| // SPDX-License-Identifier: GPL-2.0 |
| |
| /* |
| * Copyright 2016-2019 HabanaLabs, Ltd. |
| * All Rights Reserved. |
| */ |
| |
| #include "habanalabs.h" |
| #include "include/hl_boot_if.h" |
| |
| #include <linux/firmware.h> |
| #include <linux/genalloc.h> |
| #include <linux/io-64-nonatomic-lo-hi.h> |
| #include <linux/slab.h> |
| |
| /** |
| * hl_fw_load_fw_to_device() - Load F/W code to device's memory. |
| * @hdev: pointer to hl_device structure. |
| * |
| * Copy fw code from firmware file to device memory. |
| * |
| * Return: 0 on success, non-zero for failure. |
| */ |
| int hl_fw_load_fw_to_device(struct hl_device *hdev, const char *fw_name, |
| void __iomem *dst) |
| { |
| const struct firmware *fw; |
| const u64 *fw_data; |
| size_t fw_size; |
| int rc; |
| |
| rc = request_firmware(&fw, fw_name, hdev->dev); |
| if (rc) { |
| dev_err(hdev->dev, "Firmware file %s is not found!\n", fw_name); |
| goto out; |
| } |
| |
| fw_size = fw->size; |
| if ((fw_size % 4) != 0) { |
| dev_err(hdev->dev, "Illegal %s firmware size %zu\n", |
| fw_name, fw_size); |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| dev_dbg(hdev->dev, "%s firmware size == %zu\n", fw_name, fw_size); |
| |
| fw_data = (const u64 *) fw->data; |
| |
| memcpy_toio(dst, fw_data, fw_size); |
| |
| out: |
| release_firmware(fw); |
| return rc; |
| } |
| |
| int hl_fw_send_pci_access_msg(struct hl_device *hdev, u32 opcode) |
| { |
| struct armcp_packet pkt = {}; |
| |
| pkt.ctl = cpu_to_le32(opcode << ARMCP_PKT_CTL_OPCODE_SHIFT); |
| |
| return hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, |
| sizeof(pkt), HL_DEVICE_TIMEOUT_USEC, NULL); |
| } |
| |
| int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg, |
| u16 len, u32 timeout, long *result) |
| { |
| struct armcp_packet *pkt; |
| dma_addr_t pkt_dma_addr; |
| u32 tmp; |
| int rc = 0; |
| |
| pkt = hdev->asic_funcs->cpu_accessible_dma_pool_alloc(hdev, len, |
| &pkt_dma_addr); |
| if (!pkt) { |
| dev_err(hdev->dev, |
| "Failed to allocate DMA memory for packet to CPU\n"); |
| return -ENOMEM; |
| } |
| |
| memcpy(pkt, msg, len); |
| |
| mutex_lock(&hdev->send_cpu_message_lock); |
| |
| if (hdev->disabled) |
| goto out; |
| |
| if (hdev->device_cpu_disabled) { |
| rc = -EIO; |
| goto out; |
| } |
| |
| rc = hl_hw_queue_send_cb_no_cmpl(hdev, hw_queue_id, len, pkt_dma_addr); |
| if (rc) { |
| dev_err(hdev->dev, "Failed to send CB on CPU PQ (%d)\n", rc); |
| goto out; |
| } |
| |
| rc = hl_poll_timeout_memory(hdev, &pkt->fence, tmp, |
| (tmp == ARMCP_PACKET_FENCE_VAL), 1000, |
| timeout, true); |
| |
| hl_hw_queue_inc_ci_kernel(hdev, hw_queue_id); |
| |
| if (rc == -ETIMEDOUT) { |
| dev_err(hdev->dev, "Device CPU packet timeout (0x%x)\n", tmp); |
| hdev->device_cpu_disabled = true; |
| goto out; |
| } |
| |
| tmp = le32_to_cpu(pkt->ctl); |
| |
| rc = (tmp & ARMCP_PKT_CTL_RC_MASK) >> ARMCP_PKT_CTL_RC_SHIFT; |
| if (rc) { |
| dev_err(hdev->dev, "F/W ERROR %d for CPU packet %d\n", |
| rc, |
| (tmp & ARMCP_PKT_CTL_OPCODE_MASK) |
| >> ARMCP_PKT_CTL_OPCODE_SHIFT); |
| rc = -EIO; |
| } else if (result) { |
| *result = (long) le64_to_cpu(pkt->result); |
