| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright(c) 2013 - 2019 Intel Corporation. */ |
| |
| #include "fm10k.h" |
| #include <linux/vmalloc.h> |
| #include <net/udp_tunnel.h> |
| #include <linux/if_macvlan.h> |
| |
| /** |
| * fm10k_setup_tx_resources - allocate Tx resources (Descriptors) |
| * @tx_ring: tx descriptor ring (for a specific queue) to setup |
| * |
| * Return 0 on success, negative on failure |
| **/ |
| int fm10k_setup_tx_resources(struct fm10k_ring *tx_ring) |
| { |
| struct device *dev = tx_ring->dev; |
| int size; |
| |
| size = sizeof(struct fm10k_tx_buffer) * tx_ring->count; |
| |
| tx_ring->tx_buffer = vzalloc(size); |
| if (!tx_ring->tx_buffer) |
| goto err; |
| |
| u64_stats_init(&tx_ring->syncp); |
| |
| /* round up to nearest 4K */ |
| tx_ring->size = tx_ring->count * sizeof(struct fm10k_tx_desc); |
| tx_ring->size = ALIGN(tx_ring->size, 4096); |
| |
| tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, |
| &tx_ring->dma, GFP_KERNEL); |
| if (!tx_ring->desc) |
| goto err; |
| |
| return 0; |
| |
| err: |
| vfree(tx_ring->tx_buffer); |
| tx_ring->tx_buffer = NULL; |
| return -ENOMEM; |
| } |
| |
| /** |
| * fm10k_setup_all_tx_resources - allocate all queues Tx resources |
| * @interface: board private structure |
| * |
| * If this function returns with an error, then it's possible one or |
| * more of the rings is populated (while the rest are not). It is the |
| * callers duty to clean those orphaned rings. |
| * |
| * Return 0 on success, negative on failure |
| **/ |
| static int fm10k_setup_all_tx_resources(struct fm10k_intfc *interface) |
| { |
| int i, err; |
| |
| for (i = 0; i < interface->num_tx_queues; i++) { |
| err = fm10k_setup_tx_resources(interface->tx_ring[i]); |
| if (!err) |
| continue; |
| |
| netif_err(interface, probe, interface->netdev, |
| "Allocation for Tx Queue %u failed\n", i); |
| goto err_setup_tx; |
| } |
| |
| return 0; |
| err_setup_tx: |
| /* rewind the index freeing the rings as we go */ |
| while (i--) |
| fm10k_free_tx_resources(interface->tx_ring[i]); |
| return err; |
| } |
| |
| /** |
| * fm10k_setup_rx_resources - allocate Rx resources (Descriptors) |
| * @rx_ring: rx descriptor ring (for a specific queue) to setup |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| int fm10k_setup_rx_resources(struct fm10k_ring *rx_ring) |
| { |
| struct device *dev = rx_ring->dev; |
| int size; |
| |
| size = sizeof(struct fm10k_rx_buffer) * rx_ring->count; |
| |
| rx_ring->rx_buffer = vzalloc(size); |
| if (!rx_ring->rx_buffer) |
| goto err; |
| |
| u64_stats_init(&rx_ring->syncp); |
| |
| /* Round up to nearest 4K */ |
| rx_ring->size = rx_ring->count * sizeof(union fm10k_rx_desc); |
| rx_ring->size = ALIGN(rx_ring->size, 4096); |
| |
| rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, |
| &rx_ring->dma, GFP_KERNEL); |
| if (!rx_ring->desc) |
| goto err; |
| |
| return 0; |
| err: |
| vfree(rx_ring->rx_buffer); |
| rx_ring->rx_buffer = NULL; |
| return -ENOMEM; |
| } |
| |
| /** |
| * fm10k_setup_all_rx_resources - allocate all queues Rx resources |
| * @interface: board private structure |
| * |
| * If this function returns with an error, then it's possible one or |
| * more of the rings is populated (while the rest are not). It is the |
| * callers duty to clean those orphaned rings. |
| * |
| * Return 0 on success, negative on failure |
| **/ |
| static int fm10k_setup_all_rx_resources(struct fm10k_intfc *interface) |
| { |
| int i, err; |
| |
| for (i = 0; i < interface->num_rx_queues; i++) { |
| err = fm10k_setup_rx_resources(interface->rx_ring[i]); |
| if (!err) |
| continue; |
| |
| netif_err(interface, probe, interface->netdev, |
| "Allocation for Rx Queue %u failed\n", i); |
| goto err_setup_rx; |
| } |
| |
| return 0; |
| err_setup_rx: |
| /* rewind the index freeing the rings as we go */ |
| while (i--) |
| fm10k_free_rx_resources(interface->rx_ring[i]); |
| return err; |
| } |
| |
| void fm10k_unmap_and_free_tx_resource(struct fm10k_ring *ring, |
| struct fm10k_tx_buffer *tx_buffer) |
| { |
| if (tx_buffer->skb) { |
| dev_kfree_skb_any(tx_buffer->skb); |
| if (dma_unmap_len(tx_buffer, len)) |
| dma_unmap_single(ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| } else if (dma_unmap_len(tx_buffer, len)) { |
| dma_unmap_page(ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| } |
| tx_buffer->next_to_watch = NULL; |
| tx_buffer->skb = NULL; |
| dma_unmap_len_set(tx_buffer, len, 0); |
| /* tx_buffer must be completely set up in the transmit path */ |
| } |
| |
| /** |
| * fm10k_clean_tx_ring - Free Tx Buffers |
| * @tx_ring: ring to be cleaned |
| **/ |
| static void fm10k_clean_tx_ring(struct fm10k_ring *tx_ring) |
| { |
| unsigned long size; |
| u16 i; |
| |
| /* ring already cleared, nothing to do */ |
| if (!tx_ring->tx_buffer) |
| return; |
| |
| /* Free all the Tx ring sk_buffs */ |
| for (i = 0; i < tx_ring->count; i++) { |
| struct fm10k_tx_buffer *tx_buffer = &tx_ring->tx_buffer[i]; |
| |
| fm10k_unmap_and_free_tx_resource(tx_ring, tx_buffer); |
| } |
| |
| /* reset BQL values */ |
| netdev_tx_reset_queue(txring_txq(tx_ring)); |
| |
| size = sizeof(struct fm10k_tx_buffer) * tx_ring->count; |
| memset(tx_ring->tx_buffer, 0, size); |
| |
| /* Zero out the descriptor ring */ |
| memset(tx_ring->desc, 0, tx_ring->size); |
| } |
| |
| /** |
| * fm10k_free_tx_resources - Free Tx Resources per Queue |
| * @tx_ring: Tx descriptor ring for a specific queue |
| * |
| * Free all transmit software resources |
| **/ |
| void fm10k_free_tx_resources(struct fm10k_ring *tx_ring) |
| { |
| fm10k_clean_tx_ring(tx_ring); |
| |
| vfree(tx_ring->tx_buffer); |
| tx_ring->tx_buffer = NULL; |
| |
| /* if not set, then don't free */ |
| if (!tx_ring->desc) |
| return; |
| |
| dma_free_coherent(tx_ring->dev, tx_ring->size, |
| tx_ring->desc, tx_ring->dma); |
| tx_ring->desc = NULL; |
| } |
| |
| /** |
| * fm10k_clean_all_tx_rings - Free Tx Buffers for all queues |
| * @interface: board private structure |
| **/ |
| void fm10k_clean_all_tx_rings(struct fm10k_intfc *interface) |
| { |
| int i; |
| |
| for (i = 0; i < interface->num_tx_queues; i++) |
| fm10k_clean_tx_ring(interface->tx_ring[i]); |
| } |
| |
