| .. SPDX-License-Identifier: GPL-2.0-or-later |
| |
| Kernel driver aquacomputer-d5next |
| ================================= |
| |
| Supported devices: |
| |
| * Aquacomputer D5 Next watercooling pump |
| * Aquacomputer Farbwerk 360 RGB controller |
| |
| Author: Aleksa Savic |
| |
| Description |
| ----------- |
| |
| This driver exposes hardware sensors of listed Aquacomputer devices, which |
| communicate through proprietary USB HID protocols. |
| |
| For the D5 Next pump, available sensors are pump and fan speed, power, voltage |
| and current, as well as coolant temperature. Also available through debugfs are |
| the serial number, firmware version and power-on count. Attaching a fan to it is |
| optional and allows it to be controlled using temperature curves directly from the |
| pump. If it's not connected, the fan-related sensors will report zeroes. |
| |
| The pump can be configured either through software or via its physical |
| interface. Configuring the pump through this driver is not implemented, as it |
| seems to require sending it a complete configuration. That includes addressable |
| RGB LEDs, for which there is no standard sysfs interface. Thus, that task is |
| better suited for userspace tools. |
| |
| The Farbwerk 360 exposes four temperature sensors. Depending on the device, |
| not all sysfs and debugfs entries will be available. |
| |
| Usage notes |
| ----------- |
| |
| The devices communicate via HID reports. The driver is loaded automatically by |
| the kernel and supports hotswapping. |
| |
| Sysfs entries |
| ------------- |
| |
| ================ ============================================= |
| temp[1-4]_input Temperature sensors (in millidegrees Celsius) |
| fan[1-2]_input Pump/fan speed (in RPM) |
| power[1-2]_input Pump/fan power (in micro Watts) |
| in[0-2]_input Pump/fan voltage (in milli Volts) |
| curr[1-2]_input Pump/fan current (in milli Amperes) |
| ================ ============================================= |
| |
| Debugfs entries |
| --------------- |
| |
| ================ ================================================= |
| serial_number Serial number of the device |
| firmware_version Version of installed firmware |
| power_cycles Count of how many times the device was powered on |
| ================ ================================================= |