| } |
| |
| out: |
| mutex_unlock(&hdev->send_cpu_message_lock); |
| |
| hdev->asic_funcs->cpu_accessible_dma_pool_free(hdev, len, pkt); |
| |
| return rc; |
| } |
| |
| int hl_fw_unmask_irq(struct hl_device *hdev, u16 event_type) |
| { |
| struct armcp_packet pkt; |
| long result; |
| int rc; |
| |
| memset(&pkt, 0, sizeof(pkt)); |
| |
| pkt.ctl = cpu_to_le32(ARMCP_PACKET_UNMASK_RAZWI_IRQ << |
| ARMCP_PKT_CTL_OPCODE_SHIFT); |
| pkt.value = cpu_to_le64(event_type); |
| |
| rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt), |
| HL_DEVICE_TIMEOUT_USEC, &result); |
| |
| if (rc) |
| dev_err(hdev->dev, "failed to unmask RAZWI IRQ %d", event_type); |
| |
| return rc; |
| } |
| |
| int hl_fw_unmask_irq_arr(struct hl_device *hdev, const u32 *irq_arr, |
| size_t irq_arr_size) |
| { |
| struct armcp_unmask_irq_arr_packet *pkt; |
| size_t total_pkt_size; |
| long result; |
| int rc; |
| |
| total_pkt_size = sizeof(struct armcp_unmask_irq_arr_packet) + |
| irq_arr_size; |
| |
| /* data should be aligned to 8 bytes in order to ArmCP to copy it */ |
| total_pkt_size = (total_pkt_size + 0x7) & ~0x7; |
| |
| /* total_pkt_size is casted to u16 later on */ |
| if (total_pkt_size > USHRT_MAX) { |
| dev_err(hdev->dev, "too many elements in IRQ array\n"); |
| return -EINVAL; |
| } |
| |
| pkt = kzalloc(total_pkt_size, GFP_KERNEL); |
| if (!pkt) |
| return -ENOMEM; |
| |
| pkt->length = cpu_to_le32(irq_arr_size / sizeof(irq_arr[0])); |
| memcpy(&pkt->irqs, irq_arr, irq_arr_size); |
| |
| pkt->armcp_pkt.ctl = cpu_to_le32(ARMCP_PACKET_UNMASK_RAZWI_IRQ_ARRAY << |
| ARMCP_PKT_CTL_OPCODE_SHIFT); |
| |
| rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) pkt, |
| total_pkt_size, HL_DEVICE_TIMEOUT_USEC, &result); |
| |
| if (rc) |
| dev_err(hdev->dev, "failed to unmask IRQ array\n"); |
| |
| kfree(pkt); |
| |
| return rc; |
| } |
| |
| int hl_fw_test_cpu_queue(struct hl_device *hdev) |
| { |
| struct armcp_packet test_pkt = {}; |
| long result; |
| int rc; |
| |
| test_pkt.ctl = cpu_to_le32(ARMCP_PACKET_TEST << |
| ARMCP_PKT_CTL_OPCODE_SHIFT); |
| test_pkt.value = cpu_to_le64(ARMCP_PACKET_FENCE_VAL); |
| |
| rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &test_pkt, |
| sizeof(test_pkt), HL_DEVICE_TIMEOUT_USEC, &result); |
| |
| if (!rc) { |
| if (result != ARMCP_PACKET_FENCE_VAL) |
| dev_err(hdev->dev, |
| "CPU queue test failed (0x%08lX)\n", result); |
| } else { |
| dev_err(hdev->dev, "CPU queue test failed, error %d\n", rc); |
| } |
| |
| return rc; |
| } |
| |
| void *hl_fw_cpu_accessible_dma_pool_alloc(struct hl_device *hdev, size_t size, |
| dma_addr_t *dma_handle) |
| { |
| u64 kernel_addr; |
| |
| kernel_addr = gen_pool_alloc(hdev->cpu_accessible_dma_pool, size); |
| |
| *dma_handle = hdev->cpu_accessible_dma_address + |
| (kernel_addr - (u64) (uintptr_t) hdev->cpu_accessible_dma_mem); |
| |
| return (void *) (uintptr_t) kernel_addr; |
| } |
| |
| void hl_fw_cpu_accessible_dma_pool_free(struct hl_device *hdev, size_t size, |
| void *vaddr) |
| { |
| gen_pool_free(hdev->cpu_accessible_dma_pool, (u64) (uintptr_t) vaddr, |
| size); |
| } |
| |
| int hl_fw_send_heartbeat(struct hl_device *hdev) |
