| /* |
| * Copyright (c) 2016 Mellanox Technologies. All rights reserved. |
| * Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com> |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the names of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/dmi.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c-mux.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/platform_data/i2c-mux-reg.h> |
| #include <linux/platform_data/mlxreg.h> |
| #include <linux/regmap.h> |
| |
| #define MLX_PLAT_DEVICE_NAME "mlxplat" |
| |
| /* LPC bus IO offsets */ |
| #define MLXPLAT_CPLD_LPC_I2C_BASE_ADRR 0x2000 |
| #define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500 |
| #define MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET 0x00 |
| #define MLXPLAT_CPLD_LPC_REG_CPLD2_VER_OFFSET 0x01 |
| #define MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET 0x1d |
| #define MLXPLAT_CPLD_LPC_REG_LED1_OFFSET 0x20 |
| #define MLXPLAT_CPLD_LPC_REG_LED2_OFFSET 0x21 |
| #define MLXPLAT_CPLD_LPC_REG_LED3_OFFSET 0x22 |
| #define MLXPLAT_CPLD_LPC_REG_LED4_OFFSET 0x23 |
| #define MLXPLAT_CPLD_LPC_REG_LED5_OFFSET 0x24 |
| #define MLXPLAT_CPLD_LPC_REG_GP1_OFFSET 0x30 |
| #define MLXPLAT_CPLD_LPC_REG_WP1_OFFSET 0x31 |
| #define MLXPLAT_CPLD_LPC_REG_GP2_OFFSET 0x32 |
| #define MLXPLAT_CPLD_LPC_REG_WP2_OFFSET 0x33 |
| #define MLXPLAT_CPLD_LPC_REG_PWM_CONTROL_OFFSET 0x37 |
| #define MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET 0x3a |
| #define MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET 0x3b |
| #define MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET 0x40 |
| #define MLXPLAT_CPLD_LPC_REG_AGGRLO_MASK_OFFSET 0x41 |
| #define MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET 0x50 |
| #define MLXPLAT_CPLD_LPC_REG_ASIC_EVENT_OFFSET 0x51 |
| #define MLXPLAT_CPLD_LPC_REG_ASIC_MASK_OFFSET 0x52 |
| #define MLXPLAT_CPLD_LPC_REG_PSU_OFFSET 0x58 |
| #define MLXPLAT_CPLD_LPC_REG_PSU_EVENT_OFFSET 0x59 |
| #define MLXPLAT_CPLD_LPC_REG_PSU_MASK_OFFSET 0x5a |
| #define MLXPLAT_CPLD_LPC_REG_PWR_OFFSET 0x64 |
| #define MLXPLAT_CPLD_LPC_REG_PWR_EVENT_OFFSET 0x65 |
| #define MLXPLAT_CPLD_LPC_REG_PWR_MASK_OFFSET 0x66 |
| #define MLXPLAT_CPLD_LPC_REG_FAN_OFFSET 0x88 |
| #define MLXPLAT_CPLD_LPC_REG_FAN_EVENT_OFFSET 0x89 |
| #define MLXPLAT_CPLD_LPC_REG_FAN_MASK_OFFSET 0x8a |
| #define MLXPLAT_CPLD_LPC_REG_PWM1_OFFSET 0xe3 |
| #define MLXPLAT_CPLD_LPC_REG_TACHO1_OFFSET 0xe4 |
| #define MLXPLAT_CPLD_LPC_REG_TACHO2_OFFSET 0xe5 |
| #define MLXPLAT_CPLD_LPC_REG_TACHO3_OFFSET 0xe6 |
| #define MLXPLAT_CPLD_LPC_REG_TACHO4_OFFSET 0xe7 |
| #define MLXPLAT_CPLD_LPC_REG_TACHO5_OFFSET 0xe8 |
| #define MLXPLAT_CPLD_LPC_REG_TACHO6_OFFSET 0xe9 |
| #define MLXPLAT_CPLD_LPC_REG_TACHO7_OFFSET 0xea |
| #define MLXPLAT_CPLD_LPC_REG_TACHO8_OFFSET 0xeb |
| #define MLXPLAT_CPLD_LPC_REG_TACHO9_OFFSET 0xec |
| #define MLXPLAT_CPLD_LPC_REG_TACHO10_OFFSET 0xed |
| #define MLXPLAT_CPLD_LPC_REG_TACHO11_OFFSET 0xee |
| #define MLXPLAT_CPLD_LPC_REG_TACHO12_OFFSET 0xef |
| #define MLXPLAT_CPLD_LPC_IO_RANGE 0x100 |
| #define MLXPLAT_CPLD_LPC_I2C_CH1_OFF 0xdb |
| #define MLXPLAT_CPLD_LPC_I2C_CH2_OFF 0xda |
| |
| #define MLXPLAT_CPLD_LPC_PIO_OFFSET 0x10000UL |
| #define MLXPLAT_CPLD_LPC_REG1 ((MLXPLAT_CPLD_LPC_REG_BASE_ADRR + \ |
| MLXPLAT_CPLD_LPC_I2C_CH1_OFF) | \ |
| MLXPLAT_CPLD_LPC_PIO_OFFSET) |
| #define MLXPLAT_CPLD_LPC_REG2 ((MLXPLAT_CPLD_LPC_REG_BASE_ADRR + \ |
| MLXPLAT_CPLD_LPC_I2C_CH2_OFF) | \ |
| MLXPLAT_CPLD_LPC_PIO_OFFSET) |
| |
| /* Masks for aggregation, psu, pwr and fan event in CPLD related registers. */ |
| #define MLXPLAT_CPLD_AGGR_ASIC_MASK_DEF 0x04 |
| #define MLXPLAT_CPLD_AGGR_PSU_MASK_DEF 0x08 |
| #define MLXPLAT_CPLD_AGGR_PWR_MASK_DEF 0x08 |
| #define MLXPLAT_CPLD_AGGR_FAN_MASK_DEF 0x40 |
| #define MLXPLAT_CPLD_AGGR_MASK_DEF (MLXPLAT_CPLD_AGGR_ASIC_MASK_DEF | \ |
| MLXPLAT_CPLD_AGGR_PSU_MASK_DEF | \ |
| MLXPLAT_CPLD_AGGR_FAN_MASK_DEF) |
| #define MLXPLAT_CPLD_AGGR_ASIC_MASK_NG 0x01 |
| #define MLXPLAT_CPLD_AGGR_MASK_NG_DEF 0x04 |
| #define MLXPLAT_CPLD_LOW_AGGR_MASK_LOW 0xc1 |
| #define MLXPLAT_CPLD_PSU_MASK GENMASK(1, 0) |
| #define MLXPLAT_CPLD_PWR_MASK GENMASK(1, 0) |
| #define MLXPLAT_CPLD_FAN_MASK GENMASK(3, 0) |
| #define MLXPLAT_CPLD_ASIC_MASK GENMASK(1, 0) |
| #define MLXPLAT_CPLD_FAN_NG_MASK GENMASK(5, 0) |
| #define MLXPLAT_CPLD_LED_LO_NIBBLE_MASK GENMASK(7, 4) |
| #define MLXPLAT_CPLD_LED_HI_NIBBLE_MASK GENMASK(3, 0) |
| |
| /* Default I2C parent bus number */ |
| #define MLXPLAT_CPLD_PHYS_ADAPTER_DEF_NR 1 |
| |
| /* Maximum number of possible physical buses equipped on system */ |
| #define MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM 16 |
| |
| /* Number of channels in group */ |
| #define MLXPLAT_CPLD_GRP_CHNL_NUM 8 |
| |
| /* Start channel numbers */ |
| #define MLXPLAT_CPLD_CH1 2 |
| #define MLXPLAT_CPLD_CH2 10 |
| |
| /* Number of LPC attached MUX platform devices */ |
| #define MLXPLAT_CPLD_LPC_MUX_DEVS 2 |
| |
| /* Hotplug devices adapter numbers */ |
| #define MLXPLAT_CPLD_NR_NONE -1 |
| #define MLXPLAT_CPLD_PSU_DEFAULT_NR 10 |
| #define MLXPLAT_CPLD_PSU_MSNXXXX_NR 4 |
| #define MLXPLAT_CPLD_FAN1_DEFAULT_NR 11 |
| #define MLXPLAT_CPLD_FAN2_DEFAULT_NR 12 |
| #define MLXPLAT_CPLD_FAN3_DEFAULT_NR 13 |
| #define MLXPLAT_CPLD_FAN4_DEFAULT_NR 14 |
| |
| /* mlxplat_priv - platform private data |
| * @pdev_i2c - i2c controller platform device |
| * @pdev_mux - array of mux platform devices |
| * @pdev_hotplug - hotplug platform devices |
| * @pdev_led - led platform devices |
| * @pdev_io_regs - register access platform devices |
| * @pdev_fan - FAN platform devices |
| */ |
| struct mlxplat_priv { |
| struct platform_device *pdev_i2c; |
| struct platform_device *pdev_mux[MLXPLAT_CPLD_LPC_MUX_DEVS]; |
| struct platform_device *pdev_hotplug; |
| struct platform_device *pdev_led; |
| struct platform_device *pdev_io_regs; |
| struct platform_device *pdev_fan; |
| }; |
| |
| /* Regions for LPC I2C controller and LPC base register space */ |
| static const struct resource mlxplat_lpc_resources[] = { |
| [0] = DEFINE_RES_NAMED(MLXPLAT_CPLD_LPC_I2C_BASE_ADRR, |
| MLXPLAT_CPLD_LPC_IO_RANGE, |
| "mlxplat_cpld_lpc_i2c_ctrl", IORESOURCE_IO), |
| [1] = DEFINE_RES_NAMED(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, |
| MLXPLAT_CPLD_LPC_IO_RANGE, |
| "mlxplat_cpld_lpc_regs", |
| IORESOURCE_IO), |
| }; |
