| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Written 1992,1993 by Werner Almesberger |
| * 22/11/2000 - Fixed fat_date_unix2dos for dates earlier than 01/01/1980 |
| * and date_dos2unix for date==0 by Igor Zhbanov(bsg@uniyar.ac.ru) |
| * Copyright (C) 2012-2013 Samsung Electronics Co., Ltd. |
| */ |
| |
| #include <linux/time.h> |
| #include <linux/fs.h> |
| #include <linux/slab.h> |
| #include <linux/buffer_head.h> |
| #include <linux/blk_types.h> |
| |
| #include "exfat_raw.h" |
| #include "exfat_fs.h" |
| |
| /* |
| * exfat_fs_error reports a file system problem that might indicate fa data |
| * corruption/inconsistency. Depending on 'errors' mount option the |
| * panic() is called, or error message is printed FAT and nothing is done, |
| * or filesystem is remounted read-only (default behavior). |
| * In case the file system is remounted read-only, it can be made writable |
| * again by remounting it. |
| */ |
| void __exfat_fs_error(struct super_block *sb, int report, const char *fmt, ...) |
| { |
| struct exfat_mount_options *opts = &EXFAT_SB(sb)->options; |
| va_list args; |
| struct va_format vaf; |
| |
| if (report) { |
| va_start(args, fmt); |
| vaf.fmt = fmt; |
| vaf.va = &args; |
| exfat_err(sb, "error, %pV", &vaf); |
| va_end(args); |
| } |
| |
| if (opts->errors == EXFAT_ERRORS_PANIC) { |
| panic("exFAT-fs (%s): fs panic from previous error\n", |
| sb->s_id); |
| } else if (opts->errors == EXFAT_ERRORS_RO && !sb_rdonly(sb)) { |
| sb->s_flags |= SB_RDONLY; |
| exfat_err(sb, "Filesystem has been set read-only"); |
| } |
| } |
| |
| /* |
| * exfat_msg() - print preformated EXFAT specific messages. |
| * All logs except what uses exfat_fs_error() should be written by exfat_msg() |
| */ |
| void exfat_msg(struct super_block *sb, const char *level, const char *fmt, ...) |
| { |
| struct va_format vaf; |
| va_list args; |
| |
| va_start(args, fmt); |
| vaf.fmt = fmt; |
| vaf.va = &args; |
| /* level means KERN_ pacility level */ |
| printk("%sexFAT-fs (%s): %pV\n", level, sb->s_id, &vaf); |
| va_end(args); |
| } |
| |
| #define SECS_PER_MIN (60) |
| #define TIMEZONE_SEC(x) ((x) * 15 * SECS_PER_MIN) |
| |
| static void exfat_adjust_tz(struct timespec64 *ts, u8 tz_off) |
| { |
| if (tz_off <= 0x3F) |
| ts->tv_sec -= TIMEZONE_SEC(tz_off); |
| else /* 0x40 <= (tz_off & 0x7F) <=0x7F */ |
| ts->tv_sec += TIMEZONE_SEC(0x80 - tz_off); |
| } |
| |
| /* Convert a EXFAT time/date pair to a UNIX date (seconds since 1 1 70). */ |
| void exfat_get_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts, |
| u8 tz, __le16 time, __le16 date, u8 time_cs) |
| { |
| u16 t = le16_to_cpu(time); |
| u16 d = le16_to_cpu(date); |
| |
| ts->tv_sec = mktime64(1980 + (d >> 9), d >> 5 & 0x000F, d & 0x001F, |
| t >> 11, (t >> 5) & 0x003F, (t & 0x001F) << 1); |
| |
| |
| /* time_cs field represent 0 ~ 199cs(1990 ms) */ |
| if (time_cs) { |
| ts->tv_sec += time_cs / 100; |
| ts->tv_nsec = (time_cs % 100) * 10 * NSEC_PER_MSEC; |
| } else |
| ts->tv_nsec = 0; |
| |
