| // SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0-only) |
| /* Copyright(c) 2014 - 2020 Intel Corporation */ |
| #include <linux/mutex.h> |
| #include <linux/list.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include "adf_accel_devices.h" |
| #include "adf_cfg.h" |
| #include "adf_common_drv.h" |
| |
| static LIST_HEAD(service_table); |
| static DEFINE_MUTEX(service_lock); |
| |
| static void adf_service_add(struct service_hndl *service) |
| { |
| mutex_lock(&service_lock); |
| list_add(&service->list, &service_table); |
| mutex_unlock(&service_lock); |
| } |
| |
| int adf_service_register(struct service_hndl *service) |
| { |
| memset(service->init_status, 0, sizeof(service->init_status)); |
| memset(service->start_status, 0, sizeof(service->start_status)); |
| adf_service_add(service); |
| return 0; |
| } |
| |
| static void adf_service_remove(struct service_hndl *service) |
| { |
| mutex_lock(&service_lock); |
| list_del(&service->list); |
| mutex_unlock(&service_lock); |
| } |
| |
| int adf_service_unregister(struct service_hndl *service) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(service->init_status); i++) { |
| if (service->init_status[i] || service->start_status[i]) { |
| pr_err("QAT: Could not remove active service\n"); |
| return -EFAULT; |
| } |
| } |
| adf_service_remove(service); |
| return 0; |
| } |
| |
| /** |
| * adf_dev_init() - Init data structures and services for the given accel device |
| * @accel_dev: Pointer to acceleration device. |
| * |
| * Initialize the ring data structures and the admin comms and arbitration |
| * services. |
| * |
| * Return: 0 on success, error code otherwise. |
| */ |
| int adf_dev_init(struct adf_accel_dev *accel_dev) |
| { |
| struct service_hndl *service; |
| struct list_head *list_itr; |
| struct adf_hw_device_data *hw_data = accel_dev->hw_device; |
| int ret; |
| |
| if (!hw_data) { |
| dev_err(&GET_DEV(accel_dev), |
| "Failed to init device - hw_data not set\n"); |
| return -EFAULT; |
| } |
| |
| if (!test_bit(ADF_STATUS_CONFIGURED, &accel_dev->status) && |
| !accel_dev->is_vf) { |
| dev_err(&GET_DEV(accel_dev), "Device not configured\n"); |
| return -EFAULT; |
| } |
| |
| if (adf_init_etr_data(accel_dev)) { |
| dev_err(&GET_DEV(accel_dev), "Failed initialize etr\n"); |
| return -EFAULT; |
| } |
| |
| if (hw_data->init_device && hw_data->init_device(accel_dev)) { |
| dev_err(&GET_DEV(accel_dev), "Failed to initialize device\n"); |
| return -EFAULT; |
| } |
| |
| if (hw_data->init_admin_comms && hw_data->init_admin_comms(accel_dev)) { |
| dev_err(&GET_DEV(accel_dev), "Failed initialize admin comms\n"); |
| return -EFAULT; |
| } |
| |
| if (hw_data->init_arb && hw_data->init_arb(accel_dev)) { |
| dev_err(&GET_DEV(accel_dev), "Failed initialize hw arbiter\n"); |
| return -EFAULT; |
| } |
| |
| if (adf_ae_init(accel_dev)) { |
| dev_err(&GET_DEV(accel_dev), |
| "Failed to initialise Acceleration Engine\n"); |
| return -EFAULT; |
| } |
| set_bit(ADF_STATUS_AE_INITIALISED, &accel_dev->status); |
| |
| if (adf_ae_fw_load(accel_dev)) { |
| dev_err(&GET_DEV(accel_dev), |
| "Failed to load acceleration FW\n"); |
| return -EFAULT; |
| } |
| set_bit(ADF_STATUS_AE_UCODE_LOADED, &accel_dev->status); |
| |
| if (hw_data->alloc_irq(accel_dev)) { |
| dev_err(&GET_DEV(accel_dev), "Failed to allocate interrupts\n"); |
| return -EFAULT; |
| } |
| set_bit(ADF_STATUS_IRQ_ALLOCATED, &accel_dev->status); |
| |
| hw_data->enable_ints(accel_dev); |
| hw_data->enable_error_correction(accel_dev); |
| |
| ret = hw_data->pfvf_ops.enable_comms(accel_dev); |
| if (ret) |
| return ret; |
| |
| if (!test_bit(ADF_STATUS_CONFIGURED, &accel_dev->status) && |