| /** |
| * fm10k_free_all_tx_resources - Free Tx Resources for All Queues |
| * @interface: board private structure |
| * |
| * Free all transmit software resources |
| **/ |
| static void fm10k_free_all_tx_resources(struct fm10k_intfc *interface) |
| { |
| int i = interface->num_tx_queues; |
| |
| while (i--) |
| fm10k_free_tx_resources(interface->tx_ring[i]); |
| } |
| |
| /** |
| * fm10k_clean_rx_ring - Free Rx Buffers per Queue |
| * @rx_ring: ring to free buffers from |
| **/ |
| static void fm10k_clean_rx_ring(struct fm10k_ring *rx_ring) |
| { |
| unsigned long size; |
| u16 i; |
| |
| if (!rx_ring->rx_buffer) |
| return; |
| |
| dev_kfree_skb(rx_ring->skb); |
| rx_ring->skb = NULL; |
| |
| /* Free all the Rx ring sk_buffs */ |
| for (i = 0; i < rx_ring->count; i++) { |
| struct fm10k_rx_buffer *buffer = &rx_ring->rx_buffer[i]; |
| /* clean-up will only set page pointer to NULL */ |
| if (!buffer->page) |
| continue; |
| |
| dma_unmap_page(rx_ring->dev, buffer->dma, |
| PAGE_SIZE, DMA_FROM_DEVICE); |
| __free_page(buffer->page); |
| |
| buffer->page = NULL; |
| } |
| |
| size = sizeof(struct fm10k_rx_buffer) * rx_ring->count; |
| memset(rx_ring->rx_buffer, 0, size); |
| |
| /* Zero out the descriptor ring */ |
| memset(rx_ring->desc, 0, rx_ring->size); |
| |
| rx_ring->next_to_alloc = 0; |
| rx_ring->next_to_clean = 0; |
| rx_ring->next_to_use = 0; |
| } |
| |
| /** |
| * fm10k_free_rx_resources - Free Rx Resources |
| * @rx_ring: ring to clean the resources from |
| * |
| * Free all receive software resources |
| **/ |
| void fm10k_free_rx_resources(struct fm10k_ring *rx_ring) |
| { |
| fm10k_clean_rx_ring(rx_ring); |
| |
| vfree(rx_ring->rx_buffer); |
| rx_ring->rx_buffer = NULL; |
| |
| /* if not set, then don't free */ |
| if (!rx_ring->desc) |
| return; |
| |
| dma_free_coherent(rx_ring->dev, rx_ring->size, |
| rx_ring->desc, rx_ring->dma); |
| |
| rx_ring->desc = NULL; |
| } |
| |
| /** |
| * fm10k_clean_all_rx_rings - Free Rx Buffers for all queues |
| * @interface: board private structure |
| **/ |
| void fm10k_clean_all_rx_rings(struct fm10k_intfc *interface) |
| { |
| int i; |
| |
| for (i = 0; i < interface->num_rx_queues; i++) |
| fm10k_clean_rx_ring(interface->rx_ring[i]); |
| } |
| |
| /** |
| * fm10k_free_all_rx_resources - Free Rx Resources for All Queues |
| * @interface: board private structure |
| * |
| * Free all receive software resources |
| **/ |
| static void fm10k_free_all_rx_resources(struct fm10k_intfc *interface) |
| { |
| int i = interface->num_rx_queues; |
| |
| while (i--) |
| fm10k_free_rx_resources(interface->rx_ring[i]); |
| } |
| |
| /** |
| * fm10k_request_glort_range - Request GLORTs for use in configuring rules |
| * @interface: board private structure |
| * |
| * This function allocates a range of glorts for this interface to use. |
| **/ |
| static void fm10k_request_glort_range(struct fm10k_intfc *interface) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| u16 mask = (~hw->mac.dglort_map) >> FM10K_DGLORTMAP_MASK_SHIFT; |
| |
| /* establish GLORT base */ |
| interface->glort = hw->mac.dglort_map & FM10K_DGLORTMAP_NONE; |
| interface->glort_count = 0; |
| |
| /* nothing we can do until mask is allocated */ |
| if (hw->mac.dglort_map == FM10K_DGLORTMAP_NONE) |
| return; |
| |
| /* we support 3 possible GLORT configurations. |
| * 1: VFs consume all but the last 1 |
| * 2: VFs and PF split glorts with possible gap between |
| * 3: VFs allocated first 64, all others belong to PF |
| */ |
| if (mask <= hw->iov.total_vfs) { |
| interface->glort_count = 1; |
| interface->glort += mask; |
| } else if (mask < 64) { |
| interface->glort_count = (mask + 1) / 2; |
| interface->glort += interface->glort_count; |
| } else { |
| interface->glort_count = mask - 63; |
| interface->glort += 64; |
| } |
| } |
| |
| /** |
| * fm10k_free_udp_port_info |
| * @interface: board private structure |
| * |
| * This function frees both geneve_port and vxlan_port structures |
| **/ |
| static void fm10k_free_udp_port_info(struct fm10k_intfc *interface) |
| { |
| struct fm10k_udp_port *port; |
| |
| /* flush all entries from vxlan list */ |
| port = list_first_entry_or_null(&interface->vxlan_port, |
| struct fm10k_udp_port, list); |
| while (port) { |
| list_del(&port->list); |
| kfree(port); |
| port = list_first_entry_or_null(&interface->vxlan_port, |
| struct fm10k_udp_port, |
| list); |
| } |
| |
| /* flush all entries from geneve list */ |
| port = list_first_entry_or_null(&interface->geneve_port, |
| struct fm10k_udp_port, list); |
| while (port) { |
| list_del(&port->list); |
| kfree(port); |
| port = list_first_entry_or_null(&interface->vxlan_port, |
| struct fm10k_udp_port, |
| list); |
| } |
| } |
| |
| /** |
| * fm10k_restore_udp_port_info |
| * @interface: board private structure |
| * |
| * This function restores the value in the tunnel_cfg register(s) after reset |
| **/ |
| static void fm10k_restore_udp_port_info(struct fm10k_intfc *interface) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| struct fm10k_udp_port *port; |
| |
| /* only the PF supports configuring tunnels */ |
| if (hw->mac.type != fm10k_mac_pf) |
| return; |
| |
| port = list_first_entry_or_null(&interface->vxlan_port, |
| struct fm10k_udp_port, list); |
| |
| /* restore tunnel configuration register */ |
| fm10k_write_reg(hw, FM10K_TUNNEL_CFG, |
| (port ? ntohs(port->port) : 0) | |
| (ETH_P_TEB << FM10K_TUNNEL_CFG_NVGRE_SHIFT)); |
| |
| port = list_first_entry_or_null(&interface->geneve_port, |
| struct fm10k_udp_port, list); |
| |
| /* restore Geneve tunnel configuration register */ |
| fm10k_write_reg(hw, FM10K_TUNNEL_CFG_GENEVE, |
| (port ? ntohs(port->port) : 0)); |
| } |
| |
| static struct fm10k_udp_port * |
| fm10k_remove_tunnel_port(struct list_head *ports, |
| struct udp_tunnel_info *ti) |
| { |
| struct fm10k_udp_port *port; |
| |
| list_for_each_entry(port, ports, list) { |
| if ((port->port == ti->port) && |
| (port->sa_family == ti->sa_family)) { |
| list_del(&port->list); |
| return port; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static void fm10k_insert_tunnel_port(struct list_head *ports, |
| struct udp_tunnel_info *ti) |
| { |
| struct fm10k_udp_port *port; |
