| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * KVM page table test |
| * |
| * Copyright (C) 2021, Huawei, Inc. |
| * |
| * Make sure that THP has been enabled or enough HUGETLB pages with specific |
| * page size have been pre-allocated on your system, if you are planning to |
| * use hugepages to back the guest memory for testing. |
| */ |
| |
| #define _GNU_SOURCE /* for program_invocation_name */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <time.h> |
| #include <pthread.h> |
| #include <semaphore.h> |
| |
| #include "test_util.h" |
| #include "kvm_util.h" |
| #include "processor.h" |
| #include "guest_modes.h" |
| |
| #define TEST_MEM_SLOT_INDEX 1 |
| |
| /* Default size(1GB) of the memory for testing */ |
| #define DEFAULT_TEST_MEM_SIZE (1 << 30) |
| |
| /* Default guest test virtual memory offset */ |
| #define DEFAULT_GUEST_TEST_MEM 0xc0000000 |
| |
| /* Different guest memory accessing stages */ |
| enum test_stage { |
| KVM_BEFORE_MAPPINGS, |
| KVM_CREATE_MAPPINGS, |
| KVM_UPDATE_MAPPINGS, |
| KVM_ADJUST_MAPPINGS, |
| NUM_TEST_STAGES, |
| }; |
| |
| static const char * const test_stage_string[] = { |
| "KVM_BEFORE_MAPPINGS", |
| "KVM_CREATE_MAPPINGS", |
| "KVM_UPDATE_MAPPINGS", |
| "KVM_ADJUST_MAPPINGS", |
| }; |
| |
| struct vcpu_args { |
| int vcpu_id; |
| bool vcpu_write; |
| }; |
| |
| struct test_args { |
| struct kvm_vm *vm; |
| uint64_t guest_test_virt_mem; |
| uint64_t host_page_size; |
| uint64_t host_num_pages; |
| uint64_t large_page_size; |
| uint64_t large_num_pages; |
| uint64_t host_pages_per_lpage; |
| enum vm_mem_backing_src_type src_type; |
| struct vcpu_args vcpu_args[KVM_MAX_VCPUS]; |
| }; |
| |
| /* |
| * Guest variables. Use addr_gva2hva() if these variables need |
| * to be changed in host. |
| */ |
| static enum test_stage guest_test_stage; |
| |
| /* Host variables */ |
| static uint32_t nr_vcpus = 1; |
| static struct test_args test_args; |
| static enum test_stage *current_stage; |
| static bool host_quit; |
| |
| /* Whether the test stage is updated, or completed */ |
| static sem_t test_stage_updated; |
| static sem_t test_stage_completed; |
| |
| /* |
| * Guest physical memory offset of the testing memory slot. |
| * This will be set to the topmost valid physical address minus |
| * the test memory size. |
| */ |
| static uint64_t guest_test_phys_mem; |
| |
| /* |
| * Guest virtual memory offset of the testing memory slot. |
| * Must not conflict with identity mapped test code. |
| */ |
| static uint64_t guest_test_virt_mem = DEFAULT_GUEST_TEST_MEM; |
| |
| static void guest_code(int vcpu_id) |
| { |
| struct test_args *p = &test_args; |
| struct vcpu_args *vcpu_args = &p->vcpu_args[vcpu_id]; |
| enum test_stage *current_stage = &guest_test_stage; |
| uint64_t addr; |
| int i, j; |
| |
| /* Make sure vCPU args data structure is not corrupt */ |
| GUEST_ASSERT(vcpu_args->vcpu_id == vcpu_id); |
| |
| while (true) { |
| addr = p->guest_test_virt_mem; |
| |
| switch (READ_ONCE(*current_stage)) { |
| /* |
| * All vCPU threads will be started in this stage, |
