| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2018-2023 Oracle. All Rights Reserved. |
| * Author: Darrick J. Wong <djwong@kernel.org> |
| */ |
| #include "xfs.h" |
| #include "xfs_fs.h" |
| #include "xfs_shared.h" |
| #include "xfs_format.h" |
| #include "xfs_trans_resv.h" |
| #include "xfs_mount.h" |
| #include "xfs_defer.h" |
| #include "xfs_btree.h" |
| #include "xfs_btree_staging.h" |
| #include "xfs_inode.h" |
| #include "xfs_bit.h" |
| #include "xfs_log_format.h" |
| #include "xfs_trans.h" |
| #include "xfs_sb.h" |
| #include "xfs_alloc.h" |
| #include "xfs_ialloc.h" |
| #include "xfs_rmap.h" |
| #include "xfs_rmap_btree.h" |
| #include "xfs_refcount.h" |
| #include "xfs_refcount_btree.h" |
| #include "xfs_error.h" |
| #include "xfs_ag.h" |
| #include "xfs_health.h" |
| #include "scrub/xfs_scrub.h" |
| #include "scrub/scrub.h" |
| #include "scrub/common.h" |
| #include "scrub/btree.h" |
| #include "scrub/trace.h" |
| #include "scrub/repair.h" |
| #include "scrub/bitmap.h" |
| #include "scrub/agb_bitmap.h" |
| #include "scrub/xfile.h" |
| #include "scrub/xfarray.h" |
| #include "scrub/newbt.h" |
| #include "scrub/reap.h" |
| #include "scrub/rcbag.h" |
| |
| /* |
| * Rebuilding the Reference Count Btree |
| * ==================================== |
| * |
| * This algorithm is "borrowed" from xfs_repair. Imagine the rmap |
| * entries as rectangles representing extents of physical blocks, and |
| * that the rectangles can be laid down to allow them to overlap each |
| * other; then we know that we must emit a refcnt btree entry wherever |
| * the amount of overlap changes, i.e. the emission stimulus is |
| * level-triggered: |
| * |
| * - --- |
| * -- ----- ---- --- ------ |
| * -- ---- ----------- ---- --------- |
| * -------------------------------- ----------- |
| * ^ ^ ^^ ^^ ^ ^^ ^^^ ^^^^ ^ ^^ ^ ^ ^ |
| * 2 1 23 21 3 43 234 2123 1 01 2 3 0 |
| * |
| * For our purposes, a rmap is a tuple (startblock, len, fileoff, owner). |
| * |
| * Note that in the actual refcnt btree we don't store the refcount < 2 |
| * cases because the bnobt tells us which blocks are free; single-use |
| * blocks aren't recorded in the bnobt or the refcntbt. If the rmapbt |
| * supports storing multiple entries covering a given block we could |
| * theoretically dispense with the refcntbt and simply count rmaps, but |
| * that's inefficient in the (hot) write path, so we'll take the cost of |
| * the extra tree to save time. Also there's no guarantee that rmap |
| * will be enabled. |
| * |
| * Given an array of rmaps sorted by physical block number, a starting |
| * physical block (sp), a bag to hold rmaps that cover sp, and the next |
| * physical block where the level changes (np), we can reconstruct the |
| * refcount btree as follows: |
| * |
| * While there are still unprocessed rmaps in the array, |
| * - Set sp to the physical block (pblk) of the next unprocessed rmap. |
| * - Add to the bag all rmaps in the array where startblock == sp. |
| * - Set np to the physical block where the bag size will change. This |
