| /* |
| * ld9040 AMOLED LCD panel driver. |
| * |
| * Copyright (c) 2011 Samsung Electronics |
| * Author: Donghwa Lee <dh09.lee@samsung.com> |
| * Derived from drivers/video/backlight/s6e63m0.c |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/wait.h> |
| #include <linux/fb.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/spi/spi.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/lcd.h> |
| #include <linux/backlight.h> |
| #include <linux/module.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include "ld9040_gamma.h" |
| |
| #define SLEEPMSEC 0x1000 |
| #define ENDDEF 0x2000 |
| #define DEFMASK 0xFF00 |
| #define COMMAND_ONLY 0xFE |
| #define DATA_ONLY 0xFF |
| |
| #define MIN_BRIGHTNESS 0 |
| #define MAX_BRIGHTNESS 24 |
| #define power_is_on(pwr) ((pwr) <= FB_BLANK_NORMAL) |
| |
| struct ld9040 { |
| struct device *dev; |
| struct spi_device *spi; |
| unsigned int power; |
| unsigned int current_brightness; |
| |
| struct lcd_device *ld; |
| struct backlight_device *bd; |
| struct lcd_platform_data *lcd_pd; |
| |
| struct mutex lock; |
| bool enabled; |
| }; |
| |
| static struct regulator_bulk_data supplies[] = { |
| { .supply = "vdd3", }, |
| { .supply = "vci", }, |
| }; |
| |
| static void ld9040_regulator_enable(struct ld9040 *lcd) |
| { |
| int ret = 0; |
| struct lcd_platform_data *pd = NULL; |
| |
| pd = lcd->lcd_pd; |
| mutex_lock(&lcd->lock); |
| if (!lcd->enabled) { |
| ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies); |
| if (ret) |
| goto out; |
| |
| lcd->enabled = true; |
| } |
| mdelay(pd->power_on_delay); |
| out: |
| mutex_unlock(&lcd->lock); |
| } |
| |
| static void ld9040_regulator_disable(struct ld9040 *lcd) |
| { |
| int ret = 0; |
| |
| mutex_lock(&lcd->lock); |
| if (lcd->enabled) { |
| ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies); |
| if (ret) |
| goto out; |
| |
| lcd->enabled = false; |
| } |
| out: |
| mutex_unlock(&lcd->lock); |
| } |
| |
| static const unsigned short seq_swreset[] = { |
| 0x01, COMMAND_ONLY, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_user_setting[] = { |
| 0xF0, 0x5A, |
| |
| DATA_ONLY, 0x5A, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_elvss_on[] = { |
| 0xB1, 0x0D, |
| |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x16, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_gtcon[] = { |
| 0xF7, 0x09, |
| |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_panel_condition[] = { |
| 0xF8, 0x05, |
| |
| DATA_ONLY, 0x65, |
| DATA_ONLY, 0x96, |
| DATA_ONLY, 0x71, |
| DATA_ONLY, 0x7D, |
| DATA_ONLY, 0x19, |
| DATA_ONLY, 0x3B, |
| DATA_ONLY, 0x0D, |
| DATA_ONLY, 0x19, |
| DATA_ONLY, 0x7E, |
| DATA_ONLY, 0x0D, |
| DATA_ONLY, 0xE2, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x7E, |
| DATA_ONLY, 0x7D, |
| DATA_ONLY, 0x07, |
| DATA_ONLY, 0x07, |
| DATA_ONLY, 0x20, |
| DATA_ONLY, 0x20, |
| DATA_ONLY, 0x20, |
| DATA_ONLY, 0x02, |
| DATA_ONLY, 0x02, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_gamma_set1[] = { |
| 0xF9, 0x00, |
| |
| DATA_ONLY, 0xA7, |
| DATA_ONLY, 0xB4, |
| DATA_ONLY, 0xAE, |
| DATA_ONLY, 0xBF, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x91, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0xB2, |
| DATA_ONLY, 0xB4, |
| DATA_ONLY, 0xAA, |
| DATA_ONLY, 0xBB, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0xAC, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0xB3, |
| DATA_ONLY, 0xB1, |
| DATA_ONLY, 0xAA, |
| DATA_ONLY, 0xBC, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0xB3, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_gamma_ctrl[] = { |
| 0xFB, 0x02, |
| |
