| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2018 Socionext Inc. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/console.h> |
| #include <linux/module.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| #include <linux/serial_core.h> |
| #include <linux/tty.h> |
| #include <linux/tty_flip.h> |
| |
| #define USIO_NAME "mlb-usio-uart" |
| #define USIO_UART_DEV_NAME "ttyUSI" |
| |
| static struct uart_port mlb_usio_ports[CONFIG_SERIAL_MILBEAUT_USIO_PORTS]; |
| |
| #define RX 0 |
| #define TX 1 |
| static int mlb_usio_irq[CONFIG_SERIAL_MILBEAUT_USIO_PORTS][2]; |
| |
| #define MLB_USIO_REG_SMR 0 |
| #define MLB_USIO_REG_SCR 1 |
| #define MLB_USIO_REG_ESCR 2 |
| #define MLB_USIO_REG_SSR 3 |
| #define MLB_USIO_REG_DR 4 |
| #define MLB_USIO_REG_BGR 6 |
| #define MLB_USIO_REG_FCR 12 |
| #define MLB_USIO_REG_FBYTE 14 |
| |
| #define MLB_USIO_SMR_SOE BIT(0) |
| #define MLB_USIO_SMR_SBL BIT(3) |
| #define MLB_USIO_SCR_TXE BIT(0) |
| #define MLB_USIO_SCR_RXE BIT(1) |
| #define MLB_USIO_SCR_TBIE BIT(2) |
| #define MLB_USIO_SCR_TIE BIT(3) |
| #define MLB_USIO_SCR_RIE BIT(4) |
| #define MLB_USIO_SCR_UPCL BIT(7) |
| #define MLB_USIO_ESCR_L_8BIT 0 |
| #define MLB_USIO_ESCR_L_5BIT 1 |
| #define MLB_USIO_ESCR_L_6BIT 2 |
| #define MLB_USIO_ESCR_L_7BIT 3 |
| #define MLB_USIO_ESCR_P BIT(3) |
| #define MLB_USIO_ESCR_PEN BIT(4) |
| #define MLB_USIO_ESCR_FLWEN BIT(7) |
| #define MLB_USIO_SSR_TBI BIT(0) |
| #define MLB_USIO_SSR_TDRE BIT(1) |
| #define MLB_USIO_SSR_RDRF BIT(2) |
| #define MLB_USIO_SSR_ORE BIT(3) |
| #define MLB_USIO_SSR_FRE BIT(4) |
| #define MLB_USIO_SSR_PE BIT(5) |
| #define MLB_USIO_SSR_REC BIT(7) |
| #define MLB_USIO_SSR_BRK BIT(8) |
| #define MLB_USIO_FCR_FE1 BIT(0) |
| #define MLB_USIO_FCR_FE2 BIT(1) |
| #define MLB_USIO_FCR_FCL1 BIT(2) |
| #define MLB_USIO_FCR_FCL2 BIT(3) |
| #define MLB_USIO_FCR_FSET BIT(4) |
| #define MLB_USIO_FCR_FTIE BIT(9) |
| #define MLB_USIO_FCR_FDRQ BIT(10) |
| #define MLB_USIO_FCR_FRIIE BIT(11) |
| |
| static void mlb_usio_stop_tx(struct uart_port *port) |
| { |
| writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FTIE, |
| port->membase + MLB_USIO_REG_FCR); |
| writeb(readb(port->membase + MLB_USIO_REG_SCR) & ~MLB_USIO_SCR_TBIE, |
| port->membase + MLB_USIO_REG_SCR); |
| } |
| |
| static void mlb_usio_tx_chars(struct uart_port *port) |
| { |
| struct circ_buf *xmit = &port->state->xmit; |
| int count; |
| |
| writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FTIE, |
| port->membase + MLB_USIO_REG_FCR); |
| writeb(readb(port->membase + MLB_USIO_REG_SCR) & |
| ~(MLB_USIO_SCR_TIE | MLB_USIO_SCR_TBIE), |
| port->membase + MLB_USIO_REG_SCR); |
| |
| if (port->x_char) { |
| writew(port->x_char, port->membase + MLB_USIO_REG_DR); |
| port->icount.tx++; |
| port->x_char = 0; |
| return; |
| } |
| if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { |
| mlb_usio_stop_tx(port); |
| return; |
| } |
| |
| count = port->fifosize - |
