| /* |
| * rcar_du_crtc.c -- R-Car Display Unit CRTCs |
| * |
| * Copyright (C) 2013 Renesas Corporation |
| * |
| * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/mutex.h> |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| |
| #include "rcar_du_crtc.h" |
| #include "rcar_du_drv.h" |
| #include "rcar_du_kms.h" |
| #include "rcar_du_plane.h" |
| #include "rcar_du_regs.h" |
| |
| static u32 rcar_du_crtc_read(struct rcar_du_crtc *rcrtc, u32 reg) |
| { |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| |
| return rcar_du_read(rcdu, rcrtc->mmio_offset + reg); |
| } |
| |
| static void rcar_du_crtc_write(struct rcar_du_crtc *rcrtc, u32 reg, u32 data) |
| { |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| |
| rcar_du_write(rcdu, rcrtc->mmio_offset + reg, data); |
| } |
| |
| static void rcar_du_crtc_clr(struct rcar_du_crtc *rcrtc, u32 reg, u32 clr) |
| { |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| |
| rcar_du_write(rcdu, rcrtc->mmio_offset + reg, |
| rcar_du_read(rcdu, rcrtc->mmio_offset + reg) & ~clr); |
| } |
| |
| static void rcar_du_crtc_set(struct rcar_du_crtc *rcrtc, u32 reg, u32 set) |
| { |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| |
| rcar_du_write(rcdu, rcrtc->mmio_offset + reg, |
| rcar_du_read(rcdu, rcrtc->mmio_offset + reg) | set); |
| } |
| |
| static void rcar_du_crtc_clr_set(struct rcar_du_crtc *rcrtc, u32 reg, |
| u32 clr, u32 set) |
| { |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| u32 value = rcar_du_read(rcdu, rcrtc->mmio_offset + reg); |
| |
| rcar_du_write(rcdu, rcrtc->mmio_offset + reg, (value & ~clr) | set); |
| } |
| |
| static int rcar_du_crtc_get(struct rcar_du_crtc *rcrtc) |
| { |
| int ret; |
| |
| ret = clk_prepare_enable(rcrtc->clock); |
| if (ret < 0) |
| return ret; |
| |
| ret = rcar_du_group_get(rcrtc->group); |
| if (ret < 0) |
| clk_disable_unprepare(rcrtc->clock); |
| |
| return ret; |
| } |
| |
| static void rcar_du_crtc_put(struct rcar_du_crtc *rcrtc) |
| { |
| rcar_du_group_put(rcrtc->group); |
| clk_disable_unprepare(rcrtc->clock); |
| } |
| |
| static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc) |
| { |
| const struct drm_display_mode *mode = &rcrtc->crtc.mode; |
| unsigned long clk; |
| u32 value; |
| u32 div; |
| |
| /* Dot clock */ |
| clk = clk_get_rate(rcrtc->clock); |
| div = DIV_ROUND_CLOSEST(clk, mode->clock * 1000); |
| div = clamp(div, 1U, 64U) - 1; |
| |
| rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? ESCR2 : ESCR, |
| ESCR_DCLKSEL_CLKS | div); |
| rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? OTAR2 : OTAR, 0); |
| |
| /* Signal polarities */ |
| value = ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : DSMR_VSL) |
| | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? 0 : DSMR_HSL) |
| | DSMR_DIPM_DE; |
| rcar_du_crtc_write(rcrtc, DSMR, value); |
| |
| /* Display timings */ |
| rcar_du_crtc_write(rcrtc, HDSR, mode->htotal - mode->hsync_start - 19); |
| rcar_du_crtc_write(rcrtc, HDER, mode->htotal - mode->hsync_start + |
| mode->hdisplay - 19); |
| rcar_du_crtc_write(rcrtc, HSWR, mode->hsync_end - |
| mode->hsync_start - 1); |
| rcar_du_crtc_write(rcrtc, HCR, mode->htotal - 1); |
| |
| rcar_du_crtc_write(rcrtc, VDSR, mode->vtotal - mode->vsync_end - 2); |
| rcar_du_crtc_write(rcrtc, VDER, mode->vtotal - mode->vsync_end + |
| mode->vdisplay - 2); |
| rcar_du_crtc_write(rcrtc, VSPR, mode->vtotal - mode->vsync_end + |
