blob: bdda315b3bd30c135e4c0d10174fa52a144455fc [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Renesas RZ/G2L MTU3a PWM Timer driver
*
* Copyright (C) 2023 Renesas Electronics Corporation
*
* Hardware manual for this IP can be found here
* https://www.renesas.com/eu/en/document/mah/rzg2l-group-rzg2lc-group-users-manual-hardware-0?language=en
*
* Limitations:
* - When PWM is disabled, the output is driven to Hi-Z.
* - While the hardware supports both polarities, the driver (for now)
* only handles normal polarity.
* - HW uses one counter and two match components to configure duty_cycle
* and period.
* - Multi-Function Timer Pulse Unit (a.k.a MTU) has 7 HW channels for PWM
* operations. (The channels are MTU{0..4, 6, 7}.)
* - MTU{1, 2} channels have a single IO, whereas all other HW channels have
* 2 IOs.
* - Each IO is modelled as an independent PWM channel.
* - rz_mtu3_channel_io_map table is used to map the PWM channel to the
* corresponding HW channel as there are difference in number of IOs
* between HW channels.
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/limits.h>
#include <linux/mfd/rz-mtu3.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/pwm.h>
#include <linux/time.h>
#define RZ_MTU3_MAX_PWM_CHANNELS 12
#define RZ_MTU3_MAX_HW_CHANNELS 7
/**
* struct rz_mtu3_channel_io_map - MTU3 pwm channel map
*
* @base_pwm_number: First PWM of a channel
* @num_channel_ios: number of IOs on the HW channel.
*/
struct rz_mtu3_channel_io_map {
u8 base_pwm_number;
u8 num_channel_ios;
};
/**
* struct rz_mtu3_pwm_channel - MTU3 pwm channel data
*
* @mtu: MTU3 channel data
* @map: MTU3 pwm channel map
*/
struct rz_mtu3_pwm_channel {
struct rz_mtu3_channel *mtu;
const struct rz_mtu3_channel_io_map *map;
};
/**
* struct rz_mtu3_pwm_chip - MTU3 pwm private data
*
* @chip: MTU3 pwm chip data
* @clk: MTU3 module clock
* @lock: Lock to prevent concurrent access for usage count
* @rate: MTU3 clock rate
* @user_count: MTU3 usage count
* @enable_count: MTU3 enable count
* @prescale: MTU3 prescale
* @channel_data: MTU3 pwm channel data
*/
struct rz_mtu3_pwm_chip {
struct pwm_chip chip;
struct clk *clk;
struct mutex lock;
unsigned long rate;
u32 user_count[RZ_MTU3_MAX_HW_CHANNELS];
u32 enable_count[RZ_MTU3_MAX_HW_CHANNELS];
u8 prescale[RZ_MTU3_MAX_HW_CHANNELS];
struct rz_mtu3_pwm_channel channel_data[RZ_MTU3_MAX_HW_CHANNELS];
};
/*
* The MTU channels are {0..4, 6, 7} and the number of IO on MTU1
* and MTU2 channel is 1 compared to 2 on others.
*/
static const struct rz_mtu3_channel_io_map channel_map[] = {
{ 0, 2 }, { 2, 1 }, { 3, 1 }, { 4, 2 }, { 6, 2 }, { 8, 2 }, { 10, 2 }
};
static inline struct rz_mtu3_pwm_chip *to_rz_mtu3_pwm_chip(struct pwm_chip *chip)
{
return container_of(chip, struct rz_mtu3_pwm_chip, chip);
}
static void rz_mtu3_pwm_read_tgr_registers(struct rz_mtu3_pwm_channel *priv,
u16 reg_pv_offset, u16 *pv_val,
u16 reg_dc_offset, u16 *dc_val)
{
*pv_val = rz_mtu3_16bit_ch_read(priv->mtu, reg_pv_offset);
*dc_val = rz_mtu3_16bit_ch_read(priv->mtu, reg_dc_offset);
}
static void rz_mtu3_pwm_write_tgr_registers(struct rz_mtu3_pwm_channel *priv,
u16 reg_pv_offset, u16 pv_val,
u16 reg_dc_offset, u16 dc_val)
{
rz_mtu3_16bit_ch_write(priv->mtu, reg_pv_offset, pv_val);
rz_mtu3_16bit_ch_write(priv->mtu, reg_dc_offset, dc_val);
}
static u8 rz_mtu3_pwm_calculate_prescale(struct rz_mtu3_pwm_chip *rz_mtu3,
u64 period_cycles)
{
u32 prescaled_period_cycles;
u8 prescale;
/*
* Supported prescale values are 1, 4, 16 and 64.