| (readw(port->membase + MLB_USIO_REG_FBYTE) & 0xff); |
| |
| do { |
| writew(xmit->buf[xmit->tail], port->membase + MLB_USIO_REG_DR); |
| |
| uart_xmit_advance(port, 1); |
| if (uart_circ_empty(xmit)) |
| break; |
| |
| } while (--count > 0); |
| |
| writew(readw(port->membase + MLB_USIO_REG_FCR) & ~MLB_USIO_FCR_FDRQ, |
| port->membase + MLB_USIO_REG_FCR); |
| |
| writeb(readb(port->membase + MLB_USIO_REG_SCR) | MLB_USIO_SCR_TBIE, |
| port->membase + MLB_USIO_REG_SCR); |
| |
| if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
| uart_write_wakeup(port); |
| |
| if (uart_circ_empty(xmit)) |
| mlb_usio_stop_tx(port); |
| } |
| |
| static void mlb_usio_start_tx(struct uart_port *port) |
| { |
| u16 fcr = readw(port->membase + MLB_USIO_REG_FCR); |
| |
| writew(fcr | MLB_USIO_FCR_FTIE, port->membase + MLB_USIO_REG_FCR); |
| if (!(fcr & MLB_USIO_FCR_FDRQ)) |
| return; |
| |
| writeb(readb(port->membase + MLB_USIO_REG_SCR) | MLB_USIO_SCR_TBIE, |
| port->membase + MLB_USIO_REG_SCR); |
| |
| if (readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TBI) |
| mlb_usio_tx_chars(port); |
| } |
| |
| static void mlb_usio_stop_rx(struct uart_port *port) |
| { |
| writeb(readb(port->membase + MLB_USIO_REG_SCR) & ~MLB_USIO_SCR_RIE, |
| port->membase + MLB_USIO_REG_SCR); |
| } |
| |
| static void mlb_usio_enable_ms(struct uart_port *port) |
| { |
| writeb(readb(port->membase + MLB_USIO_REG_SCR) | |
| MLB_USIO_SCR_RIE | MLB_USIO_SCR_RXE, |
| port->membase + MLB_USIO_REG_SCR); |
| } |
| |
| static void mlb_usio_rx_chars(struct uart_port *port) |
| { |
| struct tty_port *ttyport = &port->state->port; |
| u8 flag = 0, ch = 0; |
| u8 status; |
| int max_count = 2; |
| |
| while (max_count--) { |
| status = readb(port->membase + MLB_USIO_REG_SSR); |
| |
| if (!(status & MLB_USIO_SSR_RDRF)) |
| break; |
| |
| if (!(status & (MLB_USIO_SSR_ORE | MLB_USIO_SSR_FRE | |
| MLB_USIO_SSR_PE))) { |
| ch = readw(port->membase + MLB_USIO_REG_DR); |
| flag = TTY_NORMAL; |
| port->icount.rx++; |
| if (uart_handle_sysrq_char(port, ch)) |
| continue; |
| uart_insert_char(port, status, MLB_USIO_SSR_ORE, |
| ch, flag); |
| continue; |
| } |
| if (status & MLB_USIO_SSR_PE) |
| port->icount.parity++; |
| if (status & MLB_USIO_SSR_ORE) |
| port->icount.overrun++; |
| status &= port->read_status_mask; |
| if (status & MLB_USIO_SSR_BRK) { |
| flag = TTY_BREAK; |
| ch = 0; |
| } else |
| if (status & MLB_USIO_SSR_PE) { |
| flag = TTY_PARITY; |
| ch = 0; |
| } else |
| if (status & MLB_USIO_SSR_FRE) { |
| flag = TTY_FRAME; |
| ch = 0; |
| } |
| if (flag) |
| uart_insert_char(port, status, MLB_USIO_SSR_ORE, |
| ch, flag); |
| |
| writeb(readb(port->membase + MLB_USIO_REG_SSR) | |
| MLB_USIO_SSR_REC, |
| port->membase + MLB_USIO_REG_SSR); |
| |
| max_count = readw(port->membase + MLB_USIO_REG_FBYTE) >> 8; |
| writew(readw(port->membase + MLB_USIO_REG_FCR) | |
| MLB_USIO_FCR_FE2 | MLB_USIO_FCR_FRIIE, |
| port->membase + MLB_USIO_REG_FCR); |
