| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/memblock.h> |
| #include <linux/cc_platform.h> |
| #include <linux/pgtable.h> |
| |
| #include <asm/set_memory.h> |
| #include <asm/realmode.h> |
| #include <asm/tlbflush.h> |
| #include <asm/crash.h> |
| #include <asm/sev.h> |
| |
| struct real_mode_header *real_mode_header; |
| u32 *trampoline_cr4_features; |
| |
| /* Hold the pgd entry used on booting additional CPUs */ |
| pgd_t trampoline_pgd_entry; |
| |
| void load_trampoline_pgtable(void) |
| { |
| #ifdef CONFIG_X86_32 |
| load_cr3(initial_page_table); |
| #else |
| /* |
| * This function is called before exiting to real-mode and that will |
| * fail with CR4.PCIDE still set. |
| */ |
| if (boot_cpu_has(X86_FEATURE_PCID)) |
| cr4_clear_bits(X86_CR4_PCIDE); |
| |
| write_cr3(real_mode_header->trampoline_pgd); |
| #endif |
| |
| /* |
| * The CR3 write above will not flush global TLB entries. |
| * Stale, global entries from previous page tables may still be |
| * present. Flush those stale entries. |
| * |
| * This ensures that memory accessed while running with |
| * trampoline_pgd is *actually* mapped into trampoline_pgd. |
| */ |
| __flush_tlb_all(); |
| } |
| |
| void __init reserve_real_mode(void) |
| { |
| phys_addr_t mem; |
| size_t size = real_mode_size_needed(); |
| |
| if (!size) |
| return; |
| |
| WARN_ON(slab_is_available()); |
| |
| /* Has to be under 1M so we can execute real-mode AP code. */ |
| mem = memblock_phys_alloc_range(size, PAGE_SIZE, 0, 1<<20); |
| if (!mem) |
| pr_info("No sub-1M memory is available for the trampoline\n"); |
| else |
| set_real_mode_mem(mem); |
| |
| /* |
| * Unconditionally reserve the entire fisrt 1M, see comment in |
| * setup_arch(). |
| */ |
| memblock_reserve(0, SZ_1M); |
| } |
| |
| static void sme_sev_setup_real_mode(struct trampoline_header *th) |
| { |
| #ifdef CONFIG_AMD_MEM_ENCRYPT |
| if (cc_platform_has(CC_ATTR_HOST_MEM_ENCRYPT)) |
| th->flags |= TH_FLAGS_SME_ACTIVE; |
| |
| if (cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT)) { |
| /* |
| * Skip the call to verify_cpu() in secondary_startup_64 as it |
| * will cause #VC exceptions when the AP can't handle them yet. |
| */ |
| th->start = (u64) secondary_startup_64_no_verify; |
| |
| if (sev_es_setup_ap_jump_table(real_mode_header)) |
| panic("Failed to get/update SEV-ES AP Jump Table"); |
| } |
| #endif |
| } |
| |
| static void __init setup_real_mode(void) |
| { |
| u16 real_mode_seg; |
| const u32 *rel; |
| u32 count; |
| unsigned char *base; |
| unsigned long phys_base; |
| struct trampoline_header *trampoline_header; |
| size_t size = PAGE_ALIGN(real_mode_blob_end - real_mode_blob); |
| #ifdef CONFIG_X86_64 |
| u64 *trampoline_pgd; |
| u64 efer; |
| int i; |
| #endif |
| |
| base = (unsigned char *)real_mode_header; |
| |
| /* |
| * If SME is active, the trampoline area will need to be in |
| * decrypted memory in order to bring up other processors |
| * successfully. This is not needed for SEV. |
| */ |
| if (cc_platform_has(CC_ATTR_HOST_MEM_ENCRYPT)) |
| set_memory_decrypted((unsigned long)base, size >> PAGE_SHIFT); |
| |
| memcpy(base, real_mode_blob, size); |
| |
| phys_base = __pa(base); |
| real_mode_seg = phys_base >> 4; |
| |
| rel = (u32 *) real_mode_relocs; |
| |
| /* 16-bit segment relocations. */ |
| count = *rel++; |
| while (count--) { |
| u16 *seg = (u16 *) (base + *rel++); |
| *seg = real_mode_seg; |
| } |
| |
| /* 32-bit linear relocations. */ |
| count = *rel++; |
| while (count--) { |
| u32 *ptr = (u32 *) (base + *rel++); |
| *ptr += phys_base; |
| } |
| |
| /* Must be performed *after* relocation. */ |
| trampoline_header = (struct trampoline_header *) |
| __va(real_mode_header->trampoline_header); |
| |
| #ifdef CONFIG_X86_32 |
| trampoline_header->start = __pa_symbol(startup_32_smp); |
| trampoline_header->gdt_limit = __BOOT_DS + 7; |
| trampoline_header->gdt_base = __pa_symbol(boot_gdt); |
| #else |
| /* |
| * Some AMD processors will #GP(0) if EFER.LMA is set in WRMSR |
| * so we need to mask it out. |
| */ |
| rdmsrl(MSR_EFER, efer); |
| trampoline_header->efer = efer & ~EFER_LMA; |
| |
| trampoline_header->start = (u64) secondary_startup_64; |
| trampoline_cr4_features = &trampoline_header->cr4; |
| *trampoline_cr4_features = mmu_cr4_features; |
| |
| trampoline_header->flags = 0; |
| |
| trampoline_pgd = (u64 *) __va(real_mode_header->trampoline_pgd); |
| |
| /* Map the real mode stub as virtual == physical */ |
| trampoline_pgd[0] = trampoline_pgd_entry.pgd; |
| |
| /* |
| * Include the entirety of the kernel mapping into the trampoline |
| * PGD. This way, all mappings present in the normal kernel page |
| * tables are usable while running on trampoline_pgd. |
| */ |
| for (i = pgd_index(__PAGE_OFFSET); i < PTRS_PER_PGD; i++) |
| trampoline_pgd[i] = init_top_pgt[i].pgd; |
| #endif |
| |
| sme_sev_setup_real_mode(trampoline_header); |
| } |
| |
| /* |
| * reserve_real_mode() gets called very early, to guarantee the |
| * availability of low memory. This is before the proper kernel page |
| * tables are set up, so we cannot set page permissions in that |
| * function. Also trampoline code will be executed by APs so we |
| * need to mark it executable at do_pre_smp_initcalls() at least, |
| * thus run it as a early_initcall(). |
| */ |
| static void __init set_real_mode_permissions(void) |
| { |
| unsigned char *base = (unsigned char *) real_mode_header; |
| size_t size = PAGE_ALIGN(real_mode_blob_end - real_mode_blob); |
| |
| size_t ro_size = |
| PAGE_ALIGN(real_mode_header->ro_end) - |
| __pa(base); |
| |
| size_t text_size = |
| PAGE_ALIGN(real_mode_header->ro_end) - |
| real_mode_header->text_start; |
| |
| unsigned long text_start = |
| (unsigned long) __va(real_mode_header->text_start); |
| |
| set_memory_nx((unsigned long) base, size >> PAGE_SHIFT); |
| set_memory_ro((unsigned long) base, ro_size >> PAGE_SHIFT); |
| set_memory_x((unsigned long) text_start, text_size >> PAGE_SHIFT); |
| } |
| |
| static int __init init_real_mode(void) |
| { |
| if (!real_mode_header) |
| panic("Real mode trampoline was not allocated"); |
| |
| setup_real_mode(); |
| set_real_mode_permissions(); |
| |
| return 0; |
| } |
| early_initcall(init_real_mode); |