| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Real Time Clock interface for Linux on Atmel AT91RM9200 |
| * |
| * Copyright (C) 2002 Rick Bronson |
| * |
| * Converted to RTC class model by Andrew Victor |
| * |
| * Ported to Linux 2.6 by Steven Scholz |
| * Based on s3c2410-rtc.c Simtec Electronics |
| * |
| * Based on sa1100-rtc.c by Nils Faerber |
| * Based on rtc.c by Paul Gortmaker |
| */ |
| |
| #include <linux/bcd.h> |
| #include <linux/bitfield.h> |
| #include <linux/clk.h> |
| #include <linux/completion.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioctl.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/rtc.h> |
| #include <linux/spinlock.h> |
| #include <linux/suspend.h> |
| #include <linux/time.h> |
| #include <linux/uaccess.h> |
| |
| #define AT91_RTC_CR 0x00 /* Control Register */ |
| #define AT91_RTC_UPDTIM BIT(0) /* Update Request Time Register */ |
| #define AT91_RTC_UPDCAL BIT(1) /* Update Request Calendar Register */ |
| |
| #define AT91_RTC_MR 0x04 /* Mode Register */ |
| #define AT91_RTC_HRMOD BIT(0) /* 12/24 hour mode */ |
| #define AT91_RTC_NEGPPM BIT(4) /* Negative PPM correction */ |
| #define AT91_RTC_CORRECTION GENMASK(14, 8) /* Slow clock correction */ |
| #define AT91_RTC_HIGHPPM BIT(15) /* High PPM correction */ |
| |
| #define AT91_RTC_TIMR 0x08 /* Time Register */ |
| #define AT91_RTC_SEC GENMASK(6, 0) /* Current Second */ |
| #define AT91_RTC_MIN GENMASK(14, 8) /* Current Minute */ |
| #define AT91_RTC_HOUR GENMASK(21, 16) /* Current Hour */ |
| #define AT91_RTC_AMPM BIT(22) /* Ante Meridiem Post Meridiem Indicator */ |
| |
| #define AT91_RTC_CALR 0x0c /* Calendar Register */ |
| #define AT91_RTC_CENT GENMASK(6, 0) /* Current Century */ |
| #define AT91_RTC_YEAR GENMASK(15, 8) /* Current Year */ |
| #define AT91_RTC_MONTH GENMASK(20, 16) /* Current Month */ |
| #define AT91_RTC_DAY GENMASK(23, 21) /* Current Day */ |
| #define AT91_RTC_DATE GENMASK(29, 24) /* Current Date */ |
| |
| #define AT91_RTC_TIMALR 0x10 /* Time Alarm Register */ |
| #define AT91_RTC_SECEN BIT(7) /* Second Alarm Enable */ |
| #define AT91_RTC_MINEN BIT(15) /* Minute Alarm Enable */ |
| #define AT91_RTC_HOUREN BIT(23) /* Hour Alarm Enable */ |
| |
| #define AT91_RTC_CALALR 0x14 /* Calendar Alarm Register */ |
| #define AT91_RTC_MTHEN BIT(23) /* Month Alarm Enable */ |
| #define AT91_RTC_DATEEN BIT(31) /* Date Alarm Enable */ |
| |
| #define AT91_RTC_SR 0x18 /* Status Register */ |
| #define AT91_RTC_ACKUPD BIT(0) /* Acknowledge for Update */ |
| #define AT91_RTC_ALARM BIT(1) /* Alarm Flag */ |
| #define AT91_RTC_SECEV BIT(2) /* Second Event */ |
| #define AT91_RTC_TIMEV BIT(3) /* Time Event */ |
| #define AT91_RTC_CALEV BIT(4) /* Calendar Event */ |
| |
| #define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */ |
| #define AT91_RTC_IER 0x20 /* Interrupt Enable Register */ |
| #define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */ |
| #define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */ |
| |
| #define AT91_RTC_VER 0x2c /* Valid Entry Register */ |
| #define AT91_RTC_NVTIM BIT(0) /* Non valid Time */ |
| #define AT91_RTC_NVCAL BIT(1) /* Non valid Calendar */ |
| #define AT91_RTC_NVTIMALR BIT(2) /* Non valid Time Alarm */ |