| } |
| |
| tty_flip_buffer_push(ttyport); |
| } |
| |
| static irqreturn_t mlb_usio_rx_irq(int irq, void *dev_id) |
| { |
| struct uart_port *port = dev_id; |
| |
| spin_lock(&port->lock); |
| mlb_usio_rx_chars(port); |
| spin_unlock(&port->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t mlb_usio_tx_irq(int irq, void *dev_id) |
| { |
| struct uart_port *port = dev_id; |
| |
| spin_lock(&port->lock); |
| if (readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TBI) |
| mlb_usio_tx_chars(port); |
| spin_unlock(&port->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static unsigned int mlb_usio_tx_empty(struct uart_port *port) |
| { |
| return (readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TBI) ? |
| TIOCSER_TEMT : 0; |
| } |
| |
| static void mlb_usio_set_mctrl(struct uart_port *port, unsigned int mctrl) |
| { |
| } |
| |
| static unsigned int mlb_usio_get_mctrl(struct uart_port *port) |
| { |
| return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; |
| |
| } |
| |
| static void mlb_usio_break_ctl(struct uart_port *port, int break_state) |
| { |
| } |
| |
| static int mlb_usio_startup(struct uart_port *port) |
| { |
| const char *portname = to_platform_device(port->dev)->name; |
| unsigned long flags; |
| int ret, index = port->line; |
| unsigned char escr; |
| |
| ret = request_irq(mlb_usio_irq[index][RX], mlb_usio_rx_irq, |
| 0, portname, port); |
| if (ret) |
| return ret; |
| ret = request_irq(mlb_usio_irq[index][TX], mlb_usio_tx_irq, |
| 0, portname, port); |
| if (ret) { |
| free_irq(mlb_usio_irq[index][RX], port); |
| return ret; |
| } |
| |
| escr = readb(port->membase + MLB_USIO_REG_ESCR); |
| if (of_property_read_bool(port->dev->of_node, "auto-flow-control")) |
| escr |= MLB_USIO_ESCR_FLWEN; |
| spin_lock_irqsave(&port->lock, flags); |
| writeb(0, port->membase + MLB_USIO_REG_SCR); |
| writeb(escr, port->membase + MLB_USIO_REG_ESCR); |
| writeb(MLB_USIO_SCR_UPCL, port->membase + MLB_USIO_REG_SCR); |
| writeb(MLB_USIO_SSR_REC, port->membase + MLB_USIO_REG_SSR); |
| writew(0, port->membase + MLB_USIO_REG_FCR); |
| writew(MLB_USIO_FCR_FCL1 | MLB_USIO_FCR_FCL2, |
| port->membase + MLB_USIO_REG_FCR); |
| writew(MLB_USIO_FCR_FE1 | MLB_USIO_FCR_FE2 | MLB_USIO_FCR_FRIIE, |
| port->membase + MLB_USIO_REG_FCR); |
| writew(0, port->membase + MLB_USIO_REG_FBYTE); |
| writew(BIT(12), port->membase + MLB_USIO_REG_FBYTE); |
| |
| writeb(MLB_USIO_SCR_TXE | MLB_USIO_SCR_RIE | MLB_USIO_SCR_TBIE | |
| MLB_USIO_SCR_RXE, port->membase + MLB_USIO_REG_SCR); |
| spin_unlock_irqrestore(&port->lock, flags); |
| |
| return 0; |
| } |
| |
| static void mlb_usio_shutdown(struct uart_port *port) |
| { |
| int index = port->line; |
| |
| free_irq(mlb_usio_irq[index][RX], port); |
| free_irq(mlb_usio_irq[index][TX], port); |
| } |
| |
| static void mlb_usio_set_termios(struct uart_port *port, |
| struct ktermios *termios, |
| const struct ktermios *old) |
| { |