| { |
| struct armcp_packet hb_pkt = {}; |
| long result; |
| int rc; |
| |
| hb_pkt.ctl = cpu_to_le32(ARMCP_PACKET_TEST << |
| ARMCP_PKT_CTL_OPCODE_SHIFT); |
| hb_pkt.value = cpu_to_le64(ARMCP_PACKET_FENCE_VAL); |
| |
| rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &hb_pkt, |
| sizeof(hb_pkt), HL_DEVICE_TIMEOUT_USEC, &result); |
| |
| if ((rc) || (result != ARMCP_PACKET_FENCE_VAL)) |
| rc = -EIO; |
| |
| return rc; |
| } |
| |
| int hl_fw_armcp_info_get(struct hl_device *hdev) |
| { |
| struct asic_fixed_properties *prop = &hdev->asic_prop; |
| struct armcp_packet pkt = {}; |
| void *armcp_info_cpu_addr; |
| dma_addr_t armcp_info_dma_addr; |
| long result; |
| int rc; |
| |
| armcp_info_cpu_addr = |
| hdev->asic_funcs->cpu_accessible_dma_pool_alloc(hdev, |
| sizeof(struct armcp_info), |
| &armcp_info_dma_addr); |
| if (!armcp_info_cpu_addr) { |
| dev_err(hdev->dev, |
| "Failed to allocate DMA memory for ArmCP info packet\n"); |
| return -ENOMEM; |
| } |
| |
| memset(armcp_info_cpu_addr, 0, sizeof(struct armcp_info)); |
| |
| pkt.ctl = cpu_to_le32(ARMCP_PACKET_INFO_GET << |
| ARMCP_PKT_CTL_OPCODE_SHIFT); |
| pkt.addr = cpu_to_le64(armcp_info_dma_addr); |
| pkt.data_max_size = cpu_to_le32(sizeof(struct armcp_info)); |
| |
| rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt), |
| HL_ARMCP_INFO_TIMEOUT_USEC, &result); |
| if (rc) { |
| dev_err(hdev->dev, |
| "Failed to send ArmCP info pkt, error %d\n", rc); |
| goto out; |
| } |
| |
| memcpy(&prop->armcp_info, armcp_info_cpu_addr, |
| sizeof(prop->armcp_info)); |
| |
| rc = hl_build_hwmon_channel_info(hdev, prop->armcp_info.sensors); |
| if (rc) { |
| dev_err(hdev->dev, |
| "Failed to build hwmon channel info, error %d\n", rc); |
| rc = -EFAULT; |
| goto out; |
| } |
| |
| out: |
| hdev->asic_funcs->cpu_accessible_dma_pool_free(hdev, |
| sizeof(struct armcp_info), armcp_info_cpu_addr); |
| |
| return rc; |
| } |
| |
| int hl_fw_get_eeprom_data(struct hl_device *hdev, void *data, size_t max_size) |
| { |
| struct armcp_packet pkt = {}; |
| void *eeprom_info_cpu_addr; |
| dma_addr_t eeprom_info_dma_addr; |
| long result; |
| int rc; |
| |
| eeprom_info_cpu_addr = |
| hdev->asic_funcs->cpu_accessible_dma_pool_alloc(hdev, |
| max_size, &eeprom_info_dma_addr); |
| if (!eeprom_info_cpu_addr) { |
| dev_err(hdev->dev, |
| "Failed to allocate DMA memory for ArmCP EEPROM packet\n"); |
| return -ENOMEM; |
| } |
| |
| memset(eeprom_info_cpu_addr, 0, max_size); |
| |
| pkt.ctl = cpu_to_le32(ARMCP_PACKET_EEPROM_DATA_GET << |
| ARMCP_PKT_CTL_OPCODE_SHIFT); |
| pkt.addr = cpu_to_le64(eeprom_info_dma_addr); |
| pkt.data_max_size = cpu_to_le32(max_size); |
| |
| rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt), |
| HL_ARMCP_EEPROM_TIMEOUT_USEC, &result); |
| |
| if (rc) { |
| dev_err(hdev->dev, |
| "Failed to send ArmCP EEPROM packet, error %d\n", rc); |
| goto out; |
| } |
| |
| /* result contains the actual size */ |
| memcpy(data, eeprom_info_cpu_addr, min((size_t)result, max_size)); |
| |
| out: |
| hdev->asic_funcs->cpu_accessible_dma_pool_free(hdev, max_size, |
| eeprom_info_cpu_addr); |
| |