| #define AT91_RTC_NVCALALR BIT(3) /* Non valid Calendar Alarm */ |
| |
| #define AT91_RTC_CORR_DIVIDEND 3906000 |
| #define AT91_RTC_CORR_LOW_RATIO 20 |
| |
| #define at91_rtc_read(field) \ |
| readl_relaxed(at91_rtc_regs + field) |
| #define at91_rtc_write(field, val) \ |
| writel_relaxed((val), at91_rtc_regs + field) |
| |
| struct at91_rtc_config { |
| bool use_shadow_imr; |
| bool has_correction; |
| }; |
| |
| static const struct at91_rtc_config *at91_rtc_config; |
| static DECLARE_COMPLETION(at91_rtc_updated); |
| static DECLARE_COMPLETION(at91_rtc_upd_rdy); |
| static void __iomem *at91_rtc_regs; |
| static int irq; |
| static DEFINE_SPINLOCK(at91_rtc_lock); |
| static u32 at91_rtc_shadow_imr; |
| static bool suspended; |
| static DEFINE_SPINLOCK(suspended_lock); |
| static unsigned long cached_events; |
| static u32 at91_rtc_imr; |
| static struct clk *sclk; |
| |
| static void at91_rtc_write_ier(u32 mask) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&at91_rtc_lock, flags); |
| at91_rtc_shadow_imr |= mask; |
| at91_rtc_write(AT91_RTC_IER, mask); |
| spin_unlock_irqrestore(&at91_rtc_lock, flags); |
| } |
| |
| static void at91_rtc_write_idr(u32 mask) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&at91_rtc_lock, flags); |
| at91_rtc_write(AT91_RTC_IDR, mask); |
| /* |
| * Register read back (of any RTC-register) needed to make sure |
| * IDR-register write has reached the peripheral before updating |
| * shadow mask. |
| * |
| * Note that there is still a possibility that the mask is updated |
| * before interrupts have actually been disabled in hardware. The only |
| * way to be certain would be to poll the IMR-register, which is |
| * the very register we are trying to emulate. The register read back |
| * is a reasonable heuristic. |
| */ |
| at91_rtc_read(AT91_RTC_SR); |
| at91_rtc_shadow_imr &= ~mask; |
| spin_unlock_irqrestore(&at91_rtc_lock, flags); |
| } |
| |
| static u32 at91_rtc_read_imr(void) |
| { |
| unsigned long flags; |
| u32 mask; |
| |
| if (at91_rtc_config->use_shadow_imr) { |
| spin_lock_irqsave(&at91_rtc_lock, flags); |
| mask = at91_rtc_shadow_imr; |
| spin_unlock_irqrestore(&at91_rtc_lock, flags); |
| } else { |
| mask = at91_rtc_read(AT91_RTC_IMR); |
| } |
| |
| return mask; |
| } |
| |
| /* |
| * Decode time/date into rtc_time structure |
| */ |
| static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg, |
| struct rtc_time *tm) |
| { |
| unsigned int time, date; |
| |
| /* must read twice in case it changes */ |
| do { |
| time = at91_rtc_read(timereg); |
| date = at91_rtc_read(calreg); |
| } while ((time != at91_rtc_read(timereg)) || |
| (date != at91_rtc_read(calreg))); |
| |
| tm->tm_sec = bcd2bin(FIELD_GET(AT91_RTC_SEC, time)); |
| tm->tm_min = bcd2bin(FIELD_GET(AT91_RTC_MIN, time)); |
| tm->tm_hour = bcd2bin(FIELD_GET(AT91_RTC_HOUR, time)); |
| |
| /* |
| * The Calendar Alarm register does not have a field for |
| * the year - so these will return an invalid value. |
| */ |
| tm->tm_year = bcd2bin(date & AT91_RTC_CENT) * 100; /* century */ |
| tm->tm_year += bcd2bin(FIELD_GET(AT91_RTC_YEAR, date)); /* year */ |
| |
