| /* |
| * vpif - Video Port Interface driver |
| * VPIF is a receiver and transmitter for video data. It has two channels(0, 1) |
| * that receiving video byte stream and two channels(2, 3) for video output. |
| * The hardware supports SDTV, HDTV formats, raw data capture. |
| * Currently, the driver supports NTSC and PAL standards. |
| * |
| * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/ |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed .as is. WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/spinlock.h> |
| #include <linux/v4l2-dv-timings.h> |
| #include <linux/of_graph.h> |
| |
| #include "vpif.h" |
| |
| MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver"); |
| MODULE_LICENSE("GPL"); |
| |
| #define VPIF_DRIVER_NAME "vpif" |
| MODULE_ALIAS("platform:" VPIF_DRIVER_NAME); |
| |
| #define VPIF_CH0_MAX_MODES 22 |
| #define VPIF_CH1_MAX_MODES 2 |
| #define VPIF_CH2_MAX_MODES 15 |
| #define VPIF_CH3_MAX_MODES 2 |
| |
| struct vpif_data { |
| struct platform_device *capture; |
| struct platform_device *display; |
| }; |
| |
| DEFINE_SPINLOCK(vpif_lock); |
| EXPORT_SYMBOL_GPL(vpif_lock); |
| |
| void __iomem *vpif_base; |
| EXPORT_SYMBOL_GPL(vpif_base); |
| |
| /* |
| * vpif_ch_params: video standard configuration parameters for vpif |
| * |
| * The table must include all presets from supported subdevices. |
| */ |
| const struct vpif_channel_config_params vpif_ch_params[] = { |
| /* HDTV formats */ |
| { |
| .name = "480p59_94", |
| .width = 720, |
| .height = 480, |
| .frm_fmt = 1, |
| .ycmux_mode = 0, |
| .eav2sav = 138-8, |
| .sav2eav = 720, |
| .l1 = 1, |
| .l3 = 43, |
| .l5 = 523, |
| .vsize = 525, |
| .capture_format = 0, |
| .vbi_supported = 0, |
| .hd_sd = 1, |
| .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, |
| }, |
| { |
| .name = "576p50", |
| .width = 720, |
| .height = 576, |
| .frm_fmt = 1, |
| .ycmux_mode = 0, |
| .eav2sav = 144-8, |
| .sav2eav = 720, |
| .l1 = 1, |
| .l3 = 45, |
| .l5 = 621, |
| .vsize = 625, |
| .capture_format = 0, |
| .vbi_supported = 0, |
| .hd_sd = 1, |
| .dv_timings = V4L2_DV_BT_CEA_720X576P50, |
| }, |
| { |
| .name = "720p50", |
| .width = 1280, |
| .height = 720, |
| .frm_fmt = 1, |
| .ycmux_mode = 0, |
| .eav2sav = 700-8, |
| .sav2eav = 1280, |
| .l1 = 1, |
| .l3 = 26, |
| .l5 = 746, |
| .vsize = 750, |
| .capture_format = 0, |
| .vbi_supported = 0, |
| .hd_sd = 1, |
| .dv_timings = V4L2_DV_BT_CEA_1280X720P50, |
| }, |
| { |
| .name = "720p60", |
| .width = 1280, |
| .height = 720, |
| .frm_fmt = 1, |
| .ycmux_mode = 0, |
| .eav2sav = 370 - 8, |
| .sav2eav = 1280, |
| .l1 = 1, |
| .l3 = 26, |
| .l5 = 746, |
| .vsize = 750, |
| .capture_format = 0, |
| .vbi_supported = 0, |
| .hd_sd = 1, |
| .dv_timings = V4L2_DV_BT_CEA_1280X720P60, |
| }, |
| { |
| .name = "1080I50", |
| .width = 1920, |
| .height = 1080, |
| .frm_fmt = 0, |
| .ycmux_mode = 0, |
| .eav2sav = 720 - 8, |
| .sav2eav = 1920, |
| .l1 = 1, |
| .l3 = 21, |
| .l5 = 561, |
| .l7 = 563, |
| .l9 = 584, |
| .l11 = 1124, |
| .vsize = 1125, |
| .capture_format = 0, |
| .vbi_supported = 0, |
| .hd_sd = 1, |
| .dv_timings = V4L2_DV_BT_CEA_1920X1080I50, |
| }, |
| { |
| .name = "1080I60", |
| .width = 1920, |
| .height = 1080, |
| .frm_fmt = 0, |
| .ycmux_mode = 0, |
| .eav2sav = 280 - 8, |
| .sav2eav = 1920, |
| .l1 = 1, |
| .l3 = 21, |
| .l5 = 561, |
| .l7 = 563, |
| .l9 = 584, |
| .l11 = 1124, |
| .vsize = 1125, |
| .capture_format = 0, |
| .vbi_supported = 0, |
| .hd_sd = 1, |
| .dv_timings = V4L2_DV_BT_CEA_1920X1080I60, |
| }, |
| { |
| .name = "1080p60", |
| .width = 1920, |
| .height = 1080, |
| .frm_fmt = 1, |
| .ycmux_mode = 0, |
| .eav2sav = 280 - 8, |
| .sav2eav = 1920, |
| .l1 = 1, |
| .l3 = 42, |
| .l5 = 1122, |
| .vsize = 1125, |
| .capture_format = 0, |
| .vbi_supported = 0, |
| .hd_sd = 1, |
| .dv_timings = V4L2_DV_BT_CEA_1920X1080P60, |
| }, |
| |
| /* SDTV formats */ |
| { |
| .name = "NTSC_M", |
| .width = 720, |
| .height = 480, |