| unsigned int escr, smr = MLB_USIO_SMR_SOE; |
| unsigned long flags, baud, quot; |
| |
| switch (termios->c_cflag & CSIZE) { |
| case CS5: |
| escr = MLB_USIO_ESCR_L_5BIT; |
| break; |
| case CS6: |
| escr = MLB_USIO_ESCR_L_6BIT; |
| break; |
| case CS7: |
| escr = MLB_USIO_ESCR_L_7BIT; |
| break; |
| case CS8: |
| default: |
| escr = MLB_USIO_ESCR_L_8BIT; |
| break; |
| } |
| |
| if (termios->c_cflag & CSTOPB) |
| smr |= MLB_USIO_SMR_SBL; |
| |
| if (termios->c_cflag & PARENB) { |
| escr |= MLB_USIO_ESCR_PEN; |
| if (termios->c_cflag & PARODD) |
| escr |= MLB_USIO_ESCR_P; |
| } |
| /* Set hard flow control */ |
| if (of_property_read_bool(port->dev->of_node, "auto-flow-control") || |
| (termios->c_cflag & CRTSCTS)) |
| escr |= MLB_USIO_ESCR_FLWEN; |
| |
| baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk); |
| if (baud > 1) |
| quot = port->uartclk / baud - 1; |
| else |
| quot = 0; |
| |
| spin_lock_irqsave(&port->lock, flags); |
| uart_update_timeout(port, termios->c_cflag, baud); |
| port->read_status_mask = MLB_USIO_SSR_ORE | MLB_USIO_SSR_RDRF | |
| MLB_USIO_SSR_TDRE; |
| if (termios->c_iflag & INPCK) |
| port->read_status_mask |= MLB_USIO_SSR_FRE | MLB_USIO_SSR_PE; |
| |
| port->ignore_status_mask = 0; |
| if (termios->c_iflag & IGNPAR) |
| port->ignore_status_mask |= MLB_USIO_SSR_FRE | MLB_USIO_SSR_PE; |
| if ((termios->c_iflag & IGNBRK) && (termios->c_iflag & IGNPAR)) |
| port->ignore_status_mask |= MLB_USIO_SSR_ORE; |
| if ((termios->c_cflag & CREAD) == 0) |
| port->ignore_status_mask |= MLB_USIO_SSR_RDRF; |
| |
| writeb(0, port->membase + MLB_USIO_REG_SCR); |
| writeb(MLB_USIO_SCR_UPCL, port->membase + MLB_USIO_REG_SCR); |
| writeb(MLB_USIO_SSR_REC, port->membase + MLB_USIO_REG_SSR); |
| writew(0, port->membase + MLB_USIO_REG_FCR); |
| writeb(smr, port->membase + MLB_USIO_REG_SMR); |
| writeb(escr, port->membase + MLB_USIO_REG_ESCR); |
| writew(quot, port->membase + MLB_USIO_REG_BGR); |
| writew(0, port->membase + MLB_USIO_REG_FCR); |
| writew(MLB_USIO_FCR_FCL1 | MLB_USIO_FCR_FCL2 | MLB_USIO_FCR_FE1 | |
| MLB_USIO_FCR_FE2 | MLB_USIO_FCR_FRIIE, |
| port->membase + MLB_USIO_REG_FCR); |
| writew(0, port->membase + MLB_USIO_REG_FBYTE); |
| writew(BIT(12), port->membase + MLB_USIO_REG_FBYTE); |
| writeb(MLB_USIO_SCR_RIE | MLB_USIO_SCR_RXE | MLB_USIO_SCR_TBIE | |
| MLB_USIO_SCR_TXE, port->membase + MLB_USIO_REG_SCR); |
| spin_unlock_irqrestore(&port->lock, flags); |
| } |
| |
| static const char *mlb_usio_type(struct uart_port *port) |
| { |
| return ((port->type == PORT_MLB_USIO) ? USIO_NAME : NULL); |
| } |
| |
| static void mlb_usio_config_port(struct uart_port *port, int flags) |
| { |
| if (flags & UART_CONFIG_TYPE) |
| port->type = PORT_MLB_USIO; |
| } |
| |
| static const struct uart_ops mlb_usio_ops = { |
| .tx_empty = mlb_usio_tx_empty, |
| .set_mctrl = mlb_usio_set_mctrl, |
| .get_mctrl = mlb_usio_get_mctrl, |
| .stop_tx = mlb_usio_stop_tx, |
| .start_tx = mlb_usio_start_tx, |
