| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2019 Intel Corporation. |
| |
| #include <asm/unaligned.h> |
| #include <linux/acpi.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-fwnode.h> |
| |
| #define HI556_REG_VALUE_08BIT 1 |
| #define HI556_REG_VALUE_16BIT 2 |
| #define HI556_REG_VALUE_24BIT 3 |
| |
| #define HI556_LINK_FREQ_437MHZ 437000000ULL |
| #define HI556_MCLK 19200000 |
| #define HI556_DATA_LANES 2 |
| #define HI556_RGB_DEPTH 10 |
| |
| #define HI556_REG_CHIP_ID 0x0f16 |
| #define HI556_CHIP_ID 0x0556 |
| |
| #define HI556_REG_MODE_SELECT 0x0a00 |
| #define HI556_MODE_STANDBY 0x0000 |
| #define HI556_MODE_STREAMING 0x0100 |
| |
| /* vertical-timings from sensor */ |
| #define HI556_REG_FLL 0x0006 |
| #define HI556_FLL_30FPS 0x0814 |
| #define HI556_FLL_30FPS_MIN 0x0814 |
| #define HI556_FLL_MAX 0x7fff |
| |
| /* horizontal-timings from sensor */ |
| #define HI556_REG_LLP 0x0008 |
| |
| /* Exposure controls from sensor */ |
| #define HI556_REG_EXPOSURE 0x0074 |
| #define HI556_EXPOSURE_MIN 6 |
| #define HI556_EXPOSURE_MAX_MARGIN 2 |
| #define HI556_EXPOSURE_STEP 1 |
| |
| /* Analog gain controls from sensor */ |
| #define HI556_REG_ANALOG_GAIN 0x0077 |
| #define HI556_ANAL_GAIN_MIN 0 |
| #define HI556_ANAL_GAIN_MAX 240 |
| #define HI556_ANAL_GAIN_STEP 1 |
| |
| /* Digital gain controls from sensor */ |
| #define HI556_REG_MWB_GR_GAIN 0x0078 |
| #define HI556_REG_MWB_GB_GAIN 0x007a |
| #define HI556_REG_MWB_R_GAIN 0x007c |
| #define HI556_REG_MWB_B_GAIN 0x007e |
| #define HI556_DGTL_GAIN_MIN 0 |
| #define HI556_DGTL_GAIN_MAX 2048 |
| #define HI556_DGTL_GAIN_STEP 1 |
| #define HI556_DGTL_GAIN_DEFAULT 256 |
| |
| /* Test Pattern Control */ |
| #define HI556_REG_ISP 0X0a05 |
| #define HI556_REG_ISP_TPG_EN 0x01 |
| #define HI556_REG_TEST_PATTERN 0x0201 |
| |
| enum { |
| HI556_LINK_FREQ_437MHZ_INDEX, |
| }; |
| |
| struct hi556_reg { |
| u16 address; |
| u16 val; |
| }; |
| |
| struct hi556_reg_list { |
| u32 num_of_regs; |
| const struct hi556_reg *regs; |
| }; |
| |
| struct hi556_link_freq_config { |
| const struct hi556_reg_list reg_list; |
| }; |
| |
| struct hi556_mode { |
| /* Frame width in pixels */ |
| u32 width; |
| |
| /* Frame height in pixels */ |
| u32 height; |
| |
| /* Horizontal timining size */ |
| u32 llp; |
| |
| /* Default vertical timining size */ |
| u32 fll_def; |
| |
| /* Min vertical timining size */ |
| u32 fll_min; |
| |
| /* Link frequency needed for this resolution */ |
| u32 link_freq_index; |
| |
| /* Sensor register settings for this resolution */ |
| const struct hi556_reg_list reg_list; |
| }; |
| |
| #define to_hi556(_sd) container_of(_sd, struct hi556, sd) |
| |
| //SENSOR_INITIALIZATION |
| static const struct hi556_reg mipi_data_rate_874mbps[] = { |
| {0x0e00, 0x0102}, |
| {0x0e02, 0x0102}, |
| {0x0e0c, 0x0100}, |
| {0x2000, 0x7400}, |
| {0x2002, 0x001c}, |
| {0x2004, 0x0242}, |
| {0x2006, 0x0942}, |
| {0x2008, 0x7007}, |
| {0x200a, 0x0fd9}, |
| {0x200c, 0x0259}, |
| {0x200e, 0x7008}, |
| {0x2010, 0x160e}, |
| {0x2012, 0x0047}, |
| {0x2014, 0x2118}, |
| {0x2016, 0x0041}, |
| {0x2018, 0x00d8}, |
| {0x201a, 0x0145}, |
| {0x201c, 0x0006}, |
| {0x201e, 0x0181}, |
| {0x2020, 0x13cc}, |
| {0x2022, 0x2057}, |
| {0x2024, 0x7001}, |
| {0x2026, 0x0fca}, |
| {0x2028, 0x00cb}, |
| {0x202a, 0x009f}, |
| {0x202c, 0x7002}, |
| {0x202e, 0x13cc}, |
| {0x2030, 0x019b}, |
| {0x2032, 0x014d}, |
| {0x2034, 0x2987}, |
| {0x2036, 0x2766}, |
| {0x2038, 0x0020}, |
| {0x203a, 0x2060}, |
| {0x203c, 0x0e5d}, |
| {0x203e, 0x181d}, |
| {0x2040, 0x2066}, |
| {0x2042, 0x20c4}, |
| {0x2044, 0x5000}, |
| {0x2046, 0x0005}, |
| {0x2048, 0x0000}, |
| {0x204a, 0x01db}, |
| {0x204c, 0x025a}, |
| {0x204e, 0x00c0}, |
| {0x2050, 0x0005}, |
| {0x2052, 0x0006}, |
| {0x2054, 0x0ad9}, |