| * is the minimum of (the pblk of the next unprocessed rmap) and |
| * (startblock + len of each rmap in the bag). |
| * - Record the bag size as old_bag_size. |
| * |
| * - While the bag isn't empty, |
| * - Remove from the bag all rmaps where startblock + len == np. |
| * - Add to the bag all rmaps in the array where startblock == np. |
| * - If the bag size isn't old_bag_size, store the refcount entry |
| * (sp, np - sp, bag_size) in the refcnt btree. |
| * - If the bag is empty, break out of the inner loop. |
| * - Set old_bag_size to the bag size |
| * - Set sp = np. |
| * - Set np to the physical block where the bag size will change. |
| * This is the minimum of (the pblk of the next unprocessed rmap) |
| * and (startblock + len of each rmap in the bag). |
| * |
| * Like all the other repairers, we make a list of all the refcount |
| * records we need, then reinitialize the refcount btree root and |
| * insert all the records. |
| */ |
| |
| struct xrep_refc { |
| /* refcount extents */ |
| struct xfarray *refcount_records; |
| |
| /* new refcountbt information */ |
| struct xrep_newbt new_btree; |
| |
| /* old refcountbt blocks */ |
| struct xagb_bitmap old_refcountbt_blocks; |
| |
| struct xfs_scrub *sc; |
| |
| /* get_records()'s position in the refcount record array. */ |
| xfarray_idx_t array_cur; |
| |
| /* # of refcountbt blocks */ |
| xfs_extlen_t btblocks; |
| }; |
| |
| /* Set us up to repair refcount btrees. */ |
| int |
| xrep_setup_ag_refcountbt( |
| struct xfs_scrub *sc) |
| { |
| char *descr; |
| int error; |
| |
| descr = xchk_xfile_ag_descr(sc, "rmap record bag"); |
| error = xrep_setup_xfbtree(sc, descr); |
| kfree(descr); |
| return error; |
| } |
| |
| /* Check for any obvious conflicts with this shared/CoW staging extent. */ |
| STATIC int |
| xrep_refc_check_ext( |
| struct xfs_scrub *sc, |
| const struct xfs_refcount_irec *rec) |
| { |
| enum xbtree_recpacking outcome; |
| int error; |
| |
| if (xfs_refcount_check_irec(sc->sa.pag, rec) != NULL) |
| return -EFSCORRUPTED; |
| |
| /* Make sure this isn't free space. */ |
| error = xfs_alloc_has_records(sc->sa.bno_cur, rec->rc_startblock, |
| rec->rc_blockcount, &outcome); |
| if (error) |
| return error; |
| if (outcome != XBTREE_RECPACKING_EMPTY) |
| return -EFSCORRUPTED; |
| |
| /* Must not be an inode chunk. */ |
| error = xfs_ialloc_has_inodes_at_extent(sc->sa.ino_cur, |
| rec->rc_startblock, rec->rc_blockcount, &outcome); |
| if (error) |
| return error; |
| if (outcome != XBTREE_RECPACKING_EMPTY) |
| return -EFSCORRUPTED; |
| |
| return 0; |
| } |
| |
| /* Record a reference count extent. */ |
| STATIC int |
| xrep_refc_stash( |
| struct xrep_refc *rr, |
| enum xfs_refc_domain domain, |
| xfs_agblock_t agbno, |
| xfs_extlen_t len, |
| uint64_t refcount) |
| { |
| struct xfs_refcount_irec irec = { |
| .rc_startblock = agbno, |
| .rc_blockcount = len, |
| .rc_domain = domain, |
| }; |
| struct xfs_scrub *sc = rr->sc; |
| int error = 0; |
| |
| if (xchk_should_terminate(sc, &error)) |
| return error; |
| |
| irec.rc_refcount = min_t(uint64_t, MAXREFCOUNT, refcount); |
| |
