| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) |
| */ |
| |
| #include <linux/seq_file.h> |
| #include <linux/fs.h> |
| #include <linux/delay.h> |
| #include <linux/root_dev.h> |
| #include <linux/clk.h> |
| #include <linux/clocksource.h> |
| #include <linux/console.h> |
| #include <linux/module.h> |
| #include <linux/sizes.h> |
| #include <linux/cpu.h> |
| #include <linux/of_clk.h> |
| #include <linux/of_fdt.h> |
| #include <linux/of.h> |
| #include <linux/cache.h> |
| #include <uapi/linux/mount.h> |
| #include <asm/sections.h> |
| #include <asm/arcregs.h> |
| #include <asm/asserts.h> |
| #include <asm/tlb.h> |
| #include <asm/setup.h> |
| #include <asm/page.h> |
| #include <asm/irq.h> |
| #include <asm/unwind.h> |
| #include <asm/mach_desc.h> |
| #include <asm/smp.h> |
| #include <asm/dsp-impl.h> |
| |
| #define FIX_PTR(x) __asm__ __volatile__(";" : "+r"(x)) |
| |
| unsigned int intr_to_DE_cnt; |
| |
| /* Part of U-boot ABI: see head.S */ |
| int __initdata uboot_tag; |
| int __initdata uboot_magic; |
| char __initdata *uboot_arg; |
| |
| const struct machine_desc *machine_desc; |
| |
| struct task_struct *_current_task[NR_CPUS]; /* For stack switching */ |
| |
| struct cpuinfo_arc cpuinfo_arc700[NR_CPUS]; |
| |
| static const struct id_to_str arc_legacy_rel[] = { |
| /* ID.ARCVER, Release */ |
| #ifdef CONFIG_ISA_ARCOMPACT |
| { 0x34, "R4.10"}, |
| { 0x35, "R4.11"}, |
| #else |
| { 0x51, "R2.0" }, |
| { 0x52, "R2.1" }, |
| { 0x53, "R3.0" }, |
| #endif |
| { 0x00, NULL } |
| }; |
| |
| static const struct id_to_str arc_cpu_rel[] = { |
| /* UARCH.MAJOR, Release */ |
| { 0, "R3.10a"}, |
| { 1, "R3.50a"}, |
| { 0xFF, NULL } |
| }; |
| |
| static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu) |
| { |
| if (is_isa_arcompact()) { |
| struct bcr_iccm_arcompact iccm; |
| struct bcr_dccm_arcompact dccm; |
| |
| READ_BCR(ARC_REG_ICCM_BUILD, iccm); |
| if (iccm.ver) { |
| cpu->iccm.sz = 4096 << iccm.sz; /* 8K to 512K */ |
| cpu->iccm.base_addr = iccm.base << 16; |
| } |
| |
| READ_BCR(ARC_REG_DCCM_BUILD, dccm); |
| if (dccm.ver) { |
| unsigned long base; |
| cpu->dccm.sz = 2048 << dccm.sz; /* 2K to 256K */ |
| |
| base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD); |
| cpu->dccm.base_addr = base & ~0xF; |
| } |
| } else { |
| struct bcr_iccm_arcv2 iccm; |
| struct bcr_dccm_arcv2 dccm; |
| unsigned long region; |
| |
| READ_BCR(ARC_REG_ICCM_BUILD, iccm); |
| if (iccm.ver) { |
| cpu->iccm.sz = 256 << iccm.sz00; /* 512B to 16M */ |
| if (iccm.sz00 == 0xF && iccm.sz01 > 0) |
| cpu->iccm.sz <<= iccm.sz01; |
| |
| region = read_aux_reg(ARC_REG_AUX_ICCM); |
| cpu->iccm.base_addr = region & 0xF0000000; |
| } |
| |
| READ_BCR(ARC_REG_DCCM_BUILD, dccm); |
| if (dccm.ver) { |
| cpu->dccm.sz = 256 << dccm.sz0; |
| if (dccm.sz0 == 0xF && dccm.sz1 > 0) |
| cpu->dccm.sz <<= dccm.sz1; |
| |
| region = read_aux_reg(ARC_REG_AUX_DCCM); |
| cpu->dccm.base_addr = region & 0xF0000000; |
| } |
| } |
| } |
| |
| static void decode_arc_core(struct cpuinfo_arc *cpu) |
| { |
| struct bcr_uarch_build_arcv2 uarch; |
| const struct id_to_str *tbl; |
| |
| /* |
| * Up until (including) the first core4 release (0x54) things were |
| * simple: AUX IDENTITY.ARCVER was sufficient to identify arc family |