| return rc; |
| } |
| |
| static void fw_read_errors(struct hl_device *hdev, u32 boot_err0_reg) |
| { |
| u32 err_val; |
| |
| /* Some of the firmware status codes are deprecated in newer f/w |
| * versions. In those versions, the errors are reported |
| * in different registers. Therefore, we need to check those |
| * registers and print the exact errors. Moreover, there |
| * may be multiple errors, so we need to report on each error |
| * separately. Some of the error codes might indicate a state |
| * that is not an error per-se, but it is an error in production |
| * environment |
| */ |
| err_val = RREG32(boot_err0_reg); |
| if (!(err_val & CPU_BOOT_ERR0_ENABLED)) |
| return; |
| |
| if (err_val & CPU_BOOT_ERR0_DRAM_INIT_FAIL) |
| dev_err(hdev->dev, |
| "Device boot error - DRAM initialization failed\n"); |
| if (err_val & CPU_BOOT_ERR0_FIT_CORRUPTED) |
| dev_err(hdev->dev, "Device boot error - FIT image corrupted\n"); |
| if (err_val & CPU_BOOT_ERR0_TS_INIT_FAIL) |
| dev_err(hdev->dev, |
| "Device boot error - Thermal Sensor initialization failed\n"); |
| if (err_val & CPU_BOOT_ERR0_DRAM_SKIPPED) |
| dev_warn(hdev->dev, |
| "Device boot warning - Skipped DRAM initialization\n"); |
| if (err_val & CPU_BOOT_ERR0_BMC_WAIT_SKIPPED) |
| dev_warn(hdev->dev, |
| "Device boot error - Skipped waiting for BMC\n"); |
| if (err_val & CPU_BOOT_ERR0_NIC_DATA_NOT_RDY) |
| dev_err(hdev->dev, |
| "Device boot error - Serdes data from BMC not available\n"); |
| if (err_val & CPU_BOOT_ERR0_NIC_FW_FAIL) |
| dev_err(hdev->dev, |
| "Device boot error - NIC F/W initialization failed\n"); |
| } |
| |
| int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg, |
| u32 msg_to_cpu_reg, u32 cpu_msg_status_reg, |
| u32 boot_err0_reg, bool skip_bmc, |
| u32 cpu_timeout, u32 boot_fit_timeout) |
| { |
| u32 status; |
| int rc; |
| |
| dev_info(hdev->dev, "Going to wait for device boot (up to %lds)\n", |
| cpu_timeout / USEC_PER_SEC); |
| |
| /* Wait for boot FIT request */ |
| rc = hl_poll_timeout( |
| hdev, |
| cpu_boot_status_reg, |
| status, |
| status == CPU_BOOT_STATUS_WAITING_FOR_BOOT_FIT, |
| 10000, |
| boot_fit_timeout); |
| |
| if (rc) { |
| dev_dbg(hdev->dev, |
| "No boot fit request received, resuming boot\n"); |
| } else { |
| rc = hdev->asic_funcs->load_boot_fit_to_device(hdev); |
| if (rc) |
| goto out; |
| |
| /* Clear device CPU message status */ |
| WREG32(cpu_msg_status_reg, CPU_MSG_CLR); |
| |
| /* Signal device CPU that boot loader is ready */ |
| WREG32(msg_to_cpu_reg, KMD_MSG_FIT_RDY); |
| |
| /* Poll for CPU device ack */ |
| rc = hl_poll_timeout( |
| hdev, |
| cpu_msg_status_reg, |
| status, |
| status == CPU_MSG_OK, |
| 10000, |
| boot_fit_timeout); |
| |
| if (rc) { |
| dev_err(hdev->dev, |
| "Timeout waiting for boot fit load ack\n"); |
| goto out; |
| } |
| |
| /* Clear message */ |
| WREG32(msg_to_cpu_reg, KMD_MSG_NA); |
| } |
| |
| /* Make sure CPU boot-loader is running */ |
| rc = hl_poll_timeout( |
| hdev, |
| cpu_boot_status_reg, |
| status, |
| (status == CPU_BOOT_STATUS_DRAM_RDY) || |
| (status == CPU_BOOT_STATUS_NIC_FW_RDY) || |
| (status == CPU_BOOT_STATUS_READY_TO_BOOT) || |
