| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * USB Serial Converter Bus specific functions |
| * |
| * Copyright (C) 2002 Greg Kroah-Hartman (greg@kroah.com) |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/tty.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| #include <linux/usb/serial.h> |
| |
| static int usb_serial_device_match(struct device *dev, |
| struct device_driver *drv) |
| { |
| const struct usb_serial_port *port = to_usb_serial_port(dev); |
| struct usb_serial_driver *driver = to_usb_serial_driver(drv); |
| |
| /* |
| * drivers are already assigned to ports in serial_probe so it's |
| * a simple check here. |
| */ |
| if (driver == port->serial->type) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int usb_serial_device_probe(struct device *dev) |
| { |
| struct usb_serial_port *port = to_usb_serial_port(dev); |
| struct usb_serial_driver *driver; |
| struct device *tty_dev; |
| int retval = 0; |
| int minor; |
| |
| /* make sure suspend/resume doesn't race against port_probe */ |
| retval = usb_autopm_get_interface(port->serial->interface); |
| if (retval) |
| return retval; |
| |
| driver = port->serial->type; |
| if (driver->port_probe) { |
| retval = driver->port_probe(port); |
| if (retval) |
| goto err_autopm_put; |
| } |
| |
| minor = port->minor; |
| tty_dev = tty_port_register_device(&port->port, usb_serial_tty_driver, |
| minor, dev); |
| if (IS_ERR(tty_dev)) { |
| retval = PTR_ERR(tty_dev); |
| goto err_port_remove; |
| } |
| |
| usb_autopm_put_interface(port->serial->interface); |
| |
| dev_info(&port->serial->dev->dev, |
| "%s converter now attached to ttyUSB%d\n", |
| driver->description, minor); |
| |
| return 0; |
| |
| err_port_remove: |
| if (driver->port_remove) |
| driver->port_remove(port); |
| err_autopm_put: |
| usb_autopm_put_interface(port->serial->interface); |
| |
| return retval; |
| } |
| |
| static void usb_serial_device_remove(struct device *dev) |
| { |
| struct usb_serial_port *port = to_usb_serial_port(dev); |
| struct usb_serial_driver *driver; |
| int minor; |
| int autopm_err; |
| |
| /* |
| * Make sure suspend/resume doesn't race against port_remove. |
| * |
| * Note that no further runtime PM callbacks will be made if |
| * autopm_get fails. |
| */ |
| autopm_err = usb_autopm_get_interface(port->serial->interface); |
| |
| minor = port->minor; |
| tty_unregister_device(usb_serial_tty_driver, minor); |
| |
| driver = port->serial->type; |
| if (driver->port_remove) |
| driver->port_remove(port); |
| |
| dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", |
| driver->description, minor); |
| |
| if (!autopm_err) |
| usb_autopm_put_interface(port->serial->interface); |
| } |
| |
| static ssize_t new_id_store(struct device_driver *driver, |
| const char *buf, size_t count) |
| { |
| struct usb_serial_driver *usb_drv = to_usb_serial_driver(driver); |
| ssize_t retval = usb_store_new_id(&usb_drv->dynids, usb_drv->id_table, |
| driver, buf, count); |
| |
| if (retval >= 0 && usb_drv->usb_driver != NULL) |
| retval = usb_store_new_id(&usb_drv->usb_driver->dynids, |
| usb_drv->usb_driver->id_table, |
| &usb_drv->usb_driver->driver, |
| buf, count); |
| return retval; |
| } |
| |
| static ssize_t new_id_show(struct device_driver *driver, char *buf) |
| { |
| struct usb_serial_driver *usb_drv = to_usb_serial_driver(driver); |
| |
| return usb_show_dynids(&usb_drv->dynids, buf); |
| } |
| static DRIVER_ATTR_RW(new_id); |
| |
| static struct attribute *usb_serial_drv_attrs[] = { |
| &driver_attr_new_id.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(usb_serial_drv); |
| |
| static void free_dynids(struct usb_serial_driver *drv) |
| { |
| struct usb_dynid *dynid, *n; |
| |
| spin_lock(&drv->dynids.lock); |
| list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) { |
| list_del(&dynid->node); |
| kfree(dynid); |
| } |
| spin_unlock(&drv->dynids.lock); |
| } |
| |
| const struct bus_type usb_serial_bus_type = { |
| .name = "usb-serial", |
| .match = usb_serial_device_match, |
| .probe = usb_serial_device_probe, |
| .remove = usb_serial_device_remove, |
| .drv_groups = usb_serial_drv_groups, |
| }; |
| |
| int usb_serial_bus_register(struct usb_serial_driver *driver) |
| { |
| int retval; |
| |
| driver->driver.bus = &usb_serial_bus_type; |
| spin_lock_init(&driver->dynids.lock); |
| INIT_LIST_HEAD(&driver->dynids.list); |
| |
| retval = driver_register(&driver->driver); |
| |
| return retval; |
| } |
| |
| void usb_serial_bus_deregister(struct usb_serial_driver *driver) |
| { |
| free_dynids(driver); |
| driver_unregister(&driver->driver); |
| } |
| |