| * where guest code of each vCPU will do nothing. |
| */ |
| case KVM_BEFORE_MAPPINGS: |
| break; |
| |
| /* |
| * Before dirty logging, vCPUs concurrently access the first |
| * 8 bytes of each page (host page/large page) within the same |
| * memory region with different accessing types (read/write). |
| * Then KVM will create normal page mappings or huge block |
| * mappings for them. |
| */ |
| case KVM_CREATE_MAPPINGS: |
| for (i = 0; i < p->large_num_pages; i++) { |
| if (vcpu_args->vcpu_write) |
| *(uint64_t *)addr = 0x0123456789ABCDEF; |
| else |
| READ_ONCE(*(uint64_t *)addr); |
| |
| addr += p->large_page_size; |
| } |
| break; |
| |
| /* |
| * During dirty logging, KVM will only update attributes of the |
| * normal page mappings from RO to RW if memory backing src type |
| * is anonymous. In other cases, KVM will split the huge block |
| * mappings into normal page mappings if memory backing src type |
| * is THP or HUGETLB. |
| */ |
| case KVM_UPDATE_MAPPINGS: |
| if (p->src_type == VM_MEM_SRC_ANONYMOUS) { |
| for (i = 0; i < p->host_num_pages; i++) { |
| *(uint64_t *)addr = 0x0123456789ABCDEF; |
| addr += p->host_page_size; |
| } |
| break; |
| } |
| |
| for (i = 0; i < p->large_num_pages; i++) { |
| /* |
| * Write to the first host page in each large |
| * page region, and triger break of large pages. |
| */ |
| *(uint64_t *)addr = 0x0123456789ABCDEF; |
| |
| /* |
| * Access the middle host pages in each large |
| * page region. Since dirty logging is enabled, |
| * this will create new mappings at the smallest |
| * granularity. |
| */ |
| addr += p->large_page_size / 2; |
| for (j = 0; j < p->host_pages_per_lpage / 2; j++) { |
| READ_ONCE(*(uint64_t *)addr); |
| addr += p->host_page_size; |
| } |
| } |
| break; |
| |
| /* |
| * After dirty logging is stopped, vCPUs concurrently read |
| * from every single host page. Then KVM will coalesce the |
| * split page mappings back to block mappings. And a TLB |
| * conflict abort could occur here if TLB entries of the |
| * page mappings are not fully invalidated. |
| */ |
| case KVM_ADJUST_MAPPINGS: |
| for (i = 0; i < p->host_num_pages; i++) { |
| READ_ONCE(*(uint64_t *)addr); |
| addr += p->host_page_size; |
| } |
| break; |
| |
| default: |
| GUEST_ASSERT(0); |
| } |
| |
| GUEST_SYNC(1); |
| } |
| } |
| |
| static void *vcpu_worker(void *data) |
| { |
| int ret; |
| struct vcpu_args *vcpu_args = data; |
| struct kvm_vm *vm = test_args.vm; |
| int vcpu_id = vcpu_args->vcpu_id; |
| struct kvm_run *run; |
| struct timespec start; |
| struct timespec ts_diff; |
| enum test_stage stage; |
| |
| vcpu_args_set(vm, vcpu_id, 1, vcpu_id); |
| run = vcpu_state(vm, vcpu_id); |
| |
| while (!READ_ONCE(host_quit)) { |
| ret = sem_wait(&test_stage_updated); |
| TEST_ASSERT(ret == 0, "Error in sem_wait"); |
| |
| if (READ_ONCE(host_quit)) |
| return NULL; |
| |
| clock_gettime(CLOCK_MONOTONIC_RAW, &start); |
| ret = _vcpu_run(vm, vcpu_id); |
| ts_diff = timespec_elapsed(start); |
| |