| |
| /* remove existing port entry from the list so that the newest items |
| * are always at the tail of the list. |
| */ |
| port = fm10k_remove_tunnel_port(ports, ti); |
| if (!port) { |
| port = kmalloc(sizeof(*port), GFP_ATOMIC); |
| if (!port) |
| return; |
| port->port = ti->port; |
| port->sa_family = ti->sa_family; |
| } |
| |
| list_add_tail(&port->list, ports); |
| } |
| |
| /** |
| * fm10k_udp_tunnel_add |
| * @dev: network interface device structure |
| * @ti: Tunnel endpoint information |
| * |
| * This function is called when a new UDP tunnel port has been added. |
| * Due to hardware restrictions, only one port per type can be offloaded at |
| * once. |
| **/ |
| static void fm10k_udp_tunnel_add(struct net_device *dev, |
| struct udp_tunnel_info *ti) |
| { |
| struct fm10k_intfc *interface = netdev_priv(dev); |
| |
| /* only the PF supports configuring tunnels */ |
| if (interface->hw.mac.type != fm10k_mac_pf) |
| return; |
| |
| switch (ti->type) { |
| case UDP_TUNNEL_TYPE_VXLAN: |
| fm10k_insert_tunnel_port(&interface->vxlan_port, ti); |
| break; |
| case UDP_TUNNEL_TYPE_GENEVE: |
| fm10k_insert_tunnel_port(&interface->geneve_port, ti); |
| break; |
| default: |
| return; |
| } |
| |
| fm10k_restore_udp_port_info(interface); |
| } |
| |
| /** |
| * fm10k_udp_tunnel_del |
| * @dev: network interface device structure |
| * @ti: Tunnel end point information |
| * |
| * This function is called when a new UDP tunnel port is deleted. The freed |
| * port will be removed from the list, then we reprogram the offloaded port |
| * based on the head of the list. |
| **/ |
| static void fm10k_udp_tunnel_del(struct net_device *dev, |
| struct udp_tunnel_info *ti) |
| { |
| struct fm10k_intfc *interface = netdev_priv(dev); |
| struct fm10k_udp_port *port = NULL; |
| |
| if (interface->hw.mac.type != fm10k_mac_pf) |
| return; |
| |
| switch (ti->type) { |
| case UDP_TUNNEL_TYPE_VXLAN: |
| port = fm10k_remove_tunnel_port(&interface->vxlan_port, ti); |
| break; |
| case UDP_TUNNEL_TYPE_GENEVE: |
| port = fm10k_remove_tunnel_port(&interface->geneve_port, ti); |
| break; |
| default: |
| return; |
| } |
| |
| /* if we did remove a port we need to free its memory */ |
| kfree(port); |
| |
| fm10k_restore_udp_port_info(interface); |
| } |
| |
| /** |
| * fm10k_open - Called when a network interface is made active |
| * @netdev: network interface device structure |
| * |
| * Returns 0 on success, negative value on failure |
| * |
| * The open entry point is called when a network interface is made |
| * active by the system (IFF_UP). At this point all resources needed |
| * for transmit and receive operations are allocated, the interrupt |
| * handler is registered with the OS, the watchdog timer is started, |
| * and the stack is notified that the interface is ready. |
| **/ |
| int fm10k_open(struct net_device *netdev) |
| { |
| struct fm10k_intfc *interface = netdev_priv(netdev); |
| int err; |
| |
| /* allocate transmit descriptors */ |
| err = fm10k_setup_all_tx_resources(interface); |
| if (err) |
| goto err_setup_tx; |
| |
| /* allocate receive descriptors */ |
| err = fm10k_setup_all_rx_resources(interface); |
| if (err) |
| goto err_setup_rx; |
| |
| /* allocate interrupt resources */ |
| err = fm10k_qv_request_irq(interface); |
| if (err) |
| goto err_req_irq; |
| |
| /* setup GLORT assignment for this port */ |
| fm10k_request_glort_range(interface); |
| |
| /* Notify the stack of the actual queue counts */ |
| err = netif_set_real_num_tx_queues(netdev, |
| interface->num_tx_queues); |
| if (err) |
| goto err_set_queues; |
| |
| err = netif_set_real_num_rx_queues(netdev, |
| interface->num_rx_queues); |
| if (err) |
| goto err_set_queues; |
| |
| udp_tunnel_get_rx_info(netdev); |
| |
| fm10k_up(interface); |
| |
| return 0; |
| |
| err_set_queues: |
| fm10k_qv_free_irq(interface); |
| err_req_irq: |
| fm10k_free_all_rx_resources(interface); |
| err_setup_rx: |
| fm10k_free_all_tx_resources(interface); |
| err_setup_tx: |
| return err; |
| } |
| |
| /** |
| * fm10k_close - Disables a network interface |
| * @netdev: network interface device structure |
| * |
| * Returns 0, this is not allowed to fail |
| * |
| * The close entry point is called when an interface is de-activated |
| * by the OS. The hardware is still under the drivers control, but |
| * needs to be disabled. A global MAC reset is issued to stop the |
| * hardware, and all transmit and receive resources are freed. |
| **/ |
| int fm10k_close(struct net_device *netdev) |
| { |
| struct fm10k_intfc *interface = netdev_priv(netdev); |
| |
| fm10k_down(interface); |
| |
| fm10k_qv_free_irq(interface); |
| |
| fm10k_free_udp_port_info(interface); |
| |
| fm10k_free_all_tx_resources(interface); |
| fm10k_free_all_rx_resources(interface); |
| |
| return 0; |
| } |
| |
| static netdev_tx_t fm10k_xmit_frame(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct fm10k_intfc *interface = netdev_priv(dev); |
| int num_tx_queues = READ_ONCE(interface->num_tx_queues); |
| unsigned int r_idx = skb->queue_mapping; |
| int err; |
| |
| if (!num_tx_queues) |
| return NETDEV_TX_BUSY; |
| |
| if ((skb->protocol == htons(ETH_P_8021Q)) && |
| !skb_vlan_tag_present(skb)) { |
| /* FM10K only supports hardware tagging, any tags in frame |
| * are considered 2nd level or "outer" tags |
| */ |
| struct vlan_hdr *vhdr; |
| __be16 proto; |
| |
| /* make sure skb is not shared */ |
| skb = skb_share_check(skb, GFP_ATOMIC); |
| if (!skb) |
| return NETDEV_TX_OK; |
| |
| /* make sure there is enough room to move the ethernet header */ |
| if (unlikely(!pskb_may_pull(skb, VLAN_ETH_HLEN))) |
| return NETDEV_TX_OK; |
| |
| /* verify the skb head is not shared */ |
| err = skb_cow_head(skb, 0); |
| if (err) { |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| /* locate VLAN header */ |
| vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN); |
| |
| /* pull the 2 key pieces of data out of it */ |
| __vlan_hwaccel_put_tag(skb, |
| htons(ETH_P_8021Q), |
| ntohs(vhdr->h_vlan_TCI)); |
| proto = vhdr->h_vlan_encapsulated_proto; |
| skb->protocol = (ntohs(proto) >= 1536) ? proto : |
| htons(ETH_P_802_2); |
| |