| mode->vsync_start - 1); |
| rcar_du_crtc_write(rcrtc, VCR, mode->vtotal - 1); |
| |
| rcar_du_crtc_write(rcrtc, DESR, mode->htotal - mode->hsync_start); |
| rcar_du_crtc_write(rcrtc, DEWR, mode->hdisplay); |
| } |
| |
| void rcar_du_crtc_route_output(struct drm_crtc *crtc, |
| enum rcar_du_output output) |
| { |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| |
| /* Store the route from the CRTC output to the DU output. The DU will be |
| * configured when starting the CRTC. |
| */ |
| rcrtc->outputs |= BIT(output); |
| |
| /* Store RGB routing to DPAD0 for R8A7790. */ |
| if (rcar_du_has(rcdu, RCAR_DU_FEATURE_DEFR8) && |
| output == RCAR_DU_OUTPUT_DPAD0) |
| rcdu->dpad0_source = rcrtc->index; |
| } |
| |
| void rcar_du_crtc_update_planes(struct drm_crtc *crtc) |
| { |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| struct rcar_du_plane *planes[RCAR_DU_NUM_HW_PLANES]; |
| unsigned int num_planes = 0; |
| unsigned int prio = 0; |
| unsigned int i; |
| u32 dptsr = 0; |
| u32 dspr = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(rcrtc->group->planes.planes); ++i) { |
| struct rcar_du_plane *plane = &rcrtc->group->planes.planes[i]; |
| unsigned int j; |
| |
| if (plane->crtc != &rcrtc->crtc || !plane->enabled) |
| continue; |
| |
| /* Insert the plane in the sorted planes array. */ |
| for (j = num_planes++; j > 0; --j) { |
| if (planes[j-1]->zpos <= plane->zpos) |
| break; |
| planes[j] = planes[j-1]; |
| } |
| |
| planes[j] = plane; |
| prio += plane->format->planes * 4; |
| } |
| |
| for (i = 0; i < num_planes; ++i) { |
| struct rcar_du_plane *plane = planes[i]; |
| unsigned int index = plane->hwindex; |
| |
| prio -= 4; |
| dspr |= (index + 1) << prio; |
| dptsr |= DPTSR_PnDK(index) | DPTSR_PnTS(index); |
| |
| if (plane->format->planes == 2) { |
| index = (index + 1) % 8; |
| |
| prio -= 4; |
| dspr |= (index + 1) << prio; |
| dptsr |= DPTSR_PnDK(index) | DPTSR_PnTS(index); |
| } |
| } |
| |
| /* Select display timing and dot clock generator 2 for planes associated |
| * with superposition controller 2. |
| */ |
| if (rcrtc->index % 2) { |
| u32 value = rcar_du_group_read(rcrtc->group, DPTSR); |
| |
| /* The DPTSR register is updated when the display controller is |
| * stopped. We thus need to restart the DU. Once again, sorry |
| * for the flicker. One way to mitigate the issue would be to |
| * pre-associate planes with CRTCs (either with a fixed 4/4 |
| * split, or through a module parameter). Flicker would then |
| * occur only if we need to break the pre-association. |
| */ |
| if (value != dptsr) { |
| rcar_du_group_write(rcrtc->group, DPTSR, dptsr); |
| if (rcrtc->group->used_crtcs) |
| rcar_du_group_restart(rcrtc->group); |
| } |
| } |
| |
| rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, |
| dspr); |
| } |
| |
| static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc) |
| { |
| struct drm_crtc *crtc = &rcrtc->crtc; |
| unsigned int i; |
| |
| if (rcrtc->started) |
| return; |
| |
| if (WARN_ON(rcrtc->plane->format == NULL)) |
| return; |
| |
| /* Set display off and background to black */ |
| rcar_du_crtc_write(rcrtc, DOOR, DOOR_RGB(0, 0, 0)); |
| rcar_du_crtc_write(rcrtc, BPOR, BPOR_RGB(0, 0, 0)); |
| |
| /* Configure display timings and output routing */ |
| rcar_du_crtc_set_display_timing(rcrtc); |
| rcar_du_group_set_routing(rcrtc->group); |
| |
| mutex_lock(&rcrtc->group->planes.lock); |
| rcrtc->plane->enabled = true; |