| TEST_ASSERT(ret == 0, "vcpu_run failed: %d\n", ret); |
| TEST_ASSERT(get_ucall(vm, vcpu_id, NULL) == UCALL_SYNC, |
| "Invalid guest sync status: exit_reason=%s\n", |
| exit_reason_str(run->exit_reason)); |
| |
| pr_debug("Got sync event from vCPU %d\n", vcpu_id); |
| stage = READ_ONCE(*current_stage); |
| |
| /* |
| * Here we can know the execution time of every |
| * single vcpu running in different test stages. |
| */ |
| pr_debug("vCPU %d has completed stage %s\n" |
| "execution time is: %ld.%.9lds\n\n", |
| vcpu_id, test_stage_string[stage], |
| ts_diff.tv_sec, ts_diff.tv_nsec); |
| |
| ret = sem_post(&test_stage_completed); |
| TEST_ASSERT(ret == 0, "Error in sem_post"); |
| } |
| |
| return NULL; |
| } |
| |
| struct test_params { |
| uint64_t phys_offset; |
| uint64_t test_mem_size; |
| enum vm_mem_backing_src_type src_type; |
| }; |
| |
| static struct kvm_vm *pre_init_before_test(enum vm_guest_mode mode, void *arg) |
| { |
| int ret; |
| struct test_params *p = arg; |
| struct vcpu_args *vcpu_args; |
| enum vm_mem_backing_src_type src_type = p->src_type; |
| uint64_t large_page_size = get_backing_src_pagesz(src_type); |
| uint64_t guest_page_size = vm_guest_mode_params[mode].page_size; |
| uint64_t host_page_size = getpagesize(); |
| uint64_t test_mem_size = p->test_mem_size; |
| uint64_t guest_num_pages; |
| uint64_t alignment; |
| void *host_test_mem; |
| struct kvm_vm *vm; |
| int vcpu_id; |
| |
| /* Align up the test memory size */ |
| alignment = max(large_page_size, guest_page_size); |
| test_mem_size = (test_mem_size + alignment - 1) & ~(alignment - 1); |
| |
| /* Create a VM with enough guest pages */ |
| guest_num_pages = test_mem_size / guest_page_size; |
| vm = vm_create_with_vcpus(mode, nr_vcpus, DEFAULT_GUEST_PHY_PAGES, |
| guest_num_pages, 0, guest_code, NULL); |
| |
| /* Align down GPA of the testing memslot */ |
| if (!p->phys_offset) |
| guest_test_phys_mem = (vm_get_max_gfn(vm) - guest_num_pages) * |
| guest_page_size; |
| else |
| guest_test_phys_mem = p->phys_offset; |
| #ifdef __s390x__ |
| alignment = max(0x100000UL, alignment); |
| #endif |
| guest_test_phys_mem = align_down(guest_test_phys_mem, alignment); |
| |
| /* Set up the shared data structure test_args */ |
| test_args.vm = vm; |
| test_args.guest_test_virt_mem = guest_test_virt_mem; |
| test_args.host_page_size = host_page_size; |
| test_args.host_num_pages = test_mem_size / host_page_size; |
| test_args.large_page_size = large_page_size; |
| test_args.large_num_pages = test_mem_size / large_page_size; |
| test_args.host_pages_per_lpage = large_page_size / host_page_size; |
| test_args.src_type = src_type; |
| |
| for (vcpu_id = 0; vcpu_id < KVM_MAX_VCPUS; vcpu_id++) { |
| vcpu_args = &test_args.vcpu_args[vcpu_id]; |
| vcpu_args->vcpu_id = vcpu_id; |
| vcpu_args->vcpu_write = !(vcpu_id % 2); |
| } |
| |
| /* Add an extra memory slot with specified backing src type */ |
| vm_userspace_mem_region_add(vm, src_type, guest_test_phys_mem, |
| TEST_MEM_SLOT_INDEX, guest_num_pages, 0); |
| |
| /* Do mapping(GVA->GPA) for the testing memory slot */ |