| tm->tm_wday = bcd2bin(FIELD_GET(AT91_RTC_DAY, date)) - 1; /* day of the week [0-6], Sunday=0 */ |
| tm->tm_mon = bcd2bin(FIELD_GET(AT91_RTC_MONTH, date)) - 1; |
| tm->tm_mday = bcd2bin(FIELD_GET(AT91_RTC_DATE, date)); |
| } |
| |
| /* |
| * Read current time and date in RTC |
| */ |
| static int at91_rtc_readtime(struct device *dev, struct rtc_time *tm) |
| { |
| at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, tm); |
| tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year); |
| tm->tm_year = tm->tm_year - 1900; |
| |
| dev_dbg(dev, "%s(): %ptR\n", __func__, tm); |
| |
| return 0; |
| } |
| |
| /* |
| * Set current time and date in RTC |
| */ |
| static int at91_rtc_settime(struct device *dev, struct rtc_time *tm) |
| { |
| unsigned long cr; |
| |
| dev_dbg(dev, "%s(): %ptR\n", __func__, tm); |
| |
| wait_for_completion(&at91_rtc_upd_rdy); |
| |
| /* Stop Time/Calendar from counting */ |
| cr = at91_rtc_read(AT91_RTC_CR); |
| at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM); |
| |
| at91_rtc_write_ier(AT91_RTC_ACKUPD); |
| wait_for_completion(&at91_rtc_updated); /* wait for ACKUPD interrupt */ |
| at91_rtc_write_idr(AT91_RTC_ACKUPD); |
| |
| at91_rtc_write(AT91_RTC_TIMR, |
| FIELD_PREP(AT91_RTC_SEC, bin2bcd(tm->tm_sec)) |
| | FIELD_PREP(AT91_RTC_MIN, bin2bcd(tm->tm_min)) |
| | FIELD_PREP(AT91_RTC_HOUR, bin2bcd(tm->tm_hour))); |
| |
| at91_rtc_write(AT91_RTC_CALR, |
| FIELD_PREP(AT91_RTC_CENT, |
| bin2bcd((tm->tm_year + 1900) / 100)) |
| | FIELD_PREP(AT91_RTC_YEAR, bin2bcd(tm->tm_year % 100)) |
| | FIELD_PREP(AT91_RTC_MONTH, bin2bcd(tm->tm_mon + 1)) |
| | FIELD_PREP(AT91_RTC_DAY, bin2bcd(tm->tm_wday + 1)) |
| | FIELD_PREP(AT91_RTC_DATE, bin2bcd(tm->tm_mday))); |
| |
| /* Restart Time/Calendar */ |
| cr = at91_rtc_read(AT91_RTC_CR); |
| at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_SECEV); |
| at91_rtc_write(AT91_RTC_CR, cr & ~(AT91_RTC_UPDCAL | AT91_RTC_UPDTIM)); |
| at91_rtc_write_ier(AT91_RTC_SECEV); |
| |
| return 0; |
| } |
| |
| /* |
| * Read alarm time and date in RTC |
| */ |
| static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct rtc_time *tm = &alrm->time; |
| |
| at91_rtc_decodetime(AT91_RTC_TIMALR, AT91_RTC_CALALR, tm); |
| tm->tm_year = -1; |
| |
| alrm->enabled = (at91_rtc_read_imr() & AT91_RTC_ALARM) |
| ? 1 : 0; |
| |
| dev_dbg(dev, "%s(): %ptR %sabled\n", __func__, tm, |
| alrm->enabled ? "en" : "dis"); |
| |
| return 0; |
| } |
| |
| /* |
| * Set alarm time and date in RTC |
| */ |
| static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct rtc_time tm = alrm->time; |
| |
| at91_rtc_write_idr(AT91_RTC_ALARM); |
| at91_rtc_write(AT91_RTC_TIMALR, |
| FIELD_PREP(AT91_RTC_SEC, bin2bcd(alrm->time.tm_sec)) |
| | FIELD_PREP(AT91_RTC_MIN, bin2bcd(alrm->time.tm_min)) |
| | FIELD_PREP(AT91_RTC_HOUR, bin2bcd(alrm->time.tm_hour)) |
| | AT91_RTC_HOUREN | AT91_RTC_MINEN | AT91_RTC_SECEN); |
| at91_rtc_write(AT91_RTC_CALALR, |
| FIELD_PREP(AT91_RTC_MONTH, bin2bcd(alrm->time.tm_mon + 1)) |
| | FIELD_PREP(AT91_RTC_DATE, bin2bcd(alrm->time.tm_mday)) |
| | AT91_RTC_DATEEN | AT91_RTC_MTHEN); |
| |
| if (alrm->enabled) { |
| at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); |
| at91_rtc_write_ier(AT91_RTC_ALARM); |
| } |
| |