| /* squash it by moving the ethernet addresses up 4 bytes */ |
| memmove(skb->data + VLAN_HLEN, skb->data, 12); |
| __skb_pull(skb, VLAN_HLEN); |
| skb_reset_mac_header(skb); |
| } |
| |
| /* The minimum packet size for a single buffer is 17B so pad the skb |
| * in order to meet this minimum size requirement. |
| */ |
| if (unlikely(skb->len < 17)) { |
| int pad_len = 17 - skb->len; |
| |
| if (skb_pad(skb, pad_len)) |
| return NETDEV_TX_OK; |
| __skb_put(skb, pad_len); |
| } |
| |
| if (r_idx >= num_tx_queues) |
| r_idx %= num_tx_queues; |
| |
| err = fm10k_xmit_frame_ring(skb, interface->tx_ring[r_idx]); |
| |
| return err; |
| } |
| |
| /** |
| * fm10k_tx_timeout - Respond to a Tx Hang |
| * @netdev: network interface device structure |
| * @txqueue: the index of the Tx queue that timed out |
| **/ |
| static void fm10k_tx_timeout(struct net_device *netdev, unsigned int txqueue) |
| { |
| struct fm10k_intfc *interface = netdev_priv(netdev); |
| struct fm10k_ring *tx_ring; |
| bool real_tx_hang = false; |
| |
| if (txqueue >= interface->num_tx_queues) { |
| WARN(1, "invalid Tx queue index %d", txqueue); |
| return; |
| } |
| |
| tx_ring = interface->tx_ring[txqueue]; |
| if (check_for_tx_hang(tx_ring) && fm10k_check_tx_hang(tx_ring)) |
| real_tx_hang = true; |
| |
| #define TX_TIMEO_LIMIT 16000 |
| if (real_tx_hang) { |
| fm10k_tx_timeout_reset(interface); |
| } else { |
| netif_info(interface, drv, netdev, |
| "Fake Tx hang detected with timeout of %d seconds\n", |
| netdev->watchdog_timeo / HZ); |
| |
| /* fake Tx hang - increase the kernel timeout */ |
| if (netdev->watchdog_timeo < TX_TIMEO_LIMIT) |
| netdev->watchdog_timeo *= 2; |
| } |
| } |
| |
| /** |
| * fm10k_host_mbx_ready - Check PF interface's mailbox readiness |
| * @interface: board private structure |
| * |
| * This function checks if the PF interface's mailbox is ready before queueing |
| * mailbox messages for transmission. This will prevent filling the TX mailbox |
| * queue when the receiver is not ready. VF interfaces are exempt from this |
| * check since it will block all PF-VF mailbox messages from being sent from |
| * the VF to the PF at initialization. |
| **/ |
| static bool fm10k_host_mbx_ready(struct fm10k_intfc *interface) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| |
| return (hw->mac.type == fm10k_mac_vf || interface->host_ready); |
| } |
| |
| /** |
| * fm10k_queue_vlan_request - Queue a VLAN update request |
| * @interface: the fm10k interface structure |
| * @vid: the VLAN vid |
| * @vsi: VSI index number |
| * @set: whether to set or clear |
| * |
| * This function queues up a VLAN update. For VFs, this must be sent to the |
| * managing PF over the mailbox. For PFs, we'll use the same handling so that |
| * it's similar to the VF. This avoids storming the PF<->VF mailbox with too |
| * many VLAN updates during reset. |
| */ |
| int fm10k_queue_vlan_request(struct fm10k_intfc *interface, |
| u32 vid, u8 vsi, bool set) |
| { |
| struct fm10k_macvlan_request *request; |
| unsigned long flags; |
| |
| /* This must be atomic since we may be called while the netdev |
| * addr_list_lock is held |
| */ |
| request = kzalloc(sizeof(*request), GFP_ATOMIC); |
| if (!request) |
| return -ENOMEM; |
| |
| request->type = FM10K_VLAN_REQUEST; |
| request->vlan.vid = vid; |
| request->vlan.vsi = vsi; |
| request->set = set; |
| |
| spin_lock_irqsave(&interface->macvlan_lock, flags); |
| list_add_tail(&request->list, &interface->macvlan_requests); |
| spin_unlock_irqrestore(&interface->macvlan_lock, flags); |
| |
| fm10k_macvlan_schedule(interface); |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_queue_mac_request - Queue a MAC update request |
| * @interface: the fm10k interface structure |
| * @glort: the target glort for this update |
| * @addr: the address to update |
| * @vid: the vid to update |
| * @set: whether to add or remove |
| * |
| * This function queues up a MAC request for sending to the switch manager. |
| * A separate thread monitors the queue and sends updates to the switch |
| * manager. Return 0 on success, and negative error code on failure. |
| **/ |
| int fm10k_queue_mac_request(struct fm10k_intfc *interface, u16 glort, |
| const unsigned char *addr, u16 vid, bool set) |
| { |
| struct fm10k_macvlan_request *request; |
| unsigned long flags; |
| |
| /* This must be atomic since we may be called while the netdev |
| * addr_list_lock is held |
| */ |
| request = kzalloc(sizeof(*request), GFP_ATOMIC); |
| if (!request) |
| return -ENOMEM; |
| |
| if (is_multicast_ether_addr(addr)) |
| request->type = FM10K_MC_MAC_REQUEST; |
| else |
| request->type = FM10K_UC_MAC_REQUEST; |
| |
| ether_addr_copy(request->mac.addr, addr); |
| request->mac.glort = glort; |
| request->mac.vid = vid; |
| request->set = set; |
| |
| spin_lock_irqsave(&interface->macvlan_lock, flags); |
| list_add_tail(&request->list, &interface->macvlan_requests); |
| spin_unlock_irqrestore(&interface->macvlan_lock, flags); |
| |
| fm10k_macvlan_schedule(interface); |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_clear_macvlan_queue - Cancel pending updates for a given glort |
| * @interface: the fm10k interface structure |
| * @glort: the target glort to clear |
| * @vlans: true to clear VLAN messages, false to ignore them |
| * |
| * Cancel any outstanding MAC/VLAN requests for a given glort. This is |
| * expected to be called when a logical port goes down. |
| **/ |
| void fm10k_clear_macvlan_queue(struct fm10k_intfc *interface, |
| u16 glort, bool vlans) |
| |
| { |
| struct fm10k_macvlan_request *r, *tmp; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&interface->macvlan_lock, flags); |
| |
| /* Free any outstanding MAC/VLAN requests for this interface */ |
| list_for_each_entry_safe(r, tmp, &interface->macvlan_requests, list) { |
| switch (r->type) { |
| case FM10K_MC_MAC_REQUEST: |
| case FM10K_UC_MAC_REQUEST: |
| /* Don't free requests for other interfaces */ |
| if (r->mac.glort != glort) |
| break; |
| /* fall through */ |
| case FM10K_VLAN_REQUEST: |
| if (vlans) { |
| list_del(&r->list); |
| kfree(r); |
| } |
| break; |
| } |
| } |
| |
| spin_unlock_irqrestore(&interface->macvlan_lock, flags); |
| } |
| |