| |
| /* Platform default channels */ |
| static const int mlxplat_default_channels[][MLXPLAT_CPLD_GRP_CHNL_NUM] = { |
| { |
| MLXPLAT_CPLD_CH1, MLXPLAT_CPLD_CH1 + 1, MLXPLAT_CPLD_CH1 + 2, |
| MLXPLAT_CPLD_CH1 + 3, MLXPLAT_CPLD_CH1 + 4, MLXPLAT_CPLD_CH1 + |
| 5, MLXPLAT_CPLD_CH1 + 6, MLXPLAT_CPLD_CH1 + 7 |
| }, |
| { |
| MLXPLAT_CPLD_CH2, MLXPLAT_CPLD_CH2 + 1, MLXPLAT_CPLD_CH2 + 2, |
| MLXPLAT_CPLD_CH2 + 3, MLXPLAT_CPLD_CH2 + 4, MLXPLAT_CPLD_CH2 + |
| 5, MLXPLAT_CPLD_CH2 + 6, MLXPLAT_CPLD_CH2 + 7 |
| }, |
| }; |
| |
| /* Platform channels for MSN21xx system family */ |
| static const int mlxplat_msn21xx_channels[] = { 1, 2, 3, 4, 5, 6, 7, 8 }; |
| |
| /* Platform mux data */ |
| static struct i2c_mux_reg_platform_data mlxplat_mux_data[] = { |
| { |
| .parent = 1, |
| .base_nr = MLXPLAT_CPLD_CH1, |
| .write_only = 1, |
| .reg = (void __iomem *)MLXPLAT_CPLD_LPC_REG1, |
| .reg_size = 1, |
| .idle_in_use = 1, |
| }, |
| { |
| .parent = 1, |
| .base_nr = MLXPLAT_CPLD_CH2, |
| .write_only = 1, |
| .reg = (void __iomem *)MLXPLAT_CPLD_LPC_REG2, |
| .reg_size = 1, |
| .idle_in_use = 1, |
| }, |
| |
| }; |
| |
| /* Platform hotplug devices */ |
| static struct i2c_board_info mlxplat_mlxcpld_psu[] = { |
| { |
| I2C_BOARD_INFO("24c02", 0x51), |
| }, |
| { |
| I2C_BOARD_INFO("24c02", 0x50), |
| }, |
| }; |
| |
| static struct i2c_board_info mlxplat_mlxcpld_ng_psu[] = { |
| { |
| I2C_BOARD_INFO("24c32", 0x51), |
| }, |
| { |
| I2C_BOARD_INFO("24c32", 0x50), |
| }, |
| }; |
| |
| static struct i2c_board_info mlxplat_mlxcpld_pwr[] = { |
| { |
| I2C_BOARD_INFO("dps460", 0x59), |
| }, |
| { |
| I2C_BOARD_INFO("dps460", 0x58), |
| }, |
| }; |
| |
| static struct i2c_board_info mlxplat_mlxcpld_fan[] = { |
| { |
| I2C_BOARD_INFO("24c32", 0x50), |
| }, |
| { |
| I2C_BOARD_INFO("24c32", 0x50), |
| }, |
| { |
| I2C_BOARD_INFO("24c32", 0x50), |
| }, |
| { |
| I2C_BOARD_INFO("24c32", 0x50), |
| }, |
| }; |
| |
| /* Platform hotplug default data */ |
| static struct mlxreg_core_data mlxplat_mlxcpld_default_psu_items_data[] = { |
| { |
| .label = "psu1", |
| .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET, |
| .mask = BIT(0), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_psu[0], |
| .hpdev.nr = MLXPLAT_CPLD_PSU_DEFAULT_NR, |
| }, |
| { |
| .label = "psu2", |
| .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET, |
| .mask = BIT(1), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_psu[1], |
| .hpdev.nr = MLXPLAT_CPLD_PSU_DEFAULT_NR, |
| }, |
| }; |
| |
| static struct mlxreg_core_data mlxplat_mlxcpld_default_pwr_items_data[] = { |
| { |
| .label = "pwr1", |
| .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET, |
| .mask = BIT(0), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_pwr[0], |
| .hpdev.nr = MLXPLAT_CPLD_PSU_DEFAULT_NR, |
| }, |
| { |
| .label = "pwr2", |
| .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET, |
| .mask = BIT(1), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_pwr[1], |
| .hpdev.nr = MLXPLAT_CPLD_PSU_DEFAULT_NR, |
| }, |
| }; |
| |
| static struct mlxreg_core_data mlxplat_mlxcpld_default_fan_items_data[] = { |
| { |
| .label = "fan1", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(0), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_fan[0], |
| .hpdev.nr = MLXPLAT_CPLD_FAN1_DEFAULT_NR, |
| }, |
| { |
| .label = "fan2", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(1), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_fan[1], |
| .hpdev.nr = MLXPLAT_CPLD_FAN2_DEFAULT_NR, |
| }, |
| { |
| .label = "fan3", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(2), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_fan[2], |
| .hpdev.nr = MLXPLAT_CPLD_FAN3_DEFAULT_NR, |
| }, |
| { |
| .label = "fan4", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(3), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_fan[3], |
| .hpdev.nr = MLXPLAT_CPLD_FAN4_DEFAULT_NR, |
| }, |
| }; |
| |
| static struct mlxreg_core_data mlxplat_mlxcpld_default_asic_items_data[] = { |
| { |
| .label = "asic1", |
| .reg = MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET, |
| .mask = MLXPLAT_CPLD_ASIC_MASK, |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| }; |
| |
| static struct mlxreg_core_item mlxplat_mlxcpld_default_items[] = { |
| { |
| .data = mlxplat_mlxcpld_default_psu_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_PSU_MASK_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET, |
| .mask = MLXPLAT_CPLD_PSU_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_psu), |
| .inversed = 1, |
| .health = false, |
| }, |
| { |
| .data = mlxplat_mlxcpld_default_pwr_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_PWR_MASK_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET, |
| .mask = MLXPLAT_CPLD_PWR_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_pwr), |
| .inversed = 0, |
| .health = false, |
| }, |
| { |
| .data = mlxplat_mlxcpld_default_fan_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_FAN_MASK_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = MLXPLAT_CPLD_FAN_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_fan), |
| .inversed = 1, |
| .health = false, |
| }, |
| { |
| .data = mlxplat_mlxcpld_default_asic_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_ASIC_MASK_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET, |
| .mask = MLXPLAT_CPLD_ASIC_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_default_asic_items_data), |
| .inversed = 0, |
| .health = true, |
| }, |
| }; |
| |
| static |
| struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_default_data = { |
| .items = mlxplat_mlxcpld_default_items, |
| .counter = ARRAY_SIZE(mlxplat_mlxcpld_default_items), |
| .cell = MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET, |
| .mask = MLXPLAT_CPLD_AGGR_MASK_DEF, |
| .cell_low = MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET, |
| .mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW, |
| }; |
| |
| static struct mlxreg_core_data mlxplat_mlxcpld_msn21xx_pwr_items_data[] = { |
| { |
| .label = "pwr1", |
| .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET, |
| .mask = BIT(0), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| { |
| .label = "pwr2", |
| .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET, |
| .mask = BIT(1), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| }; |
