| # |
| # PINCTRL infrastructure and drivers |
| # |
| |
| config PINCTRL |
| bool |
| |
| if PINCTRL |
| |
| menu "Pin controllers" |
| depends on PINCTRL |
| |
| config PINMUX |
| bool "Support pin multiplexing controllers" |
| |
| config PINCONF |
| bool "Support pin configuration controllers" |
| |
| config GENERIC_PINCONF |
| bool |
| select PINCONF |
| |
| config DEBUG_PINCTRL |
| bool "Debug PINCTRL calls" |
| depends on DEBUG_KERNEL |
| help |
| Say Y here to add some extra checks and diagnostics to PINCTRL calls. |
| |
| config PINCTRL_ABX500 |
| bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions" |
| depends on AB8500_CORE |
| select GENERIC_PINCONF |
| help |
| Select this to enable the ABx500 family IC GPIO driver |
| |
| config PINCTRL_AB8500 |
| bool "AB8500 pin controller driver" |
| depends on PINCTRL_ABX500 && ARCH_U8500 |
| |
| config PINCTRL_AB8540 |
| bool "AB8540 pin controller driver" |
| depends on PINCTRL_ABX500 && ARCH_U8500 |
| |
| config PINCTRL_AB9540 |
| bool "AB9540 pin controller driver" |
| depends on PINCTRL_ABX500 && ARCH_U8500 |
| |
| config PINCTRL_AB8505 |
| bool "AB8505 pin controller driver" |
| depends on PINCTRL_ABX500 && ARCH_U8500 |
| |
| config PINCTRL_ADI2 |
| bool "ADI pin controller driver" |
| depends on BLACKFIN |
| select PINMUX |
| select IRQ_DOMAIN |
| help |
| This is the pin controller and gpio driver for ADI BF54x, BF60x and |
| future processors. This option is selected automatically when specific |
| machine and arch are selected to build. |
| |
| config PINCTRL_AS3722 |
| bool "Pinctrl and GPIO driver for ams AS3722 PMIC" |
| depends on MFD_AS3722 && GPIOLIB |
| select PINMUX |
| select GENERIC_PINCONF |
| help |
| AS3722 device supports the configuration of GPIO pins for different |
| functionality. This driver supports the pinmux, push-pull and |
| open drain configuration for the GPIO pins of AS3722 devices. It also |
| supports the GPIO functionality through gpiolib. |
| |
| config PINCTRL_BF54x |
| def_bool y if BF54x |
| select PINCTRL_ADI2 |
| |
| config PINCTRL_BF60x |
| def_bool y if BF60x |
| select PINCTRL_ADI2 |
| |
| config PINCTRL_AT91 |
| bool "AT91 pinctrl driver" |
| depends on OF |
| depends on ARCH_AT91 |
| select PINMUX |
| select PINCONF |
| help |
| Say Y here to enable the at91 pinctrl driver |
| |
| config PINCTRL_BAYTRAIL |
| bool "Intel Baytrail GPIO pin control" |
| depends on GPIOLIB && ACPI && X86 |
| select IRQ_DOMAIN |
| help |
| driver for memory mapped GPIO functionality on Intel Baytrail |
| platforms. Supports 3 banks with 102, 28 and 44 gpios. |
| Most pins are usually muxed to some other functionality by firmware, |
| so only a small amount is available for gpio use. |
| |
| Requires ACPI device enumeration code to set up a platform device. |
| |
| config PINCTRL_BCM2835 |
| bool |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_IMX |
| bool |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_IMX1_CORE |
| bool |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_IMX27 |
| bool "IMX27 pinctrl driver" |
| depends on OF |
| depends on SOC_IMX27 |
| select PINCTRL_IMX1_CORE |
| help |
| Say Y here to enable the imx27 pinctrl driver |
| |
| config PINCTRL_IMX35 |
| bool "IMX35 pinctrl driver" |
| depends on OF |
| depends on SOC_IMX35 |
| select PINCTRL_IMX |
| help |
| Say Y here to enable the imx35 pinctrl driver |
| |
| config PINCTRL_IMX50 |
| bool "IMX50 pinctrl driver" |
| depends on OF |
| depends on SOC_IMX50 |
| select PINCTRL_IMX |
| help |
| Say Y here to enable the imx50 pinctrl driver |
| |
| config PINCTRL_IMX51 |
| bool "IMX51 pinctrl driver" |
| depends on OF |
| depends on SOC_IMX51 |
| select PINCTRL_IMX |
| help |
| Say Y here to enable the imx51 pinctrl driver |
| |
| config PINCTRL_IMX53 |
| bool "IMX53 pinctrl driver" |
| depends on OF |
| depends on SOC_IMX53 |
| select PINCTRL_IMX |
| help |
| Say Y here to enable the imx53 pinctrl driver |
| |
| config PINCTRL_IMX6Q |
| bool "IMX6Q/DL pinctrl driver" |
| depends on OF |
| depends on SOC_IMX6Q |
| select PINCTRL_IMX |
| help |
| Say Y here to enable the imx6q/dl pinctrl driver |
| |
| config PINCTRL_IMX6SL |
| bool "IMX6SL pinctrl driver" |
| depends on OF |
| depends on SOC_IMX6SL |
| select PINCTRL_IMX |
| help |
