| struct zoran *zr = videocodec_to_zoran(codec); |
| int size; |
| |
| zrdev_dbg(zr, "%s: set_video %d.%d, %d/%d-%dx%d (0x%x) q%d call\n", |
| ptr->name, norm->h_start, norm->v_start, |
| cap->x, cap->y, cap->width, cap->height, |
| cap->decimation, cap->quality); |
| /* |
| * trust the master driver that it knows what it does - so |
| * we allow invalid startx/y and norm for now ... |
| */ |
| ptr->width = cap->width / (cap->decimation & 0xff); |
| ptr->height = cap->height / ((cap->decimation >> 8) & 0xff); |
| |
| /* (KM) JPEG quality */ |
| size = ptr->width * ptr->height; |
| size *= 16; /* size in bits */ |
| /* apply quality setting */ |
| size = size * cap->quality / 200; |
| |
| /* Minimum: 1kb */ |
| if (size < 8192) |
| size = 8192; |
| /* Maximum: 7/8 of code buffer */ |
| if (size > ptr->total_code_vol * 7) |
| size = ptr->total_code_vol * 7; |
| |
| ptr->real_code_vol = size >> 3; /* in bytes */ |
| |
| /* |
| * Set max_block_vol here (previously in zr36050_init, moved |
| * here for consistency with zr36060 code |
| */ |
| zr36050_write(ptr, ZR050_MBCV, ptr->max_block_vol); |
| |
| return 0; |
| } |
| |
| /* additional control functions */ |
| static int zr36050_control(struct videocodec *codec, int type, int size, void *data) |
| { |
| struct zr36050 *ptr = (struct zr36050 *)codec->data; |
| struct zoran *zr = videocodec_to_zoran(codec); |
| int *ival = (int *)data; |
| |
| zrdev_dbg(zr, "%s: control %d call with %d byte\n", ptr->name, type, |
| size); |
| |
| switch (type) { |
| case CODEC_G_STATUS: /* get last status */ |
| if (size != sizeof(int)) |
| return -EFAULT; |
| zr36050_read_status1(ptr); |
| *ival = ptr->status1; |
| break; |
| |
| case CODEC_G_CODEC_MODE: |
| if (size != sizeof(int)) |
| return -EFAULT; |
| *ival = CODEC_MODE_BJPG; |
| break; |
| |
| case CODEC_S_CODEC_MODE: |
| if (size != sizeof(int)) |
| return -EFAULT; |
| if (*ival != CODEC_MODE_BJPG) |
| return -EINVAL; |
| /* not needed, do nothing */ |
| return 0; |
| |
| case CODEC_G_VFE: |
| case CODEC_S_VFE: |
| /* not needed, do nothing */ |
| return 0; |
| |
| case CODEC_S_MMAP: |
| /* not available, give an error */ |
| return -ENXIO; |
| |
| case CODEC_G_JPEG_TDS_BYTE: /* get target volume in byte */ |
| if (size != sizeof(int)) |
| return -EFAULT; |
| *ival = ptr->total_code_vol; |
| break; |
| |
| case CODEC_S_JPEG_TDS_BYTE: /* get target volume in byte */ |
| if (size != sizeof(int)) |
| return -EFAULT; |
| ptr->total_code_vol = *ival; |
| ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3; |
| break; |
| |
| case CODEC_G_JPEG_SCALE: /* get scaling factor */ |
| if (size != sizeof(int)) |
| return -EFAULT; |
| *ival = zr36050_read_scalefactor(ptr); |
| break; |
| |
| case CODEC_S_JPEG_SCALE: /* set scaling factor */ |
| if (size != sizeof(int)) |
| return -EFAULT; |
| ptr->scalefact = *ival; |
| break; |
| |
| case CODEC_G_JPEG_APP_DATA: { /* get appn marker data */ |
| struct jpeg_app_marker *app = data; |
| |
| if (size != sizeof(struct jpeg_app_marker)) |
| return -EFAULT; |
| |
| *app = ptr->app; |
| break; |
| } |
| |
| case CODEC_S_JPEG_APP_DATA: { /* set appn marker data */ |
| struct jpeg_app_marker *app = data; |
| |
| if (size != sizeof(struct jpeg_app_marker)) |
| return -EFAULT; |
| |
| ptr->app = *app; |
| break; |
| } |
| |
| case CODEC_G_JPEG_COM_DATA: { /* get comment marker data */ |
| struct jpeg_com_marker *com = data; |
| |