| * and release: 0x50 to 0x53 was HS38, 0x54 was HS48 (dual issue) |
| */ |
| |
| if (cpu->core.family < 0x54) { /* includes arc700 */ |
| |
| for (tbl = &arc_legacy_rel[0]; tbl->id != 0; tbl++) { |
| if (cpu->core.family == tbl->id) { |
| cpu->release = tbl->str; |
| break; |
| } |
| } |
| |
| if (is_isa_arcompact()) |
| cpu->name = "ARC700"; |
| else if (tbl->str) |
| cpu->name = "HS38"; |
| else |
| cpu->name = cpu->release = "Unknown"; |
| |
| return; |
| } |
| |
| /* |
| * However the subsequent HS release (same 0x54) allow HS38 or HS48 |
| * configurations and encode this info in a different BCR. |
| * The BCR was introduced in 0x54 so can't be read unconditionally. |
| */ |
| |
| READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch); |
| |
| if (uarch.prod == 4) { |
| cpu->name = "HS48"; |
| cpu->extn.dual = 1; |
| |
| } else { |
| cpu->name = "HS38"; |
| } |
| |
| for (tbl = &arc_cpu_rel[0]; tbl->id != 0xFF; tbl++) { |
| if (uarch.maj == tbl->id) { |
| cpu->release = tbl->str; |
| break; |
| } |
| } |
| } |
| |
| static void read_arc_build_cfg_regs(void) |
| { |
| struct bcr_timer timer; |
| struct bcr_generic bcr; |
| struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; |
| struct bcr_isa_arcv2 isa; |
| struct bcr_actionpoint ap; |
| |
| FIX_PTR(cpu); |
| |
| READ_BCR(AUX_IDENTITY, cpu->core); |
| decode_arc_core(cpu); |
| |
| READ_BCR(ARC_REG_TIMERS_BCR, timer); |
| cpu->extn.timer0 = timer.t0; |
| cpu->extn.timer1 = timer.t1; |
| cpu->extn.rtc = timer.rtc; |
| |
| cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE); |
| |
| READ_BCR(ARC_REG_MUL_BCR, cpu->extn_mpy); |
| |
| /* Read CCM BCRs for boot reporting even if not enabled in Kconfig */ |
| read_decode_ccm_bcr(cpu); |
| |
| read_decode_mmu_bcr(); |
| read_decode_cache_bcr(); |
| |
| if (is_isa_arcompact()) { |
| struct bcr_fp_arcompact sp, dp; |
| struct bcr_bpu_arcompact bpu; |
| |
| READ_BCR(ARC_REG_FP_BCR, sp); |
| READ_BCR(ARC_REG_DPFP_BCR, dp); |
| cpu->extn.fpu_sp = sp.ver ? 1 : 0; |
| cpu->extn.fpu_dp = dp.ver ? 1 : 0; |
| |
| READ_BCR(ARC_REG_BPU_BCR, bpu); |
| cpu->bpu.ver = bpu.ver; |
| cpu->bpu.full = bpu.fam ? 1 : 0; |
| if (bpu.ent) { |
| cpu->bpu.num_cache = 256 << (bpu.ent - 1); |
| cpu->bpu.num_pred = 256 << (bpu.ent - 1); |
| } |
| } else { |
| struct bcr_fp_arcv2 spdp; |
| struct bcr_bpu_arcv2 bpu; |
| |
| READ_BCR(ARC_REG_FP_V2_BCR, spdp); |
| cpu->extn.fpu_sp = spdp.sp ? 1 : 0; |
| cpu->extn.fpu_dp = spdp.dp ? 1 : 0; |
| |
| READ_BCR(ARC_REG_BPU_BCR, bpu); |
| cpu->bpu.ver = bpu.ver; |
| cpu->bpu.full = bpu.ft; |
| cpu->bpu.num_cache = 256 << bpu.bce; |
| cpu->bpu.num_pred = 2048 << bpu.pte; |
| cpu->bpu.ret_stk = 4 << bpu.rse; |
| |
| /* if dual issue hardware, is it enabled ? */ |
| if (cpu->extn.dual) { |
| unsigned int exec_ctrl; |
| |
| READ_BCR(AUX_EXEC_CTRL, exec_ctrl); |
| cpu->extn.dual_enb = !(exec_ctrl & 1); |
| } |
| } |
| |
| READ_BCR(ARC_REG_AP_BCR, ap); |
| if (ap.ver) { |
| cpu->extn.ap_num = 2 << ap.num; |
| cpu->extn.ap_full = !ap.min; |
| } |
| |
| READ_BCR(ARC_REG_SMART_BCR, bcr); |
| cpu->extn.smart = bcr.ver ? 1 : 0; |
| |
| READ_BCR(ARC_REG_RTT_BCR, bcr); |
| cpu->extn.rtt = bcr.ver ? 1 : 0; |
| |
| READ_BCR(ARC_REG_ISA_CFG_BCR, isa); |
| |
| /* some hacks for lack of feature BCR info in old ARC700 cores */ |