| |
| /* Platform hotplug MSN21xx system family data */ |
| static struct mlxreg_core_item mlxplat_mlxcpld_msn21xx_items[] = { |
| { |
| .data = mlxplat_mlxcpld_msn21xx_pwr_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_PWR_MASK_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET, |
| .mask = MLXPLAT_CPLD_PWR_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_msn21xx_pwr_items_data), |
| .inversed = 0, |
| .health = false, |
| }, |
| { |
| .data = mlxplat_mlxcpld_default_asic_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_ASIC_MASK_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET, |
| .mask = MLXPLAT_CPLD_ASIC_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_default_asic_items_data), |
| .inversed = 0, |
| .health = true, |
| }, |
| }; |
| |
| static |
| struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_msn21xx_data = { |
| .items = mlxplat_mlxcpld_msn21xx_items, |
| .counter = ARRAY_SIZE(mlxplat_mlxcpld_msn21xx_items), |
| .cell = MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET, |
| .mask = MLXPLAT_CPLD_AGGR_MASK_DEF, |
| .cell_low = MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET, |
| .mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW, |
| }; |
| |
| /* Platform hotplug msn274x system family data */ |
| static struct mlxreg_core_data mlxplat_mlxcpld_msn274x_psu_items_data[] = { |
| { |
| .label = "psu1", |
| .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET, |
| .mask = BIT(0), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_psu[0], |
| .hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR, |
| }, |
| { |
| .label = "psu2", |
| .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET, |
| .mask = BIT(1), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_psu[1], |
| .hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR, |
| }, |
| }; |
| |
| static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_pwr_items_data[] = { |
| { |
| .label = "pwr1", |
| .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET, |
| .mask = BIT(0), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_pwr[0], |
| .hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR, |
| }, |
| { |
| .label = "pwr2", |
| .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET, |
| .mask = BIT(1), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_pwr[1], |
| .hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR, |
| }, |
| }; |
| |
| static struct mlxreg_core_data mlxplat_mlxcpld_msn274x_fan_items_data[] = { |
| { |
| .label = "fan1", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(0), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| { |
| .label = "fan2", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(1), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| { |
| .label = "fan3", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(2), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| { |
| .label = "fan4", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(3), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| }; |
| |
| static struct mlxreg_core_item mlxplat_mlxcpld_msn274x_items[] = { |
| { |
| .data = mlxplat_mlxcpld_msn274x_psu_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET, |
| .mask = MLXPLAT_CPLD_PSU_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_msn274x_psu_items_data), |
| .inversed = 1, |
| .health = false, |
| }, |
| { |
| .data = mlxplat_mlxcpld_default_ng_pwr_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET, |
| .mask = MLXPLAT_CPLD_PWR_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_default_ng_pwr_items_data), |
| .inversed = 0, |
| .health = false, |
| }, |
| { |
| .data = mlxplat_mlxcpld_msn274x_fan_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = MLXPLAT_CPLD_FAN_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_msn274x_fan_items_data), |
| .inversed = 1, |
| .health = false, |
| }, |
| { |
| .data = mlxplat_mlxcpld_default_asic_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET, |
| .mask = MLXPLAT_CPLD_ASIC_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_default_asic_items_data), |
| .inversed = 0, |
| .health = true, |
| }, |
| }; |
| |
| static |
| struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_msn274x_data = { |
| .items = mlxplat_mlxcpld_msn274x_items, |
| .counter = ARRAY_SIZE(mlxplat_mlxcpld_msn274x_items), |
| .cell = MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET, |
| .mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF, |
| .cell_low = MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET, |
| .mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW, |
| }; |
| |
| /* Platform hotplug MSN201x system family data */ |
| static struct mlxreg_core_data mlxplat_mlxcpld_msn201x_pwr_items_data[] = { |
| { |
| .label = "pwr1", |
| .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET, |
| .mask = BIT(0), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| { |
| .label = "pwr2", |
| .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET, |
| .mask = BIT(1), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| }; |
| |
| static struct mlxreg_core_item mlxplat_mlxcpld_msn201x_items[] = { |
| { |
| .data = mlxplat_mlxcpld_msn201x_pwr_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_PWR_MASK_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET, |
| .mask = MLXPLAT_CPLD_PWR_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_msn201x_pwr_items_data), |
| .inversed = 0, |
| .health = false, |
| }, |
| { |
| .data = mlxplat_mlxcpld_default_asic_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_ASIC_MASK_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET, |
| .mask = MLXPLAT_CPLD_ASIC_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_default_asic_items_data), |
| .inversed = 0, |
| .health = true, |
| }, |
| }; |
| |
| static |
| struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_msn201x_data = { |
| .items = mlxplat_mlxcpld_msn201x_items, |
| .counter = ARRAY_SIZE(mlxplat_mlxcpld_msn201x_items), |
| .cell = MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET, |
| .mask = MLXPLAT_CPLD_AGGR_MASK_DEF, |
| .cell_low = MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET, |
| .mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW, |
| }; |
| |
| /* Platform hotplug next generation system family data */ |