| {0x2056, 0x0259}, |
| {0x2058, 0x0618}, |
| {0x205a, 0x0258}, |
| {0x205c, 0x2266}, |
| {0x205e, 0x20c8}, |
| {0x2060, 0x2060}, |
| {0x2062, 0x707b}, |
| {0x2064, 0x0fdd}, |
| {0x2066, 0x81b8}, |
| {0x2068, 0x5040}, |
| {0x206a, 0x0020}, |
| {0x206c, 0x5060}, |
| {0x206e, 0x3143}, |
| {0x2070, 0x5081}, |
| {0x2072, 0x025c}, |
| {0x2074, 0x7800}, |
| {0x2076, 0x7400}, |
| {0x2078, 0x001c}, |
| {0x207a, 0x0242}, |
| {0x207c, 0x0942}, |
| {0x207e, 0x0bd9}, |
| {0x2080, 0x0259}, |
| {0x2082, 0x7008}, |
| {0x2084, 0x160e}, |
| {0x2086, 0x0047}, |
| {0x2088, 0x2118}, |
| {0x208a, 0x0041}, |
| {0x208c, 0x00d8}, |
| {0x208e, 0x0145}, |
| {0x2090, 0x0006}, |
| {0x2092, 0x0181}, |
| {0x2094, 0x13cc}, |
| {0x2096, 0x2057}, |
| {0x2098, 0x7001}, |
| {0x209a, 0x0fca}, |
| {0x209c, 0x00cb}, |
| {0x209e, 0x009f}, |
| {0x20a0, 0x7002}, |
| {0x20a2, 0x13cc}, |
| {0x20a4, 0x019b}, |
| {0x20a6, 0x014d}, |
| {0x20a8, 0x2987}, |
| {0x20aa, 0x2766}, |
| {0x20ac, 0x0020}, |
| {0x20ae, 0x2060}, |
| {0x20b0, 0x0e5d}, |
| {0x20b2, 0x181d}, |
| {0x20b4, 0x2066}, |
| {0x20b6, 0x20c4}, |
| {0x20b8, 0x50a0}, |
| {0x20ba, 0x0005}, |
| {0x20bc, 0x0000}, |
| {0x20be, 0x01db}, |
| {0x20c0, 0x025a}, |
| {0x20c2, 0x00c0}, |
| {0x20c4, 0x0005}, |
| {0x20c6, 0x0006}, |
| {0x20c8, 0x0ad9}, |
| {0x20ca, 0x0259}, |
| {0x20cc, 0x0618}, |
| {0x20ce, 0x0258}, |
| {0x20d0, 0x2266}, |
| {0x20d2, 0x20c8}, |
| {0x20d4, 0x2060}, |
| {0x20d6, 0x707b}, |
| {0x20d8, 0x0fdd}, |
| {0x20da, 0x86b8}, |
| {0x20dc, 0x50e0}, |
| {0x20de, 0x0020}, |
| {0x20e0, 0x5100}, |
| {0x20e2, 0x3143}, |
| {0x20e4, 0x5121}, |
| {0x20e6, 0x7800}, |
| {0x20e8, 0x3140}, |
| {0x20ea, 0x01c4}, |
| {0x20ec, 0x01c1}, |
| {0x20ee, 0x01c0}, |
| {0x20f0, 0x01c4}, |
| {0x20f2, 0x2700}, |
| {0x20f4, 0x3d40}, |
| {0x20f6, 0x7800}, |
| {0x20f8, 0xffff}, |
| {0x27fe, 0xe000}, |
| {0x3000, 0x60f8}, |
| {0x3002, 0x187f}, |
| {0x3004, 0x7060}, |
| {0x3006, 0x0114}, |
| {0x3008, 0x60b0}, |
| {0x300a, 0x1473}, |
| {0x300c, 0x0013}, |
| {0x300e, 0x140f}, |
| {0x3010, 0x0040}, |
| {0x3012, 0x100f}, |
| {0x3014, 0x60f8}, |
| {0x3016, 0x187f}, |
| {0x3018, 0x7060}, |
| {0x301a, 0x0114}, |
| {0x301c, 0x60b0}, |
| {0x301e, 0x1473}, |
| {0x3020, 0x0013}, |
| {0x3022, 0x140f}, |
| {0x3024, 0x0040}, |
| {0x3026, 0x000f}, |
| |
| {0x0b00, 0x0000}, |
| {0x0b02, 0x0045}, |
| {0x0b04, 0xb405}, |
| {0x0b06, 0xc403}, |
| {0x0b08, 0x0081}, |
| {0x0b0a, 0x8252}, |
| {0x0b0c, 0xf814}, |
| {0x0b0e, 0xc618}, |
| {0x0b10, 0xa828}, |
| {0x0b12, 0x004c}, |
| {0x0b14, 0x4068}, |
| {0x0b16, 0x0000}, |
| {0x0f30, 0x5b15}, |
| {0x0f32, 0x7067}, |
| {0x0954, 0x0009}, |
| {0x0956, 0x0000}, |
| {0x0958, 0xbb80}, |
| {0x095a, 0x5140}, |
| {0x0c00, 0x1110}, |
| {0x0c02, 0x0011}, |
| {0x0c04, 0x0000}, |
| {0x0c06, 0x0200}, |
| {0x0c10, 0x0040}, |
| {0x0c12, 0x0040}, |
| {0x0c14, 0x0040}, |
| {0x0c16, 0x0040}, |
| {0x0a10, 0x4000}, |
| {0x3068, 0xf800}, |
| {0x306a, 0xf876}, |
| {0x006c, 0x0000}, |
| {0x005e, 0x0200}, |
| {0x000e, 0x0100}, |
| {0x0e0a, 0x0001}, |
| {0x004a, 0x0100}, |
| {0x004c, 0x0000}, |
| {0x004e, 0x0100}, |
| {0x000c, 0x0022}, |
| {0x0008, 0x0b00}, |
| {0x005a, 0x0202}, |
| {0x0012, 0x000e}, |
| {0x0018, 0x0a33}, |
| {0x0022, 0x0008}, |
| {0x0028, 0x0017}, |
| {0x0024, 0x0028}, |
| {0x002a, 0x002d}, |
| {0x0026, 0x0030}, |
| {0x002c, 0x07c9}, |
| {0x002e, 0x1111}, |
| {0x0030, 0x1111}, |
| {0x0032, 0x1111}, |
| {0x0006, 0x07bc}, |
| {0x0a22, 0x0000}, |
| {0x0a12, 0x0a20}, |
| {0x0a14, 0x0798}, |
| {0x003e, 0x0000}, |
| {0x0074, 0x080e}, |
| {0x0070, 0x0407}, |
| {0x0002, 0x0000}, |
| {0x0a02, 0x0100}, |
| {0x0a24, 0x0100}, |
| {0x0046, 0x0000}, |
| {0x0076, 0x0000}, |
| {0x0060, 0x0000}, |
| {0x0062, 0x0530}, |
| {0x0064, 0x0500}, |
| {0x0066, 0x0530}, |
| {0x0068, 0x0500}, |
| {0x0122, 0x0300}, |
