| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // MP8867/MP8869 regulator driver |
| // |
| // Copyright (C) 2020 Synaptics Incorporated |
| // |
| // Author: Jisheng Zhang <jszhang@kernel.org> |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| #define MP886X_VSEL 0x00 |
| #define MP886X_V_BOOT (1 << 7) |
| #define MP886X_SYSCNTLREG1 0x01 |
| #define MP886X_MODE (1 << 0) |
| #define MP886X_SLEW_SHIFT 3 |
| #define MP886X_SLEW_MASK (0x7 << MP886X_SLEW_SHIFT) |
| #define MP886X_GO (1 << 6) |
| #define MP886X_EN (1 << 7) |
| #define MP8869_SYSCNTLREG2 0x02 |
| |
| struct mp886x_cfg_info { |
| const struct regulator_ops *rops; |
| const unsigned int slew_rates[8]; |
| const int switch_freq[4]; |
| const u8 fs_reg; |
| const u8 fs_shift; |
| }; |
| |
| struct mp886x_device_info { |
| struct device *dev; |
| struct regulator_desc desc; |
| struct regulator_init_data *regulator; |
| struct gpio_desc *en_gpio; |
| const struct mp886x_cfg_info *ci; |
| u32 r[2]; |
| unsigned int sel; |
| }; |
| |
| static void mp886x_set_switch_freq(struct mp886x_device_info *di, |
| struct regmap *regmap, |
| u32 freq) |
| { |
| const struct mp886x_cfg_info *ci = di->ci; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(ci->switch_freq); i++) { |
| if (freq == ci->switch_freq[i]) { |
| regmap_update_bits(regmap, ci->fs_reg, |
| 0x3 << ci->fs_shift, i << ci->fs_shift); |
| return; |
| } |
| } |
| |
| dev_err(di->dev, "invalid frequency %d\n", freq); |
| } |
| |
| static int mp886x_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| switch (mode) { |
| case REGULATOR_MODE_FAST: |
| regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, |
| MP886X_MODE, MP886X_MODE); |
| break; |
| case REGULATOR_MODE_NORMAL: |
| regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, |
| MP886X_MODE, 0); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static unsigned int mp886x_get_mode(struct regulator_dev *rdev) |
| { |
| u32 val; |
| int ret; |
| |
| ret = regmap_read(rdev->regmap, MP886X_SYSCNTLREG1, &val); |
| if (ret < 0) |
| return ret; |
| if (val & MP886X_MODE) |
| return REGULATOR_MODE_FAST; |
| else |
| return REGULATOR_MODE_NORMAL; |
| } |
| |
| static int mp8869_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel) |
| { |
| int ret; |
| |
| ret = regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, |
| MP886X_GO, MP886X_GO); |
| if (ret < 0) |
| return ret; |
| |
| sel <<= ffs(rdev->desc->vsel_mask) - 1; |
| return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, |
| MP886X_V_BOOT | rdev->desc->vsel_mask, sel); |
| } |
| |
| static inline unsigned int mp8869_scale(unsigned int uv, u32 r1, u32 r2) |
| { |
| u32 tmp = uv * r1 / r2; |
| |
| return uv + tmp; |
| } |
| |
| static int mp8869_get_voltage_sel(struct regulator_dev *rdev) |
| { |
| struct mp886x_device_info *di = rdev_get_drvdata(rdev); |
| int ret, uv; |
| unsigned int val; |
| bool fbloop; |
| |
| ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); |
| if (ret) |
| return ret; |
| |
| fbloop = val & MP886X_V_BOOT; |
| if (fbloop) { |
| uv = rdev->desc->min_uV; |
| uv = mp8869_scale(uv, di->r[0], di->r[1]); |
| return regulator_map_voltage_linear(rdev, uv, uv); |
| } |
| |
| val &= rdev->desc->vsel_mask; |
| val >>= ffs(rdev->desc->vsel_mask) - 1; |
| |
| return val; |
| } |
| |
| static const struct regulator_ops mp8869_regulator_ops = { |
| .set_voltage_sel = mp8869_set_voltage_sel, |
| .get_voltage_sel = mp8869_get_voltage_sel, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .map_voltage = regulator_map_voltage_linear, |
| .list_voltage = regulator_list_voltage_linear, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .set_mode = mp886x_set_mode, |
| .get_mode = mp886x_get_mode, |
| .set_ramp_delay = regulator_set_ramp_delay_regmap, |
| }; |
| |
| static const struct mp886x_cfg_info mp8869_ci = { |
| .rops = &mp8869_regulator_ops, |
| .slew_rates = { |
| 40000, |
| 30000, |
| 20000, |
| 10000, |
| 5000, |
| 2500, |
| 1250, |
| 625, |
| }, |
| .switch_freq = { |
| 500000, |
| 750000, |
| 1000000, |
| 1250000, |
| }, |
| .fs_reg = MP8869_SYSCNTLREG2, |
| .fs_shift = 4, |
| }; |
| |
| static int mp8867_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel) |
| { |
| struct mp886x_device_info *di = rdev_get_drvdata(rdev); |
| int ret, delta; |
| |
| ret = mp8869_set_voltage_sel(rdev, sel); |
| if (ret < 0) |
| return ret; |
| |
| delta = di->sel - sel; |
| if (abs(delta) <= 5) |
| ret = regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1, |
| MP886X_GO, 0); |
| di->sel = sel; |
| |
| return ret; |
| } |
| |
| static int mp8867_get_voltage_sel(struct regulator_dev *rdev) |
| { |
| struct mp886x_device_info *di = rdev_get_drvdata(rdev); |