| DATA_ONLY, 0x5A, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_gamma_start[] = { |
| 0xF9, COMMAND_ONLY, |
| |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_apon[] = { |
| 0xF3, 0x00, |
| |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x0A, |
| DATA_ONLY, 0x02, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_display_ctrl[] = { |
| 0xF2, 0x02, |
| |
| DATA_ONLY, 0x08, |
| DATA_ONLY, 0x08, |
| DATA_ONLY, 0x10, |
| DATA_ONLY, 0x10, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_manual_pwr[] = { |
| 0xB0, 0x04, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_pwr_ctrl[] = { |
| 0xF4, 0x0A, |
| |
| DATA_ONLY, 0x87, |
| DATA_ONLY, 0x25, |
| DATA_ONLY, 0x6A, |
| DATA_ONLY, 0x44, |
| DATA_ONLY, 0x02, |
| DATA_ONLY, 0x88, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_sleep_out[] = { |
| 0x11, COMMAND_ONLY, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_sleep_in[] = { |
| 0x10, COMMAND_ONLY, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_display_on[] = { |
| 0x29, COMMAND_ONLY, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_display_off[] = { |
| 0x28, COMMAND_ONLY, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_vci1_1st_en[] = { |
| 0xF3, 0x10, |
| |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x02, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_vl1_en[] = { |
| 0xF3, 0x11, |
| |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x02, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_vl2_en[] = { |
| 0xF3, 0x13, |
| |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x02, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_vci1_2nd_en[] = { |
| 0xF3, 0x33, |
| |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x02, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_vl3_en[] = { |
| 0xF3, 0x37, |
| |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x02, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_vreg1_amp_en[] = { |
| 0xF3, 0x37, |
| |
| DATA_ONLY, 0x01, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x02, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_vgh_amp_en[] = { |
| 0xF3, 0x37, |
| |
| DATA_ONLY, 0x11, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x02, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_vgl_amp_en[] = { |
| 0xF3, 0x37, |
| |
| DATA_ONLY, 0x31, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x02, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_vmos_amp_en[] = { |
| 0xF3, 0x37, |
| |
| DATA_ONLY, 0xB1, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x03, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_vint_amp_en[] = { |
| 0xF3, 0x37, |
| |
| DATA_ONLY, 0xF1, |
| /* DATA_ONLY, 0x71, VMOS/VBL/VBH not used */ |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x03, |
| /* DATA_ONLY, 0x02, VMOS/VBL/VBH not used */ |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_vbh_amp_en[] = { |
| 0xF3, 0x37, |
| |
| DATA_ONLY, 0xF9, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x03, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_vbl_amp_en[] = { |
| 0xF3, 0x37, |
| |
| DATA_ONLY, 0xFD, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x03, |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_gam_amp_en[] = { |
| 0xF3, 0x37, |
| |
| DATA_ONLY, 0xFF, |
| /* DATA_ONLY, 0x73, VMOS/VBL/VBH not used */ |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x03, |
| /* DATA_ONLY, 0x02, VMOS/VBL/VBH not used */ |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_sd_amp_en[] = { |
| 0xF3, 0x37, |
| |
| DATA_ONLY, 0xFF, |
| /* DATA_ONLY, 0x73, VMOS/VBL/VBH not used */ |
| DATA_ONLY, 0x80, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x03, |
