| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. |
| * |
| * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) |
| * |
| * Based on the dvb-usb-framework code and the |
| * original Terratec Cinergy T2 driver by: |
| * |
| * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and |
| * Holger Waechtler <holger@qanu.de> |
| * |
| * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf |
| */ |
| |
| #include "cinergyT2.h" |
| |
| |
| /* debug */ |
| int dvb_usb_cinergyt2_debug; |
| |
| module_param_named(debug, dvb_usb_cinergyt2_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 (or-able))."); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| struct cinergyt2_state { |
| u8 rc_counter; |
| unsigned char data[64]; |
| }; |
| |
| /* Forward declaration */ |
| static const struct dvb_usb_device_properties cinergyt2_properties; |
| |
| static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable) |
| { |
| struct dvb_usb_device *d = adap->dev; |
| struct cinergyt2_state *st = d->priv; |
| int ret; |
| |
| mutex_lock(&d->data_mutex); |
| st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER; |
| st->data[1] = enable ? 1 : 0; |
| |
| ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0); |
| mutex_unlock(&d->data_mutex); |
| |
| return ret; |
| } |
| |
| static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable) |
| { |
| struct cinergyt2_state *st = d->priv; |
| int ret; |
| |
| mutex_lock(&d->data_mutex); |
| st->data[0] = CINERGYT2_EP1_SLEEP_MODE; |
| st->data[1] = enable ? 0 : 1; |
| |
| ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0); |
| mutex_unlock(&d->data_mutex); |
| |
| return ret; |
| } |
| |
| static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dvb_usb_device *d = adap->dev; |
| struct cinergyt2_state *st = d->priv; |
| int ret; |
| |
| adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev); |
| |
| mutex_lock(&d->data_mutex); |
| st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION; |
| |
| ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0); |
| if (ret < 0) { |
| if (adap->fe_adap[0].fe) |
| adap->fe_adap[0].fe->ops.release(adap->fe_adap[0].fe); |
| deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep state info\n"); |
| } |
| mutex_unlock(&d->data_mutex); |
| |
| return ret; |
| } |
| |
| static struct rc_map_table rc_map_cinergyt2_table[] = { |
| { 0x0401, KEY_POWER }, |
| { 0x0402, KEY_1 }, |
| { 0x0403, KEY_2 }, |
| { 0x0404, KEY_3 }, |
| { 0x0405, KEY_4 }, |
| { 0x0406, KEY_5 }, |
| { 0x0407, KEY_6 }, |
| { 0x0408, KEY_7 }, |
| { 0x0409, KEY_8 }, |
| { 0x040a, KEY_9 }, |
| { 0x040c, KEY_0 }, |
| { 0x040b, KEY_VIDEO }, |
| { 0x040d, KEY_REFRESH }, |
| { 0x040e, KEY_SELECT }, |
| { 0x040f, KEY_EPG }, |
| { 0x0410, KEY_UP }, |
| { 0x0414, KEY_DOWN }, |
| { 0x0411, KEY_LEFT }, |
| { 0x0413, KEY_RIGHT }, |
| { 0x0412, KEY_OK }, |
| { 0x0415, KEY_TEXT }, |
| { 0x0416, KEY_INFO }, |
| { 0x0417, KEY_RED }, |
| { 0x0418, KEY_GREEN }, |
| { 0x0419, KEY_YELLOW }, |
| { 0x041a, KEY_BLUE }, |
| { 0x041c, KEY_VOLUMEUP }, |
| { 0x041e, KEY_VOLUMEDOWN }, |
| { 0x041d, KEY_MUTE }, |
| { 0x041b, KEY_CHANNELUP }, |
| { 0x041f, KEY_CHANNELDOWN }, |
| { 0x0440, KEY_PAUSE }, |
| { 0x044c, KEY_PLAY }, |
| { 0x0458, KEY_RECORD }, |
| { 0x0454, KEY_PREVIOUS }, |
| { 0x0448, KEY_STOP }, |