* TODO: Support prescale values 2, 8, 32, 256 and 1024.
*/
prescaled_period_cycles = period_cycles >> 16;
if (prescaled_period_cycles >= 16)
prescale = 3;
else
prescale = (fls(prescaled_period_cycles) + 1) / 2;
return prescale;
}
static struct rz_mtu3_pwm_channel *
rz_mtu3_get_channel(struct rz_mtu3_pwm_chip *rz_mtu3_pwm, u32 hwpwm)
{
struct rz_mtu3_pwm_channel *priv = rz_mtu3_pwm->channel_data;
unsigned int ch;
for (ch = 0; ch < RZ_MTU3_MAX_HW_CHANNELS; ch++, priv++) {
if (priv->map->base_pwm_number + priv->map->num_channel_ios > hwpwm)
break;
}
return priv;
}
static bool rz_mtu3_pwm_is_ch_enabled(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
u32 hwpwm)
{
struct rz_mtu3_pwm_channel *priv;
bool is_channel_en;
u8 val;
priv = rz_mtu3_get_channel(rz_mtu3_pwm, hwpwm);
is_channel_en = rz_mtu3_is_enabled(priv->mtu);
if (!is_channel_en)
return false;
if (priv->map->base_pwm_number == hwpwm)
val = rz_mtu3_8bit_ch_read(priv->mtu, RZ_MTU3_TIORH);
else
val = rz_mtu3_8bit_ch_read(priv->mtu, RZ_MTU3_TIORL);
return val & RZ_MTU3_TIOR_IOA;
}
static int rz_mtu3_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
struct rz_mtu3_pwm_channel *priv;
bool is_mtu3_channel_available;
u32 ch;
priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
ch = priv - rz_mtu3_pwm->channel_data;
mutex_lock(&rz_mtu3_pwm->lock);
/*
* Each channel must be requested only once, so if the channel
* serves two PWMs and the other is already requested, skip over
* rz_mtu3_request_channel()
*/
if (!rz_mtu3_pwm->user_count[ch]) {
is_mtu3_channel_available = rz_mtu3_request_channel(priv->mtu);
if (!is_mtu3_channel_available) {
mutex_unlock(&rz_mtu3_pwm->lock);
return -EBUSY;
}
}
rz_mtu3_pwm->user_count[ch]++;
mutex_unlock(&rz_mtu3_pwm->lock);
return 0;
}
static void rz_mtu3_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
struct rz_mtu3_pwm_channel *priv;
u32 ch;
priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
ch = priv - rz_mtu3_pwm->channel_data;
mutex_lock(&rz_mtu3_pwm->lock);
rz_mtu3_pwm->user_count[ch]--;
if (!rz_mtu3_pwm->user_count[ch])
rz_mtu3_release_channel(priv->mtu);
mutex_unlock(&rz_mtu3_pwm->lock);
}
static int rz_mtu3_pwm_enable(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
struct pwm_device *pwm)
{
struct rz_mtu3_pwm_channel *priv;
u32 ch;
u8 val;
int rc;
rc = pm_runtime_resume_and_get(rz_mtu3_pwm->chip.dev);
if (rc)
return rc;
priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
ch = priv - rz_mtu3_pwm->channel_data;
val = RZ_MTU3_TIOR_OC_IOB_TOGGLE | RZ_MTU3_TIOR_OC_IOA_H_COMP_MATCH;
rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TMDR1, RZ_MTU3_TMDR1_MD_PWMMODE1);
if (priv->map->base_pwm_number == pwm->hwpwm)
rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TIORH, val);
else
rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TIORL, val);
mutex_lock(&rz_mtu3_pwm->lock);
if (!rz_mtu3_pwm->enable_count[ch])