| (status == CPU_BOOT_STATUS_SRAM_AVAIL), |
| 10000, |
| cpu_timeout); |
| |
| /* Read U-Boot, preboot versions now in case we will later fail */ |
| hdev->asic_funcs->read_device_fw_version(hdev, FW_COMP_UBOOT); |
| hdev->asic_funcs->read_device_fw_version(hdev, FW_COMP_PREBOOT); |
| |
| /* Some of the status codes below are deprecated in newer f/w |
| * versions but we keep them here for backward compatibility |
| */ |
| if (rc) { |
| switch (status) { |
| case CPU_BOOT_STATUS_NA: |
| dev_err(hdev->dev, |
| "Device boot error - BTL did NOT run\n"); |
| break; |
| case CPU_BOOT_STATUS_IN_WFE: |
| dev_err(hdev->dev, |
| "Device boot error - Stuck inside WFE loop\n"); |
| break; |
| case CPU_BOOT_STATUS_IN_BTL: |
| dev_err(hdev->dev, |
| "Device boot error - Stuck in BTL\n"); |
| break; |
| case CPU_BOOT_STATUS_IN_PREBOOT: |
| dev_err(hdev->dev, |
| "Device boot error - Stuck in Preboot\n"); |
| break; |
| case CPU_BOOT_STATUS_IN_SPL: |
| dev_err(hdev->dev, |
| "Device boot error - Stuck in SPL\n"); |
| break; |
| case CPU_BOOT_STATUS_IN_UBOOT: |
| dev_err(hdev->dev, |
| "Device boot error - Stuck in u-boot\n"); |
| break; |
| case CPU_BOOT_STATUS_DRAM_INIT_FAIL: |
| dev_err(hdev->dev, |
| "Device boot error - DRAM initialization failed\n"); |
| break; |
| case CPU_BOOT_STATUS_UBOOT_NOT_READY: |
| dev_err(hdev->dev, |
| "Device boot error - u-boot stopped by user\n"); |
| break; |
| case CPU_BOOT_STATUS_TS_INIT_FAIL: |
| dev_err(hdev->dev, |
| "Device boot error - Thermal Sensor initialization failed\n"); |
| break; |
| default: |
| dev_err(hdev->dev, |
| "Device boot error - Invalid status code %d\n", |
| status); |
| break; |
| } |
| |
| rc = -EIO; |
| goto out; |
| } |
| |
| if (!hdev->fw_loading) { |
| dev_info(hdev->dev, "Skip loading FW\n"); |
| goto out; |
| } |
| |
| if (status == CPU_BOOT_STATUS_SRAM_AVAIL) |
| goto out; |
| |
| dev_info(hdev->dev, |
| "Loading firmware to device, may take some time...\n"); |
| |
| rc = hdev->asic_funcs->load_firmware_to_device(hdev); |
| if (rc) |
| goto out; |
| |
| if (skip_bmc) { |
| WREG32(msg_to_cpu_reg, KMD_MSG_SKIP_BMC); |
| |
| rc = hl_poll_timeout( |
| hdev, |
| cpu_boot_status_reg, |
| status, |
| (status == CPU_BOOT_STATUS_BMC_WAITING_SKIPPED), |
| 10000, |
| cpu_timeout); |
| |
| if (rc) { |
| dev_err(hdev->dev, |
| "Failed to get ACK on skipping BMC, %d\n", |
| status); |
| WREG32(msg_to_cpu_reg, KMD_MSG_NA); |
| rc = -EIO; |
| goto out; |
| } |
| } |
| |
| WREG32(msg_to_cpu_reg, KMD_MSG_FIT_RDY); |
| |
| rc = hl_poll_timeout( |
| hdev, |
| cpu_boot_status_reg, |
| status, |
| (status == CPU_BOOT_STATUS_SRAM_AVAIL), |
| 10000, |
| cpu_timeout); |
| |
| /* Clear message */ |
| WREG32(msg_to_cpu_reg, KMD_MSG_NA); |
| |
| if (rc) { |
| if (status == CPU_BOOT_STATUS_FIT_CORRUPTED) |
| dev_err(hdev->dev, |
| "Device reports FIT image is corrupted\n"); |
| else |
| dev_err(hdev->dev, |
| "Device failed to load, %d\n", status); |
| |
| rc = -EIO; |
| goto out; |
| } |
| |
| dev_info(hdev->dev, "Successfully loaded firmware to device\n"); |
| |
| out: |
| fw_read_errors(hdev, boot_err0_reg); |
| |
| return rc; |
| } |