| error = xrep_refc_check_ext(rr->sc, &irec); |
| if (error) |
| return error; |
| |
| trace_xrep_refc_found(sc->sa.pag, &irec); |
| |
| return xfarray_append(rr->refcount_records, &irec); |
| } |
| |
| /* Record a CoW staging extent. */ |
| STATIC int |
| xrep_refc_stash_cow( |
| struct xrep_refc *rr, |
| xfs_agblock_t agbno, |
| xfs_extlen_t len) |
| { |
| return xrep_refc_stash(rr, XFS_REFC_DOMAIN_COW, agbno, len, 1); |
| } |
| |
| /* Decide if an rmap could describe a shared extent. */ |
| static inline bool |
| xrep_refc_rmap_shareable( |
| struct xfs_mount *mp, |
| const struct xfs_rmap_irec *rmap) |
| { |
| /* AG metadata are never sharable */ |
| if (XFS_RMAP_NON_INODE_OWNER(rmap->rm_owner)) |
| return false; |
| |
| /* Metadata in files are never shareable */ |
| if (xfs_internal_inum(mp, rmap->rm_owner)) |
| return false; |
| |
| /* Metadata and unwritten file blocks are not shareable. */ |
| if (rmap->rm_flags & (XFS_RMAP_ATTR_FORK | XFS_RMAP_BMBT_BLOCK | |
| XFS_RMAP_UNWRITTEN)) |
| return false; |
| |
| return true; |
| } |
| |
| /* |
| * Walk along the reverse mapping records until we find one that could describe |
| * a shared extent. |
| */ |
| STATIC int |
| xrep_refc_walk_rmaps( |
| struct xrep_refc *rr, |
| struct xfs_rmap_irec *rmap, |
| bool *have_rec) |
| { |
| struct xfs_btree_cur *cur = rr->sc->sa.rmap_cur; |
| struct xfs_mount *mp = cur->bc_mp; |
| int have_gt; |
| int error = 0; |
| |
| *have_rec = false; |
| |
| /* |
| * Loop through the remaining rmaps. Remember CoW staging |
| * extents and the refcountbt blocks from the old tree for later |
| * disposal. We can only share written data fork extents, so |
| * keep looping until we find an rmap for one. |
| */ |
| do { |
| if (xchk_should_terminate(rr->sc, &error)) |
| return error; |
| |
| error = xfs_btree_increment(cur, 0, &have_gt); |
| if (error) |
| return error; |
| if (!have_gt) |
| return 0; |
| |
| error = xfs_rmap_get_rec(cur, rmap, &have_gt); |
| if (error) |
| return error; |
| if (XFS_IS_CORRUPT(mp, !have_gt)) { |
| xfs_btree_mark_sick(cur); |
| return -EFSCORRUPTED; |
| } |
| |
| if (rmap->rm_owner == XFS_RMAP_OWN_COW) { |
| error = xrep_refc_stash_cow(rr, rmap->rm_startblock, |
| rmap->rm_blockcount); |
| if (error) |
| return error; |
| } else if (rmap->rm_owner == XFS_RMAP_OWN_REFC) { |
| /* refcountbt block, dump it when we're done. */ |
| rr->btblocks += rmap->rm_blockcount; |
| error = xagb_bitmap_set(&rr->old_refcountbt_blocks, |
| rmap->rm_startblock, |
| rmap->rm_blockcount); |
| if (error) |
| return error; |
| } |
| } while (!xrep_refc_rmap_shareable(mp, rmap)); |
| |
| *have_rec = true; |
| return 0; |
| } |
| |
| static inline uint32_t |
| xrep_refc_encode_startblock( |
| const struct xfs_refcount_irec *irec) |
| { |
| uint32_t start; |
| |
| start = irec->rc_startblock & ~XFS_REFC_COWFLAG; |
| if (irec->rc_domain == XFS_REFC_DOMAIN_COW) |
| start |= XFS_REFC_COWFLAG; |
| |
| return start; |
| } |
| |
| /* Sort in the same order as the ondisk records. */ |
| static int |
| xrep_refc_extent_cmp( |
| const void *a, |
| const void *b) |
| { |
