| /* |
| * Copyright (C) 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| #include <linux/mm.h> |
| #include <linux/delay.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/clkdev.h> |
| #include <linux/of.h> |
| #include <linux/err.h> |
| |
| #include "crmregs-imx3.h" |
| #include "clk.h" |
| #include "common.h" |
| #include "hardware.h" |
| |
| struct arm_ahb_div { |
| unsigned char arm, ahb, sel; |
| }; |
| |
| static struct arm_ahb_div clk_consumer[] = { |
| { .arm = 1, .ahb = 4, .sel = 0}, |
| { .arm = 1, .ahb = 3, .sel = 1}, |
| { .arm = 2, .ahb = 2, .sel = 0}, |
| { .arm = 0, .ahb = 0, .sel = 0}, |
| { .arm = 0, .ahb = 0, .sel = 0}, |
| { .arm = 0, .ahb = 0, .sel = 0}, |
| { .arm = 4, .ahb = 1, .sel = 0}, |
| { .arm = 1, .ahb = 5, .sel = 0}, |
| { .arm = 1, .ahb = 8, .sel = 0}, |
| { .arm = 1, .ahb = 6, .sel = 1}, |
| { .arm = 2, .ahb = 4, .sel = 0}, |
| { .arm = 0, .ahb = 0, .sel = 0}, |
| { .arm = 0, .ahb = 0, .sel = 0}, |
| { .arm = 0, .ahb = 0, .sel = 0}, |
| { .arm = 4, .ahb = 2, .sel = 0}, |
| { .arm = 0, .ahb = 0, .sel = 0}, |
| }; |
| |
| static char hsp_div_532[] = { 4, 8, 3, 0 }; |
| static char hsp_div_400[] = { 3, 6, 3, 0 }; |
| |
| static const char *std_sel[] = {"ppll", "arm"}; |
| static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"}; |
| |
| enum mx35_clks { |
| ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg, |
| arm_per_div, ahb_per_div, ipg_per, uart_sel, uart_div, esdhc_sel, |
| esdhc1_div, esdhc2_div, esdhc3_div, spdif_sel, spdif_div_pre, |
| spdif_div_post, ssi_sel, ssi1_div_pre, ssi1_div_post, ssi2_div_pre, |
| ssi2_div_post, usb_sel, usb_div, nfc_div, asrc_gate, pata_gate, |
| audmux_gate, can1_gate, can2_gate, cspi1_gate, cspi2_gate, ect_gate, |
| edio_gate, emi_gate, epit1_gate, epit2_gate, esai_gate, esdhc1_gate, |
| esdhc2_gate, esdhc3_gate, fec_gate, gpio1_gate, gpio2_gate, gpio3_gate, |
| gpt_gate, i2c1_gate, i2c2_gate, i2c3_gate, iomuxc_gate, ipu_gate, |
| kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate, |
| rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate, |
| ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate, |
| wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate, |
| gpu2d_gate, clk_max |
| }; |
| |
| static struct clk *clk[clk_max]; |
| |
| int __init mx35_clocks_init(void) |
| { |
| void __iomem *base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR); |
| u32 pdr0, consumer_sel, hsp_sel; |
| struct arm_ahb_div *aad; |
| unsigned char *hsp_div; |
| u32 i; |
| |
| pdr0 = __raw_readl(base + MXC_CCM_PDR0); |
| consumer_sel = (pdr0 >> 16) & 0xf; |
| aad = &clk_consumer[consumer_sel]; |
| if (!aad->arm) { |
| pr_err("i.MX35 clk: illegal consumer mux selection 0x%x\n", consumer_sel); |
| /* |
| * We are basically stuck. Continue with a default entry and hope we |
| * get far enough to actually show the above message |
| */ |
| aad = &clk_consumer[0]; |
| } |
| |
| clk[ckih] = imx_clk_fixed("ckih", 24000000); |
| clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MX35_CCM_MPCTL); |
| clk[ppll] = imx_clk_pllv1("ppll", "ckih", base + MX35_CCM_PPCTL); |
| |
| clk[mpll] = imx_clk_fixed_factor("mpll_075", "mpll", 3, 4); |
| |
| if (aad->sel) |
| clk[arm] = imx_clk_fixed_factor("arm", "mpll_075", 1, aad->arm); |
| else |
| clk[arm] = imx_clk_fixed_factor("arm", "mpll", 1, aad->arm); |
| |
| if (clk_get_rate(clk[arm]) > 400000000) |
| hsp_div = hsp_div_532; |
| else |
| hsp_div = hsp_div_400; |
| |
| hsp_sel = (pdr0 >> 20) & 0x3; |
| if (!hsp_div[hsp_sel]) { |
| pr_err("i.MX35 clk: illegal hsp clk selection 0x%x\n", hsp_sel); |
| hsp_sel = 0; |
| } |
| |
| clk[hsp] = imx_clk_fixed_factor("hsp", "arm", 1, hsp_div[hsp_sel]); |