| if (is_isa_arcompact()) { |
| if (!isa.ver) /* ISA BCR absent, use Kconfig info */ |
| cpu->isa.atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC); |
| else { |
| /* ARC700_BUILD only has 2 bits of isa info */ |
| struct bcr_generic bcr = *(struct bcr_generic *)&isa; |
| cpu->isa.atomic = bcr.info & 1; |
| } |
| |
| cpu->isa.be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN); |
| |
| /* there's no direct way to distinguish 750 vs. 770 */ |
| if (unlikely(cpu->core.family < 0x34 || cpu->mmu.ver < 3)) |
| cpu->name = "ARC750"; |
| } else { |
| cpu->isa = isa; |
| } |
| } |
| |
| static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len) |
| { |
| struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id]; |
| struct bcr_identity *core = &cpu->core; |
| char mpy_opt[16]; |
| int n = 0; |
| |
| FIX_PTR(cpu); |
| |
| n += scnprintf(buf + n, len - n, |
| "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n", |
| core->family, core->cpu_id, core->chip_id); |
| |
| n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n", |
| cpu_id, cpu->name, cpu->release, |
| is_isa_arcompact() ? "ARCompact" : "ARCv2", |
| IS_AVAIL1(cpu->isa.be, "[Big-Endian]"), |
| IS_AVAIL3(cpu->extn.dual, cpu->extn.dual_enb, " Dual-Issue ")); |
| |
| n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s%s%s\nISA Extn\t: ", |
| IS_AVAIL1(cpu->extn.timer0, "Timer0 "), |
| IS_AVAIL1(cpu->extn.timer1, "Timer1 "), |
| IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT), |
| IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT)); |
| |
| if (cpu->extn_mpy.ver) { |
| if (is_isa_arcompact()) { |
| scnprintf(mpy_opt, 16, "mpy"); |
| } else { |
| |
| int opt = 2; /* stock MPY/MPYH */ |
| |
| if (cpu->extn_mpy.dsp) /* OPT 7-9 */ |
| opt = cpu->extn_mpy.dsp + 6; |
| |
| scnprintf(mpy_opt, 16, "mpy[opt %d] ", opt); |
| } |
| } |
| |
| n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n", |
| IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC), |
| IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64), |
| IS_AVAIL2(cpu->isa.unalign, "unalign ", CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS), |
| IS_AVAIL1(cpu->extn_mpy.ver, mpy_opt), |
| IS_AVAIL1(cpu->isa.div_rem, "div_rem ")); |
| |
| if (cpu->bpu.ver) { |
| n += scnprintf(buf + n, len - n, |
| "BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d", |
| IS_AVAIL1(cpu->bpu.full, "full"), |
| IS_AVAIL1(!cpu->bpu.full, "partial"), |
| cpu->bpu.num_cache, cpu->bpu.num_pred, cpu->bpu.ret_stk); |
| |
| if (is_isa_arcv2()) { |
| struct bcr_lpb lpb; |
| |
| READ_BCR(ARC_REG_LPB_BUILD, lpb); |
| if (lpb.ver) { |
| unsigned int ctl; |
| ctl = read_aux_reg(ARC_REG_LPB_CTRL); |
| |
| n += scnprintf(buf + n, len - n, " Loop Buffer:%d %s", |
| lpb.entries, |
| IS_DISABLED_RUN(!ctl)); |
| } |
| } |
| n += scnprintf(buf + n, len - n, "\n"); |
| } |
| |
| return buf; |
| } |
| |
| static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len) |
| { |
| int n = 0; |
| struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id]; |
| |
| FIX_PTR(cpu); |
| |
| n += scnprintf(buf + n, len - n, "Vector Table\t: %#x\n", cpu->vec_base); |
| |
| if (cpu->extn.fpu_sp || cpu->extn.fpu_dp) |
| n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n", |