| const struct xfs_refcount_irec *ap = a; |
| const struct xfs_refcount_irec *bp = b; |
| uint32_t sa, sb; |
| |
| sa = xrep_refc_encode_startblock(ap); |
| sb = xrep_refc_encode_startblock(bp); |
| |
| if (sa > sb) |
| return 1; |
| if (sa < sb) |
| return -1; |
| return 0; |
| } |
| |
| /* |
| * Sort the refcount extents by startblock or else the btree records will be in |
| * the wrong order. Make sure the records do not overlap in physical space. |
| */ |
| STATIC int |
| xrep_refc_sort_records( |
| struct xrep_refc *rr) |
| { |
| struct xfs_refcount_irec irec; |
| xfarray_idx_t cur; |
| enum xfs_refc_domain dom = XFS_REFC_DOMAIN_SHARED; |
| xfs_agblock_t next_agbno = 0; |
| int error; |
| |
| error = xfarray_sort(rr->refcount_records, xrep_refc_extent_cmp, |
| XFARRAY_SORT_KILLABLE); |
| if (error) |
| return error; |
| |
| foreach_xfarray_idx(rr->refcount_records, cur) { |
| if (xchk_should_terminate(rr->sc, &error)) |
| return error; |
| |
| error = xfarray_load(rr->refcount_records, cur, &irec); |
| if (error) |
| return error; |
| |
| if (dom == XFS_REFC_DOMAIN_SHARED && |
| irec.rc_domain == XFS_REFC_DOMAIN_COW) { |
| dom = irec.rc_domain; |
| next_agbno = 0; |
| } |
| |
| if (dom != irec.rc_domain) |
| return -EFSCORRUPTED; |
| if (irec.rc_startblock < next_agbno) |
| return -EFSCORRUPTED; |
| |
| next_agbno = irec.rc_startblock + irec.rc_blockcount; |
| } |
| |
| return error; |
| } |
| |
| /* |
| * Walk forward through the rmap btree to collect all rmaps starting at |
| * @bno in @rmap_bag. These represent the file(s) that share ownership of |
| * the current block. Upon return, the rmap cursor points to the last record |
| * satisfying the startblock constraint. |
| */ |
| static int |
| xrep_refc_push_rmaps_at( |
| struct xrep_refc *rr, |
| struct rcbag *rcstack, |
| xfs_agblock_t bno, |
| struct xfs_rmap_irec *rmap, |
| bool *have) |
| { |
| struct xfs_scrub *sc = rr->sc; |
| int have_gt; |
| int error; |
| |
| while (*have && rmap->rm_startblock == bno) { |
| error = rcbag_add(rcstack, rr->sc->tp, rmap); |
| if (error) |
| return error; |
| |
| error = xrep_refc_walk_rmaps(rr, rmap, have); |
| if (error) |
| return error; |
| } |
| |
| error = xfs_btree_decrement(sc->sa.rmap_cur, 0, &have_gt); |
| if (error) |
| return error; |
| if (XFS_IS_CORRUPT(sc->mp, !have_gt)) { |
| xfs_btree_mark_sick(sc->sa.rmap_cur); |
| return -EFSCORRUPTED; |
| } |
| |
| return 0; |
| } |
| |
| /* Iterate all the rmap records to generate reference count data. */ |
| STATIC int |
| xrep_refc_find_refcounts( |
| struct xrep_refc *rr) |
| { |
| struct xfs_scrub *sc = rr->sc; |
| struct rcbag *rcstack; |
| uint64_t old_stack_height; |
| xfs_agblock_t sbno; |
| xfs_agblock_t cbno; |
| xfs_agblock_t nbno; |
| bool have; |
| int error; |
| |
| xrep_ag_btcur_init(sc, &sc->sa); |
| |
| /* |
| * Set up a bag to store all the rmap records that we're tracking to |
| * generate a reference count record. If the size of the bag exceeds |
| * MAXREFCOUNT, we clamp rc_refcount. |
| */ |
| error = rcbag_init(sc->mp, sc->xmbtp, &rcstack); |
| if (error) |