| {0x015a, 0xff08}, |
| {0x0804, 0x0300}, |
| {0x0806, 0x0100}, |
| {0x005c, 0x0102}, |
| {0x0a1a, 0x0800}, |
| }; |
| |
| static const struct hi556_reg mode_2592x1944_regs[] = { |
| {0x0a00, 0x0000}, |
| {0x0b0a, 0x8252}, |
| {0x0f30, 0x5b15}, |
| {0x0f32, 0x7067}, |
| {0x004a, 0x0100}, |
| {0x004c, 0x0000}, |
| {0x004e, 0x0100}, |
| {0x000c, 0x0022}, |
| {0x0008, 0x0b00}, |
| {0x005a, 0x0202}, |
| {0x0012, 0x000e}, |
| {0x0018, 0x0a33}, |
| {0x0022, 0x0008}, |
| {0x0028, 0x0017}, |
| {0x0024, 0x0028}, |
| {0x002a, 0x002d}, |
| {0x0026, 0x0030}, |
| {0x002c, 0x07c9}, |
| {0x002e, 0x1111}, |
| {0x0030, 0x1111}, |
| {0x0032, 0x1111}, |
| {0x0006, 0x0814}, |
| {0x0a22, 0x0000}, |
| {0x0a12, 0x0a20}, |
| {0x0a14, 0x0798}, |
| {0x003e, 0x0000}, |
| {0x0074, 0x0812}, |
| {0x0070, 0x0409}, |
| {0x0804, 0x0300}, |
| {0x0806, 0x0100}, |
| {0x0a04, 0x014a}, |
| {0x090c, 0x0fdc}, |
| {0x090e, 0x002d}, |
| |
| {0x0902, 0x4319}, |
| {0x0914, 0xc10a}, |
| {0x0916, 0x071f}, |
| {0x0918, 0x0408}, |
| {0x091a, 0x0c0d}, |
| {0x091c, 0x0f09}, |
| {0x091e, 0x0a00}, |
| {0x0958, 0xbb80}, |
| }; |
| |
| static const struct hi556_reg mode_1296x972_regs[] = { |
| {0x0a00, 0x0000}, |
| {0x0b0a, 0x8259}, |
| {0x0f30, 0x5b15}, |
| {0x0f32, 0x7167}, |
| {0x004a, 0x0100}, |
| {0x004c, 0x0000}, |
| {0x004e, 0x0100}, |
| {0x000c, 0x0122}, |
| {0x0008, 0x0b00}, |
| {0x005a, 0x0404}, |
| {0x0012, 0x000c}, |
| {0x0018, 0x0a33}, |
| {0x0022, 0x0008}, |
| {0x0028, 0x0017}, |
| {0x0024, 0x0022}, |
| {0x002a, 0x002b}, |
| {0x0026, 0x0030}, |
| {0x002c, 0x07c9}, |
| {0x002e, 0x3311}, |
| {0x0030, 0x3311}, |
| {0x0032, 0x3311}, |
| {0x0006, 0x0814}, |
| {0x0a22, 0x0000}, |
| {0x0a12, 0x0510}, |
| {0x0a14, 0x03cc}, |
| {0x003e, 0x0000}, |
| {0x0074, 0x0812}, |
| {0x0070, 0x0409}, |
| {0x0804, 0x0308}, |
| {0x0806, 0x0100}, |
| {0x0a04, 0x016a}, |
| {0x090e, 0x0010}, |
| {0x090c, 0x09c0}, |
| |
| {0x0902, 0x4319}, |
| {0x0914, 0xc106}, |
| {0x0916, 0x040e}, |
| {0x0918, 0x0304}, |
| {0x091a, 0x0708}, |
| {0x091c, 0x0e06}, |
| {0x091e, 0x0300}, |
| {0x0958, 0xbb80}, |
| }; |
| |
| static const char * const hi556_test_pattern_menu[] = { |
| "Disabled", |
| "Solid Colour", |
| "100% Colour Bars", |
| "Fade To Grey Colour Bars", |
| "PN9", |
| "Gradient Horizontal", |
| "Gradient Vertical", |
| "Check Board", |
| "Slant Pattern", |
| }; |
| |
| static const s64 link_freq_menu_items[] = { |
| HI556_LINK_FREQ_437MHZ, |
| }; |
| |
| static const struct hi556_link_freq_config link_freq_configs[] = { |
| [HI556_LINK_FREQ_437MHZ_INDEX] = { |
| .reg_list = { |
| .num_of_regs = ARRAY_SIZE(mipi_data_rate_874mbps), |
| .regs = mipi_data_rate_874mbps, |
| } |
| } |
| }; |
| |
| static const struct hi556_mode supported_modes[] = { |
| { |
| .width = 2592, |
| .height = 1944, |
| .fll_def = HI556_FLL_30FPS, |
| .fll_min = HI556_FLL_30FPS_MIN, |
| .llp = 0x0b00, |
| .reg_list = { |
| .num_of_regs = ARRAY_SIZE(mode_2592x1944_regs), |
| .regs = mode_2592x1944_regs, |
| }, |
| .link_freq_index = HI556_LINK_FREQ_437MHZ_INDEX, |
| }, |
| { |
| .width = 1296, |
| .height = 972, |
| .fll_def = HI556_FLL_30FPS, |
| .fll_min = HI556_FLL_30FPS_MIN, |
| .llp = 0x0b00, |
| .reg_list = { |
| .num_of_regs = ARRAY_SIZE(mode_1296x972_regs), |
| .regs = mode_1296x972_regs, |
| }, |
| .link_freq_index = HI556_LINK_FREQ_437MHZ_INDEX, |
| } |
| }; |
| |
| struct hi556 { |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_ctrl_handler ctrl_handler; |
| |
| /* V4L2 Controls */ |
| struct v4l2_ctrl *link_freq; |
| struct v4l2_ctrl *pixel_rate; |
| struct v4l2_ctrl *vblank; |
| struct v4l2_ctrl *hblank; |
| struct v4l2_ctrl *exposure; |
| |
| /* Current mode */ |
| const struct hi556_mode *cur_mode; |
| |
| /* To serialize asynchronus callbacks */ |
| struct mutex mutex; |