| /* DATA_ONLY, 0x02, VMOS/VBL/VBH not used */ |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_gls_en[] = { |
| 0xF3, 0x37, |
| |
| DATA_ONLY, 0xFF, |
| /* DATA_ONLY, 0x73, VMOS/VBL/VBH not used */ |
| DATA_ONLY, 0x81, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x03, |
| /* DATA_ONLY, 0x02, VMOS/VBL/VBH not used */ |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_els_en[] = { |
| 0xF3, 0x37, |
| |
| DATA_ONLY, 0xFF, |
| /* DATA_ONLY, 0x73, VMOS/VBL/VBH not used */ |
| DATA_ONLY, 0x83, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x03, |
| /* DATA_ONLY, 0x02, VMOS/VBL/VBH not used */ |
| ENDDEF, 0x00 |
| }; |
| |
| static const unsigned short seq_el_on[] = { |
| 0xF3, 0x37, |
| |
| DATA_ONLY, 0xFF, |
| /* DATA_ONLY, 0x73, VMOS/VBL/VBH not used */ |
| DATA_ONLY, 0x87, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x03, |
| /* DATA_ONLY, 0x02, VMOS/VBL/VBH not used */ |
| ENDDEF, 0x00 |
| }; |
| |
| static int ld9040_spi_write_byte(struct ld9040 *lcd, int addr, int data) |
| { |
| u16 buf[1]; |
| struct spi_message msg; |
| |
| struct spi_transfer xfer = { |
| .len = 2, |
| .tx_buf = buf, |
| }; |
| |
| buf[0] = (addr << 8) | data; |
| |
| spi_message_init(&msg); |
| spi_message_add_tail(&xfer, &msg); |
| |
| return spi_sync(lcd->spi, &msg); |
| } |
| |
| static int ld9040_spi_write(struct ld9040 *lcd, unsigned char address, |
| unsigned char command) |
| { |
| int ret = 0; |
| |
| if (address != DATA_ONLY) |
| ret = ld9040_spi_write_byte(lcd, 0x0, address); |
| if (command != COMMAND_ONLY) |
| ret = ld9040_spi_write_byte(lcd, 0x1, command); |
| |
| return ret; |
| } |
| |
| static int ld9040_panel_send_sequence(struct ld9040 *lcd, |
| const unsigned short *wbuf) |
| { |
| int ret = 0, i = 0; |
| |
| while ((wbuf[i] & DEFMASK) != ENDDEF) { |
| if ((wbuf[i] & DEFMASK) != SLEEPMSEC) { |
| ret = ld9040_spi_write(lcd, wbuf[i], wbuf[i+1]); |
| if (ret) |
| break; |
| } else |
| udelay(wbuf[i+1]*1000); |
| i += 2; |
| } |
| |
| return ret; |
| } |
| |
| static int _ld9040_gamma_ctl(struct ld9040 *lcd, const unsigned int *gamma) |
| { |
| unsigned int i = 0; |
| int ret = 0; |
| |
| /* start gamma table updating. */ |
| ret = ld9040_panel_send_sequence(lcd, seq_gamma_start); |
| if (ret) { |
| dev_err(lcd->dev, "failed to disable gamma table updating.\n"); |
| goto gamma_err; |
| } |
| |
| for (i = 0 ; i < GAMMA_TABLE_COUNT; i++) { |
| ret = ld9040_spi_write(lcd, DATA_ONLY, gamma[i]); |
| if (ret) { |
| dev_err(lcd->dev, "failed to set gamma table.\n"); |
| goto gamma_err; |
| } |
| } |
| |
| /* update gamma table. */ |
| ret = ld9040_panel_send_sequence(lcd, seq_gamma_ctrl); |
| if (ret) |
| dev_err(lcd->dev, "failed to update gamma table.\n"); |
| |
| gamma_err: |
| return ret; |
| } |
| |
| static int ld9040_gamma_ctl(struct ld9040 *lcd, int gamma) |
| { |
| int ret = 0; |
| |
| ret = _ld9040_gamma_ctl(lcd, gamma_table.gamma_22_table[gamma]); |
| |
| return ret; |
| } |
| |
| |
| static int ld9040_ldi_init(struct ld9040 *lcd) |
| { |
| int ret, i; |
| static const unsigned short *init_seq[] = { |
| seq_user_setting, |
| seq_panel_condition, |
| seq_display_ctrl, |
| seq_manual_pwr, |
| seq_elvss_on, |
| seq_gtcon, |
| seq_gamma_set1, |
| seq_gamma_ctrl, |
| seq_sleep_out, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(init_seq); i++) { |
| ret = ld9040_panel_send_sequence(lcd, init_seq[i]); |
| /* workaround: minimum delay time for transferring CMD */ |
| udelay(300); |
| if (ret) |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int ld9040_ldi_enable(struct ld9040 *lcd) |
| { |
| int ret = 0; |
| |
