| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/iommu/renesas,ipmmu-vmsa.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Renesas VMSA-Compatible IOMMU |
| |
| maintainers: |
| - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> |
| |
| description: |
| The IPMMU is an IOMMU implementation compatible with the ARM VMSA page tables. |
| It provides address translation for bus masters outside of the CPU, each |
| connected to the IPMMU through a port called micro-TLB. |
| |
| properties: |
| compatible: |
| oneOf: |
| - items: |
| - enum: |
| - renesas,ipmmu-r8a73a4 # R-Mobile APE6 |
| - renesas,ipmmu-r8a7743 # RZ/G1M |
| - renesas,ipmmu-r8a7744 # RZ/G1N |
| - renesas,ipmmu-r8a7745 # RZ/G1E |
| - renesas,ipmmu-r8a7790 # R-Car H2 |
| - renesas,ipmmu-r8a7791 # R-Car M2-W |
| - renesas,ipmmu-r8a7793 # R-Car M2-N |
| - renesas,ipmmu-r8a7794 # R-Car E2 |
| - const: renesas,ipmmu-vmsa # R-Mobile APE6 or R-Car Gen2 or RZ/G1 |
| - items: |
| - enum: |
| - renesas,ipmmu-r8a774a1 # RZ/G2M |
| - renesas,ipmmu-r8a774b1 # RZ/G2N |
| - renesas,ipmmu-r8a774c0 # RZ/G2E |
| - renesas,ipmmu-r8a7795 # R-Car H3 |
| - renesas,ipmmu-r8a7796 # R-Car M3-W |
| - renesas,ipmmu-r8a77965 # R-Car M3-N |
| - renesas,ipmmu-r8a77970 # R-Car V3M |
| - renesas,ipmmu-r8a77980 # R-Car V3H |
| - renesas,ipmmu-r8a77990 # R-Car E3 |
| - renesas,ipmmu-r8a77995 # R-Car D3 |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| minItems: 1 |
| maxItems: 2 |
| description: |
| Specifiers for the MMU fault interrupts. Not required for cache IPMMUs. |
| items: |
| - description: non-secure mode |
| - description: secure mode if supported |
| |
| '#iommu-cells': |
| const: 1 |
| description: |
| The number of the micro-TLB that the device is connected to. |
| |
| power-domains: |
| maxItems: 1 |
| |
| renesas,ipmmu-main: |
| $ref: /schemas/types.yaml#/definitions/phandle-array |
| description: |
| Reference to the main IPMMU phandle plus 1 cell. The cell is |
| the interrupt bit number associated with the particular cache IPMMU |
| device. The interrupt bit number needs to match the main IPMMU IMSSTR |
| register. Only used by cache IPMMU instances. |
| |
| required: |
| - compatible |
| - reg |
| - '#iommu-cells' |
| - power-domains |
| |
| oneOf: |
| - required: |
| - interrupts |
| - required: |
| - renesas,ipmmu-main |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/r8a7791-cpg-mssr.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/r8a7791-sysc.h> |
| |
| ipmmu_mx: iommu@fe951000 { |
| compatible = "renasas,ipmmu-r8a7791", "renasas,ipmmu-vmsa"; |
| reg = <0xfe951000 0x1000>; |
| interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| #iommu-cells = <1>; |
| }; |