| .frm_fmt = 0, |
| .ycmux_mode = 1, |
| .eav2sav = 268, |
| .sav2eav = 1440, |
| .l1 = 1, |
| .l3 = 23, |
| .l5 = 263, |
| .l7 = 266, |
| .l9 = 286, |
| .l11 = 525, |
| .vsize = 525, |
| .capture_format = 0, |
| .vbi_supported = 1, |
| .hd_sd = 0, |
| .stdid = V4L2_STD_525_60, |
| }, |
| { |
| .name = "PAL_BDGHIK", |
| .width = 720, |
| .height = 576, |
| .frm_fmt = 0, |
| .ycmux_mode = 1, |
| .eav2sav = 280, |
| .sav2eav = 1440, |
| .l1 = 1, |
| .l3 = 23, |
| .l5 = 311, |
| .l7 = 313, |
| .l9 = 336, |
| .l11 = 624, |
| .vsize = 625, |
| .capture_format = 0, |
| .vbi_supported = 1, |
| .hd_sd = 0, |
| .stdid = V4L2_STD_625_50, |
| }, |
| }; |
| EXPORT_SYMBOL_GPL(vpif_ch_params); |
| |
| const unsigned int vpif_ch_params_count = ARRAY_SIZE(vpif_ch_params); |
| EXPORT_SYMBOL_GPL(vpif_ch_params_count); |
| |
| static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val) |
| { |
| if (val) |
| vpif_set_bit(reg, bit); |
| else |
| vpif_clr_bit(reg, bit); |
| } |
| |
| /* This structure is used to keep track of VPIF size register's offsets */ |
| struct vpif_registers { |
| u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl; |
| u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt; |
| u32 vanc1_size, width_mask, len_mask; |
| u8 max_modes; |
| }; |
| |
| static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = { |
| /* Channel0 */ |
| { |
| VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01, |
| VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL, |
| VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, |
| VPIF_CH0_MAX_MODES, |
| }, |
| /* Channel1 */ |
| { |
| VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01, |
| VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL, |
| VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, |
| VPIF_CH1_MAX_MODES, |
| }, |
| /* Channel2 */ |
| { |
| VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01, |
| VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL, |
| VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE, |
| VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF, |
| VPIF_CH2_MAX_MODES |
| }, |
| /* Channel3 */ |
| { |
| VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01, |
| VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL, |
| VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE, |
| VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF, |
| VPIF_CH3_MAX_MODES |
| }, |
| }; |
| |
| /* vpif_set_mode_info: |
| * This function is used to set horizontal and vertical config parameters |
| * As per the standard in the channel, configure the values of L1, L3, |
| * L5, L7 L9, L11 in VPIF Register , also write width and height |
| */ |
| static void vpif_set_mode_info(const struct vpif_channel_config_params *config, |
| u8 channel_id, u8 config_channel_id) |
| { |
| u32 value; |
| |
| value = (config->eav2sav & vpifregs[config_channel_id].width_mask); |
| value <<= VPIF_CH_LEN_SHIFT; |
| value |= (config->sav2eav & vpifregs[config_channel_id].width_mask); |
| regw(value, vpifregs[channel_id].h_cfg); |
| |
| value = (config->l1 & vpifregs[config_channel_id].len_mask); |
| value <<= VPIF_CH_LEN_SHIFT; |
| value |= (config->l3 & vpifregs[config_channel_id].len_mask); |
| regw(value, vpifregs[channel_id].v_cfg_00); |
| |
| value = (config->l5 & vpifregs[config_channel_id].len_mask); |
| value <<= VPIF_CH_LEN_SHIFT; |
| value |= (config->l7 & vpifregs[config_channel_id].len_mask); |
| regw(value, vpifregs[channel_id].v_cfg_01); |
| |
| value = (config->l9 & vpifregs[config_channel_id].len_mask); |
| value <<= VPIF_CH_LEN_SHIFT; |
| value |= (config->l11 & vpifregs[config_channel_id].len_mask); |
| regw(value, vpifregs[channel_id].v_cfg_02); |
| |
| value = (config->vsize & vpifregs[config_channel_id].len_mask); |
| regw(value, vpifregs[channel_id].v_cfg); |
| } |
| |
| /* config_vpif_params |
| * Function to set the parameters of a channel |