rz_mtu3_enable(priv->mtu);
rz_mtu3_pwm->enable_count[ch]++;
mutex_unlock(&rz_mtu3_pwm->lock);
return 0;
}
static void rz_mtu3_pwm_disable(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
struct pwm_device *pwm)
{
struct rz_mtu3_pwm_channel *priv;
u32 ch;
priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
ch = priv - rz_mtu3_pwm->channel_data;
/* Disable output pins of MTU3 channel */
if (priv->map->base_pwm_number == pwm->hwpwm)
rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TIORH, RZ_MTU3_TIOR_OC_RETAIN);
else
rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TIORL, RZ_MTU3_TIOR_OC_RETAIN);
mutex_lock(&rz_mtu3_pwm->lock);
rz_mtu3_pwm->enable_count[ch]--;
if (!rz_mtu3_pwm->enable_count[ch])
rz_mtu3_disable(priv->mtu);
mutex_unlock(&rz_mtu3_pwm->lock);
pm_runtime_put_sync(rz_mtu3_pwm->chip.dev);
}
static int rz_mtu3_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_state *state)
{
struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
int rc;
rc = pm_runtime_resume_and_get(chip->dev);
if (rc)
return rc;
state->enabled = rz_mtu3_pwm_is_ch_enabled(rz_mtu3_pwm, pwm->hwpwm);
if (state->enabled) {
struct rz_mtu3_pwm_channel *priv;
u8 prescale, val;
u16 dc, pv;
u64 tmp;
priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
if (priv->map->base_pwm_number == pwm->hwpwm)
rz_mtu3_pwm_read_tgr_registers(priv, RZ_MTU3_TGRA, &pv,
RZ_MTU3_TGRB, &dc);
else
rz_mtu3_pwm_read_tgr_registers(priv, RZ_MTU3_TGRC, &pv,
RZ_MTU3_TGRD, &dc);
val = rz_mtu3_8bit_ch_read(priv->mtu, RZ_MTU3_TCR);
prescale = FIELD_GET(RZ_MTU3_TCR_TPCS, val);
/* With prescale <= 7 and pv <= 0xffff this doesn't overflow. */
tmp = NSEC_PER_SEC * (u64)pv << (2 * prescale);
state->period = DIV_ROUND_UP_ULL(tmp, rz_mtu3_pwm->rate);
tmp = NSEC_PER_SEC * (u64)dc << (2 * prescale);
state->duty_cycle = DIV_ROUND_UP_ULL(tmp, rz_mtu3_pwm->rate);
if (state->duty_cycle > state->period)
state->duty_cycle = state->period;
}
state->polarity = PWM_POLARITY_NORMAL;
pm_runtime_put(chip->dev);
return 0;
}
static u16 rz_mtu3_pwm_calculate_pv_or_dc(u64 period_or_duty_cycle, u8 prescale)
{
return min(period_or_duty_cycle >> (2 * prescale), (u64)U16_MAX);
}
static int rz_mtu3_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
struct rz_mtu3_pwm_channel *priv;
u64 period_cycles;
u64 duty_cycles;
u8 prescale;
u16 pv, dc;
u8 val;
u32 ch;
priv = rz_mtu3_get_channel(rz_mtu3_pwm, pwm->hwpwm);
ch = priv - rz_mtu3_pwm->channel_data;
period_cycles = mul_u64_u32_div(state->period, rz_mtu3_pwm->rate,
NSEC_PER_SEC);
prescale = rz_mtu3_pwm_calculate_prescale(rz_mtu3_pwm, period_cycles);
/*
* Prescalar is shared by multiple channels, so prescale can
* NOT be modified when there are multiple channels in use with
* different settings. Modify prescalar if other PWM is off or handle
* it, if current prescale value is less than the one we want to set.
