| /* SPDX-License-Identifier: GPL-2.0 */ |
| #include <linux/bitops.h> |
| #include <linux/serial_core.h> |
| #include <linux/io.h> |
| |
| #define SCI_MAJOR 204 |
| #define SCI_MINOR_START 8 |
| |
| |
| /* |
| * SCI register subset common for all port types. |
| * Not all registers will exist on all parts. |
| */ |
| enum { |
| SCSMR, /* Serial Mode Register */ |
| SCBRR, /* Bit Rate Register */ |
| SCSCR, /* Serial Control Register */ |
| SCxSR, /* Serial Status Register */ |
| SCFCR, /* FIFO Control Register */ |
| SCFDR, /* FIFO Data Count Register */ |
| SCxTDR, /* Transmit (FIFO) Data Register */ |
| SCxRDR, /* Receive (FIFO) Data Register */ |
| SCLSR, /* Line Status Register */ |
| SCTFDR, /* Transmit FIFO Data Count Register */ |
| SCRFDR, /* Receive FIFO Data Count Register */ |
| SCSPTR, /* Serial Port Register */ |
| HSSRR, /* Sampling Rate Register */ |
| SCPCR, /* Serial Port Control Register */ |
| SCPDR, /* Serial Port Data Register */ |
| SCDL, /* BRG Frequency Division Register */ |
| SCCKS, /* BRG Clock Select Register */ |
| HSRTRGR, /* Rx FIFO Data Count Trigger Register */ |
| HSTTRGR, /* Tx FIFO Data Count Trigger Register */ |
| SEMR, /* Serial extended mode register */ |
| |
| SCIx_NR_REGS, |
| }; |
| |
| |
| /* SCSMR (Serial Mode Register) */ |
| #define SCSMR_C_A BIT(7) /* Communication Mode */ |
| #define SCSMR_CSYNC BIT(7) /* - Clocked synchronous mode */ |
| #define SCSMR_ASYNC 0 /* - Asynchronous mode */ |
| #define SCSMR_CHR BIT(6) /* 7-bit Character Length */ |
| #define SCSMR_PE BIT(5) /* Parity Enable */ |
| #define SCSMR_ODD BIT(4) /* Odd Parity */ |
| #define SCSMR_STOP BIT(3) /* Stop Bit Length */ |
| #define SCSMR_CKS 0x0003 /* Clock Select */ |
| |
| /* Serial Mode Register, SCIFA/SCIFB only bits */ |
| #define SCSMR_CKEDG BIT(12) /* Transmit/Receive Clock Edge Select */ |
| #define SCSMR_SRC_MASK 0x0700 /* Sampling Control */ |
| #define SCSMR_SRC_16 0x0000 /* Sampling rate 1/16 */ |
| #define SCSMR_SRC_5 0x0100 /* Sampling rate 1/5 */ |
| #define SCSMR_SRC_7 0x0200 /* Sampling rate 1/7 */ |
| #define SCSMR_SRC_11 0x0300 /* Sampling rate 1/11 */ |
| #define SCSMR_SRC_13 0x0400 /* Sampling rate 1/13 */ |
| #define SCSMR_SRC_17 0x0500 /* Sampling rate 1/17 */ |
| #define SCSMR_SRC_19 0x0600 /* Sampling rate 1/19 */ |
| #define SCSMR_SRC_27 0x0700 /* Sampling rate 1/27 */ |
| |
| /* Serial Control Register, SCI only bits */ |
| #define SCSCR_TEIE BIT(2) /* Transmit End Interrupt Enable */ |
| |
| /* Serial Control Register, SCIFA/SCIFB only bits */ |
| #define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */ |
| #define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */ |
| |
| /* Serial Control Register, HSCIF-only bits */ |
| #define HSSCR_TOT_SHIFT 14 |
| |
| /* SCxSR (Serial Status Register) on SCI */ |
| #define SCI_TDRE BIT(7) /* Transmit Data Register Empty */ |
| #define SCI_RDRF BIT(6) /* Receive Data Register Full */ |
| #define SCI_ORER BIT(5) /* Overrun Error */ |
| #define SCI_FER BIT(4) /* Framing Error */ |
| #define SCI_PER BIT(3) /* Parity Error */ |
| #define SCI_TEND BIT(2) /* Transmit End */ |
| #define SCI_RESERVED 0x03 /* All reserved bits */ |
| |
| #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) |
| |
| #define SCI_RDxF_CLEAR (u32)(~(SCI_RESERVED | SCI_RDRF)) |
| #define SCI_ERROR_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)) |
| #define SCI_TDxE_CLEAR (u32)(~(SCI_RESERVED | SCI_TEND | SCI_TDRE)) |
| #define SCI_BREAK_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER)) |
| |
| /* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */ |
| #define SCIF_ER BIT(7) /* Receive Error */ |
| #define SCIF_TEND BIT(6) /* Transmission End */ |
| #define SCIF_TDFE BIT(5) /* Transmit FIFO Data Empty */ |
| #define SCIF_BRK BIT(4) /* Break Detect */ |
| #define SCIF_FER BIT(3) /* Framing Error */ |
| #define SCIF_PER BIT(2) /* Parity Error */ |
| #define SCIF_RDF BIT(1) /* Receive FIFO Data Full */ |
| #define SCIF_DR BIT(0) /* Receive Data Ready */ |
| /* SCIF only (optional) */ |
| #define SCIF_PERC 0xf000 /* Number of Parity Errors */ |
