| // SPDX-License-Identifier: GPL-2.0-only |
| /****************************************************************************** |
| ******************************************************************************* |
| ** |
| ** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved. |
| ** Copyright (C) 2004-2011 Red Hat, Inc. All rights reserved. |
| ** |
| ** |
| ******************************************************************************* |
| ******************************************************************************/ |
| |
| #include "dlm_internal.h" |
| #include "lockspace.h" |
| #include "member.h" |
| #include "dir.h" |
| #include "ast.h" |
| #include "recover.h" |
| #include "lowcomms.h" |
| #include "lock.h" |
| #include "requestqueue.h" |
| #include "recoverd.h" |
| |
| |
| /* If the start for which we're re-enabling locking (seq) has been superseded |
| by a newer stop (ls_recover_seq), we need to leave locking disabled. |
| |
| We suspend dlm_recv threads here to avoid the race where dlm_recv a) sees |
| locking stopped and b) adds a message to the requestqueue, but dlm_recoverd |
| enables locking and clears the requestqueue between a and b. */ |
| |
| static int enable_locking(struct dlm_ls *ls, uint64_t seq) |
| { |
| int error = -EINTR; |
| |
| down_write(&ls->ls_recv_active); |
| |
| spin_lock(&ls->ls_recover_lock); |
| if (ls->ls_recover_seq == seq) { |
| set_bit(LSFL_RUNNING, &ls->ls_flags); |
| /* unblocks processes waiting to enter the dlm */ |
| up_write(&ls->ls_in_recovery); |
| clear_bit(LSFL_RECOVER_LOCK, &ls->ls_flags); |
| error = 0; |
| } |
| spin_unlock(&ls->ls_recover_lock); |
| |
| up_write(&ls->ls_recv_active); |
| return error; |
| } |
| |
| static int ls_recover(struct dlm_ls *ls, struct dlm_recover *rv) |
| { |
| unsigned long start; |
| int error, neg = 0; |
| |
| log_rinfo(ls, "dlm_recover %llu", (unsigned long long)rv->seq); |
| |
| mutex_lock(&ls->ls_recoverd_active); |
| |
| dlm_callback_suspend(ls); |
| |
| dlm_clear_toss(ls); |
| |
| /* |
| * This list of root rsb's will be the basis of most of the recovery |
| * routines. |
| */ |
| |
| dlm_create_root_list(ls); |
| |
| /* |
| * Add or remove nodes from the lockspace's ls_nodes list. |
| */ |
| |
| error = dlm_recover_members(ls, rv, &neg); |
| if (error) { |
| log_rinfo(ls, "dlm_recover_members error %d", error); |
| goto fail; |
| } |
| |
| dlm_recover_dir_nodeid(ls); |
| |
| ls->ls_recover_dir_sent_res = 0; |
| ls->ls_recover_dir_sent_msg = 0; |
| ls->ls_recover_locks_in = 0; |
| |
| dlm_set_recover_status(ls, DLM_RS_NODES); |
| |
| error = dlm_recover_members_wait(ls); |
| if (error) { |
| log_rinfo(ls, "dlm_recover_members_wait error %d", error); |
| goto fail; |
| } |
| |
| start = jiffies; |
| |
| /* |
| * Rebuild our own share of the directory by collecting from all other |
| * nodes their master rsb names that hash to us. |
| */ |
| |
| error = dlm_recover_directory(ls); |
| if (error) { |
| log_rinfo(ls, "dlm_recover_directory error %d", error); |
| goto fail; |
| } |
| |