| accel_dev->is_vf) { |
| if (qat_crypto_vf_dev_config(accel_dev)) |
| return -EFAULT; |
| } |
| |
| /* |
| * Subservice initialisation is divided into two stages: init and start. |
| * This is to facilitate any ordering dependencies between services |
| * prior to starting any of the accelerators. |
| */ |
| list_for_each(list_itr, &service_table) { |
| service = list_entry(list_itr, struct service_hndl, list); |
| if (service->event_hld(accel_dev, ADF_EVENT_INIT)) { |
| dev_err(&GET_DEV(accel_dev), |
| "Failed to initialise service %s\n", |
| service->name); |
| return -EFAULT; |
| } |
| set_bit(accel_dev->accel_id, service->init_status); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(adf_dev_init); |
| |
| /** |
| * adf_dev_start() - Start acceleration service for the given accel device |
| * @accel_dev: Pointer to acceleration device. |
| * |
| * Function notifies all the registered services that the acceleration device |
| * is ready to be used. |
| * To be used by QAT device specific drivers. |
| * |
| * Return: 0 on success, error code otherwise. |
| */ |
| int adf_dev_start(struct adf_accel_dev *accel_dev) |
| { |
| struct adf_hw_device_data *hw_data = accel_dev->hw_device; |
| struct service_hndl *service; |
| struct list_head *list_itr; |
| |
| set_bit(ADF_STATUS_STARTING, &accel_dev->status); |
| |
| if (adf_ae_start(accel_dev)) { |
| dev_err(&GET_DEV(accel_dev), "AE Start Failed\n"); |
| return -EFAULT; |
| } |
| set_bit(ADF_STATUS_AE_STARTED, &accel_dev->status); |
| |
| if (hw_data->send_admin_init(accel_dev)) { |
| dev_err(&GET_DEV(accel_dev), "Failed to send init message\n"); |
| return -EFAULT; |
| } |
| |
| /* Set ssm watch dog timer */ |
| if (hw_data->set_ssm_wdtimer) |
| hw_data->set_ssm_wdtimer(accel_dev); |
| |
| /* Enable Power Management */ |
| if (hw_data->enable_pm && hw_data->enable_pm(accel_dev)) { |
| dev_err(&GET_DEV(accel_dev), "Failed to configure Power Management\n"); |
| return -EFAULT; |
| } |
| |
| list_for_each(list_itr, &service_table) { |
| service = list_entry(list_itr, struct service_hndl, list); |
| if (service->event_hld(accel_dev, ADF_EVENT_START)) { |
| dev_err(&GET_DEV(accel_dev), |
| "Failed to start service %s\n", |
| service->name); |
| return -EFAULT; |
| } |
| set_bit(accel_dev->accel_id, service->start_status); |
| } |
| |
| clear_bit(ADF_STATUS_STARTING, &accel_dev->status); |
| set_bit(ADF_STATUS_STARTED, &accel_dev->status); |
| |
| if (!list_empty(&accel_dev->crypto_list) && |
| (qat_algs_register() || qat_asym_algs_register())) { |
| dev_err(&GET_DEV(accel_dev), |
| "Failed to register crypto algs\n"); |
| set_bit(ADF_STATUS_STARTING, &accel_dev->status); |
| clear_bit(ADF_STATUS_STARTED, &accel_dev->status); |
| return -EFAULT; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(adf_dev_start); |
| |
| /** |
| * adf_dev_stop() - Stop acceleration service for the given accel device |
| * @accel_dev: Pointer to acceleration device. |
| * |
| * Function notifies all the registered services that the acceleration device |
| * is shuting down. |
| * To be used by QAT device specific drivers. |
| * |
| * Return: void |
| */ |
| void adf_dev_stop(struct adf_accel_dev *accel_dev) |
| { |
| struct service_hndl *service; |
| struct list_head *list_itr; |
| bool wait = false; |
| int ret; |
| |
| if (!adf_dev_started(accel_dev) && |
| !test_bit(ADF_STATUS_STARTING, &accel_dev->status)) |
| return; |
| |
| clear_bit(ADF_STATUS_STARTING, &accel_dev->status); |
| clear_bit(ADF_STATUS_STARTED, &accel_dev->status); |
| |
| if (!list_empty(&accel_dev->crypto_list)) { |
| qat_algs_unregister(); |
| qat_asym_algs_unregister(); |
| } |
| |