| static int fm10k_uc_vlan_unsync(struct net_device *netdev, |
| const unsigned char *uc_addr) |
| { |
| struct fm10k_intfc *interface = netdev_priv(netdev); |
| u16 glort = interface->glort; |
| u16 vid = interface->vid; |
| bool set = !!(vid / VLAN_N_VID); |
| int err; |
| |
| /* drop any leading bits on the VLAN ID */ |
| vid &= VLAN_N_VID - 1; |
| |
| err = fm10k_queue_mac_request(interface, glort, uc_addr, vid, set); |
| if (err) |
| return err; |
| |
| /* return non-zero value as we are only doing a partial sync/unsync */ |
| return 1; |
| } |
| |
| static int fm10k_mc_vlan_unsync(struct net_device *netdev, |
| const unsigned char *mc_addr) |
| { |
| struct fm10k_intfc *interface = netdev_priv(netdev); |
| u16 glort = interface->glort; |
| u16 vid = interface->vid; |
| bool set = !!(vid / VLAN_N_VID); |
| int err; |
| |
| /* drop any leading bits on the VLAN ID */ |
| vid &= VLAN_N_VID - 1; |
| |
| err = fm10k_queue_mac_request(interface, glort, mc_addr, vid, set); |
| if (err) |
| return err; |
| |
| /* return non-zero value as we are only doing a partial sync/unsync */ |
| return 1; |
| } |
| |
| static int fm10k_update_vid(struct net_device *netdev, u16 vid, bool set) |
| { |
| struct fm10k_intfc *interface = netdev_priv(netdev); |
| struct fm10k_l2_accel *l2_accel = interface->l2_accel; |
| struct fm10k_hw *hw = &interface->hw; |
| u16 glort; |
| s32 err; |
| int i; |
| |
| /* updates do not apply to VLAN 0 */ |
| if (!vid) |
| return 0; |
| |
| if (vid >= VLAN_N_VID) |
| return -EINVAL; |
| |
| /* Verify that we have permission to add VLANs. If this is a request |
| * to remove a VLAN, we still want to allow the user to remove the |
| * VLAN device. In that case, we need to clear the bit in the |
| * active_vlans bitmask. |
| */ |
| if (set && hw->mac.vlan_override) |
| return -EACCES; |
| |
| /* update active_vlans bitmask */ |
| set_bit(vid, interface->active_vlans); |
| if (!set) |
| clear_bit(vid, interface->active_vlans); |
| |
| /* disable the default VLAN ID on ring if we have an active VLAN */ |
| for (i = 0; i < interface->num_rx_queues; i++) { |
| struct fm10k_ring *rx_ring = interface->rx_ring[i]; |
| u16 rx_vid = rx_ring->vid & (VLAN_N_VID - 1); |
| |
| if (test_bit(rx_vid, interface->active_vlans)) |
| rx_ring->vid |= FM10K_VLAN_CLEAR; |
| else |
| rx_ring->vid &= ~FM10K_VLAN_CLEAR; |
| } |
| |
| /* If our VLAN has been overridden, there is no reason to send VLAN |
| * removal requests as they will be silently ignored. |
| */ |
| if (hw->mac.vlan_override) |
| return 0; |
| |
| /* Do not remove default VLAN ID related entries from VLAN and MAC |
| * tables |
| */ |
| if (!set && vid == hw->mac.default_vid) |
| return 0; |
| |
| /* Do not throw an error if the interface is down. We will sync once |
| * we come up |
| */ |
| if (test_bit(__FM10K_DOWN, interface->state)) |
| return 0; |
| |
| fm10k_mbx_lock(interface); |
| |
| /* only need to update the VLAN if not in promiscuous mode */ |
| if (!(netdev->flags & IFF_PROMISC)) { |
| err = fm10k_queue_vlan_request(interface, vid, 0, set); |
| if (err) |
| goto err_out; |
| } |
| |
| /* Update our base MAC address */ |
| err = fm10k_queue_mac_request(interface, interface->glort, |
| hw->mac.addr, vid, set); |
| if (err) |
| goto err_out; |
| |
| /* Update L2 accelerated macvlan addresses */ |
| if (l2_accel) { |
| for (i = 0; i < l2_accel->size; i++) { |
| struct net_device *sdev = l2_accel->macvlan[i]; |
| |
| if (!sdev) |
| continue; |
| |
| glort = l2_accel->dglort + 1 + i; |
| |
| fm10k_queue_mac_request(interface, glort, |
| sdev->dev_addr, |
| vid, set); |
| } |
| } |
| |
| /* set VLAN ID prior to syncing/unsyncing the VLAN */ |
| interface->vid = vid + (set ? VLAN_N_VID : 0); |
| |
| /* Update the unicast and multicast address list to add/drop VLAN */ |
| __dev_uc_unsync(netdev, fm10k_uc_vlan_unsync); |
| __dev_mc_unsync(netdev, fm10k_mc_vlan_unsync); |
| |
| err_out: |
| fm10k_mbx_unlock(interface); |
| |
| return err; |
| } |
| |
| static int fm10k_vlan_rx_add_vid(struct net_device *netdev, |
| __always_unused __be16 proto, u16 vid) |
| { |
| /* update VLAN and address table based on changes */ |
| return fm10k_update_vid(netdev, vid, true); |
| } |
| |
| static int fm10k_vlan_rx_kill_vid(struct net_device *netdev, |
| __always_unused __be16 proto, u16 vid) |
| { |
| /* update VLAN and address table based on changes */ |
| return fm10k_update_vid(netdev, vid, false); |
| } |
| |
| static u16 fm10k_find_next_vlan(struct fm10k_intfc *interface, u16 vid) |
| { |
| struct fm10k_hw *hw = &interface->hw; |
| u16 default_vid = hw->mac.default_vid; |
| u16 vid_limit = vid < default_vid ? default_vid : VLAN_N_VID; |
| |
| vid = find_next_bit(interface->active_vlans, vid_limit, ++vid); |
| |
| return vid; |
| } |
| |
| static void fm10k_clear_unused_vlans(struct fm10k_intfc *interface) |
| { |
| u32 vid, prev_vid; |
| |
| /* loop through and find any gaps in the table */ |
| for (vid = 0, prev_vid = 0; |
| prev_vid < VLAN_N_VID; |
| prev_vid = vid + 1, vid = fm10k_find_next_vlan(interface, vid)) { |
| if (prev_vid == vid) |
| continue; |
| |
| /* send request to clear multiple bits at a time */ |
| prev_vid += (vid - prev_vid - 1) << FM10K_VLAN_LENGTH_SHIFT; |
| fm10k_queue_vlan_request(interface, prev_vid, 0, false); |
| } |
| } |
| |
| static int __fm10k_uc_sync(struct net_device *dev, |
| const unsigned char *addr, bool sync) |
| { |
| struct fm10k_intfc *interface = netdev_priv(dev); |
| u16 vid, glort = interface->glort; |
| s32 err; |
| |
| if (!is_valid_ether_addr(addr)) |
| return -EADDRNOTAVAIL; |
| |
| for (vid = fm10k_find_next_vlan(interface, 0); |
| vid < VLAN_N_VID; |
| vid = fm10k_find_next_vlan(interface, vid)) { |
| err = fm10k_queue_mac_request(interface, glort, |
| addr, vid, sync); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int fm10k_uc_sync(struct net_device *dev, |
| const unsigned char *addr) |
| { |
| return __fm10k_uc_sync(dev, addr, true); |
| } |
| |
| static int fm10k_uc_unsync(struct net_device *dev, |
| const unsigned char *addr) |
| { |
| return __fm10k_uc_sync(dev, addr, false); |
| } |
| |
| static int fm10k_set_mac(struct net_device *dev, void *p) |
| { |