| static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_psu_items_data[] = { |
| { |
| .label = "psu1", |
| .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET, |
| .mask = BIT(0), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_ng_psu[0], |
| .hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR, |
| }, |
| { |
| .label = "psu2", |
| .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET, |
| .mask = BIT(1), |
| .hpdev.brdinfo = &mlxplat_mlxcpld_ng_psu[1], |
| .hpdev.nr = MLXPLAT_CPLD_PSU_MSNXXXX_NR, |
| }, |
| }; |
| |
| static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_fan_items_data[] = { |
| { |
| .label = "fan1", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(0), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| { |
| .label = "fan2", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(1), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| { |
| .label = "fan3", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(2), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| { |
| .label = "fan4", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(3), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| { |
| .label = "fan5", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(4), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| { |
| .label = "fan6", |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = BIT(5), |
| .hpdev.nr = MLXPLAT_CPLD_NR_NONE, |
| }, |
| }; |
| |
| static struct mlxreg_core_item mlxplat_mlxcpld_default_ng_items[] = { |
| { |
| .data = mlxplat_mlxcpld_default_ng_psu_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET, |
| .mask = MLXPLAT_CPLD_PSU_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_default_ng_psu_items_data), |
| .inversed = 1, |
| .health = false, |
| }, |
| { |
| .data = mlxplat_mlxcpld_default_ng_pwr_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_PWR_OFFSET, |
| .mask = MLXPLAT_CPLD_PWR_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_default_ng_pwr_items_data), |
| .inversed = 0, |
| .health = false, |
| }, |
| { |
| .data = mlxplat_mlxcpld_default_ng_fan_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_FAN_OFFSET, |
| .mask = MLXPLAT_CPLD_FAN_NG_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_default_ng_fan_items_data), |
| .inversed = 1, |
| .health = false, |
| }, |
| { |
| .data = mlxplat_mlxcpld_default_asic_items_data, |
| .aggr_mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF, |
| .reg = MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET, |
| .mask = MLXPLAT_CPLD_ASIC_MASK, |
| .count = ARRAY_SIZE(mlxplat_mlxcpld_default_asic_items_data), |
| .inversed = 0, |
| .health = true, |
| }, |
| }; |
| |
| static |
| struct mlxreg_core_hotplug_platform_data mlxplat_mlxcpld_default_ng_data = { |
| .items = mlxplat_mlxcpld_default_ng_items, |
| .counter = ARRAY_SIZE(mlxplat_mlxcpld_default_ng_items), |
| .cell = MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET, |
| .mask = MLXPLAT_CPLD_AGGR_MASK_NG_DEF, |
| .cell_low = MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET, |
| .mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW, |
| }; |
| |
| /* Platform led default data */ |
| static struct mlxreg_core_data mlxplat_mlxcpld_default_led_data[] = { |
| { |
| .label = "status:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "status:red", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK |
| }, |
| { |
| .label = "psu:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "psu:red", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan1:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan1:red", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan2:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan2:red", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan3:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan3:red", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan4:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan4:red", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| }; |
| |
| static struct mlxreg_core_platform_data mlxplat_default_led_data = { |
| .data = mlxplat_mlxcpld_default_led_data, |
| .counter = ARRAY_SIZE(mlxplat_mlxcpld_default_led_data), |
| }; |
| |
| /* Platform led MSN21xx system family data */ |
| static struct mlxreg_core_data mlxplat_mlxcpld_msn21xx_led_data[] = { |
| { |
| .label = "status:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "status:red", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK |
| }, |
| { |
| .label = "fan:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan:red", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "psu1:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "psu1:red", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "psu2:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "psu2:red", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "uid:blue", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED5_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| }; |
| |
| static struct mlxreg_core_platform_data mlxplat_msn21xx_led_data = { |
| .data = mlxplat_mlxcpld_msn21xx_led_data, |
| .counter = ARRAY_SIZE(mlxplat_mlxcpld_msn21xx_led_data), |
| }; |
| |
| /* Platform led for default data for 200GbE systems */ |
| static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_led_data[] = { |
| { |
| .label = "status:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "status:orange", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK |
| }, |
| { |
| .label = "psu:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "psu:orange", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan1:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan1:orange", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan2:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan2:orange", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan3:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan3:orange", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan4:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan4:orange", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan5:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan5:orange", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan6:green", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| { |