| virt_map(vm, guest_test_virt_mem, guest_test_phys_mem, guest_num_pages); |
| |
| /* Cache the HVA pointer of the region */ |
| host_test_mem = addr_gpa2hva(vm, (vm_paddr_t)guest_test_phys_mem); |
| |
| /* Export shared structure test_args to guest */ |
| ucall_init(vm, NULL); |
| sync_global_to_guest(vm, test_args); |
| |
| ret = sem_init(&test_stage_updated, 0, 0); |
| TEST_ASSERT(ret == 0, "Error in sem_init"); |
| |
| ret = sem_init(&test_stage_completed, 0, 0); |
| TEST_ASSERT(ret == 0, "Error in sem_init"); |
| |
| current_stage = addr_gva2hva(vm, (vm_vaddr_t)(&guest_test_stage)); |
| *current_stage = NUM_TEST_STAGES; |
| |
| pr_info("Testing guest mode: %s\n", vm_guest_mode_string(mode)); |
| pr_info("Testing memory backing src type: %s\n", |
| vm_mem_backing_src_alias(src_type)->name); |
| pr_info("Testing memory backing src granularity: 0x%lx\n", |
| large_page_size); |
| pr_info("Testing memory size(aligned): 0x%lx\n", test_mem_size); |
| pr_info("Guest physical test memory offset: 0x%lx\n", |
| guest_test_phys_mem); |
| pr_info("Host virtual test memory offset: 0x%lx\n", |
| (uint64_t)host_test_mem); |
| pr_info("Number of testing vCPUs: %d\n", nr_vcpus); |
| |
| return vm; |
| } |
| |
| static void vcpus_complete_new_stage(enum test_stage stage) |
| { |
| int ret; |
| int vcpus; |
| |
| /* Wake up all the vcpus to run new test stage */ |
| for (vcpus = 0; vcpus < nr_vcpus; vcpus++) { |
| ret = sem_post(&test_stage_updated); |
| TEST_ASSERT(ret == 0, "Error in sem_post"); |
| } |
| pr_debug("All vcpus have been notified to continue\n"); |
| |
| /* Wait for all the vcpus to complete new test stage */ |
| for (vcpus = 0; vcpus < nr_vcpus; vcpus++) { |
| ret = sem_wait(&test_stage_completed); |
| TEST_ASSERT(ret == 0, "Error in sem_wait"); |
| |
| pr_debug("%d vcpus have completed stage %s\n", |
| vcpus + 1, test_stage_string[stage]); |
| } |
| |
| pr_debug("All vcpus have completed stage %s\n", |
| test_stage_string[stage]); |
| } |
| |
| static void run_test(enum vm_guest_mode mode, void *arg) |
| { |
| int ret; |
| pthread_t *vcpu_threads; |
| struct kvm_vm *vm; |
| int vcpu_id; |
| struct timespec start; |
| struct timespec ts_diff; |
| |
| /* Create VM with vCPUs and make some pre-initialization */ |
| vm = pre_init_before_test(mode, arg); |
| |
| vcpu_threads = malloc(nr_vcpus * sizeof(*vcpu_threads)); |
| TEST_ASSERT(vcpu_threads, "Memory allocation failed"); |
| |
| host_quit = false; |
| *current_stage = KVM_BEFORE_MAPPINGS; |
| |
| for (vcpu_id = 0; vcpu_id < nr_vcpus; vcpu_id++) { |
| pthread_create(&vcpu_threads[vcpu_id], NULL, vcpu_worker, |
| &test_args.vcpu_args[vcpu_id]); |
| } |
| |
| vcpus_complete_new_stage(*current_stage); |
| pr_info("Started all vCPUs successfully\n"); |
| |
| /* Test the stage of KVM creating mappings */ |
| *current_stage = KVM_CREATE_MAPPINGS; |
| |
| clock_gettime(CLOCK_MONOTONIC_RAW, &start); |
| vcpus_complete_new_stage(*current_stage); |
| ts_diff = timespec_elapsed(start); |
| |
