| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2023 Loongson Technology Corporation Limited |
| */ |
| |
| #include <drm/drm_managed.h> |
| |
| #include "lsdc_drv.h" |
| #include "lsdc_output.h" |
| |
| /* |
| * __lsdc_gpio_i2c_set - set the state of a gpio pin indicated by mask |
| * @mask: gpio pin mask |
| * @state: "0" for low, "1" for high |
| */ |
| static void __lsdc_gpio_i2c_set(struct lsdc_i2c * const li2c, int mask, int state) |
| { |
| struct lsdc_device *ldev = to_lsdc(li2c->ddev); |
| unsigned long flags; |
| u8 val; |
| |
| spin_lock_irqsave(&ldev->reglock, flags); |
| |
| if (state) { |
| /* |
| * Setting this pin as input directly, write 1 for input. |
| * The external pull-up resistor will pull the level up |
| */ |
| val = readb(li2c->dir_reg); |
| val |= mask; |
| writeb(val, li2c->dir_reg); |
| } else { |
| /* First set this pin as output, write 0 for output */ |
| val = readb(li2c->dir_reg); |
| val &= ~mask; |
| writeb(val, li2c->dir_reg); |
| |
| /* Then, make this pin output 0 */ |
| val = readb(li2c->dat_reg); |
| val &= ~mask; |
| writeb(val, li2c->dat_reg); |
| } |
| |
| spin_unlock_irqrestore(&ldev->reglock, flags); |
| } |
| |
| /* |
| * __lsdc_gpio_i2c_get - read value back from the gpio pin indicated by mask |
| * @mask: gpio pin mask |
| * return "0" for low, "1" for high |
| */ |
| static int __lsdc_gpio_i2c_get(struct lsdc_i2c * const li2c, int mask) |
| { |
| struct lsdc_device *ldev = to_lsdc(li2c->ddev); |
| unsigned long flags; |
| u8 val; |
| |
| spin_lock_irqsave(&ldev->reglock, flags); |
| |
| /* First set this pin as input */ |
| val = readb(li2c->dir_reg); |
| val |= mask; |
| writeb(val, li2c->dir_reg); |
| |
| /* Then get level state from this pin */ |
| val = readb(li2c->dat_reg); |
| |
| spin_unlock_irqrestore(&ldev->reglock, flags); |
| |
| return (val & mask) ? 1 : 0; |
| } |
| |
| static void lsdc_gpio_i2c_set_sda(void *i2c, int state) |
| { |
| struct lsdc_i2c * const li2c = (struct lsdc_i2c *)i2c; |
| /* set state on the li2c->sda pin */ |
| return __lsdc_gpio_i2c_set(li2c, li2c->sda, state); |
| } |
| |
| static void lsdc_gpio_i2c_set_scl(void *i2c, int state) |
| { |
| struct lsdc_i2c * const li2c = (struct lsdc_i2c *)i2c; |
| /* set state on the li2c->scl pin */ |
| return __lsdc_gpio_i2c_set(li2c, li2c->scl, state); |
| } |
| |
| static int lsdc_gpio_i2c_get_sda(void *i2c) |
| { |
| struct lsdc_i2c * const li2c = (struct lsdc_i2c *)i2c; |
| /* read value from the li2c->sda pin */ |
| return __lsdc_gpio_i2c_get(li2c, li2c->sda); |
| } |
| |
| static int lsdc_gpio_i2c_get_scl(void *i2c) |
| { |
| struct lsdc_i2c * const li2c = (struct lsdc_i2c *)i2c; |
| /* read the value from the li2c->scl pin */ |
| return __lsdc_gpio_i2c_get(li2c, li2c->scl); |
| } |
| |
| static void lsdc_destroy_i2c(struct drm_device *ddev, void *data) |
| { |
| struct lsdc_i2c *li2c = (struct lsdc_i2c *)data; |
| |
| if (li2c) { |
| i2c_del_adapter(&li2c->adapter); |
| kfree(li2c); |
| } |
| } |
| |
| /* |
| * The DC in ls7a1000/ls7a2000/ls2k2000 has builtin gpio hardware |
| * |
| * @reg_base: gpio reg base |
| * @index: output channel index, 0 for PIPE0, 1 for PIPE1 |
| */ |
| int lsdc_create_i2c_chan(struct drm_device *ddev, |
| struct lsdc_display_pipe *dispipe, |
| unsigned int index) |
| { |
| struct lsdc_device *ldev = to_lsdc(ddev); |
| struct i2c_adapter *adapter; |
| struct lsdc_i2c *li2c; |
| int ret; |
| |
| li2c = kzalloc(sizeof(*li2c), GFP_KERNEL); |
| if (!li2c) |
| return -ENOMEM; |
| |
| dispipe->li2c = li2c; |
| |
| if (index == 0) { |
| li2c->sda = 0x01; /* pin 0 */ |
| li2c->scl = 0x02; /* pin 1 */ |
| } else if (index == 1) { |
| li2c->sda = 0x04; /* pin 2 */ |
| li2c->scl = 0x08; /* pin 3 */ |
| } else { |
| return -ENOENT; |
| } |
| |
| li2c->ddev = ddev; |
| li2c->dir_reg = ldev->reg_base + LS7A_DC_GPIO_DIR_REG; |
| li2c->dat_reg = ldev->reg_base + LS7A_DC_GPIO_DAT_REG; |
| |
| li2c->bit.setsda = lsdc_gpio_i2c_set_sda; |
| li2c->bit.setscl = lsdc_gpio_i2c_set_scl; |
| li2c->bit.getsda = lsdc_gpio_i2c_get_sda; |
| li2c->bit.getscl = lsdc_gpio_i2c_get_scl; |
| li2c->bit.udelay = 5; |
| li2c->bit.timeout = usecs_to_jiffies(2200); |
| li2c->bit.data = li2c; |
| |
| adapter = &li2c->adapter; |
| adapter->algo_data = &li2c->bit; |
| adapter->owner = THIS_MODULE; |
| adapter->dev.parent = ddev->dev; |
| adapter->nr = -1; |
| |
| snprintf(adapter->name, sizeof(adapter->name), "lsdc-i2c%u", index); |
| |
| i2c_set_adapdata(adapter, li2c); |
| |
| ret = i2c_bit_add_bus(adapter); |
| if (ret) { |
| kfree(li2c); |
| return ret; |
| } |
| |
| ret = drmm_add_action_or_reset(ddev, lsdc_destroy_i2c, li2c); |
| if (ret) |
| return ret; |
| |
| drm_info(ddev, "%s(sda pin mask=%u, scl pin mask=%u) created\n", |
| adapter->name, li2c->sda, li2c->scl); |
| |
| return 0; |
| } |