| .label = "fan6:orange", |
| .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET, |
| .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK, |
| }, |
| }; |
| |
| static struct mlxreg_core_platform_data mlxplat_default_ng_led_data = { |
| .data = mlxplat_mlxcpld_default_ng_led_data, |
| .counter = ARRAY_SIZE(mlxplat_mlxcpld_default_ng_led_data), |
| }; |
| |
| /* Platform register access default */ |
| static struct mlxreg_core_data mlxplat_mlxcpld_default_regs_io_data[] = { |
| { |
| .label = "cpld1_version", |
| .reg = MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET, |
| .bit = GENMASK(7, 0), |
| .mode = 0444, |
| }, |
| { |
| .label = "cpld2_version", |
| .reg = MLXPLAT_CPLD_LPC_REG_CPLD2_VER_OFFSET, |
| .bit = GENMASK(7, 0), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_long_pb", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(0), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_short_pb", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(1), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_aux_pwr_or_ref", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(2), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_main_pwr_fail", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(3), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_sw_reset", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(4), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_fw_reset", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(5), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_hotswap_or_wd", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(6), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_asic_thermal", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(7), |
| .mode = 0444, |
| }, |
| { |
| .label = "psu1_on", |
| .reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(0), |
| .mode = 0200, |
| }, |
| { |
| .label = "psu2_on", |
| .reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(1), |
| .mode = 0200, |
| }, |
| { |
| .label = "pwr_cycle", |
| .reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(2), |
| .mode = 0200, |
| }, |
| { |
| .label = "pwr_down", |
| .reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(3), |
| .mode = 0200, |
| }, |
| { |
| .label = "select_iio", |
| .reg = MLXPLAT_CPLD_LPC_REG_GP2_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(6), |
| .mode = 0644, |
| }, |
| { |
| .label = "asic_health", |
| .reg = MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET, |
| .mask = MLXPLAT_CPLD_ASIC_MASK, |
| .bit = 1, |
| .mode = 0444, |
| }, |
| }; |
| |
| static struct mlxreg_core_platform_data mlxplat_default_regs_io_data = { |
| .data = mlxplat_mlxcpld_default_regs_io_data, |
| .counter = ARRAY_SIZE(mlxplat_mlxcpld_default_regs_io_data), |
| }; |
| |
| /* Platform register access MSN21xx, MSN201x, MSN274x systems families data */ |
| static struct mlxreg_core_data mlxplat_mlxcpld_msn21xx_regs_io_data[] = { |
| { |
| .label = "cpld1_version", |
| .reg = MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET, |
| .bit = GENMASK(7, 0), |
| .mode = 0444, |
| }, |
| { |
| .label = "cpld2_version", |
| .reg = MLXPLAT_CPLD_LPC_REG_CPLD2_VER_OFFSET, |
| .bit = GENMASK(7, 0), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_long_pb", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(0), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_short_pb", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(1), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_aux_pwr_or_ref", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(2), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_sw_reset", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(3), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_main_pwr_fail", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(4), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_asic_thermal", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(5), |
| .mode = 0444, |
| }, |
| { |
| .label = "reset_hotswap_or_halt", |
| .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(6), |
| .mode = 0444, |
| }, |
| { |
| .label = "psu1_on", |
| .reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(0), |
| .mode = 0200, |
| }, |
| { |
| .label = "psu2_on", |
| .reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(1), |
| .mode = 0200, |
| }, |
| { |
| .label = "pwr_cycle", |
| .reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(2), |
| .mode = 0200, |
| }, |
| { |
| .label = "pwr_down", |
| .reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET, |
| .mask = GENMASK(7, 0) & ~BIT(3), |
| .mode = 0200, |
| }, |
| { |
| .label = "asic_health", |
| .reg = MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET, |
| .mask = MLXPLAT_CPLD_ASIC_MASK, |
| .bit = 1, |
| .mode = 0444, |
| }, |
| }; |
| |
| static struct mlxreg_core_platform_data mlxplat_msn21xx_regs_io_data = { |
| .data = mlxplat_mlxcpld_msn21xx_regs_io_data, |
| .counter = ARRAY_SIZE(mlxplat_mlxcpld_msn21xx_regs_io_data), |
| }; |
| |
| /* Platform FAN default */ |
| static struct mlxreg_core_data mlxplat_mlxcpld_default_fan_data[] = { |
| { |
| .label = "pwm1", |
| .reg = MLXPLAT_CPLD_LPC_REG_PWM1_OFFSET, |
| }, |
| { |
| .label = "tacho1", |
| .reg = MLXPLAT_CPLD_LPC_REG_TACHO1_OFFSET, |
| .mask = GENMASK(7, 0), |
| }, |
| { |
| .label = "tacho2", |
| .reg = MLXPLAT_CPLD_LPC_REG_TACHO2_OFFSET, |
| .mask = GENMASK(7, 0), |
| }, |
| { |
| .label = "tacho3", |
| .reg = MLXPLAT_CPLD_LPC_REG_TACHO3_OFFSET, |
| .mask = GENMASK(7, 0), |
| }, |
| { |
| .label = "tacho4", |
| .reg = MLXPLAT_CPLD_LPC_REG_TACHO4_OFFSET, |
| .mask = GENMASK(7, 0), |
| }, |
| { |
| .label = "tacho5", |
| .reg = MLXPLAT_CPLD_LPC_REG_TACHO5_OFFSET, |
| .mask = GENMASK(7, 0), |
| }, |
| { |
| .label = "tacho6", |
| .reg = MLXPLAT_CPLD_LPC_REG_TACHO6_OFFSET, |
| .mask = GENMASK(7, 0), |
| }, |
| { |
| .label = "tacho7", |
| .reg = MLXPLAT_CPLD_LPC_REG_TACHO7_OFFSET, |
| .mask = GENMASK(7, 0), |
| }, |
| { |
| .label = "tacho8", |
| .reg = MLXPLAT_CPLD_LPC_REG_TACHO8_OFFSET, |
| .mask = GENMASK(7, 0), |
| }, |
| { |
| .label = "tacho9", |
| .reg = MLXPLAT_CPLD_LPC_REG_TACHO9_OFFSET, |
| .mask = GENMASK(7, 0), |
| }, |
| { |
| .label = "tacho10", |
| .reg = MLXPLAT_CPLD_LPC_REG_TACHO10_OFFSET, |
| .mask = GENMASK(7, 0), |
| }, |
| { |
| .label = "tacho11", |