| |
| /* Streaming on/off */ |
| bool streaming; |
| |
| /* True if the device has been identified */ |
| bool identified; |
| }; |
| |
| static u64 to_pixel_rate(u32 f_index) |
| { |
| u64 pixel_rate = link_freq_menu_items[f_index] * 2 * HI556_DATA_LANES; |
| |
| do_div(pixel_rate, HI556_RGB_DEPTH); |
| |
| return pixel_rate; |
| } |
| |
| static int hi556_read_reg(struct hi556 *hi556, u16 reg, u16 len, u32 *val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd); |
| struct i2c_msg msgs[2]; |
| u8 addr_buf[2]; |
| u8 data_buf[4] = {0}; |
| int ret; |
| |
| if (len > 4) |
| return -EINVAL; |
| |
| put_unaligned_be16(reg, addr_buf); |
| msgs[0].addr = client->addr; |
| msgs[0].flags = 0; |
| msgs[0].len = sizeof(addr_buf); |
| msgs[0].buf = addr_buf; |
| msgs[1].addr = client->addr; |
| msgs[1].flags = I2C_M_RD; |
| msgs[1].len = len; |
| msgs[1].buf = &data_buf[4 - len]; |
| |
| ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| if (ret != ARRAY_SIZE(msgs)) |
| return -EIO; |
| |
| *val = get_unaligned_be32(data_buf); |
| |
| return 0; |
| } |
| |
| static int hi556_write_reg(struct hi556 *hi556, u16 reg, u16 len, u32 val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd); |
| u8 buf[6]; |
| |
| if (len > 4) |
| return -EINVAL; |
| |
| put_unaligned_be16(reg, buf); |
| put_unaligned_be32(val << 8 * (4 - len), buf + 2); |
| if (i2c_master_send(client, buf, len + 2) != len + 2) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int hi556_write_reg_list(struct hi556 *hi556, |
| const struct hi556_reg_list *r_list) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd); |
| unsigned int i; |
| int ret; |
| |
| for (i = 0; i < r_list->num_of_regs; i++) { |
| ret = hi556_write_reg(hi556, r_list->regs[i].address, |
| HI556_REG_VALUE_16BIT, |
| r_list->regs[i].val); |
| if (ret) { |
| dev_err_ratelimited(&client->dev, |
| "failed to write reg 0x%4.4x. error = %d", |
| r_list->regs[i].address, ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int hi556_update_digital_gain(struct hi556 *hi556, u32 d_gain) |
| { |
| int ret; |
| |
| ret = hi556_write_reg(hi556, HI556_REG_MWB_GR_GAIN, |
| HI556_REG_VALUE_16BIT, d_gain); |
| if (ret) |
| return ret; |
| |
| ret = hi556_write_reg(hi556, HI556_REG_MWB_GB_GAIN, |
| HI556_REG_VALUE_16BIT, d_gain); |
| if (ret) |
| return ret; |
| |
| ret = hi556_write_reg(hi556, HI556_REG_MWB_R_GAIN, |
| HI556_REG_VALUE_16BIT, d_gain); |
| if (ret) |
| return ret; |
| |
| return hi556_write_reg(hi556, HI556_REG_MWB_B_GAIN, |
| HI556_REG_VALUE_16BIT, d_gain); |
| } |
| |
| static int hi556_test_pattern(struct hi556 *hi556, u32 pattern) |
| { |
| int ret; |
| u32 val; |
| |
| if (pattern) { |
| ret = hi556_read_reg(hi556, HI556_REG_ISP, |
| HI556_REG_VALUE_08BIT, &val); |
| if (ret) |
| return ret; |
| |
| ret = hi556_write_reg(hi556, HI556_REG_ISP, |
| HI556_REG_VALUE_08BIT, |
| val | HI556_REG_ISP_TPG_EN); |
| if (ret) |
| return ret; |
| } |
| |
| return hi556_write_reg(hi556, HI556_REG_TEST_PATTERN, |
| HI556_REG_VALUE_08BIT, pattern); |
| } |
| |
| static int hi556_set_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct hi556 *hi556 = container_of(ctrl->handler, |
| struct hi556, ctrl_handler); |
| struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd); |
| s64 exposure_max; |
| int ret = 0; |
| |
| /* Propagate change of current control to all related controls */ |
| if (ctrl->id == V4L2_CID_VBLANK) { |
| /* Update max exposure while meeting expected vblanking */ |
| exposure_max = hi556->cur_mode->height + ctrl->val - |
| HI556_EXPOSURE_MAX_MARGIN; |
| __v4l2_ctrl_modify_range(hi556->exposure, |
| hi556->exposure->minimum, |
| exposure_max, hi556->exposure->step, |
| exposure_max); |
| } |
| |
| /* V4L2 controls values will be applied only when power is already up */ |
