| config DRM_PANEL |
| bool |
| depends on DRM |
| help |
| Panel registration and lookup framework. |
| |
| menu "Display Panels" |
| depends on DRM && DRM_PANEL |
| |
| config DRM_PANEL_ARM_VERSATILE |
| tristate "ARM Versatile panel driver" |
| depends on OF |
| depends on MFD_SYSCON |
| select VIDEOMODE_HELPERS |
| help |
| This driver supports the ARM Versatile panels connected to ARM |
| reference designs. The panel is detected using special registers |
| in the Versatile family syscon registers. |
| |
| config DRM_PANEL_LVDS |
| tristate "Generic LVDS panel driver" |
| depends on OF |
| depends on BACKLIGHT_CLASS_DEVICE |
| select VIDEOMODE_HELPERS |
| help |
| This driver supports LVDS panels that don't require device-specific |
| handling of power supplies or control signals. It implements automatic |
| backlight handling if the panel is attached to a backlight controller. |
| |
| config DRM_PANEL_SIMPLE |
| tristate "support for simple panels" |
| depends on OF |
| depends on BACKLIGHT_CLASS_DEVICE |
| select VIDEOMODE_HELPERS |
| help |
| DRM panel driver for dumb panels that need at most a regulator and |
| a GPIO to be powered up. Optionally a backlight can be attached so |
| that it can be automatically turned off when the panel goes into a |
| low power state. |
| |
| config DRM_PANEL_ILITEK_IL9322 |
| tristate "Ilitek ILI9322 320x240 QVGA panels" |
| depends on OF && SPI |
| select REGMAP |
| help |
| Say Y here if you want to enable support for Ilitek IL9322 |
| QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. |
| |
| config DRM_PANEL_ILITEK_ILI9881C |
| tristate "Ilitek ILI9881C-based panels" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y if you want to enable support for panels based on the |
| Ilitek ILI9881c controller. |
| |
| config DRM_PANEL_INNOLUX_P079ZCA |
| tristate "Innolux P079ZCA panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Innolux P079ZCA |
| TFT-LCD modules. The panel has a 1024x768 resolution and uses |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to |
| the host and has a built-in LED backlight. |
| |
| config DRM_PANEL_JDI_LT070ME05000 |
| tristate "JDI LT070ME05000 WUXGA DSI panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for JDI DSI video mode |
| panel as found in Google Nexus 7 (2013) devices. |
| The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses |
| 24 bit per pixel. |
| |
| config DRM_PANEL_SAMSUNG_LD9040 |
| tristate "Samsung LD9040 RGB/SPI panel" |
| depends on OF && SPI |
| select VIDEOMODE_HELPERS |
| |
| config DRM_PANEL_LG_LG4573 |
| tristate "LG4573 RGB/SPI panel" |
| depends on OF && SPI |
| select VIDEOMODE_HELPERS |
| help |
| Say Y here if you want to enable support for LG4573 RGB panel. |
| To compile this driver as a module, choose M here. |
| |
| config DRM_PANEL_OLIMEX_LCD_OLINUXINO |
| tristate "Olimex LCD-OLinuXino panel" |
| depends on OF |
| depends on I2C |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| The panel is used with different sizes LCDs, from 480x272 to |
| 1280x800, and 24 bit per pixel. |
| |
| Say Y here if you want to enable support for Olimex Ltd. |
| LCD-OLinuXino panel. |
| |
| config DRM_PANEL_ORISETECH_OTM8009A |
| tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Orise Technology |
| otm8009a 480x800 dsi 2dl panel. |
| |
| config DRM_PANEL_PANASONIC_VVX10F034N00 |
| tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Panasonic VVX10F034N00 |
| WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some |
| Xperia Z2 tablets |
| |
| config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN |
| tristate "Raspberry Pi 7-inch touchscreen panel" |
| depends on DRM_MIPI_DSI |
| help |
| Say Y here if you want to enable support for the Raspberry |
| Pi 7" Touchscreen. To compile this driver as a module, |
| choose M here. |
| |
| config DRM_PANEL_RAYDIUM_RM68200 |
| tristate "Raydium RM68200 720x1280 DSI video mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Raydium RM68200 |
| 720x1280 DSI video mode panel. |
| |
| config DRM_PANEL_SAMSUNG_S6D16D0 |
| tristate "Samsung S6D16D0 DSI video mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| select VIDEOMODE_HELPERS |
| |
| config DRM_PANEL_SAMSUNG_S6E3HA2 |
| tristate "Samsung S6E3HA2 DSI video mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| select VIDEOMODE_HELPERS |
| |
| config DRM_PANEL_SAMSUNG_S6E63J0X03 |
| tristate "Samsung S6E63J0X03 DSI command mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| select VIDEOMODE_HELPERS |
| |
| config DRM_PANEL_SAMSUNG_S6E8AA0 |
| tristate "Samsung S6E8AA0 DSI video mode panel" |
| depends on OF |
| select DRM_MIPI_DSI |
| select VIDEOMODE_HELPERS |
| |
| config DRM_PANEL_SEIKO_43WVF1G |
| tristate "Seiko 43WVF1G panel" |
| depends on OF |
| depends on BACKLIGHT_CLASS_DEVICE |
| select VIDEOMODE_HELPERS |
| help |
| Say Y here if you want to enable support for the Seiko |
| 43WVF1G controller for 800x480 LCD panels |
| |
| config DRM_PANEL_SHARP_LQ101R1SX01 |
| tristate "Sharp LQ101R1SX01 panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Sharp LQ101R1SX01 |
| TFT-LCD modules. The panel has a 2560x1600 resolution and uses |
| 24 bit RGB per pixel. It provides a dual MIPI DSI interface to |
| the host and has a built-in LED backlight. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called panel-sharp-lq101r1sx01. |
| |
| config DRM_PANEL_SHARP_LS043T1LE01 |
| tristate "Sharp LS043T1LE01 qHD video mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Sharp LS043T1LE01 qHD |
| (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard |
| |
| config DRM_PANEL_SITRONIX_ST7789V |
| tristate "Sitronix ST7789V panel" |
| depends on OF && SPI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the Sitronix |
| ST7789V controller for 240x320 LCD panels |
| |
| config DRM_PANEL_TRULY_NT35597_WQXGA |
| tristate "Truly WQXGA" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| help |
| Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI |
| Video Mode panel |
| endmenu |