| dev_dbg(dev, "%s(): %ptR\n", __func__, &tm); |
| |
| return 0; |
| } |
| |
| static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) |
| { |
| dev_dbg(dev, "%s(): cmd=%08x\n", __func__, enabled); |
| |
| if (enabled) { |
| at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); |
| at91_rtc_write_ier(AT91_RTC_ALARM); |
| } else |
| at91_rtc_write_idr(AT91_RTC_ALARM); |
| |
| return 0; |
| } |
| |
| static int at91_rtc_readoffset(struct device *dev, long *offset) |
| { |
| u32 mr = at91_rtc_read(AT91_RTC_MR); |
| long val = FIELD_GET(AT91_RTC_CORRECTION, mr); |
| |
| if (!val) { |
| *offset = 0; |
| return 0; |
| } |
| |
| val++; |
| |
| if (!(mr & AT91_RTC_NEGPPM)) |
| val = -val; |
| |
| if (!(mr & AT91_RTC_HIGHPPM)) |
| val *= AT91_RTC_CORR_LOW_RATIO; |
| |
| *offset = DIV_ROUND_CLOSEST(AT91_RTC_CORR_DIVIDEND, val); |
| |
| return 0; |
| } |
| |
| static int at91_rtc_setoffset(struct device *dev, long offset) |
| { |
| long corr; |
| u32 mr; |
| |
| if (offset > AT91_RTC_CORR_DIVIDEND / 2) |
| return -ERANGE; |
| if (offset < -AT91_RTC_CORR_DIVIDEND / 2) |
| return -ERANGE; |
| |
| mr = at91_rtc_read(AT91_RTC_MR); |
| mr &= ~(AT91_RTC_NEGPPM | AT91_RTC_CORRECTION | AT91_RTC_HIGHPPM); |
| |
| if (offset > 0) |
| mr |= AT91_RTC_NEGPPM; |
| else |
| offset = -offset; |
| |
| /* offset less than 764 ppb, disable correction*/ |
| if (offset < 764) { |
| at91_rtc_write(AT91_RTC_MR, mr & ~AT91_RTC_NEGPPM); |
| |
| return 0; |
| } |
| |
| /* |
| * 29208 ppb is the perfect cutoff between low range and high range |
| * low range values are never better than high range value after that. |
| */ |
| if (offset < 29208) { |
| corr = DIV_ROUND_CLOSEST(AT91_RTC_CORR_DIVIDEND, offset * AT91_RTC_CORR_LOW_RATIO); |
| } else { |
| corr = DIV_ROUND_CLOSEST(AT91_RTC_CORR_DIVIDEND, offset); |
| mr |= AT91_RTC_HIGHPPM; |
| } |
| |
| if (corr > 128) |
| corr = 128; |
| |
| mr |= FIELD_PREP(AT91_RTC_CORRECTION, corr - 1); |
| |
| at91_rtc_write(AT91_RTC_MR, mr); |
| |
| return 0; |
| } |
| |
| /* |
| * IRQ handler for the RTC |
| */ |
| static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id) |
| { |
| struct platform_device *pdev = dev_id; |
| struct rtc_device *rtc = platform_get_drvdata(pdev); |
| unsigned int rtsr; |
| unsigned long events = 0; |
| int ret = IRQ_NONE; |
| |
| spin_lock(&suspended_lock); |
| rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read_imr(); |
| if (rtsr) { /* this interrupt is shared! Is it ours? */ |
| if (rtsr & AT91_RTC_ALARM) |
| events |= (RTC_AF | RTC_IRQF); |
| if (rtsr & AT91_RTC_SECEV) { |
| complete(&at91_rtc_upd_rdy); |
| at91_rtc_write_idr(AT91_RTC_SECEV); |
| } |
| if (rtsr & AT91_RTC_ACKUPD) |
| complete(&at91_rtc_updated); |
| |
| at91_rtc_write(AT91_RTC_SCCR, rtsr); /* clear status reg */ |
| |
| if (!suspended) { |
| rtc_update_irq(rtc, 1, events); |
| |
| dev_dbg(&pdev->dev, "%s(): num=%ld, events=0x%02lx\n", |
| __func__, events >> 8, events & 0x000000FF); |
| } else { |
| cached_events |= events; |
| at91_rtc_write_idr(at91_rtc_imr); |
| pm_system_wakeup(); |
| } |
| |
| ret = IRQ_HANDLED; |
| } |
| spin_unlock(&suspended_lock); |
| |
| return ret; |
| } |
| |
| static const struct at91_rtc_config at91rm9200_config = { |