| * Mainly modifies the channel ciontrol register |
| * It sets frame format, yc mux mode |
| */ |
| static void config_vpif_params(struct vpif_params *vpifparams, |
| u8 channel_id, u8 found) |
| { |
| const struct vpif_channel_config_params *config = &vpifparams->std_info; |
| u32 value, ch_nip, reg; |
| u8 start, end; |
| int i; |
| |
| start = channel_id; |
| end = channel_id + found; |
| |
| for (i = start; i < end; i++) { |
| reg = vpifregs[i].ch_ctrl; |
| if (channel_id < 2) |
| ch_nip = VPIF_CAPTURE_CH_NIP; |
| else |
| ch_nip = VPIF_DISPLAY_CH_NIP; |
| |
| vpif_wr_bit(reg, ch_nip, config->frm_fmt); |
| vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode); |
| vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT, |
| vpifparams->video_params.storage_mode); |
| |
| /* Set raster scanning SDR Format */ |
| vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT); |
| vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format); |
| |
| if (channel_id > 1) /* Set the Pixel enable bit */ |
| vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT); |
| else if (config->capture_format) { |
| /* Set the polarity of various pins */ |
| vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT, |
| vpifparams->iface.fid_pol); |
| vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT, |
| vpifparams->iface.vd_pol); |
| vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT, |
| vpifparams->iface.hd_pol); |
| |
| value = regr(reg); |
| /* Set data width */ |
| value &= ~(0x3u << |
| VPIF_CH_DATA_WIDTH_BIT); |
| value |= ((vpifparams->params.data_sz) << |
| VPIF_CH_DATA_WIDTH_BIT); |
| regw(value, reg); |
| } |
| |
| /* Write the pitch in the driver */ |
| regw((vpifparams->video_params.hpitch), |
| vpifregs[i].line_offset); |
| } |
| } |
| |
| /* vpif_set_video_params |
| * This function is used to set video parameters in VPIF register |
| */ |
| int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id) |
| { |
| const struct vpif_channel_config_params *config = &vpifparams->std_info; |
| int found = 1; |
| |
| vpif_set_mode_info(config, channel_id, channel_id); |
| if (!config->ycmux_mode) { |
| /* YC are on separate channels (HDTV formats) */ |
| vpif_set_mode_info(config, channel_id + 1, channel_id); |
| found = 2; |
| } |
| |
| config_vpif_params(vpifparams, channel_id, found); |
| |
| regw(0x80, VPIF_REQ_SIZE); |
| regw(0x01, VPIF_EMULATION_CTRL); |
| |
| return found; |
| } |
| EXPORT_SYMBOL(vpif_set_video_params); |
| |
| void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, |
| u8 channel_id) |
| { |
| u32 value; |
| |
| value = 0x3F8 & (vbiparams->hstart0); |
| value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16); |
| regw(value, vpifregs[channel_id].vanc0_strt); |
| |
| value = 0x3F8 & (vbiparams->hstart1); |
| value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16); |
| regw(value, vpifregs[channel_id].vanc1_strt); |
| |
| value = 0x3F8 & (vbiparams->hsize0); |
| value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16); |
| regw(value, vpifregs[channel_id].vanc0_size); |
| |
| value = 0x3F8 & (vbiparams->hsize1); |
| value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16); |
| regw(value, vpifregs[channel_id].vanc1_size); |
| |
| } |
| EXPORT_SYMBOL(vpif_set_vbi_display_params); |
| |
| int vpif_channel_getfid(u8 channel_id) |
| { |
| return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK) |
| >> VPIF_CH_FID_SHIFT; |
| } |
| EXPORT_SYMBOL(vpif_channel_getfid); |
| |
| static void vpif_pdev_release(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| |
| kfree(pdev); |
| } |
| |
| static int vpif_probe(struct platform_device *pdev) |
| { |
| static struct resource res_irq; |
| struct platform_device *pdev_capture, *pdev_display; |
| struct device_node *endpoint = NULL; |
| struct vpif_data *data; |
| int ret; |
| int irq; |
| |
| vpif_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(vpif_base)) |
| return PTR_ERR(vpif_base); |
| |