| .reg = MLXPLAT_CPLD_LPC_REG_TACHO11_OFFSET, |
| .mask = GENMASK(7, 0), |
| }, |
| { |
| .label = "tacho12", |
| .reg = MLXPLAT_CPLD_LPC_REG_TACHO12_OFFSET, |
| .mask = GENMASK(7, 0), |
| }, |
| }; |
| |
| static struct mlxreg_core_platform_data mlxplat_default_fan_data = { |
| .data = mlxplat_mlxcpld_default_fan_data, |
| .counter = ARRAY_SIZE(mlxplat_mlxcpld_default_fan_data), |
| }; |
| |
| static bool mlxplat_mlxcpld_writeable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case MLXPLAT_CPLD_LPC_REG_LED1_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED2_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED3_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED4_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED5_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_GP1_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_WP1_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_GP2_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_WP2_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_AGGRLO_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_ASIC_EVENT_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_ASIC_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PSU_EVENT_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PSU_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWR_EVENT_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWR_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_FAN_EVENT_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_FAN_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWM1_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWM_CONTROL_OFFSET: |
| return true; |
| } |
| return false; |
| } |
| |
| static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_CPLD2_VER_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED1_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED2_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED3_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED4_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED5_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_GP1_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_WP1_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_GP2_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_WP2_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_AGGRLO_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_ASIC_EVENT_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_ASIC_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PSU_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PSU_EVENT_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PSU_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWR_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWR_EVENT_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWR_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_FAN_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_FAN_EVENT_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_FAN_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWM1_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO1_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO2_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO3_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO4_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO5_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO6_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO7_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO8_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO9_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO10_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO11_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO12_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWM_CONTROL_OFFSET: |
| return true; |
| } |
| return false; |
| } |
| |
| static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_CPLD2_VER_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED1_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED2_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED3_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED4_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_LED5_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_GP1_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_GP2_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_AGGRLO_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_ASIC_HEALTH_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_ASIC_EVENT_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_ASIC_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PSU_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PSU_EVENT_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PSU_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWR_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWR_EVENT_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWR_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_FAN_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_FAN_EVENT_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_FAN_MASK_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWM1_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO1_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO2_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO3_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO4_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO5_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO6_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO7_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO8_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO9_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO10_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO11_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_TACHO12_OFFSET: |
| case MLXPLAT_CPLD_LPC_REG_PWM_CONTROL_OFFSET: |
| return true; |
| } |
| return false; |
| } |
| |
| static const struct reg_default mlxplat_mlxcpld_regmap_default[] = { |
| { MLXPLAT_CPLD_LPC_REG_WP1_OFFSET, 0x00 }, |
| { MLXPLAT_CPLD_LPC_REG_WP2_OFFSET, 0x00 }, |
| { MLXPLAT_CPLD_LPC_REG_PWM_CONTROL_OFFSET, 0x00 }, |
| }; |
| |
| struct mlxplat_mlxcpld_regmap_context { |
| void __iomem *base; |
| }; |
| |