| dlm_set_recover_status(ls, DLM_RS_DIR); |
| |
| error = dlm_recover_directory_wait(ls); |
| if (error) { |
| log_rinfo(ls, "dlm_recover_directory_wait error %d", error); |
| goto fail; |
| } |
| |
| log_rinfo(ls, "dlm_recover_directory %u out %u messages", |
| ls->ls_recover_dir_sent_res, ls->ls_recover_dir_sent_msg); |
| |
| /* |
| * We may have outstanding operations that are waiting for a reply from |
| * a failed node. Mark these to be resent after recovery. Unlock and |
| * cancel ops can just be completed. |
| */ |
| |
| dlm_recover_waiters_pre(ls); |
| |
| if (dlm_recovery_stopped(ls)) { |
| error = -EINTR; |
| goto fail; |
| } |
| |
| if (neg || dlm_no_directory(ls)) { |
| /* |
| * Clear lkb's for departed nodes. |
| */ |
| |
| dlm_recover_purge(ls); |
| |
| /* |
| * Get new master nodeid's for rsb's that were mastered on |
| * departed nodes. |
| */ |
| |
| error = dlm_recover_masters(ls); |
| if (error) { |
| log_rinfo(ls, "dlm_recover_masters error %d", error); |
| goto fail; |
| } |
| |
| /* |
| * Send our locks on remastered rsb's to the new masters. |
| */ |
| |
| error = dlm_recover_locks(ls); |
| if (error) { |
| log_rinfo(ls, "dlm_recover_locks error %d", error); |
| goto fail; |
| } |
| |
| dlm_set_recover_status(ls, DLM_RS_LOCKS); |
| |
| error = dlm_recover_locks_wait(ls); |
| if (error) { |
| log_rinfo(ls, "dlm_recover_locks_wait error %d", error); |
| goto fail; |
| } |
| |
| log_rinfo(ls, "dlm_recover_locks %u in", |
| ls->ls_recover_locks_in); |
| |
| /* |
| * Finalize state in master rsb's now that all locks can be |
| * checked. This includes conversion resolution and lvb |
| * settings. |
| */ |
| |
| dlm_recover_rsbs(ls); |
| } else { |
| /* |
| * Other lockspace members may be going through the "neg" steps |
| * while also adding us to the lockspace, in which case they'll |
| * be doing the recover_locks (RS_LOCKS) barrier. |
| */ |
| dlm_set_recover_status(ls, DLM_RS_LOCKS); |
| |
| error = dlm_recover_locks_wait(ls); |
| if (error) { |
| log_rinfo(ls, "dlm_recover_locks_wait error %d", error); |
| goto fail; |
| } |
| } |
| |
| dlm_release_root_list(ls); |
| |
| /* |
| * Purge directory-related requests that are saved in requestqueue. |
| * All dir requests from before recovery are invalid now due to the dir |
| * rebuild and will be resent by the requesting nodes. |
| */ |
| |
| dlm_purge_requestqueue(ls); |
| |
| dlm_set_recover_status(ls, DLM_RS_DONE); |
| |
| error = dlm_recover_done_wait(ls); |
| if (error) { |
| log_rinfo(ls, "dlm_recover_done_wait error %d", error); |
| goto fail; |
| } |
| |
| dlm_clear_members_gone(ls); |
| |
| dlm_adjust_timeouts(ls); |
| |
| dlm_callback_resume(ls); |
| |
| error = enable_locking(ls, rv->seq); |
| if (error) { |
| log_rinfo(ls, "enable_locking error %d", error); |
| goto fail; |
| } |
| |
| error = dlm_process_requestqueue(ls); |
| if (error) { |
| log_rinfo(ls, "dlm_process_requestqueue error %d", error); |
| goto fail; |
| } |
| |
| error = dlm_recover_waiters_post(ls); |
| if (error) { |
| log_rinfo(ls, "dlm_recover_waiters_post error %d", error); |