| IS_AVAIL1(cpu->extn.fpu_sp, "SP "), |
| IS_AVAIL1(cpu->extn.fpu_dp, "DP ")); |
| |
| if (cpu->extn.ap_num | cpu->extn.smart | cpu->extn.rtt) { |
| n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s", |
| IS_AVAIL1(cpu->extn.smart, "smaRT "), |
| IS_AVAIL1(cpu->extn.rtt, "RTT ")); |
| if (cpu->extn.ap_num) { |
| n += scnprintf(buf + n, len - n, "ActionPoint %d/%s", |
| cpu->extn.ap_num, |
| cpu->extn.ap_full ? "full":"min"); |
| } |
| n += scnprintf(buf + n, len - n, "\n"); |
| } |
| |
| if (cpu->dccm.sz || cpu->iccm.sz) |
| n += scnprintf(buf + n, len - n, "Extn [CCM]\t: DCCM @ %x, %d KB / ICCM: @ %x, %d KB\n", |
| cpu->dccm.base_addr, TO_KB(cpu->dccm.sz), |
| cpu->iccm.base_addr, TO_KB(cpu->iccm.sz)); |
| |
| if (is_isa_arcv2()) { |
| |
| /* Error Protection: ECC/Parity */ |
| struct bcr_erp erp; |
| READ_BCR(ARC_REG_ERP_BUILD, erp); |
| |
| if (erp.ver) { |
| struct ctl_erp ctl; |
| READ_BCR(ARC_REG_ERP_CTRL, ctl); |
| |
| /* inverted bits: 0 means enabled */ |
| n += scnprintf(buf + n, len - n, "Extn [ECC]\t: %s%s%s%s%s%s\n", |
| IS_AVAIL3(erp.ic, !ctl.dpi, "IC "), |
| IS_AVAIL3(erp.dc, !ctl.dpd, "DC "), |
| IS_AVAIL3(erp.mmu, !ctl.mpd, "MMU ")); |
| } |
| } |
| |
| return buf; |
| } |
| |
| void chk_opt_strict(char *opt_name, bool hw_exists, bool opt_ena) |
| { |
| if (hw_exists && !opt_ena) |
| pr_warn(" ! Enable %s for working apps\n", opt_name); |
| else if (!hw_exists && opt_ena) |
| panic("Disable %s, hardware NOT present\n", opt_name); |
| } |
| |
| void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena) |
| { |
| if (!hw_exists && opt_ena) |
| panic("Disable %s, hardware NOT present\n", opt_name); |
| } |
| |
| static void arc_chk_core_config(void) |
| { |
| struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; |
| int present = 0; |
| |
| if (!cpu->extn.timer0) |
| panic("Timer0 is not present!\n"); |
| |
| if (!cpu->extn.timer1) |
| panic("Timer1 is not present!\n"); |
| |
| #ifdef CONFIG_ARC_HAS_DCCM |
| /* |
| * DCCM can be arbit placed in hardware. |
| * Make sure it's placement/sz matches what Linux is built with |
| */ |
| if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr) |
| panic("Linux built with incorrect DCCM Base address\n"); |
| |
| if (CONFIG_ARC_DCCM_SZ * SZ_1K != cpu->dccm.sz) |
| panic("Linux built with incorrect DCCM Size\n"); |
| #endif |
| |
| #ifdef CONFIG_ARC_HAS_ICCM |
| if (CONFIG_ARC_ICCM_SZ * SZ_1K != cpu->iccm.sz) |
| panic("Linux built with incorrect ICCM Size\n"); |
| #endif |
| |
| /* |
| * FP hardware/software config sanity |
| * -If hardware present, kernel needs to save/restore FPU state |
| * -If not, it will crash trying to save/restore the non-existant regs |
| */ |
| |
| if (is_isa_arcompact()) { |
| /* only DPDP checked since SP has no arch visible regs */ |
| present = cpu->extn.fpu_dp; |
| CHK_OPT_STRICT(CONFIG_ARC_FPU_SAVE_RESTORE, present); |
| } else { |
| /* Accumulator Low:High pair (r58:59) present if DSP MPY or FPU */ |
| present = cpu->extn_mpy.dsp | cpu->extn.fpu_sp | cpu->extn.fpu_dp; |
| CHK_OPT_STRICT(CONFIG_ARC_HAS_ACCL_REGS, present); |
| |
| dsp_config_check(); |
| } |
| } |
| |
| /* |
| * Initialize and setup the processor core |
| * This is called by all the CPUs thus should not do special case stuff |