| }; |
| |
| static const struct at91_rtc_config at91sam9x5_config = { |
| .use_shadow_imr = true, |
| }; |
| |
| static const struct at91_rtc_config sama5d4_config = { |
| .has_correction = true, |
| }; |
| |
| static const struct of_device_id at91_rtc_dt_ids[] = { |
| { |
| .compatible = "atmel,at91rm9200-rtc", |
| .data = &at91rm9200_config, |
| }, { |
| .compatible = "atmel,at91sam9x5-rtc", |
| .data = &at91sam9x5_config, |
| }, { |
| .compatible = "atmel,sama5d4-rtc", |
| .data = &sama5d4_config, |
| }, { |
| .compatible = "atmel,sama5d2-rtc", |
| .data = &sama5d4_config, |
| }, { |
| .compatible = "microchip,sam9x60-rtc", |
| .data = &sama5d4_config, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids); |
| |
| static const struct rtc_class_ops at91_rtc_ops = { |
| .read_time = at91_rtc_readtime, |
| .set_time = at91_rtc_settime, |
| .read_alarm = at91_rtc_readalarm, |
| .set_alarm = at91_rtc_setalarm, |
| .alarm_irq_enable = at91_rtc_alarm_irq_enable, |
| }; |
| |
| static const struct rtc_class_ops sama5d4_rtc_ops = { |
| .read_time = at91_rtc_readtime, |
| .set_time = at91_rtc_settime, |
| .read_alarm = at91_rtc_readalarm, |
| .set_alarm = at91_rtc_setalarm, |
| .alarm_irq_enable = at91_rtc_alarm_irq_enable, |
| .set_offset = at91_rtc_setoffset, |
| .read_offset = at91_rtc_readoffset, |
| }; |
| |
| /* |
| * Initialize and install RTC driver |
| */ |
| static int __init at91_rtc_probe(struct platform_device *pdev) |
| { |
| struct rtc_device *rtc; |
| struct resource *regs; |
| int ret = 0; |
| |
| at91_rtc_config = of_device_get_match_data(&pdev->dev); |
| if (!at91_rtc_config) |
| return -ENODEV; |
| |
| regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!regs) { |
| dev_err(&pdev->dev, "no mmio resource defined\n"); |
| return -ENXIO; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return -ENXIO; |
| |
| at91_rtc_regs = devm_ioremap(&pdev->dev, regs->start, |
| resource_size(regs)); |
| if (!at91_rtc_regs) { |
| dev_err(&pdev->dev, "failed to map registers, aborting.\n"); |
| return -ENOMEM; |
| } |
| |
| rtc = devm_rtc_allocate_device(&pdev->dev); |
| if (IS_ERR(rtc)) |
| return PTR_ERR(rtc); |
| platform_set_drvdata(pdev, rtc); |
| |
| sclk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(sclk)) |
| return PTR_ERR(sclk); |
| |
| ret = clk_prepare_enable(sclk); |
| if (ret) { |
| dev_err(&pdev->dev, "Could not enable slow clock\n"); |
| return ret; |
| } |
| |
| at91_rtc_write(AT91_RTC_CR, 0); |
| at91_rtc_write(AT91_RTC_MR, at91_rtc_read(AT91_RTC_MR) & ~AT91_RTC_HRMOD); |
| |
| /* Disable all interrupts */ |
| at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM | |
| AT91_RTC_SECEV | AT91_RTC_TIMEV | |
| AT91_RTC_CALEV); |
| |
| ret = devm_request_irq(&pdev->dev, irq, at91_rtc_interrupt, |
| IRQF_SHARED | IRQF_COND_SUSPEND, |
| "at91_rtc", pdev); |
| if (ret) { |
| dev_err(&pdev->dev, "IRQ %d already in use.\n", irq); |
| goto err_clk; |
| } |
| |
| /* cpu init code should really have flagged this device as |
| * being wake-capable; if it didn't, do that here. |
| */ |
| if (!device_can_wakeup(&pdev->dev)) |
| device_init_wakeup(&pdev->dev, 1); |
| |
| if (at91_rtc_config->has_correction) |