| |
| clk[ahb] = imx_clk_fixed_factor("ahb", "arm", 1, aad->ahb); |
| clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2); |
| |
| clk[arm_per_div] = imx_clk_divider("arm_per_div", "arm", base + MX35_CCM_PDR4, 16, 6); |
| clk[ahb_per_div] = imx_clk_divider("ahb_per_div", "ahb", base + MXC_CCM_PDR0, 12, 3); |
| clk[ipg_per] = imx_clk_mux("ipg_per", base + MXC_CCM_PDR0, 26, 1, ipg_per_sel, ARRAY_SIZE(ipg_per_sel)); |
| |
| clk[uart_sel] = imx_clk_mux("uart_sel", base + MX35_CCM_PDR3, 14, 1, std_sel, ARRAY_SIZE(std_sel)); |
| clk[uart_div] = imx_clk_divider("uart_div", "uart_sel", base + MX35_CCM_PDR4, 10, 6); |
| |
| clk[esdhc_sel] = imx_clk_mux("esdhc_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel)); |
| clk[esdhc1_div] = imx_clk_divider("esdhc1_div", "esdhc_sel", base + MX35_CCM_PDR3, 0, 6); |
| clk[esdhc2_div] = imx_clk_divider("esdhc2_div", "esdhc_sel", base + MX35_CCM_PDR3, 8, 6); |
| clk[esdhc3_div] = imx_clk_divider("esdhc3_div", "esdhc_sel", base + MX35_CCM_PDR3, 16, 6); |
| |
| clk[spdif_sel] = imx_clk_mux("spdif_sel", base + MX35_CCM_PDR3, 22, 1, std_sel, ARRAY_SIZE(std_sel)); |
| clk[spdif_div_pre] = imx_clk_divider("spdif_div_pre", "spdif_sel", base + MX35_CCM_PDR3, 29, 3); /* divide by 1 not allowed */ |
| clk[spdif_div_post] = imx_clk_divider("spdif_div_post", "spdif_div_pre", base + MX35_CCM_PDR3, 23, 6); |
| |
| clk[ssi_sel] = imx_clk_mux("ssi_sel", base + MX35_CCM_PDR2, 6, 1, std_sel, ARRAY_SIZE(std_sel)); |
| clk[ssi1_div_pre] = imx_clk_divider("ssi1_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 24, 3); |
| clk[ssi1_div_post] = imx_clk_divider("ssi1_div_post", "ssi1_div_pre", base + MX35_CCM_PDR2, 0, 6); |
| clk[ssi2_div_pre] = imx_clk_divider("ssi2_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 27, 3); |
| clk[ssi2_div_post] = imx_clk_divider("ssi2_div_post", "ssi2_div_pre", base + MX35_CCM_PDR2, 8, 6); |
| |
| clk[usb_sel] = imx_clk_mux("usb_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel)); |
| clk[usb_div] = imx_clk_divider("usb_div", "usb_sel", base + MX35_CCM_PDR4, 22, 6); |
| |
| clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4); |
| |
| clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel)); |
| clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6); |
| |
| clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0, 0); |
| clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0, 2); |
| clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0, 4); |
| clk[can1_gate] = imx_clk_gate2("can1_gate", "ipg", base + MX35_CCM_CGR0, 6); |
| clk[can2_gate] = imx_clk_gate2("can2_gate", "ipg", base + MX35_CCM_CGR0, 8); |
| clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MX35_CCM_CGR0, 10); |
| clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MX35_CCM_CGR0, 12); |
| clk[ect_gate] = imx_clk_gate2("ect_gate", "ipg", base + MX35_CCM_CGR0, 14); |
| clk[edio_gate] = imx_clk_gate2("edio_gate", "ipg", base + MX35_CCM_CGR0, 16); |
| clk[emi_gate] = imx_clk_gate2("emi_gate", "ipg", base + MX35_CCM_CGR0, 18); |
| clk[epit1_gate] = imx_clk_gate2("epit1_gate", "ipg", base + MX35_CCM_CGR0, 20); |
| clk[epit2_gate] = imx_clk_gate2("epit2_gate", "ipg", base + MX35_CCM_CGR0, 22); |
| clk[esai_gate] = imx_clk_gate2("esai_gate", "ipg", base + MX35_CCM_CGR0, 24); |
| clk[esdhc1_gate] = imx_clk_gate2("esdhc1_gate", "esdhc1_div", base + MX35_CCM_CGR0, 26); |
| clk[esdhc2_gate] = imx_clk_gate2("esdhc2_gate", "esdhc2_div", base + MX35_CCM_CGR0, 28); |
| clk[esdhc3_gate] = imx_clk_gate2("esdhc3_gate", "esdhc3_div", base + MX35_CCM_CGR0, 30); |
| |
| clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", base + MX35_CCM_CGR1, 0); |