| if (!pm_runtime_get_if_in_use(&client->dev)) |
| return 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_ANALOGUE_GAIN: |
| ret = hi556_write_reg(hi556, HI556_REG_ANALOG_GAIN, |
| HI556_REG_VALUE_16BIT, ctrl->val); |
| break; |
| |
| case V4L2_CID_DIGITAL_GAIN: |
| ret = hi556_update_digital_gain(hi556, ctrl->val); |
| break; |
| |
| case V4L2_CID_EXPOSURE: |
| ret = hi556_write_reg(hi556, HI556_REG_EXPOSURE, |
| HI556_REG_VALUE_16BIT, ctrl->val); |
| break; |
| |
| case V4L2_CID_VBLANK: |
| /* Update FLL that meets expected vertical blanking */ |
| ret = hi556_write_reg(hi556, HI556_REG_FLL, |
| HI556_REG_VALUE_16BIT, |
| hi556->cur_mode->height + ctrl->val); |
| break; |
| |
| case V4L2_CID_TEST_PATTERN: |
| ret = hi556_test_pattern(hi556, ctrl->val); |
| break; |
| |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| pm_runtime_put(&client->dev); |
| |
| return ret; |
| } |
| |
| static const struct v4l2_ctrl_ops hi556_ctrl_ops = { |
| .s_ctrl = hi556_set_ctrl, |
| }; |
| |
| static int hi556_init_controls(struct hi556 *hi556) |
| { |
| struct v4l2_ctrl_handler *ctrl_hdlr; |
| s64 exposure_max, h_blank; |
| int ret; |
| |
| ctrl_hdlr = &hi556->ctrl_handler; |
| ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8); |
| if (ret) |
| return ret; |
| |
| ctrl_hdlr->lock = &hi556->mutex; |
| hi556->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &hi556_ctrl_ops, |
| V4L2_CID_LINK_FREQ, |
| ARRAY_SIZE(link_freq_menu_items) - 1, |
| 0, link_freq_menu_items); |
| if (hi556->link_freq) |
| hi556->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| hi556->pixel_rate = v4l2_ctrl_new_std |
| (ctrl_hdlr, &hi556_ctrl_ops, |
| V4L2_CID_PIXEL_RATE, 0, |
| to_pixel_rate(HI556_LINK_FREQ_437MHZ_INDEX), |
| 1, |
| to_pixel_rate(HI556_LINK_FREQ_437MHZ_INDEX)); |
| hi556->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &hi556_ctrl_ops, |
| V4L2_CID_VBLANK, |
| hi556->cur_mode->fll_min - |
| hi556->cur_mode->height, |
| HI556_FLL_MAX - |
| hi556->cur_mode->height, 1, |
| hi556->cur_mode->fll_def - |
| hi556->cur_mode->height); |
| |
| h_blank = hi556->cur_mode->llp - hi556->cur_mode->width; |
| |
| hi556->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &hi556_ctrl_ops, |
| V4L2_CID_HBLANK, h_blank, h_blank, 1, |
| h_blank); |
| if (hi556->hblank) |
| hi556->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| v4l2_ctrl_new_std(ctrl_hdlr, &hi556_ctrl_ops, V4L2_CID_ANALOGUE_GAIN, |
| HI556_ANAL_GAIN_MIN, HI556_ANAL_GAIN_MAX, |
| HI556_ANAL_GAIN_STEP, HI556_ANAL_GAIN_MIN); |
| v4l2_ctrl_new_std(ctrl_hdlr, &hi556_ctrl_ops, V4L2_CID_DIGITAL_GAIN, |
| HI556_DGTL_GAIN_MIN, HI556_DGTL_GAIN_MAX, |
| HI556_DGTL_GAIN_STEP, HI556_DGTL_GAIN_DEFAULT); |
| exposure_max = hi556->cur_mode->fll_def - HI556_EXPOSURE_MAX_MARGIN; |
| hi556->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &hi556_ctrl_ops, |
| V4L2_CID_EXPOSURE, |
| HI556_EXPOSURE_MIN, exposure_max, |
| HI556_EXPOSURE_STEP, |
| exposure_max); |
| v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &hi556_ctrl_ops, |
| V4L2_CID_TEST_PATTERN, |
| ARRAY_SIZE(hi556_test_pattern_menu) - 1, |
| 0, 0, hi556_test_pattern_menu); |
| if (ctrl_hdlr->error) |
| return ctrl_hdlr->error; |
| |
| hi556->sd.ctrl_handler = ctrl_hdlr; |
| |
| return 0; |
| } |
| |
| static void hi556_assign_pad_format(const struct hi556_mode *mode, |
| struct v4l2_mbus_framefmt *fmt) |
| { |
| fmt->width = mode->width; |
| fmt->height = mode->height; |
| fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10; |
| fmt->field = V4L2_FIELD_NONE; |
| } |
| |
| static int hi556_identify_module(struct hi556 *hi556) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd); |
| int ret; |
| u32 val; |
| |
| if (hi556->identified) |
| return 0; |
| |