| struct fm10k_intfc *interface = netdev_priv(dev); |
| struct fm10k_hw *hw = &interface->hw; |
| struct sockaddr *addr = p; |
| s32 err = 0; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| if (dev->flags & IFF_UP) { |
| /* setting MAC address requires mailbox */ |
| fm10k_mbx_lock(interface); |
| |
| err = fm10k_uc_sync(dev, addr->sa_data); |
| if (!err) |
| fm10k_uc_unsync(dev, hw->mac.addr); |
| |
| fm10k_mbx_unlock(interface); |
| } |
| |
| if (!err) { |
| ether_addr_copy(dev->dev_addr, addr->sa_data); |
| ether_addr_copy(hw->mac.addr, addr->sa_data); |
| dev->addr_assign_type &= ~NET_ADDR_RANDOM; |
| } |
| |
| /* if we had a mailbox error suggest trying again */ |
| return err ? -EAGAIN : 0; |
| } |
| |
| static int __fm10k_mc_sync(struct net_device *dev, |
| const unsigned char *addr, bool sync) |
| { |
| struct fm10k_intfc *interface = netdev_priv(dev); |
| u16 vid, glort = interface->glort; |
| s32 err; |
| |
| if (!is_multicast_ether_addr(addr)) |
| return -EADDRNOTAVAIL; |
| |
| for (vid = fm10k_find_next_vlan(interface, 0); |
| vid < VLAN_N_VID; |
| vid = fm10k_find_next_vlan(interface, vid)) { |
| err = fm10k_queue_mac_request(interface, glort, |
| addr, vid, sync); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int fm10k_mc_sync(struct net_device *dev, |
| const unsigned char *addr) |
| { |
| return __fm10k_mc_sync(dev, addr, true); |
| } |
| |
| static int fm10k_mc_unsync(struct net_device *dev, |
| const unsigned char *addr) |
| { |
| return __fm10k_mc_sync(dev, addr, false); |
| } |
| |
| static void fm10k_set_rx_mode(struct net_device *dev) |
| { |
| struct fm10k_intfc *interface = netdev_priv(dev); |
| struct fm10k_hw *hw = &interface->hw; |
| int xcast_mode; |
| |
| /* no need to update the harwdare if we are not running */ |
| if (!(dev->flags & IFF_UP)) |
| return; |
| |
| /* determine new mode based on flags */ |
| xcast_mode = (dev->flags & IFF_PROMISC) ? FM10K_XCAST_MODE_PROMISC : |
| (dev->flags & IFF_ALLMULTI) ? FM10K_XCAST_MODE_ALLMULTI : |
| (dev->flags & (IFF_BROADCAST | IFF_MULTICAST)) ? |
| FM10K_XCAST_MODE_MULTI : FM10K_XCAST_MODE_NONE; |
| |
| fm10k_mbx_lock(interface); |
| |
| /* update xcast mode first, but only if it changed */ |
| if (interface->xcast_mode != xcast_mode) { |
| /* update VLAN table when entering promiscuous mode */ |
| if (xcast_mode == FM10K_XCAST_MODE_PROMISC) |
| fm10k_queue_vlan_request(interface, FM10K_VLAN_ALL, |
| 0, true); |
| |
| /* clear VLAN table when exiting promiscuous mode */ |
| if (interface->xcast_mode == FM10K_XCAST_MODE_PROMISC) |
| fm10k_clear_unused_vlans(interface); |
| |
| /* update xcast mode if host's mailbox is ready */ |
| if (fm10k_host_mbx_ready(interface)) |
| hw->mac.ops.update_xcast_mode(hw, interface->glort, |
| xcast_mode); |
| |
| /* record updated xcast mode state */ |
| interface->xcast_mode = xcast_mode; |
| } |
| |
| /* synchronize all of the addresses */ |
| __dev_uc_sync(dev, fm10k_uc_sync, fm10k_uc_unsync); |
| __dev_mc_sync(dev, fm10k_mc_sync, fm10k_mc_unsync); |
| |
| fm10k_mbx_unlock(interface); |
| } |
| |
| void fm10k_restore_rx_state(struct fm10k_intfc *interface) |
| { |
| struct fm10k_l2_accel *l2_accel = interface->l2_accel; |
| struct net_device *netdev = interface->netdev; |
| struct fm10k_hw *hw = &interface->hw; |
| int xcast_mode, i; |
| u16 vid, glort; |
| |
| /* record glort for this interface */ |
| glort = interface->glort; |
| |
| /* convert interface flags to xcast mode */ |
| if (netdev->flags & IFF_PROMISC) |
| xcast_mode = FM10K_XCAST_MODE_PROMISC; |
| else if (netdev->flags & IFF_ALLMULTI) |
| xcast_mode = FM10K_XCAST_MODE_ALLMULTI; |
| else if (netdev->flags & (IFF_BROADCAST | IFF_MULTICAST)) |
| xcast_mode = FM10K_XCAST_MODE_MULTI; |
| else |
| xcast_mode = FM10K_XCAST_MODE_NONE; |
| |
| fm10k_mbx_lock(interface); |
| |
| /* Enable logical port if host's mailbox is ready */ |
| if (fm10k_host_mbx_ready(interface)) |
| hw->mac.ops.update_lport_state(hw, glort, |
| interface->glort_count, true); |
| |
| /* update VLAN table */ |
| fm10k_queue_vlan_request(interface, FM10K_VLAN_ALL, 0, |
| xcast_mode == FM10K_XCAST_MODE_PROMISC); |
| |
| /* update table with current entries */ |
| for (vid = fm10k_find_next_vlan(interface, 0); |
| vid < VLAN_N_VID; |
| vid = fm10k_find_next_vlan(interface, vid)) { |
| fm10k_queue_vlan_request(interface, vid, 0, true); |
| |
| fm10k_queue_mac_request(interface, glort, |
| hw->mac.addr, vid, true); |
| |
| /* synchronize macvlan addresses */ |
| if (l2_accel) { |
| for (i = 0; i < l2_accel->size; i++) { |
| struct net_device *sdev = l2_accel->macvlan[i]; |
| |
| if (!sdev) |
| continue; |
| |
| glort = l2_accel->dglort + 1 + i; |
| |
| fm10k_queue_mac_request(interface, glort, |
| sdev->dev_addr, |
| vid, true); |
| } |
| } |
| } |
| |
| /* update xcast mode before synchronizing addresses if host's mailbox |
| * is ready |
| */ |
| if (fm10k_host_mbx_ready(interface)) |
| hw->mac.ops.update_xcast_mode(hw, glort, xcast_mode); |
| |
| /* synchronize all of the addresses */ |
| __dev_uc_sync(netdev, fm10k_uc_sync, fm10k_uc_unsync); |
| __dev_mc_sync(netdev, fm10k_mc_sync, fm10k_mc_unsync); |
| |
| /* synchronize macvlan addresses */ |
| if (l2_accel) { |
| for (i = 0; i < l2_accel->size; i++) { |
| struct net_device *sdev = l2_accel->macvlan[i]; |
| |
| if (!sdev) |
| continue; |
| |
| glort = l2_accel->dglort + 1 + i; |
| |
| hw->mac.ops.update_xcast_mode(hw, glort, |
| FM10K_XCAST_MODE_NONE); |
| fm10k_queue_mac_request(interface, glort, |
| sdev->dev_addr, |
| hw->mac.default_vid, true); |
| } |
| } |
| |
| fm10k_mbx_unlock(interface); |
| |
| /* record updated xcast mode state */ |
| interface->xcast_mode = xcast_mode; |
| |
| /* Restore tunnel configuration */ |
| fm10k_restore_udp_port_info(interface); |
| } |
| |
| void fm10k_reset_rx_state(struct fm10k_intfc *interface) |
| { |
| struct net_device *netdev = interface->netdev; |
| struct fm10k_hw *hw = &interface->hw; |
| |
| /* Wait for MAC/VLAN work to finish */ |
| while (test_bit(__FM10K_MACVLAN_SCHED, interface->state)) |
| usleep_range(1000, 2000); |
| |
| /* Cancel pending MAC/VLAN requests */ |
| fm10k_clear_macvlan_queue(interface, interface->glort, true); |
| |
| fm10k_mbx_lock(interface); |