| rcar_du_crtc_update_planes(crtc); |
| mutex_unlock(&rcrtc->group->planes.lock); |
| |
| /* Setup planes. */ |
| for (i = 0; i < ARRAY_SIZE(rcrtc->group->planes.planes); ++i) { |
| struct rcar_du_plane *plane = &rcrtc->group->planes.planes[i]; |
| |
| if (plane->crtc != crtc || !plane->enabled) |
| continue; |
| |
| rcar_du_plane_setup(plane); |
| } |
| |
| /* Select master sync mode. This enables display operation in master |
| * sync mode (with the HSYNC and VSYNC signals configured as outputs and |
| * actively driven). |
| */ |
| rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK, DSYSR_TVM_MASTER); |
| |
| rcar_du_group_start_stop(rcrtc->group, true); |
| |
| rcrtc->started = true; |
| } |
| |
| static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc) |
| { |
| struct drm_crtc *crtc = &rcrtc->crtc; |
| |
| if (!rcrtc->started) |
| return; |
| |
| mutex_lock(&rcrtc->group->planes.lock); |
| rcrtc->plane->enabled = false; |
| rcar_du_crtc_update_planes(crtc); |
| mutex_unlock(&rcrtc->group->planes.lock); |
| |
| /* Select switch sync mode. This stops display operation and configures |
| * the HSYNC and VSYNC signals as inputs. |
| */ |
| rcar_du_crtc_clr_set(rcrtc, DSYSR, DSYSR_TVM_MASK, DSYSR_TVM_SWITCH); |
| |
| rcar_du_group_start_stop(rcrtc->group, false); |
| |
| rcrtc->started = false; |
| } |
| |
| void rcar_du_crtc_suspend(struct rcar_du_crtc *rcrtc) |
| { |
| rcar_du_crtc_stop(rcrtc); |
| rcar_du_crtc_put(rcrtc); |
| } |
| |
| void rcar_du_crtc_resume(struct rcar_du_crtc *rcrtc) |
| { |
| if (rcrtc->dpms != DRM_MODE_DPMS_ON) |
| return; |
| |
| rcar_du_crtc_get(rcrtc); |
| rcar_du_crtc_start(rcrtc); |
| } |
| |
| static void rcar_du_crtc_update_base(struct rcar_du_crtc *rcrtc) |
| { |
| struct drm_crtc *crtc = &rcrtc->crtc; |
| |
| rcar_du_plane_compute_base(rcrtc->plane, crtc->fb); |
| rcar_du_plane_update_base(rcrtc->plane); |
| } |
| |
| static void rcar_du_crtc_dpms(struct drm_crtc *crtc, int mode) |
| { |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| |
| if (rcrtc->dpms == mode) |
| return; |
| |
| if (mode == DRM_MODE_DPMS_ON) { |
| rcar_du_crtc_get(rcrtc); |
| rcar_du_crtc_start(rcrtc); |
| } else { |
| rcar_du_crtc_stop(rcrtc); |
| rcar_du_crtc_put(rcrtc); |
| } |
| |
| rcrtc->dpms = mode; |
| } |
| |
| static bool rcar_du_crtc_mode_fixup(struct drm_crtc *crtc, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| /* TODO Fixup modes */ |
| return true; |
| } |
| |
| static void rcar_du_crtc_mode_prepare(struct drm_crtc *crtc) |
| { |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| |
| /* We need to access the hardware during mode set, acquire a reference |
| * to the CRTC. |
| */ |
| rcar_du_crtc_get(rcrtc); |
| |
| /* Stop the CRTC and release the plane. Force the DPMS mode to off as a |
| * result. |
| */ |
| rcar_du_crtc_stop(rcrtc); |
| rcar_du_plane_release(rcrtc->plane); |
| |
| rcrtc->dpms = DRM_MODE_DPMS_OFF; |
| } |
| |
| static int rcar_du_crtc_mode_set(struct drm_crtc *crtc, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode, |
| int x, int y, |
| struct drm_framebuffer *old_fb) |
| { |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| struct rcar_du_device *rcdu = rcrtc->group->dev; |
| const struct rcar_du_format_info *format; |
| int ret; |
| |
| format = rcar_du_format_info(crtc->fb->pixel_format); |
| if (format == NULL) { |
| dev_dbg(rcdu->dev, "mode_set: unsupported format %08x\n", |