| ret = hi556_read_reg(hi556, HI556_REG_CHIP_ID, |
| HI556_REG_VALUE_16BIT, &val); |
| if (ret) |
| return ret; |
| |
| if (val != HI556_CHIP_ID) { |
| dev_err(&client->dev, "chip id mismatch: %x!=%x", |
| HI556_CHIP_ID, val); |
| return -ENXIO; |
| } |
| |
| hi556->identified = true; |
| |
| return 0; |
| } |
| |
| static int hi556_start_streaming(struct hi556 *hi556) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd); |
| const struct hi556_reg_list *reg_list; |
| int link_freq_index, ret; |
| |
| ret = hi556_identify_module(hi556); |
| if (ret) |
| return ret; |
| |
| link_freq_index = hi556->cur_mode->link_freq_index; |
| reg_list = &link_freq_configs[link_freq_index].reg_list; |
| ret = hi556_write_reg_list(hi556, reg_list); |
| if (ret) { |
| dev_err(&client->dev, "failed to set plls"); |
| return ret; |
| } |
| |
| reg_list = &hi556->cur_mode->reg_list; |
| ret = hi556_write_reg_list(hi556, reg_list); |
| if (ret) { |
| dev_err(&client->dev, "failed to set mode"); |
| return ret; |
| } |
| |
| ret = __v4l2_ctrl_handler_setup(hi556->sd.ctrl_handler); |
| if (ret) |
| return ret; |
| |
| ret = hi556_write_reg(hi556, HI556_REG_MODE_SELECT, |
| HI556_REG_VALUE_16BIT, HI556_MODE_STREAMING); |
| |
| if (ret) { |
| dev_err(&client->dev, "failed to set stream"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void hi556_stop_streaming(struct hi556 *hi556) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd); |
| |
| if (hi556_write_reg(hi556, HI556_REG_MODE_SELECT, |
| HI556_REG_VALUE_16BIT, HI556_MODE_STANDBY)) |
| dev_err(&client->dev, "failed to set stream"); |
| } |
| |
| static int hi556_set_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct hi556 *hi556 = to_hi556(sd); |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int ret = 0; |
| |
| if (hi556->streaming == enable) |
| return 0; |
| |
| mutex_lock(&hi556->mutex); |
| if (enable) { |
| ret = pm_runtime_resume_and_get(&client->dev); |
| if (ret < 0) { |
| mutex_unlock(&hi556->mutex); |
| return ret; |
| } |
| |
| ret = hi556_start_streaming(hi556); |
| if (ret) { |
| enable = 0; |
| hi556_stop_streaming(hi556); |
| pm_runtime_put(&client->dev); |
| } |
| } else { |
| hi556_stop_streaming(hi556); |
| pm_runtime_put(&client->dev); |
| } |
| |
| hi556->streaming = enable; |
| mutex_unlock(&hi556->mutex); |
| |
| return ret; |
| } |
| |
| static int __maybe_unused hi556_suspend(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct hi556 *hi556 = to_hi556(sd); |
| |
| mutex_lock(&hi556->mutex); |
| if (hi556->streaming) |
| hi556_stop_streaming(hi556); |
| |
| mutex_unlock(&hi556->mutex); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused hi556_resume(struct device *dev) |
| { |
| struct v4l2_subdev *sd = dev_get_drvdata(dev); |
| struct hi556 *hi556 = to_hi556(sd); |
| int ret; |
| |
| mutex_lock(&hi556->mutex); |
| if (hi556->streaming) { |
| ret = hi556_start_streaming(hi556); |
| if (ret) |
| goto error; |
| } |
| |
| mutex_unlock(&hi556->mutex); |
| |
| return 0; |
| |
| error: |
| hi556_stop_streaming(hi556); |
| hi556->streaming = 0; |
| mutex_unlock(&hi556->mutex); |
| return ret; |
| } |
| |
| static int hi556_set_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct hi556 *hi556 = to_hi556(sd); |
| const struct hi556_mode *mode; |
| s32 vblank_def, h_blank; |
| |
| mode = v4l2_find_nearest_size(supported_modes, |
| ARRAY_SIZE(supported_modes), width, |
| height, fmt->format.width, |
| fmt->format.height); |
| |
| mutex_lock(&hi556->mutex); |
| hi556_assign_pad_format(mode, &fmt->format); |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| *v4l2_subdev_get_try_format(sd, sd_state, fmt->pad) = fmt->format; |
| } else { |
| hi556->cur_mode = mode; |
| __v4l2_ctrl_s_ctrl(hi556->link_freq, mode->link_freq_index); |