| static struct mlxplat_mlxcpld_regmap_context mlxplat_mlxcpld_regmap_ctx; |
| |
| static int |
| mlxplat_mlxcpld_reg_read(void *context, unsigned int reg, unsigned int *val) |
| { |
| struct mlxplat_mlxcpld_regmap_context *ctx = context; |
| |
| *val = ioread8(ctx->base + reg); |
| return 0; |
| } |
| |
| static int |
| mlxplat_mlxcpld_reg_write(void *context, unsigned int reg, unsigned int val) |
| { |
| struct mlxplat_mlxcpld_regmap_context *ctx = context; |
| |
| iowrite8(val, ctx->base + reg); |
| return 0; |
| } |
| |
| static const struct regmap_config mlxplat_mlxcpld_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 255, |
| .cache_type = REGCACHE_FLAT, |
| .writeable_reg = mlxplat_mlxcpld_writeable_reg, |
| .readable_reg = mlxplat_mlxcpld_readable_reg, |
| .volatile_reg = mlxplat_mlxcpld_volatile_reg, |
| .reg_defaults = mlxplat_mlxcpld_regmap_default, |
| .num_reg_defaults = ARRAY_SIZE(mlxplat_mlxcpld_regmap_default), |
| .reg_read = mlxplat_mlxcpld_reg_read, |
| .reg_write = mlxplat_mlxcpld_reg_write, |
| }; |
| |
| static struct resource mlxplat_mlxcpld_resources[] = { |
| [0] = DEFINE_RES_IRQ_NAMED(17, "mlxreg-hotplug"), |
| }; |
| |
| static struct platform_device *mlxplat_dev; |
| static struct mlxreg_core_hotplug_platform_data *mlxplat_hotplug; |
| static struct mlxreg_core_platform_data *mlxplat_led; |
| static struct mlxreg_core_platform_data *mlxplat_regs_io; |
| static struct mlxreg_core_platform_data *mlxplat_fan; |
| |
| static int __init mlxplat_dmi_default_matched(const struct dmi_system_id *dmi) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) { |
| mlxplat_mux_data[i].values = mlxplat_default_channels[i]; |
| mlxplat_mux_data[i].n_values = |
| ARRAY_SIZE(mlxplat_default_channels[i]); |
| } |
| mlxplat_hotplug = &mlxplat_mlxcpld_default_data; |
| mlxplat_hotplug->deferred_nr = |
| mlxplat_default_channels[i - 1][MLXPLAT_CPLD_GRP_CHNL_NUM - 1]; |
| mlxplat_led = &mlxplat_default_led_data; |
| mlxplat_regs_io = &mlxplat_default_regs_io_data; |
| |
| return 1; |
| }; |
| |
| static int __init mlxplat_dmi_msn21xx_matched(const struct dmi_system_id *dmi) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) { |
| mlxplat_mux_data[i].values = mlxplat_msn21xx_channels; |
| mlxplat_mux_data[i].n_values = |
| ARRAY_SIZE(mlxplat_msn21xx_channels); |
| } |
| mlxplat_hotplug = &mlxplat_mlxcpld_msn21xx_data; |
| mlxplat_hotplug->deferred_nr = |
| mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1]; |
| mlxplat_led = &mlxplat_msn21xx_led_data; |
| mlxplat_regs_io = &mlxplat_msn21xx_regs_io_data; |
| |
| return 1; |
| }; |
| |
| static int __init mlxplat_dmi_msn274x_matched(const struct dmi_system_id *dmi) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) { |
| mlxplat_mux_data[i].values = mlxplat_msn21xx_channels; |
| mlxplat_mux_data[i].n_values = |
| ARRAY_SIZE(mlxplat_msn21xx_channels); |
| } |
| mlxplat_hotplug = &mlxplat_mlxcpld_msn274x_data; |
| mlxplat_hotplug->deferred_nr = |
| mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1]; |
| mlxplat_led = &mlxplat_default_led_data; |
| mlxplat_regs_io = &mlxplat_msn21xx_regs_io_data; |
| |
| return 1; |
| }; |
| |
| static int __init mlxplat_dmi_msn201x_matched(const struct dmi_system_id *dmi) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) { |
| mlxplat_mux_data[i].values = mlxplat_msn21xx_channels; |
| mlxplat_mux_data[i].n_values = |
| ARRAY_SIZE(mlxplat_msn21xx_channels); |
| } |
| mlxplat_hotplug = &mlxplat_mlxcpld_msn201x_data; |
| mlxplat_hotplug->deferred_nr = |
| mlxplat_default_channels[i - 1][MLXPLAT_CPLD_GRP_CHNL_NUM - 1]; |
| mlxplat_led = &mlxplat_default_ng_led_data; |
| mlxplat_regs_io = &mlxplat_msn21xx_regs_io_data; |
| |
| return 1; |
| }; |
| |
| static int __init mlxplat_dmi_qmb7xx_matched(const struct dmi_system_id *dmi) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) { |
| mlxplat_mux_data[i].values = mlxplat_msn21xx_channels; |
| mlxplat_mux_data[i].n_values = |
| ARRAY_SIZE(mlxplat_msn21xx_channels); |
| } |
| mlxplat_hotplug = &mlxplat_mlxcpld_default_ng_data; |
| mlxplat_hotplug->deferred_nr = |
| mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1]; |
| mlxplat_led = &mlxplat_msn21xx_led_data; |
| mlxplat_fan = &mlxplat_default_fan_data; |
| |
| return 1; |
| }; |
| |
| static const struct dmi_system_id mlxplat_dmi_table[] __initconst = { |
| { |
| .callback = mlxplat_dmi_msn274x_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MSN274"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_default_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MSN24"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_default_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MSN27"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_default_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MSB"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_default_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MSX"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_msn21xx_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MSN21"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_msn201x_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MSN201"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_qmb7xx_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "QMB7"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_qmb7xx_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "SN37"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_qmb7xx_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "SN34"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_default_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_NAME, "VMOD0001"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_msn21xx_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_NAME, "VMOD0002"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_msn274x_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_NAME, "VMOD0003"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_msn201x_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_NAME, "VMOD0004"), |
| }, |
| }, |
| { |
| .callback = mlxplat_dmi_qmb7xx_matched, |
| .matches = { |
| DMI_MATCH(DMI_BOARD_NAME, "VMOD0005"), |
| }, |
| }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(dmi, mlxplat_dmi_table); |
| |
| static int mlxplat_mlxcpld_verify_bus_topology(int *nr) |
| { |
| struct i2c_adapter *search_adap; |