*/
if (rz_mtu3_pwm->enable_count[ch] > 1) {
if (rz_mtu3_pwm->prescale[ch] > prescale)
return -EBUSY;
prescale = rz_mtu3_pwm->prescale[ch];
}
pv = rz_mtu3_pwm_calculate_pv_or_dc(period_cycles, prescale);
duty_cycles = mul_u64_u32_div(state->duty_cycle, rz_mtu3_pwm->rate,
NSEC_PER_SEC);
dc = rz_mtu3_pwm_calculate_pv_or_dc(duty_cycles, prescale);
/*
* If the PWM channel is disabled, make sure to turn on the clock
* before writing the register.
*/
if (!pwm->state.enabled) {
int rc;
rc = pm_runtime_resume_and_get(chip->dev);
if (rc)
return rc;
}
val = RZ_MTU3_TCR_CKEG_RISING | prescale;
/* Counter must be stopped while updating TCR register */
if (rz_mtu3_pwm->prescale[ch] != prescale && rz_mtu3_pwm->enable_count[ch])
rz_mtu3_disable(priv->mtu);
if (priv->map->base_pwm_number == pwm->hwpwm) {
rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TCR,
RZ_MTU3_TCR_CCLR_TGRA | val);
rz_mtu3_pwm_write_tgr_registers(priv, RZ_MTU3_TGRA, pv,
RZ_MTU3_TGRB, dc);
} else {
rz_mtu3_8bit_ch_write(priv->mtu, RZ_MTU3_TCR,
RZ_MTU3_TCR_CCLR_TGRC | val);
rz_mtu3_pwm_write_tgr_registers(priv, RZ_MTU3_TGRC, pv,
RZ_MTU3_TGRD, dc);
}
if (rz_mtu3_pwm->prescale[ch] != prescale) {
/*
* Prescalar is shared by multiple channels, we cache the
* prescalar value from first enabled channel and use the same
* value for both channels.
*/
rz_mtu3_pwm->prescale[ch] = prescale;
if (rz_mtu3_pwm->enable_count[ch])
rz_mtu3_enable(priv->mtu);
}
/* If the PWM is not enabled, turn the clock off again to save power. */
if (!pwm->state.enabled)
pm_runtime_put(chip->dev);
return 0;
}
static int rz_mtu3_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
bool enabled = pwm->state.enabled;
int ret;
if (state->polarity != PWM_POLARITY_NORMAL)
return -EINVAL;
if (!state->enabled) {
if (enabled)
rz_mtu3_pwm_disable(rz_mtu3_pwm, pwm);
return 0;
}
mutex_lock(&rz_mtu3_pwm->lock);
ret = rz_mtu3_pwm_config(chip, pwm, state);
mutex_unlock(&rz_mtu3_pwm->lock);
if (ret)
return ret;
if (!enabled)
ret = rz_mtu3_pwm_enable(rz_mtu3_pwm, pwm);
return ret;
}
static const struct pwm_ops rz_mtu3_pwm_ops = {
.request = rz_mtu3_pwm_request,
.free = rz_mtu3_pwm_free,
.get_state = rz_mtu3_pwm_get_state,
.apply = rz_mtu3_pwm_apply,
};
static int rz_mtu3_pwm_pm_runtime_suspend(struct device *dev)
{
struct rz_mtu3_pwm_chip *rz_mtu3_pwm = dev_get_drvdata(dev);
clk_disable_unprepare(rz_mtu3_pwm->clk);
return 0;
}
static int rz_mtu3_pwm_pm_runtime_resume(struct device *dev)
{
struct rz_mtu3_pwm_chip *rz_mtu3_pwm = dev_get_drvdata(dev);