| rtc->ops = &sama5d4_rtc_ops; |
| else |
| rtc->ops = &at91_rtc_ops; |
| |
| rtc->range_min = RTC_TIMESTAMP_BEGIN_1900; |
| rtc->range_max = RTC_TIMESTAMP_END_2099; |
| ret = devm_rtc_register_device(rtc); |
| if (ret) |
| goto err_clk; |
| |
| /* enable SECEV interrupt in order to initialize at91_rtc_upd_rdy |
| * completion. |
| */ |
| at91_rtc_write_ier(AT91_RTC_SECEV); |
| |
| dev_info(&pdev->dev, "AT91 Real Time Clock driver.\n"); |
| return 0; |
| |
| err_clk: |
| clk_disable_unprepare(sclk); |
| |
| return ret; |
| } |
| |
| /* |
| * Disable and remove the RTC driver |
| */ |
| static void __exit at91_rtc_remove(struct platform_device *pdev) |
| { |
| /* Disable all interrupts */ |
| at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM | |
| AT91_RTC_SECEV | AT91_RTC_TIMEV | |
| AT91_RTC_CALEV); |
| |
| clk_disable_unprepare(sclk); |
| } |
| |
| static void at91_rtc_shutdown(struct platform_device *pdev) |
| { |
| /* Disable all interrupts */ |
| at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM | |
| AT91_RTC_SECEV | AT91_RTC_TIMEV | |
| AT91_RTC_CALEV); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| |
| /* AT91RM9200 RTC Power management control */ |
| |
| static int at91_rtc_suspend(struct device *dev) |
| { |
| /* this IRQ is shared with DBGU and other hardware which isn't |
| * necessarily doing PM like we are... |
| */ |
| at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM); |
| |
| at91_rtc_imr = at91_rtc_read_imr() |
| & (AT91_RTC_ALARM|AT91_RTC_SECEV); |
| if (at91_rtc_imr) { |
| if (device_may_wakeup(dev)) { |
| unsigned long flags; |
| |
| enable_irq_wake(irq); |
| |
| spin_lock_irqsave(&suspended_lock, flags); |
| suspended = true; |
| spin_unlock_irqrestore(&suspended_lock, flags); |
| } else { |
| at91_rtc_write_idr(at91_rtc_imr); |
| } |
| } |
| return 0; |
| } |
| |
| static int at91_rtc_resume(struct device *dev) |
| { |
| struct rtc_device *rtc = dev_get_drvdata(dev); |
| |
| if (at91_rtc_imr) { |
| if (device_may_wakeup(dev)) { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&suspended_lock, flags); |
| |
| if (cached_events) { |
| rtc_update_irq(rtc, 1, cached_events); |
| cached_events = 0; |
| } |
| |
| suspended = false; |
| spin_unlock_irqrestore(&suspended_lock, flags); |
| |
| disable_irq_wake(irq); |
| } |
| at91_rtc_write_ier(at91_rtc_imr); |
| } |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume); |
| |
| /* |
| * at91_rtc_remove() lives in .exit.text. For drivers registered via |
| * module_platform_driver_probe() this is ok because they cannot get unbound at |
| * runtime. So mark the driver struct with __refdata to prevent modpost |
| * triggering a section mismatch warning. |
| */ |
| static struct platform_driver at91_rtc_driver __refdata = { |
| .remove_new = __exit_p(at91_rtc_remove), |
| .shutdown = at91_rtc_shutdown, |
| .driver = { |
| .name = "at91_rtc", |
| .pm = &at91_rtc_pm_ops, |
| .of_match_table = at91_rtc_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver_probe(at91_rtc_driver, at91_rtc_probe); |
| |
| MODULE_AUTHOR("Rick Bronson"); |
| MODULE_DESCRIPTION("RTC driver for Atmel AT91RM9200"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:at91_rtc"); |