| __v4l2_ctrl_s_ctrl_int64(hi556->pixel_rate, |
| to_pixel_rate(mode->link_freq_index)); |
| |
| /* Update limits and set FPS to default */ |
| vblank_def = mode->fll_def - mode->height; |
| __v4l2_ctrl_modify_range(hi556->vblank, |
| mode->fll_min - mode->height, |
| HI556_FLL_MAX - mode->height, 1, |
| vblank_def); |
| __v4l2_ctrl_s_ctrl(hi556->vblank, vblank_def); |
| |
| h_blank = hi556->cur_mode->llp - hi556->cur_mode->width; |
| |
| __v4l2_ctrl_modify_range(hi556->hblank, h_blank, h_blank, 1, |
| h_blank); |
| } |
| |
| mutex_unlock(&hi556->mutex); |
| |
| return 0; |
| } |
| |
| static int hi556_get_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct hi556 *hi556 = to_hi556(sd); |
| |
| mutex_lock(&hi556->mutex); |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) |
| fmt->format = *v4l2_subdev_get_try_format(&hi556->sd, |
| sd_state, |
| fmt->pad); |
| else |
| hi556_assign_pad_format(hi556->cur_mode, &fmt->format); |
| |
| mutex_unlock(&hi556->mutex); |
| |
| return 0; |
| } |
| |
| static int hi556_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->index > 0) |
| return -EINVAL; |
| |
| code->code = MEDIA_BUS_FMT_SGRBG10_1X10; |
| |
| return 0; |
| } |
| |
| static int hi556_enum_frame_size(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| if (fse->index >= ARRAY_SIZE(supported_modes)) |
| return -EINVAL; |
| |
| if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10) |
| return -EINVAL; |
| |
| fse->min_width = supported_modes[fse->index].width; |
| fse->max_width = fse->min_width; |
| fse->min_height = supported_modes[fse->index].height; |
| fse->max_height = fse->min_height; |
| |
| return 0; |
| } |
| |
| static int hi556_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| { |
| struct hi556 *hi556 = to_hi556(sd); |
| |
| mutex_lock(&hi556->mutex); |
| hi556_assign_pad_format(&supported_modes[0], |
| v4l2_subdev_get_try_format(sd, fh->state, 0)); |
| mutex_unlock(&hi556->mutex); |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_video_ops hi556_video_ops = { |
| .s_stream = hi556_set_stream, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops hi556_pad_ops = { |
| .set_fmt = hi556_set_format, |
| .get_fmt = hi556_get_format, |
| .enum_mbus_code = hi556_enum_mbus_code, |
| .enum_frame_size = hi556_enum_frame_size, |
| }; |
| |
| static const struct v4l2_subdev_ops hi556_subdev_ops = { |
| .video = &hi556_video_ops, |
| .pad = &hi556_pad_ops, |
| }; |
| |
| static const struct media_entity_operations hi556_subdev_entity_ops = { |
| .link_validate = v4l2_subdev_link_validate, |
| }; |
| |
| static const struct v4l2_subdev_internal_ops hi556_internal_ops = { |
| .open = hi556_open, |
| }; |
| |
| static int hi556_check_hwcfg(struct device *dev) |
| { |
| struct fwnode_handle *ep; |
| struct fwnode_handle *fwnode = dev_fwnode(dev); |
| struct v4l2_fwnode_endpoint bus_cfg = { |
| .bus_type = V4L2_MBUS_CSI2_DPHY |
| }; |
| u32 mclk; |
| int ret = 0; |
| unsigned int i, j; |
| |
| if (!fwnode) |
| return -ENXIO; |
| |
| ret = fwnode_property_read_u32(fwnode, "clock-frequency", &mclk); |
| if (ret) { |
| dev_err(dev, "can't get clock frequency"); |
| return ret; |
| } |
| |
| if (mclk != HI556_MCLK) { |
| dev_err(dev, "external clock %d is not supported", mclk); |
| return -EINVAL; |
| } |
| |
| ep = fwnode_graph_get_next_endpoint(fwnode, NULL); |
| if (!ep) |
| return -ENXIO; |
| |
| ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); |
| fwnode_handle_put(ep); |
| if (ret) |
| return ret; |
| |
| if (bus_cfg.bus.mipi_csi2.num_data_lanes != 2) { |
| dev_err(dev, "number of CSI2 data lanes %d is not supported", |
| bus_cfg.bus.mipi_csi2.num_data_lanes); |
| ret = -EINVAL; |
| goto check_hwcfg_error; |
| } |
| |
| if (!bus_cfg.nr_of_link_frequencies) { |
