| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Mediatek DSA Tag support |
| * Copyright (C) 2017 Landen Chao <landen.chao@mediatek.com> |
| * Sean Wang <sean.wang@mediatek.com> |
| */ |
| |
| #include <linux/etherdevice.h> |
| #include <linux/if_vlan.h> |
| |
| #include "dsa_priv.h" |
| |
| #define MTK_HDR_LEN 4 |
| #define MTK_HDR_XMIT_UNTAGGED 0 |
| #define MTK_HDR_XMIT_TAGGED_TPID_8100 1 |
| #define MTK_HDR_XMIT_TAGGED_TPID_88A8 2 |
| #define MTK_HDR_RECV_SOURCE_PORT_MASK GENMASK(2, 0) |
| #define MTK_HDR_XMIT_DP_BIT_MASK GENMASK(5, 0) |
| #define MTK_HDR_XMIT_SA_DIS BIT(6) |
| |
| static struct sk_buff *mtk_tag_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct dsa_port *dp = dsa_slave_to_port(dev); |
| u8 xmit_tpid; |
| u8 *mtk_tag; |
| |
| /* Build the special tag after the MAC Source Address. If VLAN header |
| * is present, it's required that VLAN header and special tag is |
| * being combined. Only in this way we can allow the switch can parse |
| * the both special and VLAN tag at the same time and then look up VLAN |
| * table with VID. |
| */ |
| switch (skb->protocol) { |
| case htons(ETH_P_8021Q): |
| xmit_tpid = MTK_HDR_XMIT_TAGGED_TPID_8100; |
| break; |
| case htons(ETH_P_8021AD): |
| xmit_tpid = MTK_HDR_XMIT_TAGGED_TPID_88A8; |
| break; |
| default: |
| xmit_tpid = MTK_HDR_XMIT_UNTAGGED; |
| skb_push(skb, MTK_HDR_LEN); |
| dsa_alloc_etype_header(skb, MTK_HDR_LEN); |
| } |
| |
| mtk_tag = dsa_etype_header_pos_tx(skb); |
| |
| /* Mark tag attribute on special tag insertion to notify hardware |
| * whether that's a combined special tag with 802.1Q header. |
| */ |
| mtk_tag[0] = xmit_tpid; |
| mtk_tag[1] = (1 << dp->index) & MTK_HDR_XMIT_DP_BIT_MASK; |
| |
| /* Tag control information is kept for 802.1Q */ |
| if (xmit_tpid == MTK_HDR_XMIT_UNTAGGED) { |
| mtk_tag[2] = 0; |
| mtk_tag[3] = 0; |
| } |
| |
| return skb; |
| } |
| |
| static struct sk_buff *mtk_tag_rcv(struct sk_buff *skb, struct net_device *dev) |
| { |
| u16 hdr; |
| int port; |
| __be16 *phdr; |
| |
| if (unlikely(!pskb_may_pull(skb, MTK_HDR_LEN))) |
| return NULL; |
| |
| phdr = dsa_etype_header_pos_rx(skb); |
| hdr = ntohs(*phdr); |
| |
| /* Remove MTK tag and recalculate checksum. */ |
| skb_pull_rcsum(skb, MTK_HDR_LEN); |
| |
| dsa_strip_etype_header(skb, MTK_HDR_LEN); |
| |
| /* Get source port information */ |
| port = (hdr & MTK_HDR_RECV_SOURCE_PORT_MASK); |
| |
| skb->dev = dsa_master_find_slave(dev, 0, port); |
| if (!skb->dev) |
| return NULL; |
| |
| dsa_default_offload_fwd_mark(skb); |
| |
| return skb; |
| } |
| |
| static const struct dsa_device_ops mtk_netdev_ops = { |
| .name = "mtk", |
| .proto = DSA_TAG_PROTO_MTK, |
| .xmit = mtk_tag_xmit, |
| .rcv = mtk_tag_rcv, |
| .needed_headroom = MTK_HDR_LEN, |
| }; |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_MTK); |
| |
| module_dsa_tag_driver(mtk_netdev_ops); |