| |
| /* clear the logical port state on lower device if host's mailbox is |
| * ready |
| */ |
| if (fm10k_host_mbx_ready(interface)) |
| hw->mac.ops.update_lport_state(hw, interface->glort, |
| interface->glort_count, false); |
| |
| fm10k_mbx_unlock(interface); |
| |
| /* reset flags to default state */ |
| interface->xcast_mode = FM10K_XCAST_MODE_NONE; |
| |
| /* clear the sync flag since the lport has been dropped */ |
| __dev_uc_unsync(netdev, NULL); |
| __dev_mc_unsync(netdev, NULL); |
| } |
| |
| /** |
| * fm10k_get_stats64 - Get System Network Statistics |
| * @netdev: network interface device structure |
| * @stats: storage space for 64bit statistics |
| * |
| * Obtain 64bit statistics in a way that is safe for both 32bit and 64bit |
| * architectures. |
| */ |
| static void fm10k_get_stats64(struct net_device *netdev, |
| struct rtnl_link_stats64 *stats) |
| { |
| struct fm10k_intfc *interface = netdev_priv(netdev); |
| struct fm10k_ring *ring; |
| unsigned int start, i; |
| u64 bytes, packets; |
| |
| rcu_read_lock(); |
| |
| for (i = 0; i < interface->num_rx_queues; i++) { |
| ring = READ_ONCE(interface->rx_ring[i]); |
| |
| if (!ring) |
| continue; |
| |
| do { |
| start = u64_stats_fetch_begin_irq(&ring->syncp); |
| packets = ring->stats.packets; |
| bytes = ring->stats.bytes; |
| } while (u64_stats_fetch_retry_irq(&ring->syncp, start)); |
| |
| stats->rx_packets += packets; |
| stats->rx_bytes += bytes; |
| } |
| |
| for (i = 0; i < interface->num_tx_queues; i++) { |
| ring = READ_ONCE(interface->tx_ring[i]); |
| |
| if (!ring) |
| continue; |
| |
| do { |
| start = u64_stats_fetch_begin_irq(&ring->syncp); |
| packets = ring->stats.packets; |
| bytes = ring->stats.bytes; |
| } while (u64_stats_fetch_retry_irq(&ring->syncp, start)); |
| |
| stats->tx_packets += packets; |
| stats->tx_bytes += bytes; |
| } |
| |
| rcu_read_unlock(); |
| |
| /* following stats updated by fm10k_service_task() */ |
| stats->rx_missed_errors = netdev->stats.rx_missed_errors; |
| } |
| |
| int fm10k_setup_tc(struct net_device *dev, u8 tc) |
| { |
| struct fm10k_intfc *interface = netdev_priv(dev); |
| int err; |
| |
| /* Currently only the PF supports priority classes */ |
| if (tc && (interface->hw.mac.type != fm10k_mac_pf)) |
| return -EINVAL; |
| |
| /* Hardware supports up to 8 traffic classes */ |
| if (tc > 8) |
| return -EINVAL; |
| |
| /* Hardware has to reinitialize queues to match packet |
| * buffer alignment. Unfortunately, the hardware is not |
| * flexible enough to do this dynamically. |
| */ |
| if (netif_running(dev)) |
| fm10k_close(dev); |
| |
| fm10k_mbx_free_irq(interface); |
| |
| fm10k_clear_queueing_scheme(interface); |
| |
| /* we expect the prio_tc map to be repopulated later */ |
| netdev_reset_tc(dev); |
| netdev_set_num_tc(dev, tc); |
| |
| err = fm10k_init_queueing_scheme(interface); |
| if (err) |
| goto err_queueing_scheme; |
| |
| err = fm10k_mbx_request_irq(interface); |
| if (err) |
| goto err_mbx_irq; |
| |
| err = netif_running(dev) ? fm10k_open(dev) : 0; |
| if (err) |
| goto err_open; |
| |
| /* flag to indicate SWPRI has yet to be updated */ |
| set_bit(FM10K_FLAG_SWPRI_CONFIG, interface->flags); |
| |
| return 0; |
| err_open: |
| fm10k_mbx_free_irq(interface); |
| err_mbx_irq: |
| fm10k_clear_queueing_scheme(interface); |
| err_queueing_scheme: |
| netif_device_detach(dev); |
| |
| return err; |
| } |
| |
| static int __fm10k_setup_tc(struct net_device *dev, enum tc_setup_type type, |
| void *type_data) |
| { |
| struct tc_mqprio_qopt *mqprio = type_data; |
| |
| if (type != TC_SETUP_QDISC_MQPRIO) |
| return -EOPNOTSUPP; |
| |
| mqprio->hw = TC_MQPRIO_HW_OFFLOAD_TCS; |
| |
| return fm10k_setup_tc(dev, mqprio->num_tc); |
| } |
| |
| static void fm10k_assign_l2_accel(struct fm10k_intfc *interface, |
| struct fm10k_l2_accel *l2_accel) |
| { |
| int i; |
| |
| for (i = 0; i < interface->num_rx_queues; i++) { |
| struct fm10k_ring *ring = interface->rx_ring[i]; |
| |
| rcu_assign_pointer(ring->l2_accel, l2_accel); |
| } |
| |
| interface->l2_accel = l2_accel; |
| } |
| |
| static void *fm10k_dfwd_add_station(struct net_device *dev, |
| struct net_device *sdev) |
| { |
| struct fm10k_intfc *interface = netdev_priv(dev); |
| struct fm10k_l2_accel *l2_accel = interface->l2_accel; |
| struct fm10k_l2_accel *old_l2_accel = NULL; |
| struct fm10k_dglort_cfg dglort = { 0 }; |
| struct fm10k_hw *hw = &interface->hw; |
| int size, i; |
| u16 vid, glort; |
| |
| /* The hardware supported by fm10k only filters on the destination MAC |
| * address. In order to avoid issues we only support offloading modes |
| * where the hardware can actually provide the functionality. |
| */ |
| if (!macvlan_supports_dest_filter(sdev)) |
| return ERR_PTR(-EMEDIUMTYPE); |
| |
| /* allocate l2 accel structure if it is not available */ |
| if (!l2_accel) { |
| /* verify there is enough free GLORTs to support l2_accel */ |
| if (interface->glort_count < 7) |
| return ERR_PTR(-EBUSY); |
| |
| size = offsetof(struct fm10k_l2_accel, macvlan[7]); |
| l2_accel = kzalloc(size, GFP_KERNEL); |
| if (!l2_accel) |
| return ERR_PTR(-ENOMEM); |
| |
| l2_accel->size = 7; |
| l2_accel->dglort = interface->glort; |
| |
| /* update pointers */ |
| fm10k_assign_l2_accel(interface, l2_accel); |
| /* do not expand if we are at our limit */ |
| } else if ((l2_accel->count == FM10K_MAX_STATIONS) || |
| (l2_accel->count == (interface->glort_count - 1))) { |
| return ERR_PTR(-EBUSY); |
| /* expand if we have hit the size limit */ |
| } else if (l2_accel->count == l2_accel->size) { |
| old_l2_accel = l2_accel; |
| size = offsetof(struct fm10k_l2_accel, |
| macvlan[(l2_accel->size * 2) + 1]); |
| l2_accel = kzalloc(size, GFP_KERNEL); |
| if (!l2_accel) |
| return ERR_PTR(-ENOMEM); |
| |
| memcpy(l2_accel, old_l2_accel, |
| offsetof(struct fm10k_l2_accel, |
| macvlan[old_l2_accel->size])); |
| |
| l2_accel->size = (old_l2_accel->size * 2) + 1; |
| |
| /* update pointers */ |
| fm10k_assign_l2_accel(interface, l2_accel); |
| kfree_rcu(old_l2_accel, rcu); |
| } |
| |
| /* add macvlan to accel table, and record GLORT for position */ |
| for (i = 0; i < l2_accel->size; i++) { |
| if (!l2_accel->macvlan[i]) |