| Say Y here to enable the imx6sl pinctrl driver |
| |
| config PINCTRL_VF610 |
| bool "Freescale Vybrid VF610 pinctrl driver" |
| depends on OF |
| depends on SOC_VF610 |
| select PINCTRL_IMX |
| help |
| Say Y here to enable the Freescale Vybrid VF610 pinctrl driver |
| |
| config PINCTRL_LANTIQ |
| bool |
| depends on LANTIQ |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_FALCON |
| bool |
| depends on SOC_FALCON |
| depends on PINCTRL_LANTIQ |
| |
| config PINCTRL_MXS |
| bool |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_IMX23 |
| bool |
| select PINCTRL_MXS |
| |
| config PINCTRL_IMX28 |
| bool |
| select PINCTRL_MXS |
| |
| config PINCTRL_NOMADIK |
| bool "Nomadik pin controller driver" |
| depends on ARCH_U8500 || ARCH_NOMADIK |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_STN8815 |
| bool "STN8815 pin controller driver" |
| depends on PINCTRL_NOMADIK && ARCH_NOMADIK |
| |
| config PINCTRL_DB8500 |
| bool "DB8500 pin controller driver" |
| depends on PINCTRL_NOMADIK && ARCH_U8500 |
| |
| config PINCTRL_DB8540 |
| bool "DB8540 pin controller driver" |
| depends on PINCTRL_NOMADIK && ARCH_U8500 |
| |
| config PINCTRL_ROCKCHIP |
| bool |
| select PINMUX |
| select GENERIC_PINCONF |
| select GENERIC_IRQ_CHIP |
| |
| config PINCTRL_SINGLE |
| tristate "One-register-per-pin type device tree based pinctrl driver" |
| depends on OF |
| select PINMUX |
| select PINCONF |
| select GENERIC_PINCONF |
| help |
| This selects the device tree based generic pinctrl driver. |
| |
| config PINCTRL_SIRF |
| bool "CSR SiRFprimaII/SiRFmarco pin controller driver" |
| depends on ARCH_SIRF |
| select PINMUX |
| |
| config PINCTRL_SUNXI |
| bool |
| select PINMUX |
| select GENERIC_PINCONF |
| |
| config PINCTRL_ST |
| bool |
| depends on OF |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_TEGRA |
| bool |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_TEGRA20 |
| bool |
| select PINCTRL_TEGRA |
| |
| config PINCTRL_TEGRA30 |
| bool |
| select PINCTRL_TEGRA |
| |
| config PINCTRL_TEGRA114 |
| bool |
| select PINCTRL_TEGRA |
| |
| config PINCTRL_TZ1090 |
| bool "Toumaz Xenif TZ1090 pin control driver" |
| depends on SOC_TZ1090 |
| select PINMUX |
| select GENERIC_PINCONF |
| |
| config PINCTRL_TZ1090_PDC |
| bool "Toumaz Xenif TZ1090 PDC pin control driver" |
| depends on SOC_TZ1090 |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_U300 |
| bool "U300 pin controller driver" |
| depends on ARCH_U300 |
| select PINMUX |
| select GENERIC_PINCONF |
| |
| config PINCTRL_COH901 |
| bool "ST-Ericsson U300 COH 901 335/571 GPIO" |
| depends on GPIOLIB && ARCH_U300 && PINCTRL_U300 |
| help |
| Say yes here to support GPIO interface on ST-Ericsson U300. |
| The names of the two IP block variants supported are |
| COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 |
| ports of 8 GPIO pins each. |
| |
| config PINCTRL_SAMSUNG |
| bool |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_EXYNOS |
| bool "Pinctrl driver data for Samsung EXYNOS SoCs other than 5440" |
| depends on OF && GPIOLIB && (ARCH_EXYNOS || ARCH_S5PV210) |
| select PINCTRL_SAMSUNG |
| |
| config PINCTRL_EXYNOS5440 |
| bool "Samsung EXYNOS5440 SoC pinctrl driver" |
| depends on SOC_EXYNOS5440 |
| select PINMUX |
| select PINCONF |
| |
| config PINCTRL_PALMAS |
| bool "Pinctrl driver for the PALMAS Series MFD devices" |
| depends on OF && MFD_PALMAS |
| select PINMUX |
| select GENERIC_PINCONF |
| help |
| Palmas device supports the configuration of pins for different |
| functionality. This driver supports the pinmux, push-pull and |
| open drain configuration for the Palmas series devices like |
| TPS65913, TPS80036 etc. |
| |
| config PINCTRL_S3C24XX |
| bool "Samsung S3C24XX SoC pinctrl driver" |
| depends on ARCH_S3C24XX |
| select PINCTRL_SAMSUNG |
| |
| config PINCTRL_S3C64XX |
| bool "Samsung S3C64XX SoC pinctrl driver" |
| depends on ARCH_S3C64XX |
| select PINCTRL_SAMSUNG |
| |
| source "drivers/pinctrl/mvebu/Kconfig" |
| source "drivers/pinctrl/sh-pfc/Kconfig" |
| source "drivers/pinctrl/spear/Kconfig" |
| source "drivers/pinctrl/vt8500/Kconfig" |
| |
| config PINCTRL_XWAY |
| bool |
| depends on SOC_TYPE_XWAY |
| depends on PINCTRL_LANTIQ |
| |
| config PINCTRL_TB10X |
| bool |
| depends on ARC_PLAT_TB10X |
| |
| endmenu |
| |
| endif |