| list_for_each(list_itr, &service_table) { |
| service = list_entry(list_itr, struct service_hndl, list); |
| if (!test_bit(accel_dev->accel_id, service->start_status)) |
| continue; |
| ret = service->event_hld(accel_dev, ADF_EVENT_STOP); |
| if (!ret) { |
| clear_bit(accel_dev->accel_id, service->start_status); |
| } else if (ret == -EAGAIN) { |
| wait = true; |
| clear_bit(accel_dev->accel_id, service->start_status); |
| } |
| } |
| |
| if (wait) |
| msleep(100); |
| |
| if (test_bit(ADF_STATUS_AE_STARTED, &accel_dev->status)) { |
| if (adf_ae_stop(accel_dev)) |
| dev_err(&GET_DEV(accel_dev), "failed to stop AE\n"); |
| else |
| clear_bit(ADF_STATUS_AE_STARTED, &accel_dev->status); |
| } |
| } |
| EXPORT_SYMBOL_GPL(adf_dev_stop); |
| |
| /** |
| * adf_dev_shutdown() - shutdown acceleration services and data strucutures |
| * @accel_dev: Pointer to acceleration device |
| * |
| * Cleanup the ring data structures and the admin comms and arbitration |
| * services. |
| */ |
| void adf_dev_shutdown(struct adf_accel_dev *accel_dev) |
| { |
| struct adf_hw_device_data *hw_data = accel_dev->hw_device; |
| struct service_hndl *service; |
| struct list_head *list_itr; |
| |
| if (!hw_data) { |
| dev_err(&GET_DEV(accel_dev), |
| "QAT: Failed to shutdown device - hw_data not set\n"); |
| return; |
| } |
| |
| if (test_bit(ADF_STATUS_AE_UCODE_LOADED, &accel_dev->status)) { |
| adf_ae_fw_release(accel_dev); |
| clear_bit(ADF_STATUS_AE_UCODE_LOADED, &accel_dev->status); |
| } |
| |
| if (test_bit(ADF_STATUS_AE_INITIALISED, &accel_dev->status)) { |
| if (adf_ae_shutdown(accel_dev)) |
| dev_err(&GET_DEV(accel_dev), |
| "Failed to shutdown Accel Engine\n"); |
| else |
| clear_bit(ADF_STATUS_AE_INITIALISED, |
| &accel_dev->status); |
| } |
| |
| list_for_each(list_itr, &service_table) { |
| service = list_entry(list_itr, struct service_hndl, list); |
| if (!test_bit(accel_dev->accel_id, service->init_status)) |
| continue; |
| if (service->event_hld(accel_dev, ADF_EVENT_SHUTDOWN)) |
| dev_err(&GET_DEV(accel_dev), |
| "Failed to shutdown service %s\n", |
| service->name); |
| else |
| clear_bit(accel_dev->accel_id, service->init_status); |
| } |
| |
| hw_data->disable_iov(accel_dev); |
| |
| if (test_bit(ADF_STATUS_IRQ_ALLOCATED, &accel_dev->status)) { |
| hw_data->free_irq(accel_dev); |
| clear_bit(ADF_STATUS_IRQ_ALLOCATED, &accel_dev->status); |
| } |
| |
| /* Delete configuration only if not restarting */ |
| if (!test_bit(ADF_STATUS_RESTARTING, &accel_dev->status)) |
| adf_cfg_del_all(accel_dev); |
| |
| if (hw_data->exit_arb) |
| hw_data->exit_arb(accel_dev); |
| |
| if (hw_data->exit_admin_comms) |
| hw_data->exit_admin_comms(accel_dev); |
| |
| adf_cleanup_etr_data(accel_dev); |
| adf_dev_restore(accel_dev); |
| } |
| EXPORT_SYMBOL_GPL(adf_dev_shutdown); |
| |
| int adf_dev_restarting_notify(struct adf_accel_dev *accel_dev) |
| { |
| struct service_hndl *service; |
| struct list_head *list_itr; |
| |
| list_for_each(list_itr, &service_table) { |
| service = list_entry(list_itr, struct service_hndl, list); |
| if (service->event_hld(accel_dev, ADF_EVENT_RESTARTING)) |
| dev_err(&GET_DEV(accel_dev), |
| "Failed to restart service %s.\n", |
| service->name); |
| } |
| return 0; |
| } |
| |
| int adf_dev_restarted_notify(struct adf_accel_dev *accel_dev) |
| { |
| struct service_hndl *service; |
| struct list_head *list_itr; |
| |
| list_for_each(list_itr, &service_table) { |
| service = list_entry(list_itr, struct service_hndl, list); |
| if (service->event_hld(accel_dev, ADF_EVENT_RESTARTED)) |
| dev_err(&GET_DEV(accel_dev), |
| "Failed to restart service %s.\n", |
| service->name); |
| } |
| return 0; |
| } |