return clk_prepare_enable(rz_mtu3_pwm->clk);
}
static DEFINE_RUNTIME_DEV_PM_OPS(rz_mtu3_pwm_pm_ops,
rz_mtu3_pwm_pm_runtime_suspend,
rz_mtu3_pwm_pm_runtime_resume, NULL);
static void rz_mtu3_pwm_pm_disable(void *data)
{
struct rz_mtu3_pwm_chip *rz_mtu3_pwm = data;
clk_rate_exclusive_put(rz_mtu3_pwm->clk);
pm_runtime_disable(rz_mtu3_pwm->chip.dev);
pm_runtime_set_suspended(rz_mtu3_pwm->chip.dev);
}
static int rz_mtu3_pwm_probe(struct platform_device *pdev)
{
struct rz_mtu3 *parent_ddata = dev_get_drvdata(pdev->dev.parent);
struct rz_mtu3_pwm_chip *rz_mtu3_pwm;
struct device *dev = &pdev->dev;
unsigned int i, j = 0;
int ret;
rz_mtu3_pwm = devm_kzalloc(&pdev->dev, sizeof(*rz_mtu3_pwm), GFP_KERNEL);
if (!rz_mtu3_pwm)
return -ENOMEM;
rz_mtu3_pwm->clk = parent_ddata->clk;
for (i = 0; i < RZ_MTU_NUM_CHANNELS; i++) {
if (i == RZ_MTU3_CHAN_5 || i == RZ_MTU3_CHAN_8)
continue;
rz_mtu3_pwm->channel_data[j].mtu = &parent_ddata->channels[i];
rz_mtu3_pwm->channel_data[j].mtu->dev = dev;
rz_mtu3_pwm->channel_data[j].map = &channel_map[j];
j++;
}
mutex_init(&rz_mtu3_pwm->lock);
platform_set_drvdata(pdev, rz_mtu3_pwm);
ret = clk_prepare_enable(rz_mtu3_pwm->clk);
if (ret)
return dev_err_probe(dev, ret, "Clock enable failed\n");
clk_rate_exclusive_get(rz_mtu3_pwm->clk);
rz_mtu3_pwm->rate = clk_get_rate(rz_mtu3_pwm->clk);
/*
* Refuse clk rates > 1 GHz to prevent overflow later for computing
* period and duty cycle.
*/
if (rz_mtu3_pwm->rate > NSEC_PER_SEC) {
ret = -EINVAL;
clk_rate_exclusive_put(rz_mtu3_pwm->clk);
goto disable_clock;
}
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
rz_mtu3_pwm->chip.dev = &pdev->dev;
ret = devm_add_action_or_reset(&pdev->dev, rz_mtu3_pwm_pm_disable,
rz_mtu3_pwm);
if (ret < 0)
return ret;
rz_mtu3_pwm->chip.ops = &rz_mtu3_pwm_ops;
rz_mtu3_pwm->chip.npwm = RZ_MTU3_MAX_PWM_CHANNELS;
ret = devm_pwmchip_add(&pdev->dev, &rz_mtu3_pwm->chip);
if (ret)
return dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n");
pm_runtime_idle(&pdev->dev);
return 0;
disable_clock:
clk_disable_unprepare(rz_mtu3_pwm->clk);
return ret;
}
static struct platform_driver rz_mtu3_pwm_driver = {
.driver = {
.name = "pwm-rz-mtu3",
.pm = pm_ptr(&rz_mtu3_pwm_pm_ops),
},
.probe = rz_mtu3_pwm_probe,
};
module_platform_driver(rz_mtu3_pwm_driver);
MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
MODULE_ALIAS("platform:pwm-rz-mtu3");
MODULE_DESCRIPTION("Renesas RZ/G2L MTU3a PWM Timer Driver");
MODULE_LICENSE("GPL");