| { 0x045c, KEY_NEXT } |
| }; |
| |
| /* Number of keypresses to ignore before detect repeating */ |
| #define RC_REPEAT_DELAY 3 |
| |
| static int repeatable_keys[] = { |
| KEY_UP, |
| KEY_DOWN, |
| KEY_LEFT, |
| KEY_RIGHT, |
| KEY_VOLUMEUP, |
| KEY_VOLUMEDOWN, |
| KEY_CHANNELUP, |
| KEY_CHANNELDOWN |
| }; |
| |
| static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) |
| { |
| struct cinergyt2_state *st = d->priv; |
| int i, ret; |
| |
| *state = REMOTE_NO_KEY_PRESSED; |
| |
| mutex_lock(&d->data_mutex); |
| st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS; |
| |
| ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); |
| if (ret < 0) |
| goto ret; |
| |
| if (st->data[4] == 0xff) { |
| /* key repeat */ |
| st->rc_counter++; |
| if (st->rc_counter > RC_REPEAT_DELAY) { |
| for (i = 0; i < ARRAY_SIZE(repeatable_keys); i++) { |
| if (d->last_event == repeatable_keys[i]) { |
| *state = REMOTE_KEY_REPEAT; |
| *event = d->last_event; |
| deb_rc("repeat key, event %x\n", |
| *event); |
| goto ret; |
| } |
| } |
| deb_rc("repeated key (non repeatable)\n"); |
| } |
| goto ret; |
| } |
| |
| /* hack to pass checksum on the custom field */ |
| st->data[2] = ~st->data[1]; |
| dvb_usb_nec_rc_key_to_event(d, st->data, event, state); |
| if (st->data[0] != 0) { |
| if (*event != d->last_event) |
| st->rc_counter = 0; |
| |
| deb_rc("key: %*ph\n", 5, st->data); |
| } |
| |
| ret: |
| mutex_unlock(&d->data_mutex); |
| return ret; |
| } |
| |
| static int cinergyt2_usb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| return dvb_usb_device_init(intf, &cinergyt2_properties, |
| THIS_MODULE, NULL, adapter_nr); |
| } |
| |
| enum { |
| TERRATEC_CINERGY_T2, |
| }; |
| |
| static struct usb_device_id cinergyt2_usb_table[] = { |
| DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_T2), |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, cinergyt2_usb_table); |
| |
| static const struct dvb_usb_device_properties cinergyt2_properties = { |
| .size_of_priv = sizeof(struct cinergyt2_state), |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .num_frontends = 1, |
| .fe = {{ |
| .streaming_ctrl = cinergyt2_streaming_ctrl, |
| .frontend_attach = cinergyt2_frontend_attach, |
| |
| /* parameter for the MPEG2-data transfer */ |
| .stream = { |
| .type = USB_BULK, |
| .count = 5, |
| .endpoint = 0x02, |
| .u = { |
| .bulk = { |
| .buffersize = 512, |
| } |
| } |
| }, |
| }}, |
| } |
| }, |
| |
| .power_ctrl = cinergyt2_power_ctrl, |
| |
| .rc.legacy = { |
| .rc_interval = 50, |
| .rc_map_table = rc_map_cinergyt2_table, |
| .rc_map_size = ARRAY_SIZE(rc_map_cinergyt2_table), |
| .rc_query = cinergyt2_rc_query, |
| }, |
| |
| .generic_bulk_ctrl_endpoint = 1, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { .name = "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver", |
| .cold_ids = {NULL}, |
| .warm_ids = { &cinergyt2_usb_table[TERRATEC_CINERGY_T2], NULL }, |
| }, |
| { NULL }, |
| } |
| }; |
| |
| |
| static struct usb_driver cinergyt2_driver = { |
| .name = "cinergyT2", |
| .probe = cinergyt2_usb_probe, |
| .disconnect = dvb_usb_device_exit, |
| .id_table = cinergyt2_usb_table |
| }; |
| |
| module_usb_driver(cinergyt2_driver); |
| |
| MODULE_DESCRIPTION("Terratec Cinergy T2 DVB-T driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Tomi Orava"); |