| int shift, i; |
| |
| /* Scan adapters from expected id to verify it is free. */ |
| *nr = MLXPLAT_CPLD_PHYS_ADAPTER_DEF_NR; |
| for (i = MLXPLAT_CPLD_PHYS_ADAPTER_DEF_NR; i < |
| MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM; i++) { |
| search_adap = i2c_get_adapter(i); |
| if (search_adap) { |
| i2c_put_adapter(search_adap); |
| continue; |
| } |
| |
| /* Return if expected parent adapter is free. */ |
| if (i == MLXPLAT_CPLD_PHYS_ADAPTER_DEF_NR) |
| return 0; |
| break; |
| } |
| |
| /* Return with error if free id for adapter is not found. */ |
| if (i == MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM) |
| return -ENODEV; |
| |
| /* Shift adapter ids, since expected parent adapter is not free. */ |
| *nr = i; |
| for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) { |
| shift = *nr - mlxplat_mux_data[i].parent; |
| mlxplat_mux_data[i].parent = *nr; |
| mlxplat_mux_data[i].base_nr += shift; |
| if (shift > 0) |
| mlxplat_hotplug->shift_nr = shift; |
| } |
| |
| return 0; |
| } |
| |
| static int __init mlxplat_init(void) |
| { |
| struct mlxplat_priv *priv; |
| int i, j, nr, err; |
| |
| if (!dmi_check_system(mlxplat_dmi_table)) |
| return -ENODEV; |
| |
| mlxplat_dev = platform_device_register_simple(MLX_PLAT_DEVICE_NAME, -1, |
| mlxplat_lpc_resources, |
| ARRAY_SIZE(mlxplat_lpc_resources)); |
| |
| if (IS_ERR(mlxplat_dev)) |
| return PTR_ERR(mlxplat_dev); |
| |
| priv = devm_kzalloc(&mlxplat_dev->dev, sizeof(struct mlxplat_priv), |
| GFP_KERNEL); |
| if (!priv) { |
| err = -ENOMEM; |
| goto fail_alloc; |
| } |
| platform_set_drvdata(mlxplat_dev, priv); |
| |
| err = mlxplat_mlxcpld_verify_bus_topology(&nr); |
| if (nr < 0) |
| goto fail_alloc; |
| |
| nr = (nr == MLXPLAT_CPLD_MAX_PHYS_ADAPTER_NUM) ? -1 : nr; |
| priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", nr, |
| NULL, 0); |
| if (IS_ERR(priv->pdev_i2c)) { |
| err = PTR_ERR(priv->pdev_i2c); |
| goto fail_alloc; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) { |
| priv->pdev_mux[i] = platform_device_register_resndata( |
| &mlxplat_dev->dev, |
| "i2c-mux-reg", i, NULL, |
| 0, &mlxplat_mux_data[i], |
| sizeof(mlxplat_mux_data[i])); |
| if (IS_ERR(priv->pdev_mux[i])) { |
| err = PTR_ERR(priv->pdev_mux[i]); |
| goto fail_platform_mux_register; |
| } |
| } |
| |
| mlxplat_mlxcpld_regmap_ctx.base = devm_ioport_map(&mlxplat_dev->dev, |
| mlxplat_lpc_resources[1].start, 1); |
| if (!mlxplat_mlxcpld_regmap_ctx.base) { |
| err = -ENOMEM; |
| goto fail_platform_mux_register; |
| } |
| |
| mlxplat_hotplug->regmap = devm_regmap_init(&mlxplat_dev->dev, NULL, |
| &mlxplat_mlxcpld_regmap_ctx, |
| &mlxplat_mlxcpld_regmap_config); |
| if (IS_ERR(mlxplat_hotplug->regmap)) { |
| err = PTR_ERR(mlxplat_hotplug->regmap); |
| goto fail_platform_mux_register; |
| } |
| |
| priv->pdev_hotplug = platform_device_register_resndata( |
| &mlxplat_dev->dev, "mlxreg-hotplug", |
| PLATFORM_DEVID_NONE, |
| mlxplat_mlxcpld_resources, |
| ARRAY_SIZE(mlxplat_mlxcpld_resources), |
| mlxplat_hotplug, sizeof(*mlxplat_hotplug)); |
| if (IS_ERR(priv->pdev_hotplug)) { |
| err = PTR_ERR(priv->pdev_hotplug); |
| goto fail_platform_mux_register; |
| } |
| |
| /* Set default registers. */ |
| for (j = 0; j < mlxplat_mlxcpld_regmap_config.num_reg_defaults; j++) { |
| err = regmap_write(mlxplat_hotplug->regmap, |
| mlxplat_mlxcpld_regmap_default[j].reg, |
| mlxplat_mlxcpld_regmap_default[j].def); |
| if (err) |
| goto fail_platform_mux_register; |
| } |
| |
| /* Add LED driver. */ |
| mlxplat_led->regmap = mlxplat_hotplug->regmap; |
| priv->pdev_led = platform_device_register_resndata( |
| &mlxplat_dev->dev, "leds-mlxreg", |
| PLATFORM_DEVID_NONE, NULL, 0, |
| mlxplat_led, sizeof(*mlxplat_led)); |
| if (IS_ERR(priv->pdev_led)) { |
| err = PTR_ERR(priv->pdev_led); |
| goto fail_platform_hotplug_register; |
| } |
| |
| /* Add registers io access driver. */ |
| if (mlxplat_regs_io) { |
| mlxplat_regs_io->regmap = mlxplat_hotplug->regmap; |
| priv->pdev_io_regs = platform_device_register_resndata( |
| &mlxplat_dev->dev, "mlxreg-io", |
| PLATFORM_DEVID_NONE, NULL, 0, |
| mlxplat_regs_io, |
| sizeof(*mlxplat_regs_io)); |
| if (IS_ERR(priv->pdev_io_regs)) { |
| err = PTR_ERR(priv->pdev_io_regs); |
| goto fail_platform_led_register; |
| } |
| } |
| |
| /* Add FAN driver. */ |
| if (mlxplat_fan) { |
| mlxplat_fan->regmap = mlxplat_hotplug->regmap; |
| priv->pdev_fan = platform_device_register_resndata( |
| &mlxplat_dev->dev, "mlxreg-fan", |
| PLATFORM_DEVID_NONE, NULL, 0, |
| mlxplat_fan, |
| sizeof(*mlxplat_fan)); |
| if (IS_ERR(priv->pdev_fan)) { |
| err = PTR_ERR(priv->pdev_fan); |
| goto fail_platform_io_regs_register; |
| } |
| } |
| |
| /* Sync registers with hardware. */ |
| regcache_mark_dirty(mlxplat_hotplug->regmap); |
| err = regcache_sync(mlxplat_hotplug->regmap); |
| if (err) |
| goto fail_platform_fan_register; |
| |
| return 0; |
| |
| fail_platform_fan_register: |
| if (mlxplat_fan) |
| platform_device_unregister(priv->pdev_fan); |
| fail_platform_io_regs_register: |
| if (mlxplat_regs_io) |
| platform_device_unregister(priv->pdev_io_regs); |
| fail_platform_led_register: |
| platform_device_unregister(priv->pdev_led); |
| fail_platform_hotplug_register: |
| platform_device_unregister(priv->pdev_hotplug); |
| fail_platform_mux_register: |
| while (--i >= 0) |
| platform_device_unregister(priv->pdev_mux[i]); |
| platform_device_unregister(priv->pdev_i2c); |
| fail_alloc: |
| platform_device_unregister(mlxplat_dev); |
| |
| return err; |
| } |
| module_init(mlxplat_init); |
| |
| static void __exit mlxplat_exit(void) |
| { |
| struct mlxplat_priv *priv = platform_get_drvdata(mlxplat_dev); |
| int i; |
| |
| if (priv->pdev_fan) |
| platform_device_unregister(priv->pdev_fan); |
| if (priv->pdev_io_regs) |
| platform_device_unregister(priv->pdev_io_regs); |
| platform_device_unregister(priv->pdev_led); |
| platform_device_unregister(priv->pdev_hotplug); |
| |
| for (i = ARRAY_SIZE(mlxplat_mux_data) - 1; i >= 0 ; i--) |
| platform_device_unregister(priv->pdev_mux[i]); |
| |
| platform_device_unregister(priv->pdev_i2c); |
| platform_device_unregister(mlxplat_dev); |
| } |
| module_exit(mlxplat_exit); |
| |
| MODULE_AUTHOR("Vadim Pasternak (vadimp@mellanox.com)"); |
| MODULE_DESCRIPTION("Mellanox platform driver"); |
| MODULE_LICENSE("Dual BSD/GPL"); |