| ret = ld9040_panel_send_sequence(lcd, seq_display_on); |
| |
| return ret; |
| } |
| |
| static int ld9040_ldi_disable(struct ld9040 *lcd) |
| { |
| int ret; |
| |
| ret = ld9040_panel_send_sequence(lcd, seq_display_off); |
| ret = ld9040_panel_send_sequence(lcd, seq_sleep_in); |
| |
| return ret; |
| } |
| |
| static int ld9040_power_on(struct ld9040 *lcd) |
| { |
| int ret = 0; |
| struct lcd_platform_data *pd = NULL; |
| pd = lcd->lcd_pd; |
| if (!pd) { |
| dev_err(lcd->dev, "platform data is NULL.\n"); |
| return -EFAULT; |
| } |
| |
| /* lcd power on */ |
| ld9040_regulator_enable(lcd); |
| |
| if (!pd->reset) { |
| dev_err(lcd->dev, "reset is NULL.\n"); |
| return -EFAULT; |
| } else { |
| pd->reset(lcd->ld); |
| mdelay(pd->reset_delay); |
| } |
| |
| ret = ld9040_ldi_init(lcd); |
| if (ret) { |
| dev_err(lcd->dev, "failed to initialize ldi.\n"); |
| return ret; |
| } |
| |
| ret = ld9040_ldi_enable(lcd); |
| if (ret) { |
| dev_err(lcd->dev, "failed to enable ldi.\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ld9040_power_off(struct ld9040 *lcd) |
| { |
| int ret = 0; |
| struct lcd_platform_data *pd = NULL; |
| |
| pd = lcd->lcd_pd; |
| if (!pd) { |
| dev_err(lcd->dev, "platform data is NULL.\n"); |
| return -EFAULT; |
| } |
| |
| ret = ld9040_ldi_disable(lcd); |
| if (ret) { |
| dev_err(lcd->dev, "lcd setting failed.\n"); |
| return -EIO; |
| } |
| |
| mdelay(pd->power_off_delay); |
| |
| /* lcd power off */ |
| ld9040_regulator_disable(lcd); |
| |
| return 0; |
| } |
| |
| static int ld9040_power(struct ld9040 *lcd, int power) |
| { |
| int ret = 0; |
| |
| if (power_is_on(power) && !power_is_on(lcd->power)) |
| ret = ld9040_power_on(lcd); |
| else if (!power_is_on(power) && power_is_on(lcd->power)) |
| ret = ld9040_power_off(lcd); |
| |
| if (!ret) |
| lcd->power = power; |
| |
| return ret; |
| } |
| |
| static int ld9040_set_power(struct lcd_device *ld, int power) |
| { |
| struct ld9040 *lcd = lcd_get_data(ld); |
| |
| if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN && |
| power != FB_BLANK_NORMAL) { |
| dev_err(lcd->dev, "power value should be 0, 1 or 4.\n"); |
| return -EINVAL; |
| } |
| |
| return ld9040_power(lcd, power); |
| } |
| |
| static int ld9040_get_power(struct lcd_device *ld) |
| { |
| struct ld9040 *lcd = lcd_get_data(ld); |
| |
| return lcd->power; |
| } |
| |
| static int ld9040_get_brightness(struct backlight_device *bd) |
| { |
| return bd->props.brightness; |
| } |
| |
| static int ld9040_set_brightness(struct backlight_device *bd) |
| { |
| int ret = 0, brightness = bd->props.brightness; |
| struct ld9040 *lcd = bl_get_data(bd); |
| |
| if (brightness < MIN_BRIGHTNESS || |
| brightness > bd->props.max_brightness) { |
| dev_err(&bd->dev, "lcd brightness should be %d to %d.\n", |
| MIN_BRIGHTNESS, MAX_BRIGHTNESS); |
| return -EINVAL; |
| } |
| |
| ret = ld9040_gamma_ctl(lcd, bd->props.brightness); |
| if (ret) { |
| dev_err(&bd->dev, "lcd brightness setting failed.\n"); |
| return -EIO; |
| } |
| |
| return ret; |
| } |
| |
| static struct lcd_ops ld9040_lcd_ops = { |
| .set_power = ld9040_set_power, |
| .get_power = ld9040_get_power, |
| }; |
| |
| static const struct backlight_ops ld9040_backlight_ops = { |
| .get_brightness = ld9040_get_brightness, |
| .update_status = ld9040_set_brightness, |
| }; |
| |
| |
| static int ld9040_probe(struct spi_device *spi) |
| { |
| int ret = 0; |
| struct ld9040 *lcd = NULL; |
| struct lcd_device *ld = NULL; |
| struct backlight_device *bd = NULL; |
| struct backlight_properties props; |
| |
| lcd = devm_kzalloc(&spi->dev, sizeof(struct ld9040), GFP_KERNEL); |
| if (!lcd) |
| return -ENOMEM; |