| clk[gpio1_gate] = imx_clk_gate2("gpio1_gate", "ipg", base + MX35_CCM_CGR1, 2); |
| clk[gpio2_gate] = imx_clk_gate2("gpio2_gate", "ipg", base + MX35_CCM_CGR1, 4); |
| clk[gpio3_gate] = imx_clk_gate2("gpio3_gate", "ipg", base + MX35_CCM_CGR1, 6); |
| clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", base + MX35_CCM_CGR1, 8); |
| clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "ipg_per", base + MX35_CCM_CGR1, 10); |
| clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "ipg_per", base + MX35_CCM_CGR1, 12); |
| clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "ipg_per", base + MX35_CCM_CGR1, 14); |
| clk[iomuxc_gate] = imx_clk_gate2("iomuxc_gate", "ipg", base + MX35_CCM_CGR1, 16); |
| clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MX35_CCM_CGR1, 18); |
| clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MX35_CCM_CGR1, 20); |
| clk[mlb_gate] = imx_clk_gate2("mlb_gate", "ahb", base + MX35_CCM_CGR1, 22); |
| clk[mshc_gate] = imx_clk_gate2("mshc_gate", "dummy", base + MX35_CCM_CGR1, 24); |
| clk[owire_gate] = imx_clk_gate2("owire_gate", "ipg_per", base + MX35_CCM_CGR1, 26); |
| clk[pwm_gate] = imx_clk_gate2("pwm_gate", "ipg_per", base + MX35_CCM_CGR1, 28); |
| clk[rngc_gate] = imx_clk_gate2("rngc_gate", "ipg", base + MX35_CCM_CGR1, 30); |
| |
| clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MX35_CCM_CGR2, 0); |
| clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MX35_CCM_CGR2, 2); |
| clk[scc_gate] = imx_clk_gate2("scc_gate", "ipg", base + MX35_CCM_CGR2, 4); |
| clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MX35_CCM_CGR2, 6); |
| clk[spba_gate] = imx_clk_gate2("spba_gate", "ipg", base + MX35_CCM_CGR2, 8); |
| clk[spdif_gate] = imx_clk_gate2("spdif_gate", "spdif_div_post", base + MX35_CCM_CGR2, 10); |
| clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "ssi1_div_post", base + MX35_CCM_CGR2, 12); |
| clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "ssi2_div_post", base + MX35_CCM_CGR2, 14); |
| clk[uart1_gate] = imx_clk_gate2("uart1_gate", "uart_div", base + MX35_CCM_CGR2, 16); |
| clk[uart2_gate] = imx_clk_gate2("uart2_gate", "uart_div", base + MX35_CCM_CGR2, 18); |
| clk[uart3_gate] = imx_clk_gate2("uart3_gate", "uart_div", base + MX35_CCM_CGR2, 20); |
| clk[usbotg_gate] = imx_clk_gate2("usbotg_gate", "ahb", base + MX35_CCM_CGR2, 22); |
| clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MX35_CCM_CGR2, 24); |
| clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26); |
| clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30); |
| |
| clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MX35_CCM_CGR3, 0); |
| clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2); |
| clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4); |
| |
| for (i = 0; i < ARRAY_SIZE(clk); i++) |
| if (IS_ERR(clk[i])) |
| pr_err("i.MX35 clk %d: register failed with %ld\n", |
| i, PTR_ERR(clk[i])); |
| |
| clk_register_clkdev(clk[pata_gate], NULL, "pata_imx"); |
| clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0"); |
| clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1"); |
| clk_register_clkdev(clk[cspi1_gate], "per", "imx35-cspi.0"); |
| clk_register_clkdev(clk[cspi1_gate], "ipg", "imx35-cspi.0"); |
| clk_register_clkdev(clk[cspi2_gate], "per", "imx35-cspi.1"); |
| clk_register_clkdev(clk[cspi2_gate], "ipg", "imx35-cspi.1"); |
| clk_register_clkdev(clk[epit1_gate], NULL, "imx-epit.0"); |
| clk_register_clkdev(clk[epit2_gate], NULL, "imx-epit.1"); |
| clk_register_clkdev(clk[esdhc1_gate], "per", "sdhci-esdhc-imx35.0"); |
| clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.0"); |
| clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.0"); |
| clk_register_clkdev(clk[esdhc2_gate], "per", "sdhci-esdhc-imx35.1"); |
| clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.1"); |
| clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.1"); |
| clk_register_clkdev(clk[esdhc3_gate], "per", "sdhci-esdhc-imx35.2"); |
| clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.2"); |
| clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.2"); |
| /* i.mx35 has the i.mx27 type fec */ |
| clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); |
| clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0"); |
| clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); |
| clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0"); |
| clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1"); |
| clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); |
| clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); |
| clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); |
| clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); |
| clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1"); |
| clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); |
| clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); |
| clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); |
| /* i.mx35 has the i.mx21 type uart */ |
| clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); |
| clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); |
| clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1"); |
| clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1"); |
| clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2"); |
| clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2"); |
| clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0"); |
| clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); |
| clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0"); |
| clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1"); |
| clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1"); |
| clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.1"); |
| clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); |
| clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); |
| clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2"); |
| clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); |
| clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); |
| clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27"); |
| clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); |
| clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); |
| clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); |
| clk_register_clkdev(clk[admux_gate], "audmux", NULL); |
| |
| clk_prepare_enable(clk[spba_gate]); |
| clk_prepare_enable(clk[gpio1_gate]); |
| clk_prepare_enable(clk[gpio2_gate]); |
| clk_prepare_enable(clk[gpio3_gate]); |
| clk_prepare_enable(clk[iim_gate]); |
| clk_prepare_enable(clk[emi_gate]); |
| clk_prepare_enable(clk[max_gate]); |
| clk_prepare_enable(clk[iomuxc_gate]); |
| |
| /* |
| * SCC is needed to boot via mmc after a watchdog reset. The clock code |
| * before conversion to common clk also enabled UART1 (which isn't |
| * handled here and not needed for mmc) and IIM (which is enabled |
| * unconditionally above). |
| */ |
| clk_prepare_enable(clk[scc_gate]); |
| |
| imx_print_silicon_rev("i.MX35", mx35_revision()); |
| |
| #ifdef CONFIG_MXC_USE_EPIT |
| epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); |
| #else |
| mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); |
| #endif |
| |
| return 0; |
| } |