| goto out_cur; |
| |
| /* Start the rmapbt cursor to the left of all records. */ |
| error = xfs_btree_goto_left_edge(sc->sa.rmap_cur); |
| if (error) |
| goto out_bag; |
| |
| /* Process reverse mappings into refcount data. */ |
| while (xfs_btree_has_more_records(sc->sa.rmap_cur)) { |
| struct xfs_rmap_irec rmap; |
| |
| /* Push all rmaps with pblk == sbno onto the stack */ |
| error = xrep_refc_walk_rmaps(rr, &rmap, &have); |
| if (error) |
| goto out_bag; |
| if (!have) |
| break; |
| sbno = cbno = rmap.rm_startblock; |
| error = xrep_refc_push_rmaps_at(rr, rcstack, sbno, &rmap, |
| &have); |
| if (error) |
| goto out_bag; |
| |
| /* Set nbno to the bno of the next refcount change */ |
| error = rcbag_next_edge(rcstack, sc->tp, &rmap, have, &nbno); |
| if (error) |
| goto out_bag; |
| |
| ASSERT(nbno > sbno); |
| old_stack_height = rcbag_count(rcstack); |
| |
| /* While stack isn't empty... */ |
| while (rcbag_count(rcstack) > 0) { |
| /* Pop all rmaps that end at nbno */ |
| error = rcbag_remove_ending_at(rcstack, sc->tp, nbno); |
| if (error) |
| goto out_bag; |
| |
| /* Push array items that start at nbno */ |
| error = xrep_refc_walk_rmaps(rr, &rmap, &have); |
| if (error) |
| goto out_bag; |
| if (have) { |
| error = xrep_refc_push_rmaps_at(rr, rcstack, |
| nbno, &rmap, &have); |
| if (error) |
| goto out_bag; |
| } |
| |
| /* Emit refcount if necessary */ |
| ASSERT(nbno > cbno); |
| if (rcbag_count(rcstack) != old_stack_height) { |
| if (old_stack_height > 1) { |
| error = xrep_refc_stash(rr, |
| XFS_REFC_DOMAIN_SHARED, |
| cbno, nbno - cbno, |
| old_stack_height); |
| if (error) |
| goto out_bag; |
| } |
| cbno = nbno; |
| } |
| |
| /* Stack empty, go find the next rmap */ |
| if (rcbag_count(rcstack) == 0) |
| break; |
| old_stack_height = rcbag_count(rcstack); |
| sbno = nbno; |
| |
| /* Set nbno to the bno of the next refcount change */ |
| error = rcbag_next_edge(rcstack, sc->tp, &rmap, have, |
| &nbno); |
| if (error) |
| goto out_bag; |
| |
| ASSERT(nbno > sbno); |
| } |
| } |
| |
| ASSERT(rcbag_count(rcstack) == 0); |
| out_bag: |
| rcbag_free(&rcstack); |
| out_cur: |
| xchk_ag_btcur_free(&sc->sa); |
| return error; |
| } |
| |
| /* Retrieve refcountbt data for bulk load. */ |
| STATIC int |
| xrep_refc_get_records( |
| struct xfs_btree_cur *cur, |
| unsigned int idx, |
| struct xfs_btree_block *block, |
| unsigned int nr_wanted, |
| void *priv) |
| { |
| struct xfs_refcount_irec *irec = &cur->bc_rec.rc; |
| struct xrep_refc *rr = priv; |
| union xfs_btree_rec *block_rec; |
| unsigned int loaded; |
| int error; |
| |
| for (loaded = 0; loaded < nr_wanted; loaded++, idx++) { |
| error = xfarray_load(rr->refcount_records, rr->array_cur++, |
| irec); |
| if (error) |
| return error; |
| |
| block_rec = xfs_btree_rec_addr(cur, idx, block); |
| cur->bc_ops->init_rec_from_cur(cur, block_rec); |
| } |
| |
| return loaded; |
| } |
| |
| /* Feed one of the new btree blocks to the bulk loader. */ |
| STATIC int |
| xrep_refc_claim_block( |
| struct xfs_btree_cur *cur, |
| union xfs_btree_ptr *ptr, |
| void *priv) |
| { |