| * such as only for boot CPU etc |
| */ |
| |
| void setup_processor(void) |
| { |
| char str[512]; |
| int cpu_id = smp_processor_id(); |
| |
| read_arc_build_cfg_regs(); |
| arc_init_IRQ(); |
| |
| pr_info("%s", arc_cpu_mumbojumbo(cpu_id, str, sizeof(str))); |
| |
| arc_mmu_init(); |
| arc_cache_init(); |
| |
| pr_info("%s", arc_extn_mumbojumbo(cpu_id, str, sizeof(str))); |
| pr_info("%s", arc_platform_smp_cpuinfo()); |
| |
| arc_chk_core_config(); |
| } |
| |
| static inline bool uboot_arg_invalid(unsigned long addr) |
| { |
| /* |
| * Check that it is a untranslated address (although MMU is not enabled |
| * yet, it being a high address ensures this is not by fluke) |
| */ |
| if (addr < PAGE_OFFSET) |
| return true; |
| |
| /* Check that address doesn't clobber resident kernel image */ |
| return addr >= (unsigned long)_stext && addr <= (unsigned long)_end; |
| } |
| |
| #define IGNORE_ARGS "Ignore U-boot args: " |
| |
| /* uboot_tag values for U-boot - kernel ABI revision 0; see head.S */ |
| #define UBOOT_TAG_NONE 0 |
| #define UBOOT_TAG_CMDLINE 1 |
| #define UBOOT_TAG_DTB 2 |
| /* We always pass 0 as magic from U-boot */ |
| #define UBOOT_MAGIC_VALUE 0 |
| |
| void __init handle_uboot_args(void) |
| { |
| bool use_embedded_dtb = true; |
| bool append_cmdline = false; |
| |
| /* check that we know this tag */ |
| if (uboot_tag != UBOOT_TAG_NONE && |
| uboot_tag != UBOOT_TAG_CMDLINE && |
| uboot_tag != UBOOT_TAG_DTB) { |
| pr_warn(IGNORE_ARGS "invalid uboot tag: '%08x'\n", uboot_tag); |
| goto ignore_uboot_args; |
| } |
| |
| if (uboot_magic != UBOOT_MAGIC_VALUE) { |
| pr_warn(IGNORE_ARGS "non zero uboot magic\n"); |
| goto ignore_uboot_args; |
| } |
| |
| if (uboot_tag != UBOOT_TAG_NONE && |
| uboot_arg_invalid((unsigned long)uboot_arg)) { |
| pr_warn(IGNORE_ARGS "invalid uboot arg: '%px'\n", uboot_arg); |
| goto ignore_uboot_args; |
| } |
| |
| /* see if U-boot passed an external Device Tree blob */ |
| if (uboot_tag == UBOOT_TAG_DTB) { |
| machine_desc = setup_machine_fdt((void *)uboot_arg); |
| |
| /* external Device Tree blob is invalid - use embedded one */ |
| use_embedded_dtb = !machine_desc; |
| } |
| |
| if (uboot_tag == UBOOT_TAG_CMDLINE) |
| append_cmdline = true; |
| |
| ignore_uboot_args: |
| |
| if (use_embedded_dtb) { |
| machine_desc = setup_machine_fdt(__dtb_start); |
| if (!machine_desc) |
| panic("Embedded DT invalid\n"); |
| } |
| |
| /* |
| * NOTE: @boot_command_line is populated by setup_machine_fdt() so this |
| * append processing can only happen after. |
| */ |
| if (append_cmdline) { |
| /* Ensure a whitespace between the 2 cmdlines */ |
| strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); |
| strlcat(boot_command_line, uboot_arg, COMMAND_LINE_SIZE); |
| } |
| } |
| |
| void __init setup_arch(char **cmdline_p) |
| { |
| handle_uboot_args(); |
| |
| /* Save unparsed command line copy for /proc/cmdline */ |
| *cmdline_p = boot_command_line; |
| |
| /* To force early parsing of things like mem=xxx */ |
| parse_early_param(); |
| |
| /* Platform/board specific: e.g. early console registration */ |
| if (machine_desc->init_early) |
| machine_desc->init_early(); |
| |
| smp_init_cpus(); |
| |
| setup_processor(); |
| setup_arch_memory(); |
| |
| /* copy flat DT out of .init and then unflatten it */ |