| if (tz & EXFAT_TZ_VALID) |
| /* Adjust timezone to UTC0. */ |
| exfat_adjust_tz(ts, tz & ~EXFAT_TZ_VALID); |
| else |
| /* Convert from local time to UTC using time_offset. */ |
| ts->tv_sec -= sbi->options.time_offset * SECS_PER_MIN; |
| } |
| |
| /* Convert linear UNIX date to a EXFAT time/date pair. */ |
| void exfat_set_entry_time(struct exfat_sb_info *sbi, struct timespec64 *ts, |
| u8 *tz, __le16 *time, __le16 *date, u8 *time_cs) |
| { |
| struct tm tm; |
| u16 t, d; |
| |
| time64_to_tm(ts->tv_sec, 0, &tm); |
| t = (tm.tm_hour << 11) | (tm.tm_min << 5) | (tm.tm_sec >> 1); |
| d = ((tm.tm_year - 80) << 9) | ((tm.tm_mon + 1) << 5) | tm.tm_mday; |
| |
| *time = cpu_to_le16(t); |
| *date = cpu_to_le16(d); |
| |
| /* time_cs field represent 0 ~ 199cs(1990 ms) */ |
| if (time_cs) |
| *time_cs = (tm.tm_sec & 1) * 100 + |
| ts->tv_nsec / (10 * NSEC_PER_MSEC); |
| |
| /* |
| * Record 00h value for OffsetFromUtc field and 1 value for OffsetValid |
| * to indicate that local time and UTC are the same. |
| */ |
| *tz = EXFAT_TZ_VALID; |
| } |
| |
| /* |
| * The timestamp for access_time has double seconds granularity. |
| * (There is no 10msIncrement field for access_time unlike create/modify_time) |
| * atime also has only a 2-second resolution. |
| */ |
| void exfat_truncate_atime(struct timespec64 *ts) |
| { |
| ts->tv_sec = round_down(ts->tv_sec, 2); |
| ts->tv_nsec = 0; |
| } |
| |
| u16 exfat_calc_chksum16(void *data, int len, u16 chksum, int type) |
| { |
| int i; |
| u8 *c = (u8 *)data; |
| |
| for (i = 0; i < len; i++, c++) { |
| if (unlikely(type == CS_DIR_ENTRY && (i == 2 || i == 3))) |
| continue; |
| chksum = ((chksum << 15) | (chksum >> 1)) + *c; |
| } |
| return chksum; |
| } |
| |
| u32 exfat_calc_chksum32(void *data, int len, u32 chksum, int type) |
| { |
| int i; |
| u8 *c = (u8 *)data; |
| |
| for (i = 0; i < len; i++, c++) { |
| if (unlikely(type == CS_BOOT_SECTOR && |
| (i == 106 || i == 107 || i == 112))) |
| continue; |
| chksum = ((chksum << 31) | (chksum >> 1)) + *c; |
| } |
| return chksum; |
| } |
| |
| void exfat_update_bh(struct buffer_head *bh, int sync) |
| { |
| set_buffer_uptodate(bh); |
| mark_buffer_dirty(bh); |
| |
| if (sync) |
| sync_dirty_buffer(bh); |
| } |
| |
| int exfat_update_bhs(struct buffer_head **bhs, int nr_bhs, int sync) |
| { |
| int i, err = 0; |
| |
| for (i = 0; i < nr_bhs; i++) { |
| set_buffer_uptodate(bhs[i]); |
| mark_buffer_dirty(bhs[i]); |
| if (sync) |
| write_dirty_buffer(bhs[i], REQ_SYNC); |
| } |
| |
| for (i = 0; i < nr_bhs && sync; i++) { |
| wait_on_buffer(bhs[i]); |
| if (!err && !buffer_uptodate(bhs[i])) |
| err = -EIO; |
| } |
| return err; |
| } |
| |
| void exfat_chain_set(struct exfat_chain *ec, unsigned int dir, |
| unsigned int size, unsigned char flags) |
| { |
| ec->dir = dir; |
| ec->size = size; |
| ec->flags = flags; |
| } |
| |
| void exfat_chain_dup(struct exfat_chain *dup, struct exfat_chain *ec) |
| { |
| return exfat_chain_set(dup, ec->dir, ec->size, ec->flags); |
| } |