| break; |
| } |
| |
| /* record station */ |
| l2_accel->macvlan[i] = sdev; |
| l2_accel->count++; |
| |
| /* configure default DGLORT mapping for RSS/DCB */ |
| dglort.idx = fm10k_dglort_pf_rss; |
| dglort.inner_rss = 1; |
| dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask); |
| dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask); |
| dglort.glort = interface->glort; |
| dglort.shared_l = fls(l2_accel->size); |
| hw->mac.ops.configure_dglort_map(hw, &dglort); |
| |
| /* Add rules for this specific dglort to the switch */ |
| fm10k_mbx_lock(interface); |
| |
| glort = l2_accel->dglort + 1 + i; |
| |
| if (fm10k_host_mbx_ready(interface)) |
| hw->mac.ops.update_xcast_mode(hw, glort, |
| FM10K_XCAST_MODE_NONE); |
| |
| fm10k_queue_mac_request(interface, glort, sdev->dev_addr, |
| hw->mac.default_vid, true); |
| |
| for (vid = fm10k_find_next_vlan(interface, 0); |
| vid < VLAN_N_VID; |
| vid = fm10k_find_next_vlan(interface, vid)) |
| fm10k_queue_mac_request(interface, glort, sdev->dev_addr, |
| vid, true); |
| |
| fm10k_mbx_unlock(interface); |
| |
| return sdev; |
| } |
| |
| static void fm10k_dfwd_del_station(struct net_device *dev, void *priv) |
| { |
| struct fm10k_intfc *interface = netdev_priv(dev); |
| struct fm10k_l2_accel *l2_accel = READ_ONCE(interface->l2_accel); |
| struct fm10k_dglort_cfg dglort = { 0 }; |
| struct fm10k_hw *hw = &interface->hw; |
| struct net_device *sdev = priv; |
| u16 vid, glort; |
| int i; |
| |
| if (!l2_accel) |
| return; |
| |
| /* search table for matching interface */ |
| for (i = 0; i < l2_accel->size; i++) { |
| if (l2_accel->macvlan[i] == sdev) |
| break; |
| } |
| |
| /* exit if macvlan not found */ |
| if (i == l2_accel->size) |
| return; |
| |
| /* Remove any rules specific to this dglort */ |
| fm10k_mbx_lock(interface); |
| |
| glort = l2_accel->dglort + 1 + i; |
| |
| if (fm10k_host_mbx_ready(interface)) |
| hw->mac.ops.update_xcast_mode(hw, glort, |
| FM10K_XCAST_MODE_NONE); |
| |
| fm10k_queue_mac_request(interface, glort, sdev->dev_addr, |
| hw->mac.default_vid, false); |
| |
| for (vid = fm10k_find_next_vlan(interface, 0); |
| vid < VLAN_N_VID; |
| vid = fm10k_find_next_vlan(interface, vid)) |
| fm10k_queue_mac_request(interface, glort, sdev->dev_addr, |
| vid, false); |
| |
| fm10k_mbx_unlock(interface); |
| |
| /* record removal */ |
| l2_accel->macvlan[i] = NULL; |
| l2_accel->count--; |
| |
| /* configure default DGLORT mapping for RSS/DCB */ |
| dglort.idx = fm10k_dglort_pf_rss; |
| dglort.inner_rss = 1; |
| dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask); |
| dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask); |
| dglort.glort = interface->glort; |
| dglort.shared_l = fls(l2_accel->size); |
| hw->mac.ops.configure_dglort_map(hw, &dglort); |
| |
| /* If table is empty remove it */ |
| if (l2_accel->count == 0) { |
| fm10k_assign_l2_accel(interface, NULL); |
| kfree_rcu(l2_accel, rcu); |
| } |
| } |
| |
| static netdev_features_t fm10k_features_check(struct sk_buff *skb, |
| struct net_device *dev, |
| netdev_features_t features) |
| { |
| if (!skb->encapsulation || fm10k_tx_encap_offload(skb)) |
| return features; |
| |
| return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); |
| } |
| |
| static const struct net_device_ops fm10k_netdev_ops = { |
| .ndo_open = fm10k_open, |
| .ndo_stop = fm10k_close, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_start_xmit = fm10k_xmit_frame, |
| .ndo_set_mac_address = fm10k_set_mac, |
| .ndo_tx_timeout = fm10k_tx_timeout, |
| .ndo_vlan_rx_add_vid = fm10k_vlan_rx_add_vid, |
| .ndo_vlan_rx_kill_vid = fm10k_vlan_rx_kill_vid, |
| .ndo_set_rx_mode = fm10k_set_rx_mode, |
| .ndo_get_stats64 = fm10k_get_stats64, |
| .ndo_setup_tc = __fm10k_setup_tc, |
| .ndo_set_vf_mac = fm10k_ndo_set_vf_mac, |
| .ndo_set_vf_vlan = fm10k_ndo_set_vf_vlan, |
| .ndo_set_vf_rate = fm10k_ndo_set_vf_bw, |
| .ndo_get_vf_config = fm10k_ndo_get_vf_config, |
| .ndo_get_vf_stats = fm10k_ndo_get_vf_stats, |
| .ndo_udp_tunnel_add = fm10k_udp_tunnel_add, |
| .ndo_udp_tunnel_del = fm10k_udp_tunnel_del, |
| .ndo_dfwd_add_station = fm10k_dfwd_add_station, |
| .ndo_dfwd_del_station = fm10k_dfwd_del_station, |
| .ndo_features_check = fm10k_features_check, |
| }; |
| |
| #define DEFAULT_DEBUG_LEVEL_SHIFT 3 |
| |
| struct net_device *fm10k_alloc_netdev(const struct fm10k_info *info) |
| { |
| netdev_features_t hw_features; |
| struct fm10k_intfc *interface; |
| struct net_device *dev; |
| |
| dev = alloc_etherdev_mq(sizeof(struct fm10k_intfc), MAX_QUEUES); |
| if (!dev) |
| return NULL; |
| |
| /* set net device and ethtool ops */ |
| dev->netdev_ops = &fm10k_netdev_ops; |
| fm10k_set_ethtool_ops(dev); |
| |
| /* configure default debug level */ |
| interface = netdev_priv(dev); |
| interface->msg_enable = BIT(DEFAULT_DEBUG_LEVEL_SHIFT) - 1; |
| |
| /* configure default features */ |
| dev->features |= NETIF_F_IP_CSUM | |
| NETIF_F_IPV6_CSUM | |
| NETIF_F_SG | |
| NETIF_F_TSO | |
| NETIF_F_TSO6 | |
| NETIF_F_TSO_ECN | |
| NETIF_F_RXHASH | |
| NETIF_F_RXCSUM; |
| |
| /* Only the PF can support VXLAN and NVGRE tunnel offloads */ |
| if (info->mac == fm10k_mac_pf) { |
| dev->hw_enc_features = NETIF_F_IP_CSUM | |
| NETIF_F_TSO | |
| NETIF_F_TSO6 | |
| NETIF_F_TSO_ECN | |
| NETIF_F_GSO_UDP_TUNNEL | |
| NETIF_F_IPV6_CSUM | |
| NETIF_F_SG; |
| |
| dev->features |= NETIF_F_GSO_UDP_TUNNEL; |
| } |
| |
| /* all features defined to this point should be changeable */ |
| hw_features = dev->features; |
| |
| /* allow user to enable L2 forwarding acceleration */ |
| hw_features |= NETIF_F_HW_L2FW_DOFFLOAD; |
| |
| /* configure VLAN features */ |
| dev->vlan_features |= dev->features; |
| |
| /* we want to leave these both on as we cannot disable VLAN tag |
| * insertion or stripping on the hardware since it is contained |
| * in the FTAG and not in the frame itself. |
| */ |
| dev->features |= NETIF_F_HW_VLAN_CTAG_TX | |
| NETIF_F_HW_VLAN_CTAG_RX | |
| NETIF_F_HW_VLAN_CTAG_FILTER; |
| |
| dev->priv_flags |= IFF_UNICAST_FLT; |
| |
| dev->hw_features |= hw_features; |
| |
| /* MTU range: 68 - 15342 */ |
| dev->min_mtu = ETH_MIN_MTU; |
| dev->max_mtu = FM10K_MAX_JUMBO_FRAME_SIZE; |
| |
| return dev; |
| } |