| /* |
| * OMAP thermal definitions |
| * |
| * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ |
| * Contact: |
| * Eduardo Valentin <eduardo.valentin@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| #ifndef __TI_THERMAL_H |
| #define __TI_THERMAL_H |
| |
| #include "ti-bandgap.h" |
| |
| /* sensors gradient and offsets */ |
| #define OMAP_GRADIENT_SLOPE_4430 0 |
| #define OMAP_GRADIENT_CONST_4430 20000 |
| #define OMAP_GRADIENT_SLOPE_4460 348 |
| #define OMAP_GRADIENT_CONST_4460 -9301 |
| #define OMAP_GRADIENT_SLOPE_4470 308 |
| #define OMAP_GRADIENT_CONST_4470 -7896 |
| |
| #define OMAP_GRADIENT_SLOPE_5430_CPU 65 |
| #define OMAP_GRADIENT_CONST_5430_CPU -1791 |
| #define OMAP_GRADIENT_SLOPE_5430_GPU 117 |
| #define OMAP_GRADIENT_CONST_5430_GPU -2992 |
| |
| /* PCB sensor calculation constants */ |
| #define OMAP_GRADIENT_SLOPE_W_PCB_4430 0 |
| #define OMAP_GRADIENT_CONST_W_PCB_4430 20000 |
| #define OMAP_GRADIENT_SLOPE_W_PCB_4460 1142 |
| #define OMAP_GRADIENT_CONST_W_PCB_4460 -393 |
| #define OMAP_GRADIENT_SLOPE_W_PCB_4470 1063 |
| #define OMAP_GRADIENT_CONST_W_PCB_4470 -477 |
| |
| #define OMAP_GRADIENT_SLOPE_W_PCB_5430_CPU 100 |
| #define OMAP_GRADIENT_CONST_W_PCB_5430_CPU 484 |
| #define OMAP_GRADIENT_SLOPE_W_PCB_5430_GPU 464 |
| #define OMAP_GRADIENT_CONST_W_PCB_5430_GPU -5102 |
| |
| /* trip points of interest in milicelsius (at hotspot level) */ |
| #define OMAP_TRIP_COLD 100000 |
| #define OMAP_TRIP_HOT 110000 |
| #define OMAP_TRIP_SHUTDOWN 125000 |
| #define OMAP_TRIP_NUMBER 2 |
| #define OMAP_TRIP_STEP \ |
| ((OMAP_TRIP_SHUTDOWN - OMAP_TRIP_HOT) / (OMAP_TRIP_NUMBER - 1)) |
| |
| /* Update rates */ |
| #define FAST_TEMP_MONITORING_RATE 250 |
| |
| /* helper macros */ |
| /** |
| * ti_thermal_get_trip_value - returns trip temperature based on index |
| * @i: trip index |
| */ |
| #define ti_thermal_get_trip_value(i) \ |
| (OMAP_TRIP_HOT + ((i) * OMAP_TRIP_STEP)) |
| |
| /** |
| * ti_thermal_is_valid_trip - check for trip index |
| * @i: trip index |
| */ |
| #define ti_thermal_is_valid_trip(trip) \ |
| ((trip) >= 0 && (trip) < OMAP_TRIP_NUMBER) |
| |
| #ifdef CONFIG_TI_THERMAL |
| int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, char *domain); |
| int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id); |
| int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id); |
| int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id); |
| int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id); |
| #else |
| static inline |
| int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, char *domain) |
| { |
| return 0; |
| } |
| |
| static inline |
| int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id) |
| { |
| return 0; |
| } |
| |
| static inline |
| int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id) |
| { |
| return 0; |
| } |
| |
| static inline |
| int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id) |
| { |
| return 0; |
| } |
| |
| static inline |
| int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id) |
| { |
| return 0; |
| } |
| #endif |
| #endif |