| .stop_rx = mlb_usio_stop_rx, |
| .enable_ms = mlb_usio_enable_ms, |
| .break_ctl = mlb_usio_break_ctl, |
| .startup = mlb_usio_startup, |
| .shutdown = mlb_usio_shutdown, |
| .set_termios = mlb_usio_set_termios, |
| .type = mlb_usio_type, |
| .config_port = mlb_usio_config_port, |
| }; |
| |
| #ifdef CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE |
| |
| static void mlb_usio_console_putchar(struct uart_port *port, unsigned char c) |
| { |
| while (!(readb(port->membase + MLB_USIO_REG_SSR) & MLB_USIO_SSR_TDRE)) |
| cpu_relax(); |
| |
| writew(c, port->membase + MLB_USIO_REG_DR); |
| } |
| |
| static void mlb_usio_console_write(struct console *co, const char *s, |
| unsigned int count) |
| { |
| struct uart_port *port = &mlb_usio_ports[co->index]; |
| |
| uart_console_write(port, s, count, mlb_usio_console_putchar); |
| } |
| |
| static int __init mlb_usio_console_setup(struct console *co, char *options) |
| { |
| struct uart_port *port; |
| int baud = 115200; |
| int parity = 'n'; |
| int flow = 'n'; |
| int bits = 8; |
| |
| if (co->index >= CONFIG_SERIAL_MILBEAUT_USIO_PORTS) |
| return -ENODEV; |
| |
| port = &mlb_usio_ports[co->index]; |
| if (!port->membase) |
| return -ENODEV; |
| |
| |
| if (options) |
| uart_parse_options(options, &baud, &parity, &bits, &flow); |
| |
| if (of_property_read_bool(port->dev->of_node, "auto-flow-control")) |
| flow = 'r'; |
| |
| return uart_set_options(port, co, baud, parity, bits, flow); |
| } |
| |
| |
| static struct uart_driver mlb_usio_uart_driver; |
| static struct console mlb_usio_console = { |
| .name = USIO_UART_DEV_NAME, |
| .write = mlb_usio_console_write, |
| .device = uart_console_device, |
| .setup = mlb_usio_console_setup, |
| .flags = CON_PRINTBUFFER, |
| .index = -1, |
| .data = &mlb_usio_uart_driver, |
| }; |
| |
| static int __init mlb_usio_console_init(void) |
| { |
| register_console(&mlb_usio_console); |
| return 0; |
| } |
| console_initcall(mlb_usio_console_init); |
| |
| |
| static void mlb_usio_early_console_write(struct console *co, const char *s, |
| u_int count) |
| { |
| struct earlycon_device *dev = co->data; |
| |
| uart_console_write(&dev->port, s, count, mlb_usio_console_putchar); |
| } |
| |
| static int __init mlb_usio_early_console_setup(struct earlycon_device *device, |
| const char *opt) |
| { |
| if (!device->port.membase) |
| return -ENODEV; |
| device->con->write = mlb_usio_early_console_write; |
| return 0; |
| } |
| |
| OF_EARLYCON_DECLARE(mlb_usio, "socionext,milbeaut-usio-uart", |
| mlb_usio_early_console_setup); |
| |
| #define USIO_CONSOLE (&mlb_usio_console) |
| #else |
| #define USIO_CONSOLE NULL |
| #endif |
| |
| static struct uart_driver mlb_usio_uart_driver = { |
| .owner = THIS_MODULE, |
| .driver_name = USIO_NAME, |
| .dev_name = USIO_UART_DEV_NAME, |
| .cons = USIO_CONSOLE, |
| .nr = CONFIG_SERIAL_MILBEAUT_USIO_PORTS, |
| }; |
| |
| static int mlb_usio_probe(struct platform_device *pdev) |