| pr_info("KVM_CREATE_MAPPINGS: total execution time: %ld.%.9lds\n\n", |
| ts_diff.tv_sec, ts_diff.tv_nsec); |
| |
| /* Test the stage of KVM updating mappings */ |
| vm_mem_region_set_flags(vm, TEST_MEM_SLOT_INDEX, |
| KVM_MEM_LOG_DIRTY_PAGES); |
| |
| *current_stage = KVM_UPDATE_MAPPINGS; |
| |
| clock_gettime(CLOCK_MONOTONIC_RAW, &start); |
| vcpus_complete_new_stage(*current_stage); |
| ts_diff = timespec_elapsed(start); |
| |
| pr_info("KVM_UPDATE_MAPPINGS: total execution time: %ld.%.9lds\n\n", |
| ts_diff.tv_sec, ts_diff.tv_nsec); |
| |
| /* Test the stage of KVM adjusting mappings */ |
| vm_mem_region_set_flags(vm, TEST_MEM_SLOT_INDEX, 0); |
| |
| *current_stage = KVM_ADJUST_MAPPINGS; |
| |
| clock_gettime(CLOCK_MONOTONIC_RAW, &start); |
| vcpus_complete_new_stage(*current_stage); |
| ts_diff = timespec_elapsed(start); |
| |
| pr_info("KVM_ADJUST_MAPPINGS: total execution time: %ld.%.9lds\n\n", |
| ts_diff.tv_sec, ts_diff.tv_nsec); |
| |
| /* Tell the vcpu thread to quit */ |
| host_quit = true; |
| for (vcpu_id = 0; vcpu_id < nr_vcpus; vcpu_id++) { |
| ret = sem_post(&test_stage_updated); |
| TEST_ASSERT(ret == 0, "Error in sem_post"); |
| } |
| |
| for (vcpu_id = 0; vcpu_id < nr_vcpus; vcpu_id++) |
| pthread_join(vcpu_threads[vcpu_id], NULL); |
| |
| ret = sem_destroy(&test_stage_updated); |
| TEST_ASSERT(ret == 0, "Error in sem_destroy"); |
| |
| ret = sem_destroy(&test_stage_completed); |
| TEST_ASSERT(ret == 0, "Error in sem_destroy"); |
| |
| free(vcpu_threads); |
| ucall_uninit(vm); |
| kvm_vm_free(vm); |
| } |
| |
| static void help(char *name) |
| { |
| puts(""); |
| printf("usage: %s [-h] [-p offset] [-m mode] " |
| "[-b mem-size] [-v vcpus] [-s mem-type]\n", name); |
| puts(""); |
| printf(" -p: specify guest physical test memory offset\n" |
| " Warning: a low offset can conflict with the loaded test code.\n"); |
| guest_modes_help(); |
| printf(" -b: specify size of the memory region for testing. e.g. 10M or 3G.\n" |
| " (default: 1G)\n"); |
| printf(" -v: specify the number of vCPUs to run\n" |
| " (default: 1)\n"); |
| backing_src_help("-s"); |
| puts(""); |
| } |
| |
| int main(int argc, char *argv[]) |
| { |
| int max_vcpus = kvm_check_cap(KVM_CAP_MAX_VCPUS); |
| struct test_params p = { |
| .test_mem_size = DEFAULT_TEST_MEM_SIZE, |
| .src_type = DEFAULT_VM_MEM_SRC, |
| }; |
| int opt; |
| |
| guest_modes_append_default(); |
| |
| while ((opt = getopt(argc, argv, "hp:m:b:v:s:")) != -1) { |
| switch (opt) { |
| case 'p': |
| p.phys_offset = strtoull(optarg, NULL, 0); |
| break; |
| case 'm': |
| guest_modes_cmdline(optarg); |
| break; |
| case 'b': |
| p.test_mem_size = parse_size(optarg); |
| break; |
| case 'v': |
| nr_vcpus = atoi(optarg); |
| TEST_ASSERT(nr_vcpus > 0 && nr_vcpus <= max_vcpus, |
| "Invalid number of vcpus, must be between 1 and %d", max_vcpus); |
| break; |
| case 's': |
| p.src_type = parse_backing_src_type(optarg); |
| break; |
| case 'h': |
| default: |
| help(argv[0]); |
| exit(0); |
| } |
| } |
| |
| for_each_guest_mode(run_test, &p); |
| |
| return 0; |
| } |