| int ret, uv; |
| unsigned int val; |
| bool fbloop; |
| |
| ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val); |
| if (ret) |
| return ret; |
| |
| fbloop = val & MP886X_V_BOOT; |
| |
| val &= rdev->desc->vsel_mask; |
| val >>= ffs(rdev->desc->vsel_mask) - 1; |
| |
| if (fbloop) { |
| uv = regulator_list_voltage_linear(rdev, val); |
| uv = mp8869_scale(uv, di->r[0], di->r[1]); |
| return regulator_map_voltage_linear(rdev, uv, uv); |
| } |
| |
| return val; |
| } |
| |
| static const struct regulator_ops mp8867_regulator_ops = { |
| .set_voltage_sel = mp8867_set_voltage_sel, |
| .get_voltage_sel = mp8867_get_voltage_sel, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .map_voltage = regulator_map_voltage_linear, |
| .list_voltage = regulator_list_voltage_linear, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .set_mode = mp886x_set_mode, |
| .get_mode = mp886x_get_mode, |
| .set_ramp_delay = regulator_set_ramp_delay_regmap, |
| }; |
| |
| static const struct mp886x_cfg_info mp8867_ci = { |
| .rops = &mp8867_regulator_ops, |
| .slew_rates = { |
| 64000, |
| 32000, |
| 16000, |
| 8000, |
| 4000, |
| 2000, |
| 1000, |
| 500, |
| }, |
| .switch_freq = { |
| 500000, |
| 750000, |
| 1000000, |
| 1500000, |
| }, |
| .fs_reg = MP886X_SYSCNTLREG1, |
| .fs_shift = 1, |
| }; |
| |
| static int mp886x_regulator_register(struct mp886x_device_info *di, |
| struct regulator_config *config) |
| { |
| struct regulator_desc *rdesc = &di->desc; |
| struct regulator_dev *rdev; |
| |
| rdesc->name = "mp886x-reg"; |
| rdesc->supply_name = "vin"; |
| rdesc->ops = di->ci->rops; |
| rdesc->type = REGULATOR_VOLTAGE; |
| rdesc->n_voltages = 128; |
| rdesc->enable_reg = MP886X_SYSCNTLREG1; |
| rdesc->enable_mask = MP886X_EN; |
| rdesc->min_uV = 600000; |
| rdesc->uV_step = 10000; |
| rdesc->vsel_reg = MP886X_VSEL; |
| rdesc->vsel_mask = 0x3f; |
| rdesc->ramp_reg = MP886X_SYSCNTLREG1; |
| rdesc->ramp_mask = MP886X_SLEW_MASK; |
| rdesc->ramp_delay_table = di->ci->slew_rates; |
| rdesc->n_ramp_values = ARRAY_SIZE(di->ci->slew_rates); |
| rdesc->owner = THIS_MODULE; |
| |
| rdev = devm_regulator_register(di->dev, &di->desc, config); |
| if (IS_ERR(rdev)) |
| return PTR_ERR(rdev); |
| di->sel = rdesc->ops->get_voltage_sel(rdev); |
| return 0; |
| } |
| |
| static const struct regmap_config mp886x_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| }; |
| |
| static int mp886x_i2c_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct device_node *np = dev->of_node; |
| struct mp886x_device_info *di; |
| struct regulator_config config = { }; |
| struct regmap *regmap; |
| u32 freq; |
| int ret; |
| |
| di = devm_kzalloc(dev, sizeof(struct mp886x_device_info), GFP_KERNEL); |
| if (!di) |
| return -ENOMEM; |
| |
| di->regulator = of_get_regulator_init_data(dev, np, &di->desc); |
| if (!di->regulator) { |
| dev_err(dev, "Platform data not found!\n"); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_array(np, "mps,fb-voltage-divider", |
| di->r, 2); |
| if (ret) |
| return ret; |
| |
| di->en_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH); |
| if (IS_ERR(di->en_gpio)) |
| return PTR_ERR(di->en_gpio); |
| |
| di->ci = i2c_get_match_data(client); |
| di->dev = dev; |
| |
| regmap = devm_regmap_init_i2c(client, &mp886x_regmap_config); |
| if (IS_ERR(regmap)) { |
| dev_err(dev, "Failed to allocate regmap!\n"); |
| return PTR_ERR(regmap); |
| } |
| i2c_set_clientdata(client, di); |
| |
| config.dev = di->dev; |
| config.init_data = di->regulator; |
| config.regmap = regmap; |
| config.driver_data = di; |
| config.of_node = np; |
| |
| if (!of_property_read_u32(np, "mps,switch-frequency-hz", &freq)) |
| mp886x_set_switch_freq(di, regmap, freq); |
| |
| ret = mp886x_regulator_register(di, &config); |
| if (ret < 0) |
| dev_err(dev, "Failed to register regulator!\n"); |
| return ret; |
| } |
| |
| static const struct of_device_id mp886x_dt_ids[] = { |
| { .compatible = "mps,mp8867", .data = &mp8867_ci }, |
| { .compatible = "mps,mp8869", .data = &mp8869_ci }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, mp886x_dt_ids); |
| |
| static const struct i2c_device_id mp886x_id[] = { |
| { "mp886x", (kernel_ulong_t)&mp8869_ci }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, mp886x_id); |
| |
| static struct i2c_driver mp886x_regulator_driver = { |
| .driver = { |
| .name = "mp886x-regulator", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .of_match_table = mp886x_dt_ids, |
| }, |
| .probe = mp886x_i2c_probe, |
| .id_table = mp886x_id, |
| }; |
| module_i2c_driver(mp886x_regulator_driver); |
| |
| MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>"); |
| MODULE_DESCRIPTION("MP886x regulator driver"); |
| MODULE_LICENSE("GPL v2"); |