| TI DA8xx MUSB |
| ~~~~~~~~~~~~~ |
| For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms. |
| |
| Required properties: |
| ~~~~~~~~~~~~~~~~~~~~ |
| - compatible : Should be set to "ti,da830-musb". |
| |
| - reg: Offset and length of the USB controller register set. |
| |
| - interrupts: The USB interrupt number. |
| |
| - interrupt-names: Should be set to "mc". |
| |
| - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg". |
| |
| - phys: Phandle for the PHY device |
| |
| - phy-names: Should be "usb-phy" |
| |
| Optional properties: |
| ~~~~~~~~~~~~~~~~~~~~ |
| - vbus-supply: Phandle to a regulator providing the USB bus power. |
| |
| Example: |
| usb_phy: usb-phy { |
| compatible = "ti,da830-usb-phy"; |
| #phy-cells = <0>; |
| status = "okay"; |
| }; |
| usb0: usb@200000 { |
| compatible = "ti,da830-musb"; |
| reg = <0x00200000 0x10000>; |
| interrupts = <58>; |
| interrupt-names = "mc"; |
| |
| dr_mode = "host"; |
| vbus-supply = <&usb_vbus>; |
| phys = <&usb_phy 0>; |
| phy-names = "usb-phy"; |
| |
| status = "okay"; |
| }; |