| struct xrep_refc *rr = priv; |
| |
| return xrep_newbt_claim_block(cur, &rr->new_btree, ptr); |
| } |
| |
| /* Update the AGF counters. */ |
| STATIC int |
| xrep_refc_reset_counters( |
| struct xrep_refc *rr) |
| { |
| struct xfs_scrub *sc = rr->sc; |
| struct xfs_perag *pag = sc->sa.pag; |
| |
| /* |
| * After we commit the new btree to disk, it is possible that the |
| * process to reap the old btree blocks will race with the AIL trying |
| * to checkpoint the old btree blocks into the filesystem. If the new |
| * tree is shorter than the old one, the refcountbt write verifier will |
| * fail and the AIL will shut down the filesystem. |
| * |
| * To avoid this, save the old incore btree height values as the alt |
| * height values before re-initializing the perag info from the updated |
| * AGF to capture all the new values. |
| */ |
| pag->pagf_repair_refcount_level = pag->pagf_refcount_level; |
| |
| /* Reinitialize with the values we just logged. */ |
| return xrep_reinit_pagf(sc); |
| } |
| |
| /* |
| * Use the collected refcount information to stage a new refcount btree. If |
| * this is successful we'll return with the new btree root information logged |
| * to the repair transaction but not yet committed. |
| */ |
| STATIC int |
| xrep_refc_build_new_tree( |
| struct xrep_refc *rr) |
| { |
| struct xfs_scrub *sc = rr->sc; |
| struct xfs_btree_cur *refc_cur; |
| struct xfs_perag *pag = sc->sa.pag; |
| xfs_fsblock_t fsbno; |
| int error; |
| |
| error = xrep_refc_sort_records(rr); |
| if (error) |
| return error; |
| |
| /* |
| * Prepare to construct the new btree by reserving disk space for the |
| * new btree and setting up all the accounting information we'll need |
| * to root the new btree while it's under construction and before we |
| * attach it to the AG header. |
| */ |
| fsbno = XFS_AGB_TO_FSB(sc->mp, pag->pag_agno, xfs_refc_block(sc->mp)); |
| xrep_newbt_init_ag(&rr->new_btree, sc, &XFS_RMAP_OINFO_REFC, fsbno, |
| XFS_AG_RESV_METADATA); |
| rr->new_btree.bload.get_records = xrep_refc_get_records; |
| rr->new_btree.bload.claim_block = xrep_refc_claim_block; |
| |
| /* Compute how many blocks we'll need. */ |
| refc_cur = xfs_refcountbt_init_cursor(sc->mp, NULL, NULL, pag); |
| xfs_btree_stage_afakeroot(refc_cur, &rr->new_btree.afake); |
| error = xfs_btree_bload_compute_geometry(refc_cur, |
| &rr->new_btree.bload, |
| xfarray_length(rr->refcount_records)); |
| if (error) |
| goto err_cur; |
| |
| /* Last chance to abort before we start committing fixes. */ |
| if (xchk_should_terminate(sc, &error)) |
| goto err_cur; |
| |
| /* Reserve the space we'll need for the new btree. */ |
| error = xrep_newbt_alloc_blocks(&rr->new_btree, |
| rr->new_btree.bload.nr_blocks); |
| if (error) |
| goto err_cur; |
| |
| /* |
| * Due to btree slack factors, it's possible for a new btree to be one |
| * level taller than the old btree. Update the incore btree height so |
| * that we don't trip the verifiers when writing the new btree blocks |
| * to disk. |
| */ |
| pag->pagf_repair_refcount_level = rr->new_btree.bload.btree_height; |