| { |
| struct clk *clk = devm_clk_get(&pdev->dev, NULL); |
| struct uart_port *port; |
| struct resource *res; |
| int index = 0; |
| int ret; |
| |
| if (IS_ERR(clk)) { |
| dev_err(&pdev->dev, "Missing clock\n"); |
| return PTR_ERR(clk); |
| } |
| ret = clk_prepare_enable(clk); |
| if (ret) { |
| dev_err(&pdev->dev, "Clock enable failed: %d\n", ret); |
| return ret; |
| } |
| of_property_read_u32(pdev->dev.of_node, "index", &index); |
| port = &mlb_usio_ports[index]; |
| |
| port->private_data = (void *)clk; |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (res == NULL) { |
| dev_err(&pdev->dev, "Missing regs\n"); |
| ret = -ENODEV; |
| goto failed; |
| } |
| port->membase = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| |
| ret = platform_get_irq_byname(pdev, "rx"); |
| mlb_usio_irq[index][RX] = ret; |
| |
| ret = platform_get_irq_byname(pdev, "tx"); |
| mlb_usio_irq[index][TX] = ret; |
| |
| port->irq = mlb_usio_irq[index][RX]; |
| port->uartclk = clk_get_rate(clk); |
| port->fifosize = 128; |
| port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE); |
| port->iotype = UPIO_MEM32; |
| port->flags = UPF_BOOT_AUTOCONF | UPF_SPD_VHI; |
| port->line = index; |
| port->ops = &mlb_usio_ops; |
| port->dev = &pdev->dev; |
| |
| ret = uart_add_one_port(&mlb_usio_uart_driver, port); |
| if (ret) { |
| dev_err(&pdev->dev, "Adding port failed: %d\n", ret); |
| goto failed; |
| } |
| return 0; |
| |
| failed: |
| clk_disable_unprepare(clk); |
| |
| return ret; |
| } |
| |
| static int mlb_usio_remove(struct platform_device *pdev) |
| { |
| struct uart_port *port = &mlb_usio_ports[pdev->id]; |
| struct clk *clk = port->private_data; |
| |
| uart_remove_one_port(&mlb_usio_uart_driver, port); |
| clk_disable_unprepare(clk); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mlb_usio_dt_ids[] = { |
| { .compatible = "socionext,milbeaut-usio-uart" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, mlb_usio_dt_ids); |
| |
| static struct platform_driver mlb_usio_driver = { |
| .probe = mlb_usio_probe, |
| .remove = mlb_usio_remove, |
| .driver = { |
| .name = USIO_NAME, |
| .of_match_table = mlb_usio_dt_ids, |
| }, |
| }; |
| |
| static int __init mlb_usio_init(void) |
| { |
| int ret = uart_register_driver(&mlb_usio_uart_driver); |
| |
| if (ret) { |
| pr_err("%s: uart registration failed: %d\n", __func__, ret); |
| return ret; |
| } |
| ret = platform_driver_register(&mlb_usio_driver); |
| if (ret) { |
| uart_unregister_driver(&mlb_usio_uart_driver); |
| pr_err("%s: drv registration failed: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit mlb_usio_exit(void) |
| { |
| platform_driver_unregister(&mlb_usio_driver); |
| uart_unregister_driver(&mlb_usio_uart_driver); |
| } |
| |
| module_init(mlb_usio_init); |
| module_exit(mlb_usio_exit); |
| |
| MODULE_AUTHOR("SOCIONEXT"); |
| MODULE_DESCRIPTION("MILBEAUT_USIO/UART Driver"); |
| MODULE_LICENSE("GPL"); |