| |
| /* ld9040 lcd panel uses 3-wire 9bits SPI Mode. */ |
| spi->bits_per_word = 9; |
| |
| ret = spi_setup(spi); |
| if (ret < 0) { |
| dev_err(&spi->dev, "spi setup failed.\n"); |
| return ret; |
| } |
| |
| lcd->spi = spi; |
| lcd->dev = &spi->dev; |
| |
| lcd->lcd_pd = spi->dev.platform_data; |
| if (!lcd->lcd_pd) { |
| dev_err(&spi->dev, "platform data is NULL.\n"); |
| return -EFAULT; |
| } |
| |
| mutex_init(&lcd->lock); |
| |
| ret = regulator_bulk_get(lcd->dev, ARRAY_SIZE(supplies), supplies); |
| if (ret) { |
| dev_err(lcd->dev, "Failed to get regulators: %d\n", ret); |
| return ret; |
| } |
| |
| ld = lcd_device_register("ld9040", &spi->dev, lcd, &ld9040_lcd_ops); |
| if (IS_ERR(ld)) { |
| ret = PTR_ERR(ld); |
| goto out_free_regulator; |
| } |
| |
| lcd->ld = ld; |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.type = BACKLIGHT_RAW; |
| props.max_brightness = MAX_BRIGHTNESS; |
| |
| bd = backlight_device_register("ld9040-bl", &spi->dev, |
| lcd, &ld9040_backlight_ops, &props); |
| if (IS_ERR(bd)) { |
| ret = PTR_ERR(bd); |
| goto out_unregister_lcd; |
| } |
| |
| bd->props.brightness = MAX_BRIGHTNESS; |
| lcd->bd = bd; |
| |
| /* |
| * if lcd panel was on from bootloader like u-boot then |
| * do not lcd on. |
| */ |
| if (!lcd->lcd_pd->lcd_enabled) { |
| /* |
| * if lcd panel was off from bootloader then |
| * current lcd status is powerdown and then |
| * it enables lcd panel. |
| */ |
| lcd->power = FB_BLANK_POWERDOWN; |
| |
| ld9040_power(lcd, FB_BLANK_UNBLANK); |
| } else |
| lcd->power = FB_BLANK_UNBLANK; |
| |
| dev_set_drvdata(&spi->dev, lcd); |
| |
| dev_info(&spi->dev, "ld9040 panel driver has been probed.\n"); |
| return 0; |
| |
| out_unregister_lcd: |
| lcd_device_unregister(lcd->ld); |
| out_free_regulator: |
| regulator_bulk_free(ARRAY_SIZE(supplies), supplies); |
| |
| return ret; |
| } |
| |
| static int ld9040_remove(struct spi_device *spi) |
| { |
| struct ld9040 *lcd = dev_get_drvdata(&spi->dev); |
| |
| ld9040_power(lcd, FB_BLANK_POWERDOWN); |
| backlight_device_unregister(lcd->bd); |
| lcd_device_unregister(lcd->ld); |
| regulator_bulk_free(ARRAY_SIZE(supplies), supplies); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_PM) |
| static int ld9040_suspend(struct spi_device *spi, pm_message_t mesg) |
| { |
| int ret = 0; |
| struct ld9040 *lcd = dev_get_drvdata(&spi->dev); |
| |
| dev_dbg(&spi->dev, "lcd->power = %d\n", lcd->power); |
| |
| /* |
| * when lcd panel is suspend, lcd panel becomes off |
| * regardless of status. |
| */ |
| ret = ld9040_power(lcd, FB_BLANK_POWERDOWN); |
| |
| return ret; |
| } |
| |
| static int ld9040_resume(struct spi_device *spi) |
| { |
| int ret = 0; |
| struct ld9040 *lcd = dev_get_drvdata(&spi->dev); |
| |
| lcd->power = FB_BLANK_POWERDOWN; |
| |
| ret = ld9040_power(lcd, FB_BLANK_UNBLANK); |
| |
| return ret; |
| } |
| #else |
| #define ld9040_suspend NULL |
| #define ld9040_resume NULL |
| #endif |
| |
| /* Power down all displays on reboot, poweroff or halt. */ |
| static void ld9040_shutdown(struct spi_device *spi) |
| { |
| struct ld9040 *lcd = dev_get_drvdata(&spi->dev); |
| |
| ld9040_power(lcd, FB_BLANK_POWERDOWN); |
| } |
| |
| static struct spi_driver ld9040_driver = { |
| .driver = { |
| .name = "ld9040", |
| .owner = THIS_MODULE, |
| }, |
| .probe = ld9040_probe, |
| .remove = ld9040_remove, |
| .shutdown = ld9040_shutdown, |
| .suspend = ld9040_suspend, |
| .resume = ld9040_resume, |
| }; |
| |
| module_spi_driver(ld9040_driver); |
| |
| MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>"); |
| MODULE_DESCRIPTION("ld9040 LCD Driver"); |
| MODULE_LICENSE("GPL"); |