| data = kzalloc(sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, data); |
| |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_get(&pdev->dev); |
| |
| /* |
| * If VPIF Node has endpoints, assume "new" DT support, |
| * where capture and display drivers don't have DT nodes |
| * so their devices need to be registered manually here |
| * for their legacy platform_drivers to work. |
| */ |
| endpoint = of_graph_get_endpoint_by_regs(pdev->dev.of_node, 0, -1); |
| if (!endpoint) |
| return 0; |
| of_node_put(endpoint); |
| |
| /* |
| * For DT platforms, manually create platform_devices for |
| * capture/display drivers. |
| */ |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| ret = irq; |
| goto err_put_rpm; |
| } |
| res_irq = DEFINE_RES_IRQ_NAMED(irq, of_node_full_name(pdev->dev.of_node)); |
| res_irq.flags |= irq_get_trigger_type(irq); |
| |
| pdev_capture = kzalloc(sizeof(*pdev_capture), GFP_KERNEL); |
| if (!pdev_capture) { |
| ret = -ENOMEM; |
| goto err_put_rpm; |
| } |
| |
| pdev_capture->name = "vpif_capture"; |
| pdev_capture->id = -1; |
| pdev_capture->resource = &res_irq; |
| pdev_capture->num_resources = 1; |
| pdev_capture->dev.dma_mask = pdev->dev.dma_mask; |
| pdev_capture->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; |
| pdev_capture->dev.parent = &pdev->dev; |
| pdev_capture->dev.release = vpif_pdev_release; |
| |
| ret = platform_device_register(pdev_capture); |
| if (ret) |
| goto err_put_pdev_capture; |
| |
| pdev_display = kzalloc(sizeof(*pdev_display), GFP_KERNEL); |
| if (!pdev_display) { |
| ret = -ENOMEM; |
| goto err_put_pdev_capture; |
| } |
| |
| pdev_display->name = "vpif_display"; |
| pdev_display->id = -1; |
| pdev_display->resource = &res_irq; |
| pdev_display->num_resources = 1; |
| pdev_display->dev.dma_mask = pdev->dev.dma_mask; |
| pdev_display->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; |
| pdev_display->dev.parent = &pdev->dev; |
| pdev_display->dev.release = vpif_pdev_release; |
| |
| ret = platform_device_register(pdev_display); |
| if (ret) |
| goto err_put_pdev_display; |
| |
| data->capture = pdev_capture; |
| data->display = pdev_display; |
| |
| return 0; |
| |
| err_put_pdev_display: |
| platform_device_put(pdev_display); |
| err_put_pdev_capture: |
| platform_device_put(pdev_capture); |
| err_put_rpm: |
| pm_runtime_put(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| kfree(data); |
| |
| return ret; |
| } |
| |
| static void vpif_remove(struct platform_device *pdev) |
| { |
| struct vpif_data *data = platform_get_drvdata(pdev); |
| |
| if (data->capture) |
| platform_device_unregister(data->capture); |
| if (data->display) |
| platform_device_unregister(data->display); |
| |
| pm_runtime_put(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| kfree(data); |
| } |
| |
| #ifdef CONFIG_PM |
| static int vpif_suspend(struct device *dev) |
| { |
| pm_runtime_put(dev); |
| return 0; |
| } |
| |
| static int vpif_resume(struct device *dev) |
| { |
| pm_runtime_get(dev); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops vpif_pm = { |
| .suspend = vpif_suspend, |
| .resume = vpif_resume, |
| }; |
| |
| #define vpif_pm_ops (&vpif_pm) |
| #else |
| #define vpif_pm_ops NULL |
| #endif |
| |
| #if IS_ENABLED(CONFIG_OF) |
| static const struct of_device_id vpif_of_match[] = { |
| { .compatible = "ti,da850-vpif", }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, vpif_of_match); |
| #endif |
| |
| static struct platform_driver vpif_driver = { |
| .driver = { |
| .of_match_table = of_match_ptr(vpif_of_match), |
| .name = VPIF_DRIVER_NAME, |
| .pm = vpif_pm_ops, |
| }, |
| .remove_new = vpif_remove, |
| .probe = vpif_probe, |
| }; |
| |
| static void vpif_exit(void) |
| { |
| platform_driver_unregister(&vpif_driver); |
| } |
| |
| static int __init vpif_init(void) |
| { |
| return platform_driver_register(&vpif_driver); |
| } |
| subsys_initcall(vpif_init); |
| module_exit(vpif_exit); |
| |