| |
| /* Add all observed refcount records. */ |
| rr->array_cur = XFARRAY_CURSOR_INIT; |
| error = xfs_btree_bload(refc_cur, &rr->new_btree.bload, rr); |
| if (error) |
| goto err_level; |
| |
| /* |
| * Install the new btree in the AG header. After this point the old |
| * btree is no longer accessible and the new tree is live. |
| */ |
| xfs_refcountbt_commit_staged_btree(refc_cur, sc->tp, sc->sa.agf_bp); |
| xfs_btree_del_cursor(refc_cur, 0); |
| |
| /* Reset the AGF counters now that we've changed the btree shape. */ |
| error = xrep_refc_reset_counters(rr); |
| if (error) |
| goto err_newbt; |
| |
| /* Dispose of any unused blocks and the accounting information. */ |
| error = xrep_newbt_commit(&rr->new_btree); |
| if (error) |
| return error; |
| |
| return xrep_roll_ag_trans(sc); |
| |
| err_level: |
| pag->pagf_repair_refcount_level = 0; |
| err_cur: |
| xfs_btree_del_cursor(refc_cur, error); |
| err_newbt: |
| xrep_newbt_cancel(&rr->new_btree); |
| return error; |
| } |
| |
| /* |
| * Now that we've logged the roots of the new btrees, invalidate all of the |
| * old blocks and free them. |
| */ |
| STATIC int |
| xrep_refc_remove_old_tree( |
| struct xrep_refc *rr) |
| { |
| struct xfs_scrub *sc = rr->sc; |
| struct xfs_perag *pag = sc->sa.pag; |
| int error; |
| |
| /* Free the old refcountbt blocks if they're not in use. */ |
| error = xrep_reap_agblocks(sc, &rr->old_refcountbt_blocks, |
| &XFS_RMAP_OINFO_REFC, XFS_AG_RESV_METADATA); |
| if (error) |
| return error; |
| |
| /* |
| * Now that we've zapped all the old refcountbt blocks we can turn off |
| * the alternate height mechanism and reset the per-AG space |
| * reservations. |
| */ |
| pag->pagf_repair_refcount_level = 0; |
| sc->flags |= XREP_RESET_PERAG_RESV; |
| return 0; |
| } |
| |
| /* Rebuild the refcount btree. */ |
| int |
| xrep_refcountbt( |
| struct xfs_scrub *sc) |
| { |
| struct xrep_refc *rr; |
| struct xfs_mount *mp = sc->mp; |
| char *descr; |
| int error; |
| |
| /* We require the rmapbt to rebuild anything. */ |
| if (!xfs_has_rmapbt(mp)) |
| return -EOPNOTSUPP; |
| |
| rr = kzalloc(sizeof(struct xrep_refc), XCHK_GFP_FLAGS); |
| if (!rr) |
| return -ENOMEM; |
| rr->sc = sc; |
| |
| /* Set up enough storage to handle one refcount record per block. */ |
| descr = xchk_xfile_ag_descr(sc, "reference count records"); |
| error = xfarray_create(descr, mp->m_sb.sb_agblocks, |
| sizeof(struct xfs_refcount_irec), |
| &rr->refcount_records); |
| kfree(descr); |
| if (error) |
| goto out_rr; |
| |
| /* Collect all reference counts. */ |
| xagb_bitmap_init(&rr->old_refcountbt_blocks); |
| error = xrep_refc_find_refcounts(rr); |
| if (error) |
| goto out_bitmap; |
| |
| /* Rebuild the refcount information. */ |
| error = xrep_refc_build_new_tree(rr); |
| if (error) |
| goto out_bitmap; |
| |
| /* Kill the old tree. */ |
| error = xrep_refc_remove_old_tree(rr); |
| if (error) |
| goto out_bitmap; |
| |
| out_bitmap: |
| xagb_bitmap_destroy(&rr->old_refcountbt_blocks); |
| xfarray_destroy(rr->refcount_records); |
| out_rr: |
| kfree(rr); |
| return error; |
| } |