| crtc->fb->pixel_format); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| ret = rcar_du_plane_reserve(rcrtc->plane, format); |
| if (ret < 0) |
| goto error; |
| |
| rcrtc->plane->format = format; |
| |
| rcrtc->plane->src_x = x; |
| rcrtc->plane->src_y = y; |
| rcrtc->plane->width = mode->hdisplay; |
| rcrtc->plane->height = mode->vdisplay; |
| |
| rcar_du_plane_compute_base(rcrtc->plane, crtc->fb); |
| |
| rcrtc->outputs = 0; |
| |
| return 0; |
| |
| error: |
| /* There's no rollback/abort operation to clean up in case of error. We |
| * thus need to release the reference to the CRTC acquired in prepare() |
| * here. |
| */ |
| rcar_du_crtc_put(rcrtc); |
| return ret; |
| } |
| |
| static void rcar_du_crtc_mode_commit(struct drm_crtc *crtc) |
| { |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| |
| /* We're done, restart the CRTC and set the DPMS mode to on. The |
| * reference to the DU acquired at prepare() time will thus be released |
| * by the DPMS handler (possibly called by the disable() handler). |
| */ |
| rcar_du_crtc_start(rcrtc); |
| rcrtc->dpms = DRM_MODE_DPMS_ON; |
| } |
| |
| static int rcar_du_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, |
| struct drm_framebuffer *old_fb) |
| { |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| |
| rcrtc->plane->src_x = x; |
| rcrtc->plane->src_y = y; |
| |
| rcar_du_crtc_update_base(rcrtc); |
| |
| return 0; |
| } |
| |
| static void rcar_du_crtc_disable(struct drm_crtc *crtc) |
| { |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| |
| rcar_du_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); |
| rcar_du_plane_release(rcrtc->plane); |
| } |
| |
| static const struct drm_crtc_helper_funcs crtc_helper_funcs = { |
| .dpms = rcar_du_crtc_dpms, |
| .mode_fixup = rcar_du_crtc_mode_fixup, |
| .prepare = rcar_du_crtc_mode_prepare, |
| .commit = rcar_du_crtc_mode_commit, |
| .mode_set = rcar_du_crtc_mode_set, |
| .mode_set_base = rcar_du_crtc_mode_set_base, |
| .disable = rcar_du_crtc_disable, |
| }; |
| |
| void rcar_du_crtc_cancel_page_flip(struct rcar_du_crtc *rcrtc, |
| struct drm_file *file) |
| { |
| struct drm_pending_vblank_event *event; |
| struct drm_device *dev = rcrtc->crtc.dev; |
| unsigned long flags; |
| |
| /* Destroy the pending vertical blanking event associated with the |
| * pending page flip, if any, and disable vertical blanking interrupts. |
| */ |
| spin_lock_irqsave(&dev->event_lock, flags); |
| event = rcrtc->event; |
| if (event && event->base.file_priv == file) { |
| rcrtc->event = NULL; |
| event->base.destroy(&event->base); |
| drm_vblank_put(dev, rcrtc->index); |
| } |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| } |
| |
| static void rcar_du_crtc_finish_page_flip(struct rcar_du_crtc *rcrtc) |
| { |
| struct drm_pending_vblank_event *event; |
| struct drm_device *dev = rcrtc->crtc.dev; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->event_lock, flags); |
| event = rcrtc->event; |
| rcrtc->event = NULL; |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| |
| if (event == NULL) |
| return; |
| |
| spin_lock_irqsave(&dev->event_lock, flags); |
| drm_send_vblank_event(dev, rcrtc->index, event); |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| |
| drm_vblank_put(dev, rcrtc->index); |
| } |
| |
| static irqreturn_t rcar_du_crtc_irq(int irq, void *arg) |
| { |
| struct rcar_du_crtc *rcrtc = arg; |
| irqreturn_t ret = IRQ_NONE; |
