blob: 188fff2095f11a88672825c7c2696a4e706c798c [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8994.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
cpus {
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
next-level-cache = <&L2_0>;
enable-method = "psci";
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
next-level-cache = <&L2_0>;
enable-method = "psci";
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
next-level-cache = <&L2_0>;
enable-method = "psci";
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
next-level-cache = <&L2_0>;
enable-method = "psci";
};
CPU4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x100>;
next-level-cache = <&L2_1>;
enable-method = "psci";
L2_1: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
CPU5: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0 0x101>;
next-level-cache = <&L2_1>;
enable-method = "psci";
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
};
cluster1 {
core0 {
cpu = <&CPU4>;
};
core1 {
cpu = <&CPU5>;
};
};
};
};
clocks {
xo_board: xo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
firmware {
scm {
compatible = "qcom,scm-msm8994", "qcom,scm";
};
};
memory {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
reg = <0 0 0 0>;
};
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
};
psci {
compatible = "arm,psci-0.2";
method = "hvc";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
smem_region: smem@6a00000 {
reg = <0x0 0x6a00000 0x0 0x200000>;
no-map;
};
};
sfpb_mutex: hwmutex {
compatible = "qcom,sfpb-mutex";
syscon = <&sfpb_mutex_regs 0x0 0x100>;
#hwlock-cells = <1>;
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
hwlocks = <&sfpb_mutex 3>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
intc: interrupt-controller@f9000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0xf9000000 0x1000>,
<0xf9002000 0x1000>;
};
apcs: mailbox@f900d000 {
compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
reg = <0xf900d000 0x2000>;
#mbox-cells = <1>;
};
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0xf9020000 0x1000>;
frame@f9021000 {
frame-number = <0>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
};
sdhc_1: sdhci@f9824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
&sdc1_rclk_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
&sdc1_rclk_off>;
regulator-always-on;
bus-width = <8>;
non-removable;
status = "disabled";
};
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_uart2_default>;
pinctrl-1 = <&blsp1_uart2_sleep>;
status = "disabled";
};
blsp_i2c2: i2c@f9924000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9924000 0x500>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <400000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c2_default>;
pinctrl-1 = <&i2c2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
/* Somebody was very creative with their numbering scheme downstream... */
blsp_i2c13: i2c@f9927000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9927000 0x500>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <400000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c13_default>;
pinctrl-1 = <&i2c13_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c6: i2c@f9928000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9928000 0x500>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <400000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c6_default>;
pinctrl-1 = <&i2c6_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp2_uart2: serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
interrupt = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_uart2_default>;
pinctrl-1 = <&blsp2_uart2_sleep>;
status = "disabled";
};
blsp_i2c7: i2c@f9963000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9963000 0x500>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_AHB_CLK>,
<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <400000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c7_default>;
pinctrl-1 = <&i2c7_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c5: i2c@f9967000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9967000 0x500>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_AHB_CLK>,
<&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
clock-names = "iface", "core";
clock-frequency = <100000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c5_default>;
pinctrl-1 = <&i2c5_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8994";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0xfc400000 0x2000>;
};
rpm_msg_ram: memory@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
};
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
};
spmi_bus: spmi@fc4c0000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xfc4cf000 0x1000>,
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
reg-names = "core", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
sfpb_mutex_regs: syscon@fd484000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "syscon";
reg = <0xfd484000 0x400>;
};
tlmm: pinctrl@fd510000 {
compatible = "qcom,msm8994-pinctrl";
reg = <0xfd510000 0x4000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 146>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
blsp1_uart2_default: blsp1-uart2-default {
function = "blsp_uart2";
pins = "gpio4", "gpio5";
drive-strength = <16>;
bias-disable;
};
blsp1_uart2_sleep: blsp1-uart2-sleep {
function = "gpio";
pins = "gpio4", "gpio5";
drive-strength = <2>;
bias-pull-down;
};
blsp2_uart2_default: blsp2-uart2-default {
function = "blsp_uart8";
pins = "gpio45", "gpio46", "gpio47", "gpio48";
drive-strength = <16>;
bias-disable;
};
blsp2_uart2_sleep: blsp2-uart2-sleep {
function = "gpio";
pins = "gpio45", "gpio46", "gpio47", "gpio48";
drive-strength = <2>;
bias-pull-down;
};
sdc1_clk_on: clk-on {
pins = "sdc1_clk";
bias-disable;
drive-strength = <6>;
};
sdc1_clk_off: clk-off {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
sdc1_cmd_on: cmd-on {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <6>;
};
sdc1_cmd_off: cmd-off {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <2>;
};
sdc1_data_on: data-on {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <6>;
};
sdc1_data_off: data-off {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
sdc1_rclk_on: rclk-on {
pins = "sdc1_rclk";
bias-pull-down;
};
sdc1_rclk_off: rclk-off {
pins = "sdc1_rclk";
bias-pull-down;
};
i2c2_default: i2c2-default {
function = "blsp_i2c2";
pins = "gpio6", "gpio7";
drive-strength = <2>;
bias-disable;
};
i2c2_sleep: i2c2-sleep {
function = "gpio";
pins = "gpio6", "gpio7";
drive-strength = <2>;
bias-disable;
};
i2c5_default: i2c5-default {
/* Don't be fooled! Nobody knows the reason why though... */
function = "blsp_i2c11";
pins = "gpio83", "gpio84";
drive-strength = <2>;
bias-disable;
};
i2c5_sleep: i2c5-sleep {
function = "gpio";
pins = "gpio83", "gpio84";
drive-strength = <2>;
bias-disable;
};
i2c6_default: i2c6-default {
function = "blsp_i2c6";
pins = "gpio28", "gpio27";
drive-strength = <2>;
bias-disable;
};
i2c6_sleep: i2c6-sleep {
function = "gpio";
pins = "gpio28", "gpio27";
drive-strength = <2>;
bias-disable;
};
i2c7_default: i2c7-default {
function = "blsp_i2c7";
pins = "gpio43", "gpio44";
drive-strength = <2>;
bias-disable;
};
i2c7_sleep: i2c7-sleep {
function = "gpio";
pins = "gpio43", "gpio44";
drive-strength = <2>;
bias-disable;
};
i2c13_default: i2c13-default {
/* Not a typo either. */
function = "blsp_i2c5";
pins = "gpio23", "gpio24";
drive-strength = <2>;
bias-disable;
};
i2c13_sleep: i2c13-sleep {
function = "gpio";
pins = "gpio23", "gpio24";
drive-strength = <2>;
bias-disable;
};
};
};
smd_rpm: smd {
compatible = "qcom,smd";
rpm {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
qcom,local-pid = <0>;
qcom,remote-pid = <6>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8994";
qcom,smd-channels = "rpm_requests";
rpmcc: rpmcc {
compatible = "qcom,rpmcc-msm8992";
#clock-cells = <1>;
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
vreg_vph_pwr: vreg-vph-pwr {
compatible = "regulator-fixed";
status = "okay";
regulator-name = "vph-pwr";
regulator-min-microvolt = <3600000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
};