| dev_err(dev, "no link frequencies defined"); |
| ret = -EINVAL; |
| goto check_hwcfg_error; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) { |
| for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) { |
| if (link_freq_menu_items[i] == |
| bus_cfg.link_frequencies[j]) |
| break; |
| } |
| |
| if (j == bus_cfg.nr_of_link_frequencies) { |
| dev_err(dev, "no link frequency %lld supported", |
| link_freq_menu_items[i]); |
| ret = -EINVAL; |
| goto check_hwcfg_error; |
| } |
| } |
| |
| check_hwcfg_error: |
| v4l2_fwnode_endpoint_free(&bus_cfg); |
| |
| return ret; |
| } |
| |
| static int hi556_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct hi556 *hi556 = to_hi556(sd); |
| |
| v4l2_async_unregister_subdev(sd); |
| media_entity_cleanup(&sd->entity); |
| v4l2_ctrl_handler_free(sd->ctrl_handler); |
| pm_runtime_disable(&client->dev); |
| mutex_destroy(&hi556->mutex); |
| |
| return 0; |
| } |
| |
| static int hi556_probe(struct i2c_client *client) |
| { |
| struct hi556 *hi556; |
| bool full_power; |
| int ret; |
| |
| ret = hi556_check_hwcfg(&client->dev); |
| if (ret) { |
| dev_err(&client->dev, "failed to check HW configuration: %d", |
| ret); |
| return ret; |
| } |
| |
| hi556 = devm_kzalloc(&client->dev, sizeof(*hi556), GFP_KERNEL); |
| if (!hi556) |
| return -ENOMEM; |
| |
| v4l2_i2c_subdev_init(&hi556->sd, client, &hi556_subdev_ops); |
| |
| full_power = acpi_dev_state_d0(&client->dev); |
| if (full_power) { |
| ret = hi556_identify_module(hi556); |
| if (ret) { |
| dev_err(&client->dev, "failed to find sensor: %d", ret); |
| return ret; |
| } |
| } |
| |
| mutex_init(&hi556->mutex); |
| hi556->cur_mode = &supported_modes[0]; |
| ret = hi556_init_controls(hi556); |
| if (ret) { |
| dev_err(&client->dev, "failed to init controls: %d", ret); |
| goto probe_error_v4l2_ctrl_handler_free; |
| } |
| |
| hi556->sd.internal_ops = &hi556_internal_ops; |
| hi556->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| hi556->sd.entity.ops = &hi556_subdev_entity_ops; |
| hi556->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| hi556->pad.flags = MEDIA_PAD_FL_SOURCE; |
| ret = media_entity_pads_init(&hi556->sd.entity, 1, &hi556->pad); |
| if (ret) { |
| dev_err(&client->dev, "failed to init entity pads: %d", ret); |
| goto probe_error_v4l2_ctrl_handler_free; |
| } |
| |
| ret = v4l2_async_register_subdev_sensor(&hi556->sd); |
| if (ret < 0) { |
| dev_err(&client->dev, "failed to register V4L2 subdev: %d", |
| ret); |
| goto probe_error_media_entity_cleanup; |
| } |
| |
| /* Set the device's state to active if it's in D0 state. */ |
| if (full_power) |
| pm_runtime_set_active(&client->dev); |
| pm_runtime_enable(&client->dev); |
| pm_runtime_idle(&client->dev); |
| |
| return 0; |
| |
| probe_error_media_entity_cleanup: |
| media_entity_cleanup(&hi556->sd.entity); |
| |
| probe_error_v4l2_ctrl_handler_free: |
| v4l2_ctrl_handler_free(hi556->sd.ctrl_handler); |
| mutex_destroy(&hi556->mutex); |
| |
| return ret; |
| } |
| |
| static const struct dev_pm_ops hi556_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(hi556_suspend, hi556_resume) |
| }; |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id hi556_acpi_ids[] = { |
| {"INT3537"}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(acpi, hi556_acpi_ids); |
| #endif |
| |
| static struct i2c_driver hi556_i2c_driver = { |
| .driver = { |
| .name = "hi556", |
| .pm = &hi556_pm_ops, |
| .acpi_match_table = ACPI_PTR(hi556_acpi_ids), |
| }, |
| .probe_new = hi556_probe, |
| .remove = hi556_remove, |
| .flags = I2C_DRV_ACPI_WAIVE_D0_PROBE, |
| }; |
| |
| module_i2c_driver(hi556_i2c_driver); |
| |
| MODULE_AUTHOR("Shawn Tu <shawnx.tu@intel.com>"); |
| MODULE_DESCRIPTION("Hynix HI556 sensor driver"); |
| MODULE_LICENSE("GPL v2"); |