| unflatten_and_copy_device_tree(); |
| |
| /* Can be issue if someone passes cmd line arg "ro" |
| * But that is unlikely so keeping it as it is |
| */ |
| root_mountflags &= ~MS_RDONLY; |
| |
| arc_unwind_init(); |
| } |
| |
| /* |
| * Called from start_kernel() - boot CPU only |
| */ |
| void __init time_init(void) |
| { |
| of_clk_init(NULL); |
| timer_probe(); |
| } |
| |
| static int __init customize_machine(void) |
| { |
| if (machine_desc->init_machine) |
| machine_desc->init_machine(); |
| |
| return 0; |
| } |
| arch_initcall(customize_machine); |
| |
| static int __init init_late_machine(void) |
| { |
| if (machine_desc->init_late) |
| machine_desc->init_late(); |
| |
| return 0; |
| } |
| late_initcall(init_late_machine); |
| /* |
| * Get CPU information for use by the procfs. |
| */ |
| |
| #define cpu_to_ptr(c) ((void *)(0xFFFF0000 | (unsigned int)(c))) |
| #define ptr_to_cpu(p) (~0xFFFF0000UL & (unsigned int)(p)) |
| |
| static int show_cpuinfo(struct seq_file *m, void *v) |
| { |
| char *str; |
| int cpu_id = ptr_to_cpu(v); |
| struct device *cpu_dev = get_cpu_device(cpu_id); |
| struct clk *cpu_clk; |
| unsigned long freq = 0; |
| |
| if (!cpu_online(cpu_id)) { |
| seq_printf(m, "processor [%d]\t: Offline\n", cpu_id); |
| goto done; |
| } |
| |
| str = (char *)__get_free_page(GFP_KERNEL); |
| if (!str) |
| goto done; |
| |
| seq_printf(m, arc_cpu_mumbojumbo(cpu_id, str, PAGE_SIZE)); |
| |
| cpu_clk = clk_get(cpu_dev, NULL); |
| if (IS_ERR(cpu_clk)) { |
| seq_printf(m, "CPU speed \t: Cannot get clock for processor [%d]\n", |
| cpu_id); |
| } else { |
| freq = clk_get_rate(cpu_clk); |
| } |
| if (freq) |
| seq_printf(m, "CPU speed\t: %lu.%02lu Mhz\n", |
| freq / 1000000, (freq / 10000) % 100); |
| |
| seq_printf(m, "Bogo MIPS\t: %lu.%02lu\n", |
| loops_per_jiffy / (500000 / HZ), |
| (loops_per_jiffy / (5000 / HZ)) % 100); |
| |
| seq_printf(m, arc_mmu_mumbojumbo(cpu_id, str, PAGE_SIZE)); |
| seq_printf(m, arc_cache_mumbojumbo(cpu_id, str, PAGE_SIZE)); |
| seq_printf(m, arc_extn_mumbojumbo(cpu_id, str, PAGE_SIZE)); |
| seq_printf(m, arc_platform_smp_cpuinfo()); |
| |
| free_page((unsigned long)str); |
| done: |
| seq_printf(m, "\n"); |
| |
| return 0; |
| } |
| |
| static void *c_start(struct seq_file *m, loff_t *pos) |
| { |
| /* |
| * Callback returns cpu-id to iterator for show routine, NULL to stop. |
| * However since NULL is also a valid cpu-id (0), we use a round-about |
| * way to pass it w/o having to kmalloc/free a 2 byte string. |
| * Encode cpu-id as 0xFFcccc, which is decoded by show routine. |
| */ |
| return *pos < nr_cpu_ids ? cpu_to_ptr(*pos) : NULL; |
| } |
| |
| static void *c_next(struct seq_file *m, void *v, loff_t *pos) |
| { |
| ++*pos; |
| return c_start(m, pos); |
| } |
| |
| static void c_stop(struct seq_file *m, void *v) |
| { |
| } |
| |
| const struct seq_operations cpuinfo_op = { |
| .start = c_start, |
| .next = c_next, |
| .stop = c_stop, |
| .show = show_cpuinfo |
| }; |
| |
| static DEFINE_PER_CPU(struct cpu, cpu_topology); |
| |
| static int __init topology_init(void) |
| { |
| int cpu; |
| |
| for_each_present_cpu(cpu) |
| register_cpu(&per_cpu(cpu_topology, cpu), cpu); |
| |
| return 0; |
| } |
| |
| subsys_initcall(topology_init); |