| if (size != sizeof(struct jpeg_com_marker)) |
| return -EFAULT; |
| |
| *com = ptr->com; |
| break; |
| } |
| |
| case CODEC_S_JPEG_COM_DATA: { /* set comment marker data */ |
| struct jpeg_com_marker *com = data; |
| |
| if (size != sizeof(struct jpeg_com_marker)) |
| return -EFAULT; |
| |
| ptr->com = *com; |
| break; |
| } |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return size; |
| } |
| |
| /* Exit and unregister function: Deinitializes Zoran's JPEG processor */ |
| |
| static int zr36050_unset(struct videocodec *codec) |
| { |
| struct zr36050 *ptr = codec->data; |
| struct zoran *zr = videocodec_to_zoran(codec); |
| |
| if (ptr) { |
| /* do wee need some codec deinit here, too ???? */ |
| |
| zrdev_dbg(zr, "%s: finished codec #%d\n", ptr->name, |
| ptr->num); |
| kfree(ptr); |
| codec->data = NULL; |
| |
| zr36050_codecs--; |
| return 0; |
| } |
| |
| return -EFAULT; |
| } |
| |
| /* |
| * Setup and registry function: |
| * |
| * Initializes Zoran's JPEG processor |
| * |
| * Also sets pixel size, average code size, mode (compr./decompr.) |
| * (the given size is determined by the processor with the video interface) |
| */ |
| |
| static int zr36050_setup(struct videocodec *codec) |
| { |
| struct zr36050 *ptr; |
| struct zoran *zr = videocodec_to_zoran(codec); |
| int res; |
| |
| zrdev_dbg(zr, "zr36050: initializing MJPEG subsystem #%d.\n", |
| zr36050_codecs); |
| |
| if (zr36050_codecs == MAX_CODECS) { |
| zrdev_err(zr, |
| "zr36050: Can't attach more codecs!\n"); |
| return -ENOSPC; |
| } |
| //mem structure init |
| ptr = kzalloc(sizeof(*ptr), GFP_KERNEL); |
| codec->data = ptr; |
| if (!ptr) |
| return -ENOMEM; |
| |
| snprintf(ptr->name, sizeof(ptr->name), "zr36050[%d]", |
| zr36050_codecs); |
| ptr->num = zr36050_codecs++; |
| ptr->codec = codec; |
| |
| //testing |
| res = zr36050_basic_test(ptr); |
| if (res < 0) { |
| zr36050_unset(codec); |
| return res; |
| } |
| //final setup |
| memcpy(ptr->h_samp_ratio, zr36050_decimation_h, 8); |
| memcpy(ptr->v_samp_ratio, zr36050_decimation_v, 8); |
| |
| /* 0 or 1 - fixed file size flag (what is the difference?) */ |
| ptr->bitrate_ctrl = 0; |
| ptr->mode = CODEC_DO_COMPRESSION; |
| ptr->width = 384; |
| ptr->height = 288; |
| ptr->total_code_vol = 16000; |
| ptr->max_block_vol = 240; |
| ptr->scalefact = 0x100; |
| ptr->dri = 1; |
| |
| /* no app/com marker by default */ |
| ptr->app.appn = 0; |
| ptr->app.len = 0; |
| ptr->com.len = 0; |
| |
| zr36050_init(ptr); |
| |
| zrdev_info(zr, "%s: codec attached and running\n", |
| ptr->name); |
| |
| return 0; |
| } |
| |
| static const struct videocodec zr36050_codec = { |
| .name = "zr36050", |
| .magic = 0L, // magic not used |
| .flags = |
| CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER | |
| CODEC_FLAG_DECODER, |
| .type = CODEC_TYPE_ZR36050, |
| .setup = zr36050_setup, // functionality |
| .unset = zr36050_unset, |
| .set_mode = zr36050_set_mode, |
| .set_video = zr36050_set_video, |
| .control = zr36050_control, |
| // others are not used |
| }; |
| |
| /* HOOK IN DRIVER AS KERNEL MODULE */ |
| |
| int zr36050_init_module(void) |
| { |
| zr36050_codecs = 0; |
| return videocodec_register(&zr36050_codec); |
| } |
| |
| void zr36050_cleanup_module(void) |
| { |
| if (zr36050_codecs) { |
| pr_debug("zr36050: something's wrong - %d codecs left somehow.\n", |
| zr36050_codecs); |
| } |
| videocodec_unregister(&zr36050_codec); |
| } |