| // SPDX-License-Identifier: GPL-2.0 OR MIT |
| /* |
| * Copyright 2014 Carlo Caione <carlo@caione.org> |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&gic>; |
| |
| L2: l2-cache-controller@c4200000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0xc4200000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| cbus: cbus@c1100000 { |
| compatible = "simple-bus"; |
| reg = <0xc1100000 0x200000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xc1100000 0x200000>; |
| |
| hhi: system-controller@4000 { |
| compatible = "amlogic,meson-hhi-sysctrl", |
| "simple-mfd", |
| "syscon"; |
| reg = <0x4000 0x400>; |
| }; |
| |
| assist: assist@7c00 { |
| compatible = "amlogic,meson-mx-assist", "syscon"; |
| reg = <0x7c00 0x200>; |
| }; |
| |
| hwrng: rng@8100 { |
| compatible = "amlogic,meson-rng"; |
| reg = <0x8100 0x8>; |
| }; |
| |
| uart_A: serial@84c0 { |
| compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; |
| reg = <0x84c0 0x18>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| uart_B: serial@84dc { |
| compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; |
| reg = <0x84dc 0x18>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| i2c_A: i2c@8500 { |
| compatible = "amlogic,meson6-i2c"; |
| reg = <0x8500 0x20>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| pwm_ab: pwm@8550 { |
| compatible = "amlogic,meson-pwm"; |
| reg = <0x8550 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm_cd: pwm@8650 { |
| compatible = "amlogic,meson-pwm"; |
| reg = <0x8650 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| saradc: adc@8680 { |
| compatible = "amlogic,meson-saradc"; |
| reg = <0x8680 0x34>; |
| #io-channel-cells = <1>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| uart_C: serial@8700 { |
| compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; |
| reg = <0x8700 0x18>; |
| interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| i2c_B: i2c@87c0 { |
| compatible = "amlogic,meson6-i2c"; |
| reg = <0x87c0 0x20>; |
| interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| usb0_phy: phy@8800 { |
| compatible = "amlogic,meson-mx-usb2-phy"; |
| #phy-cells = <0>; |
| reg = <0x8800 0x20>; |
| status = "disabled"; |
| }; |
| |
| usb1_phy: phy@8820 { |
| compatible = "amlogic,meson-mx-usb2-phy"; |
| #phy-cells = <0>; |
| reg = <0x8820 0x20>; |
| status = "disabled"; |
| }; |
| |
| sdio: mmc@8c20 { |
| compatible = "amlogic,meson-mx-sdio"; |
| reg = <0x8c20 0x20>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spifc: spi@8c80 { |
| compatible = "amlogic,meson6-spifc"; |
| reg = <0x8c80 0x80>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| gpio_intc: interrupt-controller@9880 { |
| compatible = "amlogic,meson-gpio-intc"; |
| reg = <0x9880 0x10>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; |
| status = "disabled"; |
| }; |
| |
| wdt: watchdog@9900 { |
| compatible = "amlogic,meson6-wdt"; |
| reg = <0x9900 0x8>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| timer_abcde: timer@9940 { |
| compatible = "amlogic,meson6-timer"; |
| reg = <0x9940 0x18>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; |
| }; |
| }; |
| |
| periph: bus@c4300000 { |
| compatible = "simple-bus"; |
| reg = <0xc4300000 0x10000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xc4300000 0x10000>; |
| |
| gic: interrupt-controller@1000 { |
| compatible = "arm,cortex-a9-gic"; |
| reg = <0x1000 0x1000>, |
| <0x100 0x100>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| }; |
| }; |
| |
| aobus: aobus@c8100000 { |
| compatible = "simple-bus"; |
| reg = <0xc8100000 0x100000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xc8100000 0x100000>; |
| |
| ir_receiver: ir-receiver@480 { |
| compatible= "amlogic,meson6-ir"; |
| reg = <0x480 0x20>; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| uart_AO: serial@4c0 { |
| compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; |
| reg = <0x4c0 0x18>; |
| interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; |
| status = "disabled"; |
| }; |
| |
| i2c_AO: i2c@500 { |
| compatible = "amlogic,meson6-i2c"; |
| reg = <0x500 0x20>; |
| interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| rtc: rtc@740 { |
| compatible = "amlogic,meson6-rtc"; |
| reg = <0x740 0x14>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usb0: usb@c9040000 { |
| compatible = "snps,dwc2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc9040000 0x40000>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usb0_phy>; |
| phy-names = "usb2-phy"; |
| g-rx-fifo-size = <512>; |
| g-np-tx-fifo-size = <500>; |
| g-tx-fifo-size = <256 192 128 128 128>; |
| dr_mode = "host"; |
| status = "disabled"; |
| }; |
| |
| usb1: usb@c90c0000 { |
| compatible = "snps,dwc2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc90c0000 0x40000>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usb1_phy>; |
| phy-names = "usb2-phy"; |
| dr_mode = "host"; |
| status = "disabled"; |
| }; |
| |
| ethmac: ethernet@c9410000 { |
| compatible = "amlogic,meson6-dwmac", "snps,dwmac"; |
| reg = <0xc9410000 0x10000 |
| 0xc1108108 0x4>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| status = "disabled"; |
| }; |
| |
| ahb_sram: sram@d9000000 { |
| compatible = "mmio-sram"; |
| reg = <0xd9000000 0x20000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0xd9000000 0x20000>; |
| }; |
| |
| bootrom: bootrom@d9040000 { |
| compatible = "amlogic,meson-mx-bootrom", "syscon"; |
| reg = <0xd9040000 0x10000>; |
| }; |
| |
| secbus: secbus@da000000 { |
| compatible = "simple-bus"; |
| reg = <0xda000000 0x6000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xda000000 0x6000>; |
| |
| efuse: nvmem@0 { |
| compatible = "amlogic,meson6-efuse"; |
| reg = <0x0 0x2000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| }; |
| }; |
| |
| xtal: xtal-clk { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "xtal"; |
| #clock-cells = <0>; |
| }; |
| }; /* end of / */ |
