blob: 634da24ec3ed097c07ba02b277f4994bc3764f35 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/qcom,pcie-sc7280.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SC7280 PCI Express Root Complex
maintainers:
- Bjorn Andersson <andersson@kernel.org>
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
description:
Qualcomm SC7280 SoC PCIe root complex controller is based on the Synopsys
DesignWare PCIe IP.
properties:
compatible:
const: qcom,pcie-sc7280
reg:
minItems: 5
maxItems: 6
reg-names:
minItems: 5
items:
- const: parf # Qualcomm specific registers
- const: dbi # DesignWare PCIe registers
- const: elbi # External local bus interface registers
- const: atu # ATU address space
- const: config # PCIe configuration space
- const: mhi # MHI registers
clocks:
minItems: 13
maxItems: 13
clock-names:
items:
- const: pipe # PIPE clock
- const: pipe_mux # PIPE MUX
- const: phy_pipe # PIPE output clock
- const: ref # REFERENCE clock
- const: aux # Auxiliary clock
- const: cfg # Configuration clock
- const: bus_master # Master AXI clock
- const: bus_slave # Slave AXI clock
- const: slave_q2a # Slave Q2A clock
- const: tbu # PCIe TBU clock
- const: ddrss_sf_tbu # PCIe SF TBU clock
- const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
- const: aggre1 # Aggre NoC PCIe1 AXI clock
interrupts:
maxItems: 1
interrupt-names:
items:
- const: msi
resets:
maxItems: 1
reset-names:
items:
- const: pci
vddpe-3v3-supply:
description: PCIe endpoint power supply
allOf:
- $ref: qcom,pcie-common.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sc7280.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
pcie@1c08000 {
compatible = "qcom,pcie-sc7280";
reg = <0 0x01c08000 0 0x3000>,
<0 0x40000000 0 0xf1d>,
<0 0x40000f20 0 0xa8>,
<0 0x40001000 0 0x1000>,
<0 0x40100000 0 0x100000>;
reg-names = "parf", "dbi", "elbi", "atu", "config";
ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
bus-range = <0x00 0xff>;
device_type = "pci";
linux,pci-domain = <1>;
num-lanes = <2>;
#address-cells = <3>;
#size-cells = <2>;
assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
assigned-clock-rates = <19200000>;
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
<&pcie1_phy>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_1_SLV_AXI_CLK>,
<&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
<&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
<&gcc GCC_DDRSS_PCIE_SF_CLK>,
<&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
<&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
clock-names = "pipe",
"pipe_mux",
"phy_pipe",
"ref",
"aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a",
"tbu",
"ddrss_sf_tbu",
"aggre0",
"aggre1";
dma-coherent;
interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
<0x100 &apps_smmu 0x1c81 0x1>;
phys = <&pcie1_phy>;
phy-names = "pciephy";
pinctrl-names = "default";
pinctrl-0 = <&pcie1_clkreq_n>;
power-domains = <&gcc GCC_PCIE_1_GDSC>;
resets = <&gcc GCC_PCIE_1_BCR>;
reset-names = "pci";
perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&pp3300_ssd>;
};
};