| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * usbusx2y.c - ALSA USB US-428 Driver |
| * |
| 2005-04-14 Karsten Wiese |
| Version 0.8.7.2: |
| Call snd_card_free() instead of snd_card_free_in_thread() to prevent oops with dead keyboard symptom. |
| Tested ok with kernel 2.6.12-rc2. |
| |
| 2004-12-14 Karsten Wiese |
| Version 0.8.7.1: |
| snd_pcm_open for rawusb pcm-devices now returns -EBUSY if called without rawusb's hwdep device being open. |
| |
| 2004-12-02 Karsten Wiese |
| Version 0.8.7: |
| Use macro usb_maxpacket() for portability. |
| |
| 2004-10-26 Karsten Wiese |
| Version 0.8.6: |
| wake_up() process waiting in usx2y_urbs_start() on error. |
| |
| 2004-10-21 Karsten Wiese |
| Version 0.8.5: |
| nrpacks is runtime or compiletime configurable now with tested values from 1 to 4. |
| |
| 2004-10-03 Karsten Wiese |
| Version 0.8.2: |
| Avoid any possible racing while in prepare callback. |
| |
| 2004-09-30 Karsten Wiese |
| Version 0.8.0: |
| Simplified things and made ohci work again. |
| |
| 2004-09-20 Karsten Wiese |
| Version 0.7.3: |
| Use usb_kill_urb() instead of deprecated (kernel 2.6.9) usb_unlink_urb(). |
| |
| 2004-07-13 Karsten Wiese |
| Version 0.7.1: |
| Don't sleep in START/STOP callbacks anymore. |
| us428 channels C/D not handled just for this version, sorry. |
| |
| 2004-06-21 Karsten Wiese |
| Version 0.6.4: |
| Temporarely suspend midi input |
| to sanely call usb_set_interface() when setting format. |
| |
| 2004-06-12 Karsten Wiese |
| Version 0.6.3: |
| Made it thus the following rule is enforced: |
| "All pcm substreams of one usx2y have to operate at the same rate & format." |
| |
| 2004-04-06 Karsten Wiese |
| Version 0.6.0: |
| Runs on 2.6.5 kernel without any "--with-debug=" things. |
| us224 reported running. |
| |
| 2004-01-14 Karsten Wiese |
| Version 0.5.1: |
| Runs with 2.6.1 kernel. |
| |
| 2003-12-30 Karsten Wiese |
| Version 0.4.1: |
| Fix 24Bit 4Channel capturing for the us428. |
| |
| 2003-11-27 Karsten Wiese, Martin Langer |
| Version 0.4: |
| us122 support. |
| us224 could be tested by uncommenting the sections containing USB_ID_US224 |
| |
| 2003-11-03 Karsten Wiese |
| Version 0.3: |
| 24Bit support. |
| "arecord -D hw:1 -c 2 -r 48000 -M -f S24_3LE|aplay -D hw:1 -c 2 -r 48000 -M -f S24_3LE" works. |
| |
| 2003-08-22 Karsten Wiese |
| Version 0.0.8: |
| Removed EZUSB Firmware. First Stage Firmwaredownload is now done by tascam-firmware downloader. |
| See: |
| http://usb-midi-fw.sourceforge.net/tascam-firmware.tar.gz |
| |
| 2003-06-18 Karsten Wiese |
| Version 0.0.5: |
| changed to compile with kernel 2.4.21 and alsa 0.9.4 |
| |
| 2002-10-16 Karsten Wiese |
| Version 0.0.4: |
| compiles again with alsa-current. |
| USB_ISO_ASAP not used anymore (most of the time), instead |
| urb->start_frame is calculated here now, some calls inside usb-driver don't need to happen anymore. |
| |
| To get the best out of this: |
| Disable APM-support in the kernel as APM-BIOS calls (once each second) hard disable interrupt for many precious milliseconds. |
| This helped me much on my slowish PII 400 & PIII 500. |
| ACPI yet untested but might cause the same bad behaviour. |
| Use a kernel with lowlatency and preemptiv patches applied. |
| To autoload snd-usb-midi append a line |
| post-install snd-usb-us428 modprobe snd-usb-midi |
| to /etc/modules.conf. |
| |
| known problems: |
| sliders, knobs, lights not yet handled except MASTER Volume slider. |