| #define SCIF_FERC 0x0f00 /* Number of Framing Errors */ |
| /*SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 only */ |
| #define SCIFA_ORER BIT(9) /* Overrun Error */ |
| |
| #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER) |
| |
| #define SCIF_RDxF_CLEAR (u32)(~(SCIF_DR | SCIF_RDF)) |
| #define SCIF_ERROR_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_ER)) |
| #define SCIF_TDxE_CLEAR (u32)(~(SCIF_TDFE)) |
| #define SCIF_BREAK_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_BRK)) |
| |
| /* SCFCR (FIFO Control Register) */ |
| #define SCFCR_RTRG1 BIT(7) /* Receive FIFO Data Count Trigger */ |
| #define SCFCR_RTRG0 BIT(6) |
| #define SCFCR_TTRG1 BIT(5) /* Transmit FIFO Data Count Trigger */ |
| #define SCFCR_TTRG0 BIT(4) |
| #define SCFCR_MCE BIT(3) /* Modem Control Enable */ |
| #define SCFCR_TFRST BIT(2) /* Transmit FIFO Data Register Reset */ |
| #define SCFCR_RFRST BIT(1) /* Receive FIFO Data Register Reset */ |
| #define SCFCR_LOOP BIT(0) /* Loopback Test */ |
| |
| /* SCLSR (Line Status Register) on (H)SCIF */ |
| #define SCLSR_TO BIT(2) /* Timeout */ |
| #define SCLSR_ORER BIT(0) /* Overrun Error */ |
| |
| /* SCSPTR (Serial Port Register), optional */ |
| #define SCSPTR_RTSIO BIT(7) /* Serial Port RTS# Pin Input/Output */ |
| #define SCSPTR_RTSDT BIT(6) /* Serial Port RTS# Pin Data */ |
| #define SCSPTR_CTSIO BIT(5) /* Serial Port CTS# Pin Input/Output */ |
| #define SCSPTR_CTSDT BIT(4) /* Serial Port CTS# Pin Data */ |
| #define SCSPTR_SCKIO BIT(3) /* Serial Port Clock Pin Input/Output */ |
| #define SCSPTR_SCKDT BIT(2) /* Serial Port Clock Pin Data */ |
| #define SCSPTR_SPB2IO BIT(1) /* Serial Port Break Input/Output */ |
| #define SCSPTR_SPB2DT BIT(0) /* Serial Port Break Data */ |
| |
| /* HSSRR HSCIF */ |
| #define HSCIF_SRE BIT(15) /* Sampling Rate Register Enable */ |
| #define HSCIF_SRDE BIT(14) /* Sampling Point Register Enable */ |
| |
| #define HSCIF_SRHP_SHIFT 8 |
| #define HSCIF_SRHP_MASK 0x0f00 |
| |
| /* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */ |
| #define SCPCR_RTSC BIT(4) /* Serial Port RTS# Pin / Output Pin */ |
| #define SCPCR_CTSC BIT(3) /* Serial Port CTS# Pin / Input Pin */ |
| #define SCPCR_SCKC BIT(2) /* Serial Port SCK Pin / Output Pin */ |
| #define SCPCR_RXDC BIT(1) /* Serial Port RXD Pin / Input Pin */ |
| #define SCPCR_TXDC BIT(0) /* Serial Port TXD Pin / Output Pin */ |
| |
| /* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */ |
| #define SCPDR_RTSD BIT(4) /* Serial Port RTS# Output Pin Data */ |
| #define SCPDR_CTSD BIT(3) /* Serial Port CTS# Input Pin Data */ |
| #define SCPDR_SCKD BIT(2) /* Serial Port SCK Output Pin Data */ |
| #define SCPDR_RXDD BIT(1) /* Serial Port RXD Input Pin Data */ |
| #define SCPDR_TXDD BIT(0) /* Serial Port TXD Output Pin Data */ |
| |
| /* |
| * BRG Clock Select Register (Some SCIF and HSCIF) |
| * The Baud Rate Generator for external clock can provide a clock source for |
| * the sampling clock. It outputs either its frequency divided clock, or the |
| * (undivided) (H)SCK external clock. |
| */ |
| #define SCCKS_CKS BIT(15) /* Select (H)SCK (1) or divided SC_CLK (0) */ |
| #define SCCKS_XIN BIT(14) /* SC_CLK uses bus clock (1) or SCIF_CLK (0) */ |
| |
| #define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) |
| #define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_DR | SCIF_RDF) |
| #define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) |
| #define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) |
| #define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) |
| #define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) |
| |
| #define SCxSR_ERRORS(port) (to_sci_port(port)->params->error_mask) |
| |
| #define SCxSR_RDxF_CLEAR(port) \ |
| (((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR) |
| #define SCxSR_ERROR_CLEAR(port) \ |
| (to_sci_port(port)->params->error_clear) |
| #define SCxSR_TDxE_CLEAR(port) \ |
| (((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR) |
| #define SCxSR_BREAK_CLEAR(port) \ |
| (((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR) |