| u32 status; |
| |
| status = rcar_du_crtc_read(rcrtc, DSSR); |
| rcar_du_crtc_write(rcrtc, DSRCR, status & DSRCR_MASK); |
| |
| if (status & DSSR_VBK) { |
| drm_handle_vblank(rcrtc->crtc.dev, rcrtc->index); |
| rcar_du_crtc_finish_page_flip(rcrtc); |
| ret = IRQ_HANDLED; |
| } |
| |
| return ret; |
| } |
| |
| static int rcar_du_crtc_page_flip(struct drm_crtc *crtc, |
| struct drm_framebuffer *fb, |
| struct drm_pending_vblank_event *event, |
| uint32_t page_flip_flags) |
| { |
| struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); |
| struct drm_device *dev = rcrtc->crtc.dev; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->event_lock, flags); |
| if (rcrtc->event != NULL) { |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| return -EBUSY; |
| } |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| |
| crtc->fb = fb; |
| rcar_du_crtc_update_base(rcrtc); |
| |
| if (event) { |
| event->pipe = rcrtc->index; |
| drm_vblank_get(dev, rcrtc->index); |
| spin_lock_irqsave(&dev->event_lock, flags); |
| rcrtc->event = event; |
| spin_unlock_irqrestore(&dev->event_lock, flags); |
| } |
| |
| return 0; |
| } |
| |
| static const struct drm_crtc_funcs crtc_funcs = { |
| .destroy = drm_crtc_cleanup, |
| .set_config = drm_crtc_helper_set_config, |
| .page_flip = rcar_du_crtc_page_flip, |
| }; |
| |
| int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int index) |
| { |
| static const unsigned int mmio_offsets[] = { |
| DU0_REG_OFFSET, DU1_REG_OFFSET, DU2_REG_OFFSET |
| }; |
| |
| struct rcar_du_device *rcdu = rgrp->dev; |
| struct platform_device *pdev = to_platform_device(rcdu->dev); |
| struct rcar_du_crtc *rcrtc = &rcdu->crtcs[index]; |
| struct drm_crtc *crtc = &rcrtc->crtc; |
| unsigned int irqflags; |
| char clk_name[5]; |
| char *name; |
| int irq; |
| int ret; |
| |
| /* Get the CRTC clock. */ |
| if (rcar_du_has(rcdu, RCAR_DU_FEATURE_CRTC_IRQ_CLOCK)) { |
| sprintf(clk_name, "du.%u", index); |
| name = clk_name; |
| } else { |
| name = NULL; |
| } |
| |
| rcrtc->clock = devm_clk_get(rcdu->dev, name); |
| if (IS_ERR(rcrtc->clock)) { |
| dev_err(rcdu->dev, "no clock for CRTC %u\n", index); |
| return PTR_ERR(rcrtc->clock); |
| } |
| |
| rcrtc->group = rgrp; |
| rcrtc->mmio_offset = mmio_offsets[index]; |
| rcrtc->index = index; |
| rcrtc->dpms = DRM_MODE_DPMS_OFF; |
| rcrtc->plane = &rgrp->planes.planes[index % 2]; |
| |
| rcrtc->plane->crtc = crtc; |
| |
| ret = drm_crtc_init(rcdu->ddev, crtc, &crtc_funcs); |
| if (ret < 0) |
| return ret; |
| |
| drm_crtc_helper_add(crtc, &crtc_helper_funcs); |
| |
| /* Register the interrupt handler. */ |
| if (rcar_du_has(rcdu, RCAR_DU_FEATURE_CRTC_IRQ_CLOCK)) { |
| irq = platform_get_irq(pdev, index); |
| irqflags = 0; |
| } else { |
| irq = platform_get_irq(pdev, 0); |
| irqflags = IRQF_SHARED; |
| } |
| |
| if (irq < 0) { |
| dev_err(rcdu->dev, "no IRQ for CRTC %u\n", index); |
| return ret; |
| } |
| |
| ret = devm_request_irq(rcdu->dev, irq, rcar_du_crtc_irq, irqflags, |
| dev_name(rcdu->dev), rcrtc); |
| if (ret < 0) { |
| dev_err(rcdu->dev, |
| "failed to register IRQ for CRTC %u\n", index); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| void rcar_du_crtc_enable_vblank(struct rcar_du_crtc *rcrtc, bool enable) |
| { |
| if (enable) { |
| rcar_du_crtc_write(rcrtc, DSRCR, DSRCR_VBCL); |
| rcar_du_crtc_set(rcrtc, DIER, DIER_VBE); |
| } else { |
| rcar_du_crtc_clr(rcrtc, DIER, DIER_VBE); |
| } |
| } |