| goto fail; |
| } |
| |
| dlm_recover_grant(ls); |
| |
| log_rinfo(ls, "dlm_recover %llu generation %u done: %u ms", |
| (unsigned long long)rv->seq, ls->ls_generation, |
| jiffies_to_msecs(jiffies - start)); |
| mutex_unlock(&ls->ls_recoverd_active); |
| |
| dlm_lsop_recover_done(ls); |
| return 0; |
| |
| fail: |
| dlm_release_root_list(ls); |
| log_rinfo(ls, "dlm_recover %llu error %d", |
| (unsigned long long)rv->seq, error); |
| mutex_unlock(&ls->ls_recoverd_active); |
| return error; |
| } |
| |
| /* The dlm_ls_start() that created the rv we take here may already have been |
| stopped via dlm_ls_stop(); in that case we need to leave the RECOVERY_STOP |
| flag set. */ |
| |
| static void do_ls_recovery(struct dlm_ls *ls) |
| { |
| struct dlm_recover *rv = NULL; |
| |
| spin_lock(&ls->ls_recover_lock); |
| rv = ls->ls_recover_args; |
| ls->ls_recover_args = NULL; |
| if (rv && ls->ls_recover_seq == rv->seq) |
| clear_bit(LSFL_RECOVER_STOP, &ls->ls_flags); |
| spin_unlock(&ls->ls_recover_lock); |
| |
| if (rv) { |
| ls_recover(ls, rv); |
| kfree(rv->nodes); |
| kfree(rv); |
| } |
| } |
| |
| static int dlm_recoverd(void *arg) |
| { |
| struct dlm_ls *ls; |
| |
| ls = dlm_find_lockspace_local(arg); |
| if (!ls) { |
| log_print("dlm_recoverd: no lockspace %p", arg); |
| return -1; |
| } |
| |
| down_write(&ls->ls_in_recovery); |
| set_bit(LSFL_RECOVER_LOCK, &ls->ls_flags); |
| wake_up(&ls->ls_recover_lock_wait); |
| |
| while (1) { |
| /* |
| * We call kthread_should_stop() after set_current_state(). |
| * This is because it works correctly if kthread_stop() is |
| * called just before set_current_state(). |
| */ |
| set_current_state(TASK_INTERRUPTIBLE); |
| if (kthread_should_stop()) { |
| set_current_state(TASK_RUNNING); |
| break; |
| } |
| if (!test_bit(LSFL_RECOVER_WORK, &ls->ls_flags) && |
| !test_bit(LSFL_RECOVER_DOWN, &ls->ls_flags)) { |
| if (kthread_should_stop()) |
| break; |
| schedule(); |
| } |
| set_current_state(TASK_RUNNING); |
| |
| if (test_and_clear_bit(LSFL_RECOVER_DOWN, &ls->ls_flags)) { |
| down_write(&ls->ls_in_recovery); |
| set_bit(LSFL_RECOVER_LOCK, &ls->ls_flags); |
| wake_up(&ls->ls_recover_lock_wait); |
| } |
| |
| if (test_and_clear_bit(LSFL_RECOVER_WORK, &ls->ls_flags)) |
| do_ls_recovery(ls); |
| } |
| |
| if (test_bit(LSFL_RECOVER_LOCK, &ls->ls_flags)) |
| up_write(&ls->ls_in_recovery); |
| |
| dlm_put_lockspace(ls); |
| return 0; |
| } |
| |
| int dlm_recoverd_start(struct dlm_ls *ls) |
| { |
| struct task_struct *p; |
| int error = 0; |
| |
| p = kthread_run(dlm_recoverd, ls, "dlm_recoverd"); |
| if (IS_ERR(p)) |
| error = PTR_ERR(p); |
| else |
| ls->ls_recoverd_task = p; |
| return error; |
| } |
| |
| void dlm_recoverd_stop(struct dlm_ls *ls) |
| { |
| kthread_stop(ls->ls_recoverd_task); |
| } |
| |
| void dlm_recoverd_suspend(struct dlm_ls *ls) |
| { |
| wake_up(&ls->ls_wait_general); |
| mutex_lock(&ls->ls_recoverd_active); |
| } |
| |
| void dlm_recoverd_resume(struct dlm_ls *ls) |
| { |
| mutex_unlock(&ls->ls_recoverd_active); |
| } |
| |