| "pcm -c 2" doesn't work. "pcm -c 2 -m direct_interleaved" does. |
| KDE3: "Enable full duplex operation" deadlocks. |
| |
| 2002-08-31 Karsten Wiese |
| Version 0.0.3: audio also simplex; |
| simplifying: iso urbs only 1 packet, melted structs. |
| ASYNC_UNLINK not used anymore: no more crashes so far..... |
| for alsa 0.9 rc3. |
| |
| 2002-08-09 Karsten Wiese |
| Version 0.0.2: midi works with snd-usb-midi, audio (only fullduplex now) with i.e. bristol. |
| The firmware has been sniffed from win2k us-428 driver 3.09. |
| |
| * Copyright (c) 2002 - 2004 Karsten Wiese |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/usb.h> |
| #include <sound/core.h> |
| #include <sound/initval.h> |
| #include <sound/pcm.h> |
| |
| #include <sound/rawmidi.h> |
| #include "usx2y.h" |
| #include "usbusx2y.h" |
| #include "usX2Yhwdep.h" |
| |
| MODULE_AUTHOR("Karsten Wiese <annabellesgarden@yahoo.de>"); |
| MODULE_DESCRIPTION("TASCAM "NAME_ALLCAPS" Version 0.8.7.2"); |
| MODULE_LICENSE("GPL"); |
| |
| static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */ |
| static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */ |
| static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */ |
| |
| module_param_array(index, int, NULL, 0444); |
| MODULE_PARM_DESC(index, "Index value for "NAME_ALLCAPS"."); |
| module_param_array(id, charp, NULL, 0444); |
| MODULE_PARM_DESC(id, "ID string for "NAME_ALLCAPS"."); |
| module_param_array(enable, bool, NULL, 0444); |
| MODULE_PARM_DESC(enable, "Enable "NAME_ALLCAPS"."); |
| |
| static int snd_usx2y_card_used[SNDRV_CARDS]; |
| |
| static void snd_usx2y_card_private_free(struct snd_card *card); |
| static void usx2y_unlinkseq(struct snd_usx2y_async_seq *s); |
| |
| /* |
| * pipe 4 is used for switching the lamps, setting samplerate, volumes .... |
| */ |
| static void i_usx2y_out04_int(struct urb *urb) |
| { |
| #ifdef CONFIG_SND_DEBUG |
| if (urb->status) { |
| int i; |
| struct usx2ydev *usx2y = urb->context; |
| |
| for (i = 0; i < 10 && usx2y->as04.urb[i] != urb; i++) |
| ; |
| dev_dbg(&urb->dev->dev, "%s urb %i status=%i\n", __func__, i, urb->status); |
| } |
| #endif |
| } |
| |
| static void i_usx2y_in04_int(struct urb *urb) |
| { |
| int err = 0; |
| struct usx2ydev *usx2y = urb->context; |
| struct us428ctls_sharedmem *us428ctls = usx2y->us428ctls_sharedmem; |
| struct us428_p4out *p4out; |
| int i, j, n, diff, send; |
| |
| usx2y->in04_int_calls++; |
| |
| if (urb->status) { |
| dev_dbg(&urb->dev->dev, "Interrupt Pipe 4 came back with status=%i\n", urb->status); |
| return; |
| } |
| |
| if (us428ctls) { |
| diff = -1; |
| if (us428ctls->ctl_snapshot_last == -2) { |
| diff = 0; |
| memcpy(usx2y->in04_last, usx2y->in04_buf, sizeof(usx2y->in04_last)); |
| us428ctls->ctl_snapshot_last = -1; |
| } else { |
| for (i = 0; i < 21; i++) { |
| if (usx2y->in04_last[i] != ((char *)usx2y->in04_buf)[i]) { |
| if (diff < 0) |
| diff = i; |
| usx2y->in04_last[i] = ((char *)usx2y->in04_buf)[i]; |
| } |
| } |
| } |
| if (diff >= 0) { |
| n = us428ctls->ctl_snapshot_last + 1; |
| if (n >= N_US428_CTL_BUFS || n < 0) |
| n = 0; |
| memcpy(us428ctls->ctl_snapshot + n, usx2y->in04_buf, sizeof(us428ctls->ctl_snapshot[0])); |
| us428ctls->ctl_snapshot_differs_at[n] = diff; |
| us428ctls->ctl_snapshot_last = n; |
| wake_up(&usx2y->us428ctls_wait_queue_head); |
| } |
| } |
| |
| if (usx2y->us04) { |
| if (!usx2y->us04->submitted) { |
| do { |
| err = usb_submit_urb(usx2y->us04->urb[usx2y->us04->submitted++], GFP_ATOMIC); |
| } while (!err && usx2y->us04->submitted < usx2y->us04->len); |
| } |
| } else { |
| if (us428ctls && us428ctls->p4out_last >= 0 && us428ctls->p4out_last < N_US428_P4OUT_BUFS) { |
| if (us428ctls->p4out_last != us428ctls->p4out_sent) { |
| send = us428ctls->p4out_sent + 1; |
| if (send >= N_US428_P4OUT_BUFS) |
| send = 0; |
| for (j = 0; j < URBS_ASYNC_SEQ && !err; ++j) { |
| if (!usx2y->as04.urb[j]->status) { |
| p4out = us428ctls->p4out + send; // FIXME if more than 1 p4out is new, 1 gets lost. |
| usb_fill_bulk_urb(usx2y->as04.urb[j], usx2y->dev, |
| usb_sndbulkpipe(usx2y->dev, 0x04), &p4out->val.vol, |
| p4out->type == ELT_LIGHT ? sizeof(struct us428_lights) : 5, |
| i_usx2y_out04_int, usx2y); |
| err = usb_submit_urb(usx2y->as04.urb[j], GFP_ATOMIC); |
| us428ctls->p4out_sent = send; |
| break; |
| } |
| } |
| } |
| } |
| } |
| |
| if (err) |
| dev_err(&urb->dev->dev, "in04_int() usb_submit_urb err=%i\n", err); |
| |
| urb->dev = usx2y->dev; |
| usb_submit_urb(urb, GFP_ATOMIC); |
| } |
| |
| /* |
| * Prepare some urbs |
| */ |
| int usx2y_async_seq04_init(struct usx2ydev *usx2y) |
| { |
| int err = 0, i; |
| |
| if (WARN_ON(usx2y->as04.buffer)) |
| return -EBUSY; |
| |
| usx2y->as04.buffer = kmalloc_array(URBS_ASYNC_SEQ, |
| URB_DATA_LEN_ASYNC_SEQ, GFP_KERNEL); |
| if (!usx2y->as04.buffer) { |
| err = -ENOMEM; |
| } else { |
| for (i = 0; i < URBS_ASYNC_SEQ; ++i) { |
| usx2y->as04.urb[i] = usb_alloc_urb(0, GFP_KERNEL); |
| if (!usx2y->as04.urb[i]) { |
| err = -ENOMEM; |
| break; |
| } |
| usb_fill_bulk_urb(usx2y->as04.urb[i], usx2y->dev, |
| usb_sndbulkpipe(usx2y->dev, 0x04), |
| usx2y->as04.buffer + URB_DATA_LEN_ASYNC_SEQ * i, 0, |
| i_usx2y_out04_int, usx2y); |
| err = usb_urb_ep_type_check(usx2y->as04.urb[i]); |
| if (err < 0) |
| break; |
| } |
| } |
| if (err) |
| usx2y_unlinkseq(&usx2y->as04); |
| return err; |
| } |
| |
| int usx2y_in04_init(struct usx2ydev *usx2y) |
| { |
| int err; |
| |
| if (WARN_ON(usx2y->in04_urb)) |
| return -EBUSY; |
| |
| usx2y->in04_urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!usx2y->in04_urb) { |
| err = -ENOMEM; |
| goto error; |
| } |
| |
| usx2y->in04_buf = kmalloc(21, GFP_KERNEL); |
| if (!usx2y->in04_buf) { |
| err = -ENOMEM; |
| goto error; |
| } |
| |
| init_waitqueue_head(&usx2y->in04_wait_queue); |
| usb_fill_int_urb(usx2y->in04_urb, usx2y->dev, usb_rcvintpipe(usx2y->dev, 0x4), |
| usx2y->in04_buf, 21, |
| i_usx2y_in04_int, usx2y, |
| 10); |
| if (usb_urb_ep_type_check(usx2y->in04_urb)) { |
| err = -EINVAL; |
| goto error; |
| } |
| return usb_submit_urb(usx2y->in04_urb, GFP_KERNEL); |
| |
| error: |
| kfree(usx2y->in04_buf); |
| usb_free_urb(usx2y->in04_urb); |
| usx2y->in04_buf = NULL; |
| usx2y->in04_urb = NULL; |
| return err; |
| } |
| |
| static void usx2y_unlinkseq(struct snd_usx2y_async_seq *s) |
| { |
| int i; |
| |
| for (i = 0; i < URBS_ASYNC_SEQ; ++i) { |
| if (!s->urb[i]) |
| continue; |
| usb_kill_urb(s->urb[i]); |
| usb_free_urb(s->urb[i]); |
| s->urb[i] = NULL; |
| } |
| kfree(s->buffer); |
| s->buffer = NULL; |
| } |
| |
| static const struct usb_device_id snd_usx2y_usb_id_table[] = { |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x1604, |
| .idProduct = USB_ID_US428 |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x1604, |
| .idProduct = USB_ID_US122 |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x1604, |
| .idProduct = USB_ID_US224 |
| }, |
| { /* terminator */ } |
| }; |
| MODULE_DEVICE_TABLE(usb, snd_usx2y_usb_id_table); |
| |
| static int usx2y_create_card(struct usb_device *device, |
| struct usb_interface *intf, |
| struct snd_card **cardp) |
| { |
| int dev; |
| struct snd_card *card; |
| int err; |
| |
| for (dev = 0; dev < SNDRV_CARDS; ++dev) |
| if (enable[dev] && !snd_usx2y_card_used[dev]) |
| break; |
| if (dev >= SNDRV_CARDS) |
| return -ENODEV; |
| err = snd_card_new(&intf->dev, index[dev], id[dev], THIS_MODULE, |
| sizeof(struct usx2ydev), &card); |
| if (err < 0) |
| return err; |
| snd_usx2y_card_used[usx2y(card)->card_index = dev] = 1; |
| card->private_free = snd_usx2y_card_private_free; |
| usx2y(card)->dev = device; |
| init_waitqueue_head(&usx2y(card)->prepare_wait_queue); |
| init_waitqueue_head(&usx2y(card)->us428ctls_wait_queue_head); |
| mutex_init(&usx2y(card)->pcm_mutex); |
| INIT_LIST_HEAD(&usx2y(card)->midi_list); |
| strcpy(card->driver, "USB "NAME_ALLCAPS""); |
| sprintf(card->shortname, "TASCAM "NAME_ALLCAPS""); |
| sprintf(card->longname, "%s (%x:%x if %d at %03d/%03d)", |
| card->shortname, |
| le16_to_cpu(device->descriptor.idVendor), |
| le16_to_cpu(device->descriptor.idProduct), |
| 0,//us428(card)->usbmidi.ifnum, |
| usx2y(card)->dev->bus->busnum, usx2y(card)->dev->devnum); |
| *cardp = card; |
| return 0; |
| } |
| |
| static void snd_usx2y_card_private_free(struct snd_card *card) |
| { |
| struct usx2ydev *usx2y = usx2y(card); |
| |
| kfree(usx2y->in04_buf); |
| usb_free_urb(usx2y->in04_urb); |
| if (usx2y->us428ctls_sharedmem) |
| free_pages_exact(usx2y->us428ctls_sharedmem, |
| US428_SHAREDMEM_PAGES); |
| if (usx2y->card_index >= 0 && usx2y->card_index < SNDRV_CARDS) |
| snd_usx2y_card_used[usx2y->card_index] = 0; |
| } |
| |
| static void snd_usx2y_disconnect(struct usb_interface *intf) |
| { |
| struct snd_card *card; |
| struct usx2ydev *usx2y; |
| struct list_head *p; |
| |
| card = usb_get_intfdata(intf); |
| if (!card) |
| return; |
| usx2y = usx2y(card); |
| usx2y->chip_status = USX2Y_STAT_CHIP_HUP; |
| usx2y_unlinkseq(&usx2y->as04); |
| usb_kill_urb(usx2y->in04_urb); |
| snd_card_disconnect(card); |
| |
| /* release the midi resources */ |
| list_for_each(p, &usx2y->midi_list) { |
| snd_usbmidi_disconnect(p); |
| } |
| if (usx2y->us428ctls_sharedmem) |
| wake_up(&usx2y->us428ctls_wait_queue_head); |
| snd_card_free(card); |
| } |
| |
| static int snd_usx2y_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *device = interface_to_usbdev(intf); |
| struct snd_card *card; |
| int err; |
| |
| if (le16_to_cpu(device->descriptor.idVendor) != 0x1604 || |
| (le16_to_cpu(device->descriptor.idProduct) != USB_ID_US122 && |
| le16_to_cpu(device->descriptor.idProduct) != USB_ID_US224 && |
| le16_to_cpu(device->descriptor.idProduct) != USB_ID_US428)) |
| return -EINVAL; |
| |
| err = usx2y_create_card(device, intf, &card); |
| if (err < 0) |
| return err; |
| err = usx2y_hwdep_new(card, device); |
| if (err < 0) |
| goto error; |
| err = snd_card_register(card); |
| if (err < 0) |
| goto error; |
| |
| dev_set_drvdata(&intf->dev, card); |
| return 0; |
| |
| error: |
| snd_card_free(card); |
| return err; |
| } |
| |
| static struct usb_driver snd_usx2y_usb_driver = { |
| .name = "snd-usb-usx2y", |
| .probe = snd_usx2y_probe, |
| .disconnect = snd_usx2y_disconnect, |
| .id_table = snd_usx2y_usb_id_table, |
| }; |
| module